1 // SPDX-License-Identifier: GPL-2.0-only
2
3 #include "msm8916-modem-qdsp6.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/leds/common.h>
7 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
8
9 / {
10 aliases {
11 mmc0 = &sdhc_1; /* eMMC */
12 mmc1 = &sdhc_2; /* SD card */
13 serial0 = &blsp_uart2;
14 };
15
16 chosen {
17 stdout-path = "serial0";
18 };
19
20 backlight: backlight {
21 compatible = "pwm-backlight";
22 pwms = <&pm8916_pwm 0 100000>;
23 brightness-levels = <0 255>;
24 num-interpolated-steps = <255>;
25 default-brightness-level = <128>;
26 };
27
28 flash-led-controller {
29 compatible = "sgmicro,sgm3140";
30 enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
31 flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
32
33 pinctrl-0 = <&camera_front_flash_default>;
34 pinctrl-names = "default";
35
36 flash_led: led {
37 function = LED_FUNCTION_FLASH;
38 color = <LED_COLOR_ID_WHITE>;
39 };
40 };
41
42 gpio-keys {
43 compatible = "gpio-keys";
44
45 pinctrl-0 = <&gpio_keys_default>;
46 pinctrl-names = "default";
47
48 label = "GPIO Buttons";
49
50 button-volume-up {
51 label = "Volume Up";
52 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
53 linux,code = <KEY_VOLUMEUP>;
54 };
55 };
56
57 gpio-leds {
58 compatible = "gpio-leds";
59
60 pinctrl-0 = <&gpio_leds_default>;
61 pinctrl-names = "default";
62
63 led-0 {
64 gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
65 function = LED_FUNCTION_CHARGING;
66 color = <LED_COLOR_ID_RED>;
67 default-state = "off";
68 retain-state-suspended;
69 };
70
71 led-1 {
72 gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
73 function = LED_FUNCTION_STATUS;
74 color = <LED_COLOR_ID_GREEN>;
75 default-state = "off";
76 retain-state-suspended;
77 };
78 };
79
80 usb_id: usb-id {
81 compatible = "linux,extcon-usb-gpio";
82 id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
83 pinctrl-0 = <&usb_id_default>;
84 pinctrl-names = "default";
85 };
86 };
87
88 &blsp_i2c2 {
89 status = "okay";
90
91 accelerometer@68 {
92 compatible = "invensense,icm20608";
93 reg = <0x68>;
94
95 interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_FALLING>;
96
97 pinctrl-0 = <&accelerometer_default>;
98 pinctrl-names = "default";
99
100 vdd-supply = <&pm8916_l17>;
101 vddio-supply = <&pm8916_l6>;
102
103 mount-matrix = "-1", "0", "0",
104 "0", "1", "0",
105 "0", "0", "1";
106 };
107 };
108
109 &blsp_i2c5 {
110 status = "okay";
111
112 touchscreen: touchscreen@38 {
113 compatible = "edt,edt-ft5306";
114 reg = <0x38>;
115
116 interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
117
118 pinctrl-0 = <&touchscreen_default>;
119 pinctrl-names = "default";
120
121 vcc-supply = <&pm8916_l17>;
122 iovcc-supply = <&pm8916_l6>;
123
124 reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
125 };
126 };
127
128 &blsp_uart2 {
129 status = "okay";
130 };
131
132 &mpss_mem {
133 reg = <0x0 0x86800000 0x0 0x5500000>;
134 };
135
136 &pm8916_pwm {
137 pinctrl-0 = <&pwm_out>;
138 pinctrl-names = "default";
139 status = "okay";
140 };
141
142 &pm8916_resin {
143 linux,code = <KEY_VOLUMEDOWN>;
144 status = "okay";
145 };
146
147 &pm8916_rpm_regulators {
148 pm8916_l17: l17 {
149 regulator-min-microvolt = <2850000>;
150 regulator-max-microvolt = <2850000>;
151 };
152 };
153
154 &pm8916_vib {
155 status = "okay";
156 };
157
158 &sdhc_1 {
159 status = "okay";
160 };
161
162 &sdhc_2 {
163 pinctrl-0 = <&sdc2_default>;
164 pinctrl-1 = <&sdc2_sleep>;
165 pinctrl-names = "default", "sleep";
166 non-removable;
167 status = "okay";
168 };
169
170 &usb {
171 extcon = <&usb_id>, <&usb_id>;
172 status = "okay";
173 };
174
175 &usb_hs_phy {
176 extcon = <&usb_id>;
177 };
178
179 &wcnss {
180 status = "okay";
181 };
182
183 &wcnss_iris {
184 compatible = "qcom,wcn3620";
185 };
186
187 &wcnss_mem {
188 status = "okay";
189 };
190
191 &tlmm {
192 accelerometer_default: accelerometer-default-state {
193 pins = "gpio115";
194 function = "gpio";
195 drive-strength = <6>;
196 bias-pull-up;
197 };
198
199 camera_front_flash_default: camera-front-flash-default-state {
200 pins = "gpio31", "gpio32";
201 function = "gpio";
202 drive-strength = <2>;
203 bias-disable;
204 };
205
206 gpio_keys_default: gpio-keys-default-state {
207 pins = "gpio107";
208 function = "gpio";
209 drive-strength = <2>;
210 bias-pull-up;
211 };
212
213 gpio_leds_default: gpio-leds-default-state {
214 pins = "gpio36", "gpio69";
215 function = "gpio";
216 drive-strength = <2>;
217 bias-disable;
218 };
219
220 touchscreen_default: touchscreen-default-state {
221 reset-pins {
222 pins = "gpio12";
223 function = "gpio";
224 drive-strength = <2>;
225 bias-disable;
226 };
227
228 touchscreen-pins {
229 pins = "gpio13";
230 function = "gpio";
231 drive-strength = <2>;
232 bias-pull-up;
233 };
234 };
235
236 usb_id_default: usb-id-default-state {
237 pins = "gpio110";
238 function = "gpio";
239 drive-strength = <8>;
240 bias-pull-up;
241 };
242 };
243
244 &pm8916_mpps {
245 pwm_out: mpp4-state {
246 pins = "mpp4";
247 function = "digital";
248 power-source = <PM8916_MPP_VPH>;
249 output-low;
250 qcom,dtest = <1>;
251 };
252 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.