1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
4 */
5
6 #include <dt-bindings/interrupt-controller/arm-gic.h>
7 #include <dt-bindings/clock/qcom,gcc-msm8994.h>
8 #include <dt-bindings/clock/qcom,mmcc-msm8994.h>
9 #include <dt-bindings/clock/qcom,rpmcc.h>
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/power/qcom-rpmpd.h>
12
13 / {
14 interrupt-parent = <&intc>;
15
16 #address-cells = <2>;
17 #size-cells = <2>;
18
19 aliases {
20 mmc1 = &sdhc1;
21 mmc2 = &sdhc2;
22 };
23
24 chosen { };
25
26 clocks {
27 xo_board: xo-board {
28 compatible = "fixed-clock";
29 #clock-cells = <0>;
30 clock-frequency = <19200000>;
31 clock-output-names = "xo_board";
32 };
33
34 sleep_clk: sleep-clk {
35 compatible = "fixed-clock";
36 #clock-cells = <0>;
37 clock-frequency = <32768>;
38 clock-output-names = "sleep_clk";
39 };
40 };
41
42 cpus {
43 #address-cells = <2>;
44 #size-cells = <0>;
45
46 CPU0: cpu@0 {
47 device_type = "cpu";
48 compatible = "arm,cortex-a53";
49 reg = <0x0 0x0>;
50 enable-method = "psci";
51 next-level-cache = <&L2_0>;
52 L2_0: l2-cache {
53 compatible = "cache";
54 cache-level = <2>;
55 cache-unified;
56 };
57 };
58
59 CPU1: cpu@1 {
60 device_type = "cpu";
61 compatible = "arm,cortex-a53";
62 reg = <0x0 0x1>;
63 enable-method = "psci";
64 next-level-cache = <&L2_0>;
65 };
66
67 CPU2: cpu@2 {
68 device_type = "cpu";
69 compatible = "arm,cortex-a53";
70 reg = <0x0 0x2>;
71 enable-method = "psci";
72 next-level-cache = <&L2_0>;
73 };
74
75 CPU3: cpu@3 {
76 device_type = "cpu";
77 compatible = "arm,cortex-a53";
78 reg = <0x0 0x3>;
79 enable-method = "psci";
80 next-level-cache = <&L2_0>;
81 };
82
83 CPU4: cpu@100 {
84 device_type = "cpu";
85 compatible = "arm,cortex-a57";
86 reg = <0x0 0x100>;
87 enable-method = "psci";
88 next-level-cache = <&L2_1>;
89 L2_1: l2-cache {
90 compatible = "cache";
91 cache-level = <2>;
92 cache-unified;
93 };
94 };
95
96 CPU5: cpu@101 {
97 device_type = "cpu";
98 compatible = "arm,cortex-a57";
99 reg = <0x0 0x101>;
100 enable-method = "psci";
101 next-level-cache = <&L2_1>;
102 };
103
104 CPU6: cpu@102 {
105 device_type = "cpu";
106 compatible = "arm,cortex-a57";
107 reg = <0x0 0x102>;
108 enable-method = "psci";
109 next-level-cache = <&L2_1>;
110 };
111
112 CPU7: cpu@103 {
113 device_type = "cpu";
114 compatible = "arm,cortex-a57";
115 reg = <0x0 0x103>;
116 enable-method = "psci";
117 next-level-cache = <&L2_1>;
118 };
119
120 cpu-map {
121 cluster0 {
122 core0 {
123 cpu = <&CPU0>;
124 };
125
126 core1 {
127 cpu = <&CPU1>;
128 };
129
130 core2 {
131 cpu = <&CPU2>;
132 };
133
134 core3 {
135 cpu = <&CPU3>;
136 };
137 };
138
139 cluster1 {
140 core0 {
141 cpu = <&CPU4>;
142 };
143
144 core1 {
145 cpu = <&CPU5>;
146 };
147
148 cpu6_map: core2 {
149 cpu = <&CPU6>;
150 };
151
152 cpu7_map: core3 {
153 cpu = <&CPU7>;
154 };
155 };
156 };
157 };
158
159 firmware {
160 scm {
161 compatible = "qcom,scm-msm8994", "qcom,scm";
162 };
163 };
164
165 memory@80000000 {
166 device_type = "memory";
167 /* We expect the bootloader to fill in the reg */
168 reg = <0 0x80000000 0 0>;
169 };
170
171 pmu {
172 compatible = "arm,cortex-a53-pmu";
