~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/scripts/dtc/include-prefixes/arm64/mediatek/mt2712e.dtsi

Version: ~ [ linux-6.12-rc7 ] ~ [ linux-6.11.7 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.60 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.116 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.171 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.229 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.285 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.323 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.12 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 /*
  2  * Copyright (c) 2017 MediaTek Inc.
  3  * Author: YT Shen <yt.shen@mediatek.com>
  4  *
  5  * SPDX-License-Identifier: (GPL-2.0 OR MIT)
  6  */
  7 
  8 #include <dt-bindings/clock/mt2712-clk.h>
  9 #include <dt-bindings/interrupt-controller/irq.h>
 10 #include <dt-bindings/interrupt-controller/arm-gic.h>
 11 #include <dt-bindings/memory/mt2712-larb-port.h>
 12 #include <dt-bindings/phy/phy.h>
 13 #include <dt-bindings/power/mt2712-power.h>
 14 #include "mt2712-pinfunc.h"
 15 
 16 / {
 17         compatible = "mediatek,mt2712";
 18         interrupt-parent = <&sysirq>;
 19         #address-cells = <2>;
 20         #size-cells = <2>;
 21 
 22         cluster0_opp: opp-table-0 {
 23                 compatible = "operating-points-v2";
 24                 opp-shared;
 25                 opp00 {
 26                         opp-hz = /bits/ 64 <598000000>;
 27                         opp-microvolt = <1000000>;
 28                 };
 29                 opp01 {
 30                         opp-hz = /bits/ 64 <702000000>;
 31                         opp-microvolt = <1000000>;
 32                 };
 33                 opp02 {
 34                         opp-hz = /bits/ 64 <793000000>;
 35                         opp-microvolt = <1000000>;
 36                 };
 37         };
 38 
 39         cluster1_opp: opp-table-1 {
 40                 compatible = "operating-points-v2";
 41                 opp-shared;
 42                 opp00 {
 43                         opp-hz = /bits/ 64 <598000000>;
 44                         opp-microvolt = <1000000>;
 45                 };
 46                 opp01 {
 47                         opp-hz = /bits/ 64 <702000000>;
 48                         opp-microvolt = <1000000>;
 49                 };
 50                 opp02 {
 51                         opp-hz = /bits/ 64 <793000000>;
 52                         opp-microvolt = <1000000>;
 53                 };
 54                 opp03 {
 55                         opp-hz = /bits/ 64 <897000000>;
 56                         opp-microvolt = <1000000>;
 57                 };
 58                 opp04 {
 59                         opp-hz = /bits/ 64 <1001000000>;
 60                         opp-microvolt = <1000000>;
 61                 };
 62         };
 63 
 64         cpus {
 65                 #address-cells = <1>;
 66                 #size-cells = <0>;
 67 
 68                 cpu-map {
 69                         cluster0 {
 70                                 core0 {
 71                                         cpu = <&cpu0>;
 72                                 };
 73                                 core1 {
 74                                         cpu = <&cpu1>;
 75                                 };
 76                         };
 77 
 78                         cluster1 {
 79                                 core0 {
 80                                         cpu = <&cpu2>;
 81                                 };
 82                         };
 83                 };
 84 
 85                 cpu0: cpu@0 {
 86                         device_type = "cpu";
 87                         compatible = "arm,cortex-a35";
 88                         reg = <0x000>;
 89                         clocks = <&mcucfg CLK_MCU_MP0_SEL>,
 90                                 <&topckgen CLK_TOP_F_MP0_PLL1>;
 91                         clock-names = "cpu", "intermediate";
 92                         proc-supply = <&cpus_fixed_vproc0>;
 93                         operating-points-v2 = <&cluster0_opp>;
 94                         cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 95                 };
 96 
 97                 cpu1: cpu@1 {
 98                         device_type = "cpu";
 99                         compatible = "arm,cortex-a35";
100                         reg = <0x001>;
101                         enable-method = "psci";
102                         clocks = <&mcucfg CLK_MCU_MP0_SEL>,
103                                 <&topckgen CLK_TOP_F_MP0_PLL1>;
104                         clock-names = "cpu", "intermediate";
105                         proc-supply = <&cpus_fixed_vproc0>;
106                         operating-points-v2 = <&cluster0_opp>;
107                         cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
108                 };
109 
110                 cpu2: cpu@200 {
111                         device_type = "cpu";
112                         compatible = "arm,cortex-a72";
113                         reg = <0x200>;
114                         enable-method = "psci";
115                         clocks = <&mcucfg CLK_MCU_MP2_SEL>,
116                                 <&topckgen CLK_TOP_F_BIG_PLL1>;
117                         clock-names = "cpu", "intermediate";
118                         proc-supply = <&cpus_fixed_vproc1>;
119                         operating-points-v2 = <&cluster1_opp>;
120                         cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
121                 };
122 
123                 idle-states {
124                         entry-method = "psci";
125 
126                         CPU_SLEEP_0: cpu-sleep-0 {
127                                 compatible = "arm,idle-state";
128                                 local-timer-stop;
129                                 entry-latency-us = <100>;
130                                 exit-latency-us = <80>;
131                                 min-residency-us = <2000>;
132                                 arm,psci-suspend-param = <0x0010000>;
133                         };
134 
135                         CLUSTER_SLEEP_0: cluster-sleep-0 {
136                                 compatible = "arm,idle-state";
137                                 local-timer-stop;
