1 // SPDX-License-Identifier: GPL-2.0-only
2
3 /dts-v1/;
4
5 #include "msm8916-pm8916.dtsi"
6 #include "msm8916-modem-qdsp6.dtsi"
7
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/leds/common.h>
11
12 / {
13 model = "Alcatel OneTouch Idol 3 (4.7)";
14 compatible = "alcatel,idol347", "qcom,msm8916";
15 chassis-type = "handset";
16
17 aliases {
18 mmc0 = &sdhc_1; /* eMMC */
19 mmc1 = &sdhc_2; /* SD card */
20 serial0 = &blsp_uart2;
21 };
22
23 chosen {
24 stdout-path = "serial0";
25 };
26
27 reserved-memory {
28 /delete-node/ reserved@86680000;
29 /delete-node/ rmtfs@86700000;
30
31 rmtfs: rmtfs@86680000 {
32 compatible = "qcom,rmtfs-mem";
33 reg = <0x0 0x86680000 0x0 0x160000>;
34 no-map;
35
36 qcom,client-id = <1>;
37 };
38 };
39
40 gpio-keys {
41 compatible = "gpio-keys";
42
43 pinctrl-names = "default";
44 pinctrl-0 = <&gpio_keys_default>;
45
46 label = "GPIO Buttons";
47
48 button-volume-up {
49 label = "Volume Up";
50 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
51 linux,code = <KEY_VOLUMEUP>;
52 };
53 };
54
55 gpio-leds {
56 compatible = "gpio-leds";
57
58 pinctrl-names = "default";
59 pinctrl-0 = <&gpio_leds_default>;
60
61 led-0 {
62 gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
63 linux,default-trigger = "torch";
64 function = LED_FUNCTION_TORCH;
65 };
66 };
67
68 reg_headphones_avdd: regulator-headphones-avdd {
69 compatible = "regulator-fixed";
70 regulator-name = "headphones_avdd";
71 regulator-min-microvolt = <1800000>;
72 regulator-max-microvolt = <1800000>;
73 gpio = <&tlmm 121 GPIO_ACTIVE_HIGH>;
74 enable-active-high;
75 pinctrl-0 = <&headphones_avdd_default>;
76 pinctrl-names = "default";
77 };
78
79 usb_id: usb-id {
80 compatible = "linux,extcon-usb-gpio";
81 id-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
82 pinctrl-names = "default";
83 pinctrl-0 = <&usb_id_default>;
84 };
85 };
86
87 &blsp_i2c3 {
88 status = "okay";
89
90 headphones: audio-codec@10 {
91 compatible = "asahi-kasei,ak4375";
92 reg = <0x10>;
93 avdd-supply = <®_headphones_avdd>;
94 tvdd-supply = <&pm8916_l6>;
95 pdn-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>;
96 pinctrl-0 = <&headphones_pdn_default>;
97 pinctrl-names = "default";
98 #sound-dai-cells = <0>;
99 };
100
101 speaker_codec_top: audio-codec@34 {
102 compatible = "nxp,tfa9897";
103 reg = <0x34>;
104 vddd-supply = <&pm8916_l6>;
105 rcv-gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
106 pinctrl-0 = <&speaker_top_default>;
107 pinctrl-names = "default";
108 sound-name-prefix = "Speaker Top";
109 #sound-dai-cells = <0>;
110 };
111
112 speaker_codec_bottom: audio-codec@36 {
113 compatible = "nxp,tfa9897";
114 reg = <0x36>;
115 vddd-supply = <&pm8916_l6>;
116 rcv-gpios = <&tlmm 111 GPIO_ACTIVE_HIGH>;
117 pinctrl-0 = <&speaker_bottom_default>;
118 pinctrl-names = "default";
119 sound-name-prefix = "Speaker Bottom";
120 #sound-dai-cells = <0>;
121 };
122 };
123
124 &blsp_i2c4 {
125 status = "okay";
126
127 touchscreen@26 {
128 compatible = "mstar,msg2638";
129 reg = <0x26>;
130 interrupt-parent = <&tlmm>;
131 interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
132 reset-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>;
133 pinctrl-names = "default";
134 pinctrl-0 = <&ts_int_reset_default>;
135 vdd-supply = <&pm8916_l17>;
136 vddio-supply = <&pm8916_l5>;
137 touchscreen-size-x = <2048>;
138 touchscreen-size-y = <2048>;
139 };
140 };
141
142 &blsp_i2c5 {
143 status = "okay";
144
145 magnetometer@c {
146 compatible = "asahi-kasei,ak09911";
147 reg = <0x0c>;
148 vdd-supply = <&pm8916_l17>;
149 vid-supply = <&pm8916_l6>;
150 reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