173 interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
174 };
175
176 psci {
177 compatible = "arm,psci-0.2";
178 method = "hvc";
179 };
180
181 rpm: remoteproc {
182 compatible = "qcom,msm8994-rpm-proc", "qcom,rpm-proc";
183
184 smd-edge {
185 interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
186 mboxes = <&apcs 0>;
187 qcom,smd-edge = <15>;
188 qcom,remote-pid = <6>;
189
190 rpm_requests: rpm-requests {
191 compatible = "qcom,rpm-msm8994", "qcom,smd-rpm";
192 qcom,smd-channels = "rpm_requests";
193
194 rpmcc: clock-controller {
195 compatible = "qcom,rpmcc-msm8994", "qcom,rpmcc";
196 #clock-cells = <1>;
197 };
198
199 rpmpd: power-controller {
200 compatible = "qcom,msm8994-rpmpd";
201 #power-domain-cells = <1>;
202 operating-points-v2 = <&rpmpd_opp_table>;
203
204 rpmpd_opp_table: opp-table {
205 compatible = "operating-points-v2";
206
207 rpmpd_opp_ret: opp1 {
208 opp-level = <1>;
209 };
210 rpmpd_opp_svs_krait: opp2 {
211 opp-level = <2>;
212 };
213 rpmpd_opp_svs_soc: opp3 {
214 opp-level = <3>;
215 };
216 rpmpd_opp_nom: opp4 {
217 opp-level = <4>;
218 };
219 rpmpd_opp_turbo: opp5 {
220 opp-level = <5>;
221 };
222 rpmpd_opp_super_turbo: opp6 {
223 opp-level = <6>;
224 };
225 };
226 };
227 };
228 };
229 };
230
231 reserved-memory {
232 #address-cells = <2>;
233 #size-cells = <2>;
234 ranges;
235
236 dfps_data_mem: dfps-data@3400000 {
237 reg = <0 0x03400000 0 0x1000>;
238 no-map;
239 };
240
241 cont_splash_mem: memory@3401000 {
242 reg = <0 0x03401000 0 0x2200000>;
243 no-map;
244 };
245
246 smem_mem: smem@6a00000 {
247 reg = <0 0x06a00000 0 0x200000>;
248 no-map;
249 };
250
251 mpss_mem: memory@7000000 {
252 reg = <0 0x07000000 0 0x5a00000>;
253 no-map;
254 };
255
256 peripheral_region: memory@ca00000 {
257 reg = <0 0x0ca00000 0 0x1f00000>;
258 no-map;
259 };
260
261 rmtfs_mem: memory@c6400000 {
262 compatible = "qcom,rmtfs-mem";
263 reg = <0 0xc6400000 0 0x180000>;
264 no-map;
265
266 qcom,client-id = <1>;
267 };
268
269 mba_mem: memory@c6700000 {
270 reg = <0 0xc6700000 0 0x100000>;
271 no-map;
272 };
273
274 audio_mem: memory@c7000000 {
275 reg = <0 0xc7000000 0 0x800000>;
276 no-map;
277 };
278
279 adsp_mem: memory@c9400000 {
280 reg = <0 0xc9400000 0 0x3f00000>;
281 no-map;
282 };
283
284 res_hyp_mem: reserved@6c00000 {
285 reg = <0 0x06c00000 0 0x400000>;
286 no-map;
287 };
288 };
289
290 smem {
291 compatible = "qcom,smem";
292 memory-region = <&smem_mem>;
293 qcom,rpm-msg-ram = <&rpm_msg_ram>;
294 hwlocks = <&tcsr_mutex 3>;
295 };
296
297 smp2p-lpass {
298 compatible = "qcom,smp2p";
299 qcom,smem = <443>, <429>;
300
301 interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
302
303 mboxes = <&apcs 10>;
304
305 qcom,local-pid = <0>;
306 qcom,remote-pid = <2>;
307
308 adsp_smp2p_out: master-kernel {
309 qcom,entry-name = "master-kernel";
310 #qcom,smem-state-cells = <1>;
311 };
312
313 adsp_smp2p_in: slave-kernel {
314 qcom,entry-name = "slave-kernel";
315
316 interrupt-controller;
317 #interrupt-cells = <2>;
318 };
319 };
320
321 smp2p-modem {
322 compatible = "qcom,smp2p";
323 qcom,smem = <435>, <428>;
324
325 interrupt-parent = <&intc>;
326 interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