138                                 entry-latency-us = <350>;
139                                 exit-latency-us = <80>;
140                                 min-residency-us = <3000>;
141                                 arm,psci-suspend-param = <0x1010000>;
142                         };
143                 };
144         };
145 
146         psci {
147                 compatible = "arm,psci-0.2";
148                 method = "smc";
149         };
150 
151         baud_clk: dummy26m {
152                 compatible = "fixed-clock";
153                 clock-frequency = <26000000>;
154                 #clock-cells = <0>;
155         };
156 
157         sys_clk: dummyclk {
158                 compatible = "fixed-clock";
159                 clock-frequency = <26000000>;
160                 #clock-cells = <0>;
161         };
162 
163         clk26m: oscillator-26m {
164                 compatible = "fixed-clock";
165                 #clock-cells = <0>;
166                 clock-frequency = <26000000>;
167                 clock-output-names = "clk26m";
168         };
169 
170         clk32k: oscillator-32k {
171                 compatible = "fixed-clock";
172                 #clock-cells = <0>;
173                 clock-frequency = <32768>;
174                 clock-output-names = "clk32k";
175         };
176 
177         clkfpc: oscillator-50m {
178                 compatible = "fixed-clock";
179                 #clock-cells = <0>;
180                 clock-frequency = <50000000>;
181                 clock-output-names = "clkfpc";
182         };
183 
184         clkaud_ext_i_0: oscillator-aud0 {
185                 compatible = "fixed-clock";
186                 #clock-cells = <0>;
187                 clock-frequency = <6500000>;
188                 clock-output-names = "clkaud_ext_i_0";
189         };
190 
191         clkaud_ext_i_1: oscillator-aud1 {
192                 compatible = "fixed-clock";
193                 #clock-cells = <0>;
194                 clock-frequency = <196608000>;
195                 clock-output-names = "clkaud_ext_i_1";
196         };
197 
198         clkaud_ext_i_2: oscillator-aud2 {
199                 compatible = "fixed-clock";
200                 #clock-cells = <0>;
201                 clock-frequency = <180633600>;
202                 clock-output-names = "clkaud_ext_i_2";
203         };
204 
205         clki2si0_mck_i: oscillator-i2s0 {
206                 compatible = "fixed-clock";
207                 #clock-cells = <0>;
208                 clock-frequency = <30000000>;
209                 clock-output-names = "clki2si0_mck_i";
210         };
211 
212         clki2si1_mck_i: oscillator-i2s1 {
213                 compatible = "fixed-clock";
214                 #clock-cells = <0>;
215                 clock-frequency = <30000000>;
216                 clock-output-names = "clki2si1_mck_i";
217         };
218 
219         clki2si2_mck_i: oscillator-i2s2 {
220                 compatible = "fixed-clock";
221                 #clock-cells = <0>;
222                 clock-frequency = <30000000>;
223                 clock-output-names = "clki2si2_mck_i";
224         };
225 
226         clktdmin_mclk_i: oscillator-mclk {
227                 compatible = "fixed-clock";
228                 #clock-cells = <0>;
229                 clock-frequency = <30000000>;
230                 clock-output-names = "clktdmin_mclk_i";
231         };
232 
233         timer {
234                 compatible = "arm,armv8-timer";
235                 interrupt-parent = <&gic>;
236                 interrupts = <GIC_PPI 13
237                               (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
238                              <GIC_PPI 14
239                               (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
240                              <GIC_PPI 11
241                               (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
242                              <GIC_PPI 10
243                               (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>;
244         };
245 
246         topckgen: syscon@10000000 {
247                 compatible = "mediatek,mt2712-topckgen", "syscon";
248                 reg = <0 0x10000000 0 0x1000>;
249                 #clock-cells = <1>;
250         };
251 
252         infracfg: clock-controller@10001000 {
253                 compatible = "mediatek,mt2712-infracfg", "syscon";
254                 reg = <0 0x10001000 0 0x1000>;
255                 #clock-cells = <1>;
256                 #reset-cells = <1>;
257         };
258 
259         pericfg: syscon@10003000 {
260                 compatible = "mediatek,mt2712-pericfg", "syscon";
261                 reg = <0 0x10003000 0 0x1000>;
262                 #clock-cells = <1>;
263         };
264 
265         syscfg_pctl_a: syscon@10005000 {
266                 compatible = "mediatek,mt2712-pctl-a-syscfg", "syscon";
267                 reg = <0 0x10005000 0 0x1000>;
268         };
269 
270         pio: pinctrl@1000b000 {
271                 compatible = "mediatek,mt2712-pinctrl";
272                 reg = <0 0x1000b000 0 0x1000>;
273                 mediatek,pctl-regmap = <&syscfg_pctl_a>;
274                 gpio-controller;
275                 #gpio-cells = <2>;
276                 interrupt-controller;
277                 #interrupt-cells = <2>;
278                 interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
279         };
280 
281         scpsys: power-controller@10006000 {
282                 compatible = "mediatek,mt2712-scpsys", "syscon";
283                 #power-domain-cells = <1>;
284                 reg = <0 0x10006000 0 0x1000>;
285                 clocks = <&topckgen CLK_TOP_MM_SEL>,
286                          <&topckgen CLK_TOP_MFG_SEL>,
287                          <&topckgen CLK_TOP_VENC_SEL>,
288                          <&topckgen CLK_TOP_JPGDEC_SEL>,
289                          <&topckgen CLK_TOP_A1SYS_HP_SEL>,
290                          <&topckgen CLK_TOP_VDEC_SEL>;
291                 clock-names = "mm", "mfg", "venc",
292                         "jpgdec", "audio", "vdec";
293                 infracfg = <&infracfg>;
294         };
295 
296         uart5: serial@1000f000 {
297                 compatible = "mediatek,mt2712-uart",
298                              "mediatek,mt6577-uart";
