1 // SPDX-License-Identifier: GPL-2.0-only
2
3 /dts-v1/;
4
5 #include "msm8916-pm8916.dtsi"
6 #include "msm8916-modem-qdsp6.dtsi"
7
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
12
13 / {
14 model = "BQ Aquaris X5 (Longcheer L8910)";
15 compatible = "longcheer,l8910", "qcom,msm8916";
16 chassis-type = "handset";
17
18 aliases {
19 mmc0 = &sdhc_1; /* eMMC */
20 mmc1 = &sdhc_2; /* SD card */
21 serial0 = &blsp_uart2;
22 };
23
24 chosen {
25 stdout-path = "serial0";
26 };
27
28 speaker_amp: audio-amplifier {
29 compatible = "awinic,aw8738";
30 mode-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>;
31 awinic,mode = <5>;
32 sound-name-prefix = "Speaker Amp";
33
34 pinctrl-0 = <&spk_ext_pa_default>;
35 pinctrl-names = "default";
36 };
37
38 flash-led-controller {
39 compatible = "ocs,ocp8110";
40 enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
41 flash-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>;
42
43 pinctrl-0 = <&camera_front_flash_default>;
44 pinctrl-names = "default";
45
46 flash_led: led {
47 function = LED_FUNCTION_FLASH;
48 color = <LED_COLOR_ID_WHITE>;
49 flash-max-timeout-us = <250000>;
50 };
51 };
52
53 gpio-keys {
54 compatible = "gpio-keys";
55
56 pinctrl-names = "default";
57 pinctrl-0 = <&gpio_keys_default>;
58
59 label = "GPIO Buttons";
60
61 button-volume-up {
62 label = "Volume Up";
63 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
64 linux,code = <KEY_VOLUMEUP>;
65 };
66 };
67
68 leds {
69 compatible = "gpio-leds";
70
71 led-0 {
72 gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
73 color = <LED_COLOR_ID_WHITE>;
74 default-state = "off";
75 function = LED_FUNCTION_KBD_BACKLIGHT;
76
77 pinctrl-names = "default";
78 pinctrl-0 = <&button_backlight_default>;
79 };
80 };
81
82 usb_id: usb-id {
83 compatible = "linux,extcon-usb-gpio";
84 id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
85 pinctrl-names = "default";
86 pinctrl-0 = <&usb_id_default>;
87 };
88 };
89
90 &blsp_i2c2 {
91 status = "okay";
92
93 led-controller@30 {
94 compatible = "kinetic,ktd2026";
95 reg = <0x30>;
96 #address-cells = <1>;
97 #size-cells = <0>;
98
99 vin-supply = <&pm8916_l17>;
100 vio-supply = <&pm8916_l6>;
101
102 pinctrl-0 = <&status_led_default>;
103 pinctrl-names = "default";
104
105 multi-led {
106 color = <LED_COLOR_ID_RGB>;
107 function = LED_FUNCTION_STATUS;
108
109 #address-cells = <1>;
110 #size-cells = <0>;
111
112 led@0 {
113 reg = <0>;
114 color = <LED_COLOR_ID_RED>;
115 };
116
117 led@1 {
118 reg = <1>;
119 color = <LED_COLOR_ID_GREEN>;
120 };
121
122 led@2 {
123 reg = <2>;
124 color = <LED_COLOR_ID_BLUE>;
125 };
126 };
127 };
128
129 flash-led-controller@53 {
130 compatible = "silergy,sy7802";
131 reg = <0x53>;
132
133 enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
134
135 pinctrl-0 = <&camera_rear_flash_default>;
136 pinctrl-names = "default";
137
138 #address-cells = <1>;
139 #size-cells = <0>;
140
141 led@0 {
142 reg = <0>;
143 function = LED_FUNCTION_FLASH;
144 color = <LED_COLOR_ID_WHITE>;
145 led-sources = <0>, <1>;
146 };
147 };
148 };
149
150 &blsp_i2c3 {
151 status = "okay";
152
153 magnetometer@d {
154 compatible = "asahi-kasei,ak09911";
155 reg = <0x0d>;
156
157 vdd-supply = <&pm8916_l17>;
158 vid-supply = <&pm8916_l6>;
159
160 reset-gpios = <&tlmm 111 GPIO_ACTIVE_LOW>;
161
162 pinctrl-names = "default";
163 pinctrl-0 = <&mag_reset_default>;
164 };
165
166 imu@68 {
167 compatible = "bosch,bmi160";
168 reg = <0x68>;
169
170 vdd-supply = <&pm8916_l17>;
171 vddio-supply = <&pm8916_l6>;
172
173 mount-matrix = "0", "1", "0",