151 pinctrl-names = "default";
152 pinctrl-0 = <&mag_reset_default>;
153 mount-matrix = "0", "1", "0",
154 "-1", "0", "0",
155 "0", "0", "1";
156 };
157
158 accelerometer@f {
159 compatible = "kionix,kxtj21009";
160 reg = <0x0f>;
161 vdd-supply = <&pm8916_l17>;
162 vddio-supply = <&pm8916_l6>;
163 interrupt-parent = <&tlmm>;
164 interrupts = <31 IRQ_TYPE_EDGE_RISING>;
165 pinctrl-names = "default";
166 pinctrl-0 = <&accel_int_default>;
167 mount-matrix = "-1", "0", "0",
168 "0", "1", "0",
169 "0", "0", "-1";
170 };
171
172 proximity@48 {
173 compatible = "sensortek,stk3310";
174 reg = <0x48>;
175 interrupt-parent = <&tlmm>;
176 interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
177 pinctrl-names = "default";
178 pinctrl-0 = <&proximity_int_default>;
179 };
180
181 gyroscope@68 {
182 compatible = "bosch,bmg160";
183 reg = <0x68>;
184 vdd-supply = <&pm8916_l17>;
185 vddio-supply = <&pm8916_l6>;
186 interrupt-parent = <&tlmm>;
187 interrupts = <97 IRQ_TYPE_EDGE_RISING>,
188 <98 IRQ_TYPE_EDGE_RISING>;
189 pinctrl-names = "default";
190 pinctrl-0 = <&gyro_int_default>;
191 };
192 };
193
194 &blsp_i2c6 {
195 status = "okay";
196
197 led-controller@68 {
198 compatible = "si-en,sn3190";
199 reg = <0x68>;
200 shutdown-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>;
201 pinctrl-names = "default";
202 pinctrl-0 = <&led_enable_default &led_shutdown_default>;
203 #address-cells = <1>;
204 #size-cells = <0>;
205
206 led@1 {
207 reg = <1>;
208 led-max-microamp = <5000>;
209 function = LED_FUNCTION_INDICATOR;
210 color = <LED_COLOR_ID_WHITE>;
211 };
212 };
213 };
214
215 &blsp_uart2 {
216 status = "okay";
217 };
218
219 &mpss_mem {
220 reg = <0x0 0x86800000 0x0 0x5000000>;
221 };
222
223 &pm8916_codec {
224 qcom,micbias1-ext-cap;
225 qcom,micbias-lvl = <2800>;
226 qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
227 qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
228 qcom,hphl-jack-type-normally-open;
229 };
230
231 &pm8916_resin {
232 status = "okay";
233 linux,code = <KEY_VOLUMEDOWN>;
234 };
235
236 &pm8916_rpm_regulators {
237 pm8916_l17: l17 {
238 regulator-min-microvolt = <2850000>;
239 regulator-max-microvolt = <2850000>;
240 };
241 };
242
243 &pm8916_vib {
244 status = "okay";
245 };
246
247 &q6afedai {
248 dai@18 {
249 reg = <SECONDARY_MI2S_RX>;
250 qcom,sd-lines = <0>;
251 };
252 dai@22 {
253 reg = <QUATERNARY_MI2S_RX>;
254 qcom,sd-lines = <0>;
255 };
256 };
257
258 &sdhc_1 {
259 status = "okay";
260 };
261
262 &sdhc_2 {
263 status = "okay";
264
265 pinctrl-names = "default", "sleep";
266 pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
267 pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
268
269 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
270 };
271
272 &sound {
273 /* Add pin switches for speakers to allow disabling them individually */
274 model = "alcatel-idol3";
275 widgets =
276 "Speaker", "Speaker Top",
277 "Speaker", "Speaker Bottom";
278 pin-switches = "Speaker Top", "Speaker Bottom";
279 audio-routing =
280 "Speaker Top", "Speaker Top OUT",
281 "Speaker Bottom", "Speaker Bottom OUT",
282 "AMIC1", "MIC BIAS External1",
283 "AMIC2", "MIC BIAS Internal2",
284 "AMIC3", "MIC BIAS External1";
285
286 pinctrl-0 = <&cdc_pdm_default &pri_mi2s_default &pri_mi2s_ws_default &sec_mi2s_default>;
287 pinctrl-1 = <&cdc_pdm_sleep &pri_mi2s_sleep &pri_mi2s_ws_sleep &sec_mi2s_sleep>;
288 pinctrl-names = "default", "sleep";
289
290 sound_link_backend2: backend2-dai-link {
291 link-name = "Quaternary MI2S";
292
293 cpu {
294 sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
295 };
296 platform {
297 sound-dai = <&q6routing>;