299                 reg = <0 0x1000f000 0 0x400>;
300                 interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
301                 clocks = <&baud_clk>, <&sys_clk>;
302                 clock-names = "baud", "bus";
303                 dmas = <&apdma 10
304                         &apdma 11>;
305                 dma-names = "tx", "rx";
306                 status = "disabled";
307         };
308 
309         rtc: rtc@10011000 {
310                 compatible = "mediatek,mt2712-rtc";
311                 reg = <0 0x10011000 0 0x1000>;
312                 interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>;
313         };
314 
315         spis1: spi@10013000 {
316                 compatible = "mediatek,mt2712-spi-slave";
317                 reg = <0 0x10013000 0 0x100>;
318                 interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_LOW>;
319                 clocks = <&infracfg CLK_INFRA_AO_SPI1>;
320                 clock-names = "spi";
321                 assigned-clocks = <&topckgen CLK_TOP_SPISLV_SEL>;
322                 assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
323                 status = "disabled";
324         };
325 
326         iommu0: iommu@10205000 {
327                 compatible = "mediatek,mt2712-m4u";
328                 reg = <0 0x10205000 0 0x1000>;
329                 interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_LOW>;
330                 clocks = <&infracfg CLK_INFRA_M4U>;
331                 clock-names = "bclk";
332                 mediatek,infracfg = <&infracfg>;
333                 mediatek,larbs = <&larb0>, <&larb1>, <&larb2>,
334                                  <&larb3>, <&larb6>;
335                 #iommu-cells = <1>;
336         };
337 
338         apmixedsys: syscon@10209000 {
339                 compatible = "mediatek,mt2712-apmixedsys", "syscon";
340                 reg = <0 0x10209000 0 0x1000>;
341                 #clock-cells = <1>;
342         };
343 
344         iommu1: iommu@1020a000 {
345                 compatible = "mediatek,mt2712-m4u";
346                 reg = <0 0x1020a000 0 0x1000>;
347                 interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>;
348                 clocks = <&infracfg CLK_INFRA_M4U>;
349                 clock-names = "bclk";
350                 mediatek,infracfg = <&infracfg>;
351                 mediatek,larbs = <&larb4>, <&larb5>, <&larb7>;
352                 #iommu-cells = <1>;
353         };
354 
355         mcucfg: syscon@10220000 {
356                 compatible = "mediatek,mt2712-mcucfg", "syscon";
357                 reg = <0 0x10220000 0 0x1000>;
358                 #clock-cells = <1>;
359         };
360 
361         sysirq: interrupt-controller@10220a80 {
362                 compatible = "mediatek,mt2712-sysirq",
363                              "mediatek,mt6577-sysirq";
364                 interrupt-controller;
365                 #interrupt-cells = <3>;
366                 interrupt-parent = <&gic>;
367                 reg = <0 0x10220a80 0 0x40>;
368         };
369 
370         gic: interrupt-controller@10510000 {
371                 compatible = "arm,gic-400";
372                 #interrupt-cells = <3>;
373                 interrupt-parent = <&gic>;
374                 interrupt-controller;
375                 reg = <0 0x10510000 0 0x10000>,
376                       <0 0x10520000 0 0x20000>,
377                       <0 0x10540000 0 0x20000>,
378                       <0 0x10560000 0 0x20000>;
379                 interrupts = <GIC_PPI 9
380                          (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_HIGH)>;
381         };
382 
383         apdma: dma-controller@11000400 {
384                 compatible = "mediatek,mt2712-uart-dma",
385                              "mediatek,mt6577-uart-dma";
386                 reg = <0 0x11000400 0 0x80>,
387                       <0 0x11000480 0 0x80>,
388                       <0 0x11000500 0 0x80>,
389                       <0 0x11000580 0 0x80>,
390                       <0 0x11000600 0 0x80>,
391                       <0 0x11000680 0 0x80>,
392                       <0 0x11000700 0 0x80>,
393                       <0 0x11000780 0 0x80>,
394                       <0 0x11000800 0 0x80>,
395                       <0 0x11000880 0 0x80>,
396                       <0 0x11000900 0 0x80>,
397                       <0 0x11000980 0 0x80>;
398                 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
399                              <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
400                              <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
401                              <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
402                              <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
403                              <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
404                              <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
405                              <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>,
406                              <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>,
407                              <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>,
408                              <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
409                              <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
410                 dma-requests = <12>;
411                 clocks = <&pericfg CLK_PERI_AP_DMA>;
412                 clock-names = "apdma";
413                 #dma-cells = <1>;
414         };
415 
416         auxadc: adc@11001000 {
417                 compatible = "mediatek,mt2712-auxadc";
418                 reg = <0 0x11001000 0 0x1000>;
419                 clocks = <&pericfg CLK_PERI_AUXADC>;
420                 clock-names = "main";
421                 #io-channel-cells = <1>;
422                 status = "disabled";
423         };
424 
425         uart0: serial@11002000 {
426                 compatible = "mediatek,mt2712-uart",
427                              "mediatek,mt6577-uart";
428                 reg = <0 0x11002000 0 0x400>;
429                 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
430                 clocks = <&baud_clk>, <&sys_clk>;
