1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2022, Sireesh Kodali
4 */
5 /dts-v1/;
6
7 #include "msm8953.dtsi"
8 #include "pm8953.dtsi"
9 #include "pmi8950.dtsi"
10
11 /delete-node/ &cont_splash_mem;
12 /delete-node/ &qseecom_mem;
13
14 / {
15 model = "Motorola G5 Plus";
16 compatible = "motorola,potter", "qcom,msm8953";
17 chassis-type = "handset";
18 qcom,msm-id = <293 0>;
19 qcom,board-id = <0x46 0x83a0>;
20
21 chosen {
22 #address-cells = <2>;
23 #size-cells = <2>;
24 ranges;
25
26 framebuffer@90001000 {
27 compatible = "simple-framebuffer";
28 reg = <0 0x90001000 0 (2220 * 1920 * 3)>;
29
30 width = <1080>;
31 height = <1920>;
32 stride = <(1080 * 3)>;
33 format = "r8g8b8";
34
35 power-domains = <&gcc MDSS_GDSC>;
36
37 clocks = <&gcc GCC_MDSS_AHB_CLK>,
38 <&gcc GCC_MDSS_AXI_CLK>,
39 <&gcc GCC_MDSS_VSYNC_CLK>,
40 <&gcc GCC_MDSS_MDP_CLK>,
41 <&gcc GCC_MDSS_BYTE0_CLK>,
42 <&gcc GCC_MDSS_PCLK0_CLK>,
43 <&gcc GCC_MDSS_ESC0_CLK>;
44 };
45 };
46
47 gpio-keys {
48 compatible = "gpio-keys";
49
50 pinctrl-names = "default";
51 pinctrl-0 = <&gpio_key_default>;
52
53 key-volume-up {
54 label = "Volume Up";
55 gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
56 linux,code = <KEY_VOLUMEUP>;
57 };
58 };
59
60 reserved-memory {
61 qseecom_mem: qseecom@84300000 {
62 reg = <0x0 0x84300000 0x0 0x2000000>;
63 no-map;
64 };
65
66 cont_splash_mem: cont-splash@90001000 {
67 reg = <0x0 0x90001000 0x0 (1080 * 1920 * 3)>;
68 no-map;
69 };
70
71 reserved@aefd2000 {
72 reg = <0x0 0xaefd2000 0x0 0x2e000>;
73 no-map;
74 };
75
76 reserved@eefe4000 {
77 reg = <0x0 0xeefe4000 0x0 0x1c000>;
78 no-map;
79 };
80
81 ramoops@ef000000 {
82 compatible = "ramoops";
83 reg = <0x0 0xef000000 0x0 0x80000>;
84 console-size = <0x40000>;
85 ftrace-size = <0>;
86 record-size = <0x3f800>;
87 pmsg-size = <0x800>;
88 };
89 };
90
91 vph_pwr: vph-pwr-regulator {
92 compatible = "regulator-fixed";
93 regulator-name = "vph_pwr";
94 regulator-always-on;
95 regulator-boot-on;
96 };
97 };
98
99 &hsusb_phy {
100 vdd-supply = <&pm8953_l3>;
101 vdda-pll-supply = <&pm8953_l7>;
102 vdda-phy-dpdm-supply = <&pm8953_l13>;
103
104 status = "okay";
105 };
106
107 &i2c_3 {
108 status = "okay";
109
110 touchscreen@20 {
111 reg = <0x20>;
112 compatible = "syna,rmi4-i2c";
113
114 interrupt-parent = <&tlmm>;
115 interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
116
117 pinctrl-names = "default";
118 pinctrl-0 = <&ts_reset>;
119
120 vdd-supply = <&pm8953_l22>;
121 vio-supply = <&pm8953_l6>;
122
123 syna,reset-delay-ms = <200>;
124 syna,startup-delay-ms = <500>;
125 };
126 };
127
128 &pm8953_resin {
129 linux,code = <KEY_VOLUMEDOWN>;
130 status = "okay";
131 };
132
133 &pmi8950_wled {
134 qcom,current-limit-microamp = <25000>;
135 qcom,num-strings = <3>;
136 qcom,external-pfet;
137 qcom,cabc;
138
139 status = "okay";
140 };
141
142 &rpm_requests {
143 regulators {
144 compatible = "qcom,rpm-pm8953-regulators";
145 vdd_s1-supply = <&vph_pwr>;
146 vdd_s2-supply = <&vph_pwr>;
147 vdd_s3-supply = <&vph_pwr>;
148 vdd_s4-supply = <&vph_pwr>;
149 vdd_s5-supply = <&vph_pwr>;
150 vdd_s6-supply = <&vph_pwr>;
151 vdd_s7-supply = <&vph_pwr>;
152 vdd_l1-supply = <&pm8953_s3>;
153 vdd_l2_l3-supply = <&pm8953_s3>;
154 vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
155 vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
156 vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