298 };
299 codec {
300 sound-dai = <&speaker_codec_top>, <&speaker_codec_bottom>;
301 };
302 };
303 };
304
305 &sound_link_backend0 {
306 /* Primary MI2S is not used, replace with Secondary MI2S for headphones */
307 link-name = "Secondary MI2S";
308
309 cpu {
310 sound-dai = <&q6afedai SECONDARY_MI2S_RX>;
311 };
312 platform {
313 sound-dai = <&q6routing>;
314 };
315 codec {
316 sound-dai = <&headphones>;
317 };
318 };
319
320 &usb {
321 status = "okay";
322 extcon = <&usb_id>, <&usb_id>;
323 };
324
325 &usb_hs_phy {
326 extcon = <&usb_id>;
327 };
328
329 &venus {
330 status = "okay";
331 };
332
333 &venus_mem {
334 status = "okay";
335 };
336
337 &wcnss {
338 status = "okay";
339 };
340
341 &wcnss_iris {
342 compatible = "qcom,wcn3620";
343 };
344
345 &wcnss_mem {
346 status = "okay";
347 };
348
349 /* Only some of the pins are used */
350 &pri_mi2s_default {
351 pins = "gpio113", "gpio115";
352 };
353
354 &pri_mi2s_sleep {
355 pins = "gpio113", "gpio115";
356 };
357
358 &tlmm {
359 accel_int_default: accel-int-default-state {
360 pins = "gpio31";
361 function = "gpio";
362
363 drive-strength = <2>;
364 bias-disable;
365 };
366
367 gpio_keys_default: gpio-keys-default-state {
368 pins = "gpio107";
369 function = "gpio";
370
371 drive-strength = <2>;
372 bias-pull-up;
373 };
374
375 gpio_leds_default: gpio-leds-default-state {
376 pins = "gpio32";
377 function = "gpio";
378
379 drive-strength = <2>;
380 bias-disable;
381 };
382
383 gyro_int_default: gyro-int-default-state {
384 pins = "gpio97", "gpio98";
385 function = "gpio";
386
387 drive-strength = <2>;
388 bias-disable;
389 };
390
391 headphones_avdd_default: headphones-avdd-default-state {
392 pins = "gpio121";
393 function = "gpio";
394 drive-strength = <2>;
395 bias-disable;
396 };
397
398 headphones_pdn_default: headphones-pdn-default-state {
399 pins = "gpio114";
400 function = "gpio";
401 drive-strength = <2>;
402 bias-disable;
403 };
404
405 /*
406 * The OEM wired an additional GPIO to be asserted so that
407 * the si-en,sn3190 LED IC works. Since this GPIO is not
408 * part of the IC datasheet nor supported by the driver,
409 * force it asserted here.
410 */
411 led_enable_default: led-enable-default-state {
412 pins = "gpio102";
413 function = "gpio";
414
415 drive-strength = <2>;
416 bias-disable;
417 output-high;
418 };
419
420 led_shutdown_default: led-shutdown-default-state {
421 pins = "gpio89";
422 function = "gpio";
423
424 drive-strength = <2>;
425 bias-disable;
426 };
427
428 mag_reset_default: mag-reset-default-state {
429 pins = "gpio8";
430 function = "gpio";
431
432 drive-strength = <2>;
433 bias-disable;
434 };
435
436 proximity_int_default: proximity-int-default-state {
437 pins = "gpio12";
438 function = "gpio";
439
440 drive-strength = <6>;
441 bias-pull-up;
442 };
443
444 sdc2_cd_default: sdc2-cd-default-state {
445 pins = "gpio38";
446 function = "gpio";
447 drive-strength = <2>;
448 bias-disable;
449 };
450
451 speaker_bottom_default: speaker-bottom-default-state {
452 pins = "gpio111";
453 function = "gpio";
454 drive-strength = <2>;
455 bias-disable;
456 };
457
458 speaker_top_default: speaker-top-default-state {
459 pins = "gpio50";
460 function = "gpio";
461 drive-strength = <2>;
462 bias-disable;
463 };
464
465 ts_int_reset_default: ts-int-reset-default-state {
466 pins = "gpio13", "gpio100";
467 function = "gpio";
468
469 drive-strength = <2>;
470 bias-disable;
471 };
472
473 usb_id_default: usb-id-default-state {
474 pins = "gpio69";
475 function = "gpio";
476
477 drive-strength = <8>;
478 bias-pull-up;
479 };
480 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.