431                 clock-names = "baud", "bus";
432                 dmas = <&apdma 0
433                         &apdma 1>;
434                 dma-names = "tx", "rx";
435                 status = "disabled";
436         };
437 
438         uart1: serial@11003000 {
439                 compatible = "mediatek,mt2712-uart",
440                              "mediatek,mt6577-uart";
441                 reg = <0 0x11003000 0 0x400>;
442                 interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
443                 clocks = <&baud_clk>, <&sys_clk>;
444                 clock-names = "baud", "bus";
445                 dmas = <&apdma 2
446                         &apdma 3>;
447                 dma-names = "tx", "rx";
448                 status = "disabled";
449         };
450 
451         uart2: serial@11004000 {
452                 compatible = "mediatek,mt2712-uart",
453                              "mediatek,mt6577-uart";
454                 reg = <0 0x11004000 0 0x400>;
455                 interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
456                 clocks = <&baud_clk>, <&sys_clk>;
457                 clock-names = "baud", "bus";
458                 dmas = <&apdma 4
459                         &apdma 5>;
460                 dma-names = "tx", "rx";
461                 status = "disabled";
462         };
463 
464         uart3: serial@11005000 {
465                 compatible = "mediatek,mt2712-uart",
466                              "mediatek,mt6577-uart";
467                 reg = <0 0x11005000 0 0x400>;
468                 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
469                 clocks = <&baud_clk>, <&sys_clk>;
470                 clock-names = "baud", "bus";
471                 dmas = <&apdma 6
472                         &apdma 7>;
473                 dma-names = "tx", "rx";
474                 status = "disabled";
475         };
476 
477         pwm: pwm@11006000 {
478                 compatible = "mediatek,mt2712-pwm";
479                 reg = <0 0x11006000 0 0x1000>;
480                 #pwm-cells = <2>;
481                 interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
482                 clocks = <&topckgen CLK_TOP_PWM_SEL>,
483                          <&pericfg CLK_PERI_PWM>,
484                          <&pericfg CLK_PERI_PWM0>,
485                          <&pericfg CLK_PERI_PWM1>,
486                          <&pericfg CLK_PERI_PWM2>,
487                          <&pericfg CLK_PERI_PWM3>,
488                          <&pericfg CLK_PERI_PWM4>,
489                          <&pericfg CLK_PERI_PWM5>,
490                          <&pericfg CLK_PERI_PWM6>,
491                          <&pericfg CLK_PERI_PWM7>;
492                 clock-names = "top",
493                               "main",
494                               "pwm1",
495                               "pwm2",
496                               "pwm3",
497                               "pwm4",
498                               "pwm5",
499                               "pwm6",
500                               "pwm7",
501                               "pwm8";
502                 status = "disabled";
503         };
504 
505         i2c0: i2c@11007000 {
506                 compatible = "mediatek,mt2712-i2c";
507                 reg = <0 0x11007000 0 0x90>,
508                       <0 0x11000180 0 0x80>;
509                 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
510                 clock-div = <4>;
511                 clocks = <&pericfg CLK_PERI_I2C0>,
512                          <&pericfg CLK_PERI_AP_DMA>;
513                 clock-names = "main",
514                               "dma";
515                 #address-cells = <1>;
516                 #size-cells = <0>;
517                 status = "disabled";
518         };
519 
520         i2c1: i2c@11008000 {
521                 compatible = "mediatek,mt2712-i2c";
522                 reg = <0 0x11008000 0 0x90>,
523                       <0 0x11000200 0 0x80>;
524                 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
525                 clock-div = <4>;
526                 clocks = <&pericfg CLK_PERI_I2C1>,
527                          <&pericfg CLK_PERI_AP_DMA>;
528                 clock-names = "main",
529                               "dma";
530                 #address-cells = <1>;
531                 #size-cells = <0>;
532                 status = "disabled";
533         };
534 
535         i2c2: i2c@11009000 {
536                 compatible = "mediatek,mt2712-i2c";
537                 reg = <0 0x11009000 0 0x90>,
538                       <0 0x11000280 0 0x80>;
539                 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
540                 clock-div = <4>;
541                 clocks = <&pericfg CLK_PERI_I2C2>,
542                          <&pericfg CLK_PERI_AP_DMA>;
543                 clock-names = "main",
544                               "dma";
545                 #address-cells = <1>;
546                 #size-cells = <0>;
547                 status = "disabled";
548         };
549 
550         spi0: spi@1100a000 {
551                 compatible = "mediatek,mt2712-spi";
552                 #address-cells = <1>;
553                 #size-cells = <0>;
554                 reg = <0 0x1100a000 0 0x100>;
555                 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>;
556                 clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
557                          <&topckgen CLK_TOP_SPI_SEL>,
558                          <&pericfg CLK_PERI_SPI0>;
559                 clock-names = "parent-clk", "sel-clk", "spi-clk";
560                 status = "disabled";
561         };
562 
563         nandc: nand-controller@1100e000 {
564                 compatible = "mediatek,mt2712-nfc";
565                 reg = <0 0x1100e000 0 0x1000>;
566                 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
567                 clocks = <&topckgen CLK_TOP_NFI2X_EN>, <&pericfg CLK_PERI_NFI>;
568                 clock-names = "nfi_clk", "pad_clk";
569                 ecc-engine = <&bch>;
570                 #address-cells = <1>;
571                 #size-cells = <0>;
572                 status = "disabled";
573         };
574 
575         bch: ecc@1100f000 {