327
328 mboxes = <&apcs 14>;
329
330 qcom,local-pid = <0>;
331 qcom,remote-pid = <1>;
332
333 modem_smp2p_out: master-kernel {
334 qcom,entry-name = "master-kernel";
335 #qcom,smem-state-cells = <1>;
336 };
337
338 modem_smp2p_in: slave-kernel {
339 qcom,entry-name = "slave-kernel";
340
341 interrupt-controller;
342 #interrupt-cells = <2>;
343 };
344 };
345
346 soc: soc@0 {
347 #address-cells = <1>;
348 #size-cells = <1>;
349 ranges = <0 0 0 0xffffffff>;
350 compatible = "simple-bus";
351
352 intc: interrupt-controller@f9000000 {
353 compatible = "qcom,msm-qgic2";
354 interrupt-controller;
355 #interrupt-cells = <3>;
356 reg = <0xf9000000 0x1000>,
357 <0xf9002000 0x1000>;
358 };
359
360 apcs: mailbox@f900d000 {
361 compatible = "qcom,msm8994-apcs-kpss-global", "syscon";
362 reg = <0xf900d000 0x2000>;
363 #mbox-cells = <1>;
364 };
365
366 watchdog@f9017000 {
367 compatible = "qcom,apss-wdt-msm8994", "qcom,kpss-wdt";
368 reg = <0xf9017000 0x1000>;
369 interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
370 <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
371 clocks = <&sleep_clk>;
372 timeout-sec = <10>;
373 };
374
375 timer@f9020000 {
376 #address-cells = <1>;
377 #size-cells = <1>;
378 ranges;
379 compatible = "arm,armv7-timer-mem";
380 reg = <0xf9020000 0x1000>;
381
382 frame@f9021000 {
383 frame-number = <0>;
384 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
385 <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
386 reg = <0xf9021000 0x1000>,
387 <0xf9022000 0x1000>;
388 };
389
390 frame@f9023000 {
391 frame-number = <1>;
392 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
393 reg = <0xf9023000 0x1000>;
394 status = "disabled";
395 };
396
397 frame@f9024000 {
398 frame-number = <2>;
399 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
400 reg = <0xf9024000 0x1000>;
401 status = "disabled";
402 };
403
404 frame@f9025000 {
405 frame-number = <3>;
406 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
407 reg = <0xf9025000 0x1000>;
408 status = "disabled";
409 };
410
411 frame@f9026000 {
412 frame-number = <4>;
413 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
414 reg = <0xf9026000 0x1000>;
415 status = "disabled";
416 };
417
418 frame@f9027000 {
419 frame-number = <5>;
420 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
421 reg = <0xf9027000 0x1000>;
422 status = "disabled";
423 };
424
425 frame@f9028000 {
426 frame-number = <6>;
427 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
428 reg = <0xf9028000 0x1000>;
429 status = "disabled";
430 };
431 };
432
433 usb3: usb@f92f8800 {
434 compatible = "qcom,msm8994-dwc3", "qcom,dwc3";
435 reg = <0xf92f8800 0x400>;
436 #address-cells = <1>;
437 #size-cells = <1>;
438 ranges;
439
440 clocks = <&gcc GCC_USB30_MASTER_CLK>,
441 <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
442 <&gcc GCC_USB30_SLEEP_CLK>,
443 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
444 clock-names = "core",
445 "iface",
446 "sleep",
447 "mock_utmi";
448
449 assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
450 <&gcc GCC_USB30_MASTER_CLK>;
451 assigned-clock-rates = <19200000>, <120000000>;