174 "-1", "0", "0",
175 "0", "0", "1";
176 };
177 };
178
179 &blsp_uart2 {
180 status = "okay";
181 };
182
183 &mpss_mem {
184 reg = <0x0 0x86800000 0x0 0x5000000>;
185 };
186
187 &pm8916_codec {
188 qcom,micbias-lvl = <2800>;
189 qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
190 qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
191 qcom,hphl-jack-type-normally-open;
192 };
193
194 &pm8916_gpios {
195 status_led_default: status-led-default-state {
196 pins = "gpio3";
197 function = PMIC_GPIO_FUNC_NORMAL;
198 power-source = <PM8916_GPIO_VPH>;
199 bias-disable;
200 output-high;
201 };
202 };
203
204 &pm8916_resin {
205 status = "okay";
206 linux,code = <KEY_VOLUMEDOWN>;
207 };
208
209 &pm8916_rpm_regulators {
210 pm8916_l17: l17 {
211 regulator-min-microvolt = <2850000>;
212 regulator-max-microvolt = <2850000>;
213 };
214 };
215
216 &pm8916_vib {
217 status = "okay";
218 };
219
220 &sdhc_1 {
221 status = "okay";
222 };
223
224 &sdhc_2 {
225 status = "okay";
226
227 pinctrl-names = "default", "sleep";
228 pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
229 pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
230
231 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
232 };
233
234 &sound {
235 /*
236 * Provide widgets/pin-switches to allow enabling speaker separately.
237 * The hardware does not provide a way to disable the output via the
238 * headphone jack when the speaker is enabled.
239 */
240 model = "bq-paella";
241 widgets =
242 "Speaker", "Speaker",
243 "Headphone", "Headphones";
244 pin-switches = "Speaker";
245 audio-routing =
246 "Speaker", "Speaker Amp OUT",
247 "Speaker Amp IN", "HPH_R",
248 "Headphones", "HPH_L",
249 "Headphones", "HPH_R",
250 "AMIC1", "MIC BIAS External1",
251 "AMIC2", "MIC BIAS Internal2",
252 "AMIC3", "MIC BIAS External1";
253 aux-devs = <&speaker_amp>;
254 };
255
256 &usb {
257 status = "okay";
258 extcon = <&usb_id>, <&usb_id>;
259 };
260
261 &usb_hs_phy {
262 extcon = <&usb_id>;
263 };
264
265 &venus {
266 status = "okay";
267 };
268
269 &venus_mem {
270 status = "okay";
271 };
272
273 &wcnss {
274 status = "okay";
275 };
276
277 &wcnss_iris {
278 compatible = "qcom,wcn3620";
279 };
280
281 &wcnss_mem {
282 status = "okay";
283 };
284
285 &tlmm {
286 button_backlight_default: button-backlight-default-state {
287 pins = "gpio17";
288 function = "gpio";
289
290 drive-strength = <2>;
291 bias-disable;
292 };
293
294 camera_front_flash_default: camera-front-flash-default-state {
295 pins = "gpio49", "gpio119";
296 function = "gpio";
297 drive-strength = <2>;
298 bias-disable;
299 };
300
301 camera_rear_flash_default: camera-rear-flash-default-state {
302 pins = "gpio9", "gpio16", "gpio117";
303 function = "gpio";
304 drive-strength = <2>;
305 bias-disable;
306 };
307
308 gpio_keys_default: gpio-keys-default-state {
309 pins = "gpio107";
310 function = "gpio";
311
312 drive-strength = <2>;
313 bias-pull-up;
314 };
315
316 mag_reset_default: mag-reset-default-state {
317 pins = "gpio111";
318 function = "gpio";
319
320 drive-strength = <2>;
321 bias-disable;
322 };
323
324 sdc2_cd_default: sdc2-cd-default-state {
325 pins = "gpio38";
326 function = "gpio";
327 drive-strength = <2>;
328 bias-disable;
329 };
330
331 spk_ext_pa_default: spk-ext-pa-default-state {
332 pins = "gpio114";
333 function = "gpio";
334 drive-strength = <2>;
335 bias-disable;
336 };
337
338 usb_id_default: usb-id-default-state {
339 pins = "gpio110";
340 function = "gpio";
341
342 drive-strength = <8>;
343 bias-pull-up;
344 };
345 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.