576                 compatible = "mediatek,mt2712-ecc";
577                 reg = <0 0x1100f000 0 0x1000>;
578                 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>;
579                 clocks = <&topckgen CLK_TOP_NFI1X_CK_EN>;
580                 clock-names = "nfiecc_clk";
581                 status = "disabled";
582         };
583 
584         i2c3: i2c@11010000 {
585                 compatible = "mediatek,mt2712-i2c";
586                 reg = <0 0x11010000 0 0x90>,
587                       <0 0x11000300 0 0x80>;
588                 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
589                 clock-div = <4>;
590                 clocks = <&pericfg CLK_PERI_I2C3>,
591                          <&pericfg CLK_PERI_AP_DMA>;
592                 clock-names = "main",
593                               "dma";
594                 #address-cells = <1>;
595                 #size-cells = <0>;
596                 status = "disabled";
597         };
598 
599         i2c4: i2c@11011000 {
600                 compatible = "mediatek,mt2712-i2c";
601                 reg = <0 0x11011000 0 0x90>,
602                       <0 0x11000380 0 0x80>;
603                 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
604                 clock-div = <4>;
605                 clocks = <&pericfg CLK_PERI_I2C4>,
606                          <&pericfg CLK_PERI_AP_DMA>;
607                 clock-names = "main",
608                               "dma";
609                 #address-cells = <1>;
610                 #size-cells = <0>;
611                 status = "disabled";
612         };
613 
614         i2c5: i2c@11013000 {
615                 compatible = "mediatek,mt2712-i2c";
616                 reg = <0 0x11013000 0 0x90>,
617                       <0 0x11000100 0 0x80>;
618                 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
619                 clock-div = <4>;
620                 clocks = <&pericfg CLK_PERI_I2C5>,
621                          <&pericfg CLK_PERI_AP_DMA>;
622                 clock-names = "main",
623                               "dma";
624                 #address-cells = <1>;
625                 #size-cells = <0>;
626                 status = "disabled";
627         };
628 
629         spi2: spi@11015000 {
630                 compatible = "mediatek,mt2712-spi";
631                 #address-cells = <1>;
632                 #size-cells = <0>;
633                 reg = <0 0x11015000 0 0x100>;
634                 interrupts = <GIC_SPI 284 IRQ_TYPE_LEVEL_LOW>;
635                 clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
636                          <&topckgen CLK_TOP_SPI_SEL>,
637                          <&pericfg CLK_PERI_SPI2>;
638                 clock-names = "parent-clk", "sel-clk", "spi-clk";
639                 status = "disabled";
640         };
641 
642         spi3: spi@11016000 {
643                 compatible = "mediatek,mt2712-spi";
644                 #address-cells = <1>;
645                 #size-cells = <0>;
646                 reg = <0 0x11016000 0 0x100>;
647                 interrupts = <GIC_SPI 285 IRQ_TYPE_LEVEL_LOW>;
648                 clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
649                          <&topckgen CLK_TOP_SPI_SEL>,
650                          <&pericfg CLK_PERI_SPI3>;
651                 clock-names = "parent-clk", "sel-clk", "spi-clk";
652                 status = "disabled";
653         };
654 
655         spi4: spi@10012000 {
656                 compatible = "mediatek,mt2712-spi";
657                 #address-cells = <1>;
658                 #size-cells = <0>;
659                 reg = <0 0x10012000 0 0x100>;
660                 interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_LOW>;
661                 clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
662                          <&topckgen CLK_TOP_SPI_SEL>,
663                          <&infracfg CLK_INFRA_AO_SPI0>;
664                 clock-names = "parent-clk", "sel-clk", "spi-clk";
665                 status = "disabled";
666         };
667 
668         spi5: spi@11018000 {
669                 compatible = "mediatek,mt2712-spi";
670                 #address-cells = <1>;
671                 #size-cells = <0>;
672                 reg = <0 0x11018000 0 0x100>;
673                 interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_LOW>;
674                 clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
675                          <&topckgen CLK_TOP_SPI_SEL>,
676                          <&pericfg CLK_PERI_SPI5>;
677                 clock-names = "parent-clk", "sel-clk", "spi-clk";
678                 status = "disabled";
679         };
680 
681         uart4: serial@11019000 {
682                 compatible = "mediatek,mt2712-uart",
683                              "mediatek,mt6577-uart";
684                 reg = <0 0x11019000 0 0x400>;
685                 interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_LOW>;
686                 clocks = <&baud_clk>, <&sys_clk>;
687                 clock-names = "baud", "bus";
688                 dmas = <&apdma 8
689                         &apdma 9>;
690                 dma-names = "tx", "rx";
691                 status = "disabled";
692         };
693 
694         stmmac_axi_setup: stmmac-axi-config {
695                 snps,wr_osr_lmt = <0x7>;
696                 snps,rd_osr_lmt = <0x7>;
697                 snps,blen = <0 0 0 0 16 8 4>;
698         };
699 
700         mtl_rx_setup: rx-queues-config {
701                 snps,rx-queues-to-use = <1>;
702                 snps,rx-sched-sp;
703                 queue0 {
704                         snps,dcb-algorithm;
705                         snps,map-to-dma-channel = <0x0>;
706                         snps,priority = <0x0>;
707                 };
708         };
709 
710         mtl_tx_setup: tx-queues-config {
711                 snps,tx-queues-to-use = <3>;
712                 snps,tx-sched-wrr;
713                 queue0 {
714                         snps,weight = <0x10>;
715                         snps,dcb-algorithm;
716                         snps,priority = <0x0>;
717                 };
718                 queue1 {
719                         snps,weight = <0x11>;
720                         snps,dcb-algorithm;
721                         snps,priority = <0x1>;