157
158 pm8953_s1: s1 {
159 regulator-min-microvolt = <863000>;
160 regulator-max-microvolt = <1152000>;
161 };
162
163 pm8953_s3: s3 {
164 regulator-min-microvolt = <1224000>;
165 regulator-max-microvolt = <1224000>;
166 };
167
168 pm8953_s4: s4 {
169 regulator-min-microvolt = <1896000>;
170 regulator-max-microvolt = <2048000>;
171 };
172
173 pm8953_l1: l1 {
174 regulator-min-microvolt = <1000000>;
175 regulator-max-microvolt = <1100000>;
176 };
177
178 pm8953_l2: l2 {
179 regulator-min-microvolt = <1000000>;
180 regulator-max-microvolt = <1000000>;
181 };
182
183 pm8953_l3: l3 {
184 regulator-min-microvolt = <925000>;
185 regulator-max-microvolt = <925000>;
186 regulator-allow-set-load;
187 };
188
189 pm8953_l5: l5 {
190 regulator-min-microvolt = <1800000>;
191 regulator-max-microvolt = <1800000>;
192 };
193
194 pm8953_l6: l6 {
195 regulator-min-microvolt = <1800000>;
196 regulator-max-microvolt = <1800000>;
197 regulator-always-on;
198 };
199
200 pm8953_l7: l7 {
201 regulator-min-microvolt = <1800000>;
202 regulator-max-microvolt = <1900000>;
203 };
204
205 pm8953_l8: l8 {
206 regulator-min-microvolt = <2900000>;
207 regulator-max-microvolt = <2900000>;
208 };
209
210 pm8953_l9: l9 {
211 regulator-min-microvolt = <3000000>;
212 regulator-max-microvolt = <3300000>;
213 };
214
215 pm8953_l10: l10 {
216 regulator-min-microvolt = <1800000>;
217 regulator-max-microvolt = <1800000>;
218 };
219
220 pm8953_l11: l11 {
221 regulator-min-microvolt = <2800000>;
222 regulator-max-microvolt = <3000000>;
223 };
224
225 pm8953_l12: l12 {
226 regulator-min-microvolt = <1800000>;
227 regulator-max-microvolt = <3000000>;
228 };
229
230 pm8953_l13: l13 {
231 regulator-min-microvolt = <3075000>;
232 regulator-max-microvolt = <3125000>;
233 };
234
235 pm8953_l15: l15 {
236 regulator-min-microvolt = <1800000>;
237 regulator-max-microvolt = <1800000>;
238 };
239
240 pm8953_l16: l16 {
241 regulator-min-microvolt = <1800000>;
242 regulator-max-microvolt = <1800000>;
243 };
244
245 pm8953_l17: l17 {
246 regulator-min-microvolt = <2800000>;
247 regulator-max-microvolt = <3000000>;
248 };
249
250 pm8953_l19: l19 {
251 regulator-min-microvolt = <1200000>;
252 regulator-max-microvolt = <1350000>;
253 };
254
255 pm8953_l22: l22 {
256 regulator-always-on;
257 regulator-min-microvolt = <2800000>;
258 regulator-max-microvolt = <2850000>;
259 };
260
261 pm8953_l23: l23 {
262 regulator-min-microvolt = <975000>;
263 regulator-max-microvolt = <1225000>;
264 };
265 };
266 };
267
268 &sdhc_1 {
269 vmmc-supply = <&pm8953_l8>;
270 vqmmc-supply = <&pm8953_l5>;
271
272 status = "okay";
273 };
274
275 &sdhc_2 {
276 vmmc-supply = <&pm8953_l11>;
277 vqmmc-supply = <&pm8953_l12>;
278
279 cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
280
281 pinctrl-names = "default", "sleep";
282 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>;
283 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
284
285 status = "okay";
286 };
287
288 &tlmm {
289 gpio-reserved-ranges = <1 2>, <96 4>, <111 1>, <126 1>;
290
291 ts_reset: ts-reset-state {
292 pins = "gpio64";
293 function = "gpio";
294 drive-strength = <2>;
295 bias-pull-up;
296 };
297 };
298
299 &usb3 {
300 status = "okay";
301 };
302
303 &usb3_dwc3 {
304 /delete-property/ usb-role-switch;
305 dr_mode = "peripheral";
306 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.