722                 };
723                 queue2 {
724                         snps,weight = <0x12>;
725                         snps,dcb-algorithm;
726                         snps,priority = <0x2>;
727                 };
728         };
729 
730         eth: ethernet@1101c000 {
731                 compatible = "mediatek,mt2712-gmac", "snps,dwmac-4.20a";
732                 reg = <0 0x1101c000 0 0x1300>;
733                 interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
734                 interrupt-names = "macirq";
735                 mac-address = [00 55 7b b5 7d f7];
736                 clock-names = "axi",
737                               "apb",
738                               "mac_main",
739                               "ptp_ref",
740                               "rmii_internal";
741                 clocks = <&pericfg CLK_PERI_GMAC>,
742                          <&pericfg CLK_PERI_GMAC_PCLK>,
743                          <&topckgen CLK_TOP_ETHER_125M_SEL>,
744                          <&topckgen CLK_TOP_ETHER_50M_SEL>,
745                          <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
746                 assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>,
747                                   <&topckgen CLK_TOP_ETHER_50M_SEL>,
748                                   <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
749                 assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>,
750                                          <&topckgen CLK_TOP_APLL1_D3>,
751                                          <&topckgen CLK_TOP_ETHERPLL_50M>;
752                 power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>;
753                 mediatek,pericfg = <&pericfg>;
754                 snps,axi-config = <&stmmac_axi_setup>;
755                 snps,mtl-rx-config = <&mtl_rx_setup>;
756                 snps,mtl-tx-config = <&mtl_tx_setup>;
757                 snps,txpbl = <1>;
758                 snps,rxpbl = <1>;
759                 snps,clk-csr = <0>;
760                 status = "disabled";
761         };
762 
763         mmc0: mmc@11230000 {
764                 compatible = "mediatek,mt2712-mmc";
765                 reg = <0 0x11230000 0 0x1000>;
766                 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
767                 clocks = <&pericfg CLK_PERI_MSDC30_0>,
768                          <&pericfg CLK_PERI_MSDC50_0_HCLK_EN>,
769                          <&pericfg CLK_PERI_MSDC50_0_EN>,
770                          <&pericfg CLK_PERI_MSDC30_0_QTR_EN>;
771                 clock-names = "source", "hclk", "source_cg", "bus_clk";
772                 status = "disabled";
773         };
774 
775         mmc1: mmc@11240000 {
776                 compatible = "mediatek,mt2712-mmc";
777                 reg = <0 0x11240000 0 0x1000>;
778                 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
779                 clocks = <&pericfg CLK_PERI_MSDC30_1>,
780                          <&topckgen CLK_TOP_AXI_SEL>,
781                          <&pericfg CLK_PERI_MSDC30_1_EN>;
782                 clock-names = "source", "hclk", "source_cg";
783                 status = "disabled";
784         };
785 
786         mmc2: mmc@11250000 {
787                 compatible = "mediatek,mt2712-mmc";
788                 reg = <0 0x11250000 0 0x1000>;
789                 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
790                 clocks = <&pericfg CLK_PERI_MSDC30_2>,
791                          <&topckgen CLK_TOP_AXI_SEL>,
792                          <&pericfg CLK_PERI_MSDC30_2_EN>;
793                 clock-names = "source", "hclk", "source_cg";
794                 status = "disabled";
795         };
796 
797         ssusb: usb@11271000 {
798                 compatible = "mediatek,mt2712-mtu3", "mediatek,mtu3";
799                 reg = <0 0x11271000 0 0x3000>,
800                       <0 0x11280700 0 0x0100>;
801                 reg-names = "mac", "ippc";
802                 interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_LOW>;
803                 phys = <&u2port0 PHY_TYPE_USB2>,
804                        <&u2port1 PHY_TYPE_USB2>;
805                 power-domains = <&scpsys MT2712_POWER_DOMAIN_USB>;
806                 clocks = <&topckgen CLK_TOP_USB30_SEL>;
807                 clock-names = "sys_ck";
808                 mediatek,syscon-wakeup = <&pericfg 0x510 2>;
809                 #address-cells = <2>;
810                 #size-cells = <2>;
811                 ranges;
812                 status = "disabled";
813 
814                 usb_host0: usb@11270000 {
815                         compatible = "mediatek,mt2712-xhci",
816                                      "mediatek,mtk-xhci";
817                         reg = <0 0x11270000 0 0x1000>;
818                         reg-names = "mac";
819                         interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_LOW>;
820                         power-domains = <&scpsys MT2712_POWER_DOMAIN_USB>;
821                         clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
822                         clock-names = "sys_ck", "ref_ck";
823                         status = "disabled";
824                 };
825         };
826 
827         u3phy0: t-phy@11290000 {
828                 compatible = "mediatek,mt2712-tphy",
829                              "mediatek,generic-tphy-v2";
830                 #address-cells = <1>;
831                 #size-cells = <1>;
832                 ranges = <0 0 0x11290000 0x9000>;
833                 status = "okay";
834 
835                 u2port0: usb-phy@0 {
836                         reg = <0x0 0x700>;
837                         clocks = <&clk26m>;
838                         clock-names = "ref";
839                         #phy-cells = <1>;
840                         status = "okay";
841                 };
842 
843                 u2port1: usb-phy@8000 {
844                         reg = <0x8000 0x700>;
845                         clocks = <&clk26m>;
846                         clock-names = "ref";
847                         #phy-cells = <1>;
848                         status = "okay";
849                 };
850 
851                 u3port0: usb-phy@8700 {
852                         reg = <0x8700 0x900>;
853                         clocks = <&clk26m>;
854                         clock-names = "ref";
855                         #phy-cells = <1>;
856                         status = "okay";
857                 };
858         };
859 
860         ssusb1: usb@112c1000 {
861                 compatible = "mediatek,mt2712-mtu3", "mediatek,mtu3";
862                 reg = <0 0x112c1000 0 0x3000>,
863                       <0 0x112d0700 0 0x0100>;
864                 reg-names = "mac", "ippc";
865                 interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_LOW>;
866                 phys = <&u2port2 PHY_TYPE_USB2>,
867                        <&u2port3 PHY_TYPE_USB2>,
868                        <&u3port1 PHY_TYPE_USB3>;
869                 power-domains = <&scpsys MT2712_POWER_DOMAIN_USB2>;
870                 clocks = <&topckgen CLK_TOP_USB30_SEL>;
871                 clock-names = "sys_ck";
872                 mediatek,syscon-wakeup = <&pericfg 0x514 2>;
873                 #address-cells = <2>;
874                 #size-cells = <2>;
875                 ranges;
876                 status = "disabled";
877 
878                 usb_host1: usb@112c0000 {
879                         compatible = "mediatek,mt2712-xhci",
880                                      "mediatek,mtk-xhci";
881                         reg = <0 0x112c0000 0 0x1000>;
882                         reg-names = "mac";
883                         interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_LOW>;
884                         power-domains = <&scpsys MT2712_POWER_DOMAIN_USB2>;
885                         clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
886                         clock-names = "sys_ck", "ref_ck";
887                         status = "disabled";
888                 };
889         };
890 
891         u3phy1: t-phy@112e0000 {
892                 compatible = "mediatek,mt2712-tphy",
893                              "mediatek,generic-tphy-v2";
894                 #address-cells = <1>;
895                 #size-cells = <1>;
896                 ranges = <0 0 0x112e0000 0x9000>;
897                 status = "okay";
898 
899                 u2port2: usb-phy@0 {
900                         reg = <0x0 0x700>;
901                         clocks = <&clk26m>;
902                         clock-names = "ref";
903                         #phy-cells = <1>;
904                         status = "okay";
905                 };
906 
907                 u2port3: usb-phy@8000 {
908                         reg = <0x8000 0x700>;
909                         clocks = <&clk26m>;
910                         clock-names = "ref";
911                         #phy-cells = <1>;
912                         status = "okay";
913                 };
914 
915                 u3port1: usb-phy@8700 {
916                         reg = <0x8700 0x900>;
917                         clocks = <&clk26m>;
918                         clock-names = "ref";
919                         #phy-cells = <1>;
920                         status = "okay";
921                 };
922         };
923 
924         pcie1: pcie@112ff000 {
925                 compatible = "mediatek,mt2712-pcie";
926                 device_type = "pci";
927                 reg = <0 0x112ff000 0 0x1000>;
928                 reg-names = "port1";
929                 linux,pci-domain = <1>;
930                 #address-cells = <3>;
931                 #size-cells = <2>;
932                 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
933                 interrupt-names = "pcie_irq";
934                 clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
935                          <&pericfg CLK_PERI_PCIE1>;
936                 clock-names = "sys_ck1", "ahb_ck1";
937                 phys = <&u3port1 PHY_TYPE_PCIE>;
938                 phy-names = "pcie-phy1";
939                 bus-range = <0x00 0xff>;
940                 ranges = <0x82000000 0 0x11400000  0x0 0x11400000  0 0x300000>;
941                 status = "disabled";
942 
943                 #interrupt-cells = <1>;
944                 interrupt-map-mask = <0 0 0 7>;
945                 interrupt-map = <0 0 0 1 &pcie_intc1 0>,
946                                 <0 0 0 2 &pcie_intc1 1>,
947                                 <0 0 0 3 &pcie_intc1 2>,
948                                 <0 0 0 4 &pcie_intc1 3>;
949                 pcie_intc1: interrupt-controller {
950                         interrupt-controller;
951                         #address-cells = <0>;
952                         #interrupt-cells = <1>;
953                 };
954         };
955 
956         pcie0: pcie@11700000 {
957                 compatible = "mediatek,mt2712-pcie";
958                 device_type = "pci";
959                 reg = <0 0x11700000 0 0x1000>;
960                 reg-names = "port0";
961                 linux,pci-domain = <0>;
962                 #address-cells = <3>;
963                 #size-cells = <2>;
964                 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
965                 interrupt-names = "pcie_irq";
966                 clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
967                          <&pericfg CLK_PERI_PCIE0>;
968                 clock-names = "sys_ck0", "ahb_ck0";
969                 phys = <&u3port0 PHY_TYPE_PCIE>;
970                 phy-names = "pcie-phy0";
971                 bus-range = <0x00 0xff>;
972                 ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
973                 status = "disabled";
974 
975                 #interrupt-cells = <1>;
976                 interrupt-map-mask = <0 0 0 7>;
977                 interrupt-map = <0 0 0 1 &pcie_intc0 0>,
978                                 <0 0 0 2 &pcie_intc0 1>,
979                                 <0 0 0 3 &pcie_intc0 2>,
980                                 <0 0 0 4 &pcie_intc0 3>;
981                 pcie_intc0: interrupt-controller {
982                         interrupt-controller;
983                         #address-cells = <0>;
984                         #interrupt-cells = <1>;
985                 };
986         };
987 
988         mfgcfg: syscon@13000000 {
989                 compatible = "mediatek,mt2712-mfgcfg", "syscon";
990                 reg = <0 0x13000000 0 0x1000>;
991                 #clock-cells = <1>;
992         };
993 
994         mmsys: syscon@14000000 {
995                 compatible = "mediatek,mt2712-mmsys", "syscon";
996                 reg = <0 0x14000000 0 0x1000>;
997                 #clock-cells = <1>;
998         };
999 
1000         larb0: larb@14021000 {
1001                 compatible = "mediatek,mt2712-smi-larb";
1002                 reg = <0 0x14021000 0 0x1000>;
1003                 mediatek,smi = <&smi_common0>;
1004                 mediatek,larb-id = <0>;
1005                 power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>;
1006                 clocks = <&mmsys CLK_MM_SMI_LARB0>,
1007                          <&mmsys CLK_MM_SMI_LARB0>;
1008                 clock-names = "apb", "smi";
1009         };
1010 
1011         smi_common0: smi@14022000 {
1012                 compatible = "mediatek,mt2712-smi-common";
1013                 reg = <0 0x14022000 0 0x1000>;
1014                 power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>;
1015                 clocks = <&mmsys CLK_MM_SMI_COMMON>,
1016                          <&mmsys CLK_MM_SMI_COMMON>;
1017                 clock-names = "apb", "smi";
1018         };
1019 
1020         larb4: larb@14027000 {
1021                 compatible = "mediatek,mt2712-smi-larb";
1022                 reg = <0 0x14027000 0 0x1000>;
1023                 mediatek,smi = <&smi_common1>;
1024                 mediatek,larb-id = <4>;
1025                 power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>;
1026                 clocks = <&mmsys CLK_MM_SMI_LARB4>,
1027                          <&mmsys CLK_MM_SMI_LARB4>;
1028                 clock-names = "apb", "smi";
1029         };
1030 
1031         larb5: larb@14030000 {
1032                 compatible = "mediatek,mt2712-smi-larb";
1033                 reg = <0 0x14030000 0 0x1000>;
1034                 mediatek,smi = <&smi_common1>;
1035                 mediatek,larb-id = <5>;
1036                 power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>;
1037                 clocks = <&mmsys CLK_MM_SMI_LARB5>,
1038                          <&mmsys CLK_MM_SMI_LARB5>;
1039                 clock-names = "apb", "smi";
1040         };
1041 
1042         smi_common1: smi@14031000 {
1043                 compatible = "mediatek,mt2712-smi-common";
1044                 reg = <0 0x14031000 0 0x1000>;
1045                 power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>;
1046                 clocks = <&mmsys CLK_MM_SMI_COMMON1>,
1047                          <&mmsys CLK_MM_SMI_COMMON1>;
1048                 clock-names = "apb", "smi";
1049         };
1050 
1051         larb7: larb@14032000 {
1052                 compatible = "mediatek,mt2712-smi-larb";
1053                 reg = <0 0x14032000 0 0x1000>;
1054                 mediatek,smi = <&smi_common1>;
1055                 mediatek,larb-id = <7>;
1056                 power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>;
1057                 clocks = <&mmsys CLK_MM_SMI_LARB7>,
1058                          <&mmsys CLK_MM_SMI_LARB7>;
1059                 clock-names = "apb", "smi";
1060         };
1061 
1062         imgsys: syscon@15000000 {
1063                 compatible = "mediatek,mt2712-imgsys", "syscon";
1064                 reg = <0 0x15000000 0 0x1000>;
1065                 #clock-cells = <1>;
1066         };
1067 
1068         larb2: larb@15001000 {
1069                 compatible = "mediatek,mt2712-smi-larb";
1070                 reg = <0 0x15001000 0 0x1000>;
1071                 mediatek,smi = <&smi_common0>;
1072                 mediatek,larb-id = <2>;
1073                 power-domains = <&scpsys MT2712_POWER_DOMAIN_ISP>;
1074                 clocks = <&imgsys CLK_IMG_SMI_LARB2>,
1075                          <&imgsys CLK_IMG_SMI_LARB2>;
1076                 clock-names = "apb", "smi";
1077         };
1078 
1079         bdpsys: syscon@15010000 {
1080                 compatible = "mediatek,mt2712-bdpsys", "syscon";
1081                 reg = <0 0x15010000 0 0x1000>;
1082                 #clock-cells = <1>;
1083         };
1084 
1085         vdecsys: syscon@16000000 {
1086                 compatible = "mediatek,mt2712-vdecsys", "syscon";
1087                 reg = <0 0x16000000 0 0x1000>;
1088                 #clock-cells = <1>;
1089         };
1090 
1091         larb1: larb@16010000 {
1092                 compatible = "mediatek,mt2712-smi-larb";
1093                 reg = <0 0x16010000 0 0x1000>;
1094                 mediatek,smi = <&smi_common0>;
1095                 mediatek,larb-id = <1>;
1096                 power-domains = <&scpsys MT2712_POWER_DOMAIN_VDEC>;
1097                 clocks = <&vdecsys CLK_VDEC_CKEN>,
1098                          <&vdecsys CLK_VDEC_LARB1_CKEN>;
1099                 clock-names = "apb", "smi";
1100         };
1101 
1102         vencsys: syscon@18000000 {
1103                 compatible = "mediatek,mt2712-vencsys", "syscon";
1104                 reg = <0 0x18000000 0 0x1000>;
1105                 #clock-cells = <1>;
1106         };
1107 
1108         larb3: larb@18001000 {
1109                 compatible = "mediatek,mt2712-smi-larb";
1110                 reg = <0 0x18001000 0 0x1000>;
1111                 mediatek,smi = <&smi_common0>;
1112                 mediatek,larb-id = <3>;
1113                 power-domains = <&scpsys MT2712_POWER_DOMAIN_VENC>;
1114                 clocks = <&vencsys CLK_VENC_SMI_COMMON_CON>,
1115                          <&vencsys CLK_VENC_VENC>;
1116                 clock-names = "apb", "smi";
1117         };
1118 
1119         larb6: larb@18002000 {
1120                 compatible = "mediatek,mt2712-smi-larb";
1121                 reg = <0 0x18002000 0 0x1000>;
1122                 mediatek,smi = <&smi_common0>;
1123                 mediatek,larb-id = <6>;
1124                 power-domains = <&scpsys MT2712_POWER_DOMAIN_VENC>;
1125                 clocks = <&vencsys CLK_VENC_SMI_COMMON_CON>,
1126                          <&vencsys CLK_VENC_VENC>;
1127                 clock-names = "apb", "smi";
1128         };
1129 
1130         jpgdecsys: syscon@19000000 {
1131                 compatible = "mediatek,mt2712-jpgdecsys", "syscon";
1132                 reg = <0 0x19000000 0 0x1000>;
1133                 #clock-cells = <1>;
1134         };
1135 };
1136 

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php