452
453 power-domains = <&gcc USB30_GDSC>;
454 qcom,select-utmi-as-pipe-clk;
455
456 usb@f9200000 {
457 compatible = "snps,dwc3";
458 reg = <0xf9200000 0xcc00>;
459 interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
460 snps,dis_u2_susphy_quirk;
461 snps,dis_enblslpm_quirk;
462 maximum-speed = "high-speed";
463 dr_mode = "peripheral";
464 };
465 };
466
467 sdhc1: mmc@f9824900 {
468 compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4";
469 reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
470 reg-names = "hc", "core";
471
472 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
473 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
474 interrupt-names = "hc_irq", "pwr_irq";
475
476 clocks = <&gcc GCC_SDCC1_AHB_CLK>,
477 <&gcc GCC_SDCC1_APPS_CLK>,
478 <&xo_board>;
479 clock-names = "iface", "core", "xo";
480
481 pinctrl-names = "default", "sleep";
482 pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
483 pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
484
485 bus-width = <8>;
486 non-removable;
487 status = "disabled";
488 };
489
490 sdhc2: mmc@f98a4900 {
491 compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4";
492 reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
493 reg-names = "hc", "core";
494
495 interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
496 <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
497 interrupt-names = "hc_irq", "pwr_irq";
498
499 clocks = <&gcc GCC_SDCC2_AHB_CLK>,
500 <&gcc GCC_SDCC2_APPS_CLK>,
501 <&xo_board>;
502 clock-names = "iface", "core", "xo";
503
504 pinctrl-names = "default", "sleep";
505 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
506 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
507
508 cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
509 bus-width = <4>;
510 status = "disabled";
511 };
512
513 blsp1_dma: dma-controller@f9904000 {
514 compatible = "qcom,bam-v1.7.0";
515 reg = <0xf9904000 0x19000>;
516 interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
517 clocks = <&gcc GCC_BLSP1_AHB_CLK>;
518 clock-names = "bam_clk";
519 #dma-cells = <1>;
520 qcom,ee = <0>;
521 qcom,controlled-remotely;
522 num-channels = <24>;
523 qcom,num-ees = <4>;
524 };
525
526 blsp1_uart2: serial@f991e000 {
527 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
528 reg = <0xf991e000 0x1000>;
529 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
530 clock-names = "core", "iface";
531 clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
532 <&gcc GCC_BLSP1_AHB_CLK>;
533 pinctrl-names = "default", "sleep";
534 pinctrl-0 = <&blsp1_uart2_default>;
535 pinctrl-1 = <&blsp1_uart2_sleep>;
536 status = "disabled";
537 };
538
539 blsp1_i2c1: i2c@f9923000 {
540 compatible = "qcom,i2c-qup-v2.2.1";
541 reg = <0xf9923000 0x500>;
542 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
543 clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
544 <&gcc GCC_BLSP1_AHB_CLK>;
545 clock-names = "core", "iface";
546 clock-frequency = <400000>;
547 dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
548 dma-names = "tx", "rx";
549 pinctrl-names = "default", "sleep";
550 pinctrl-0 = <&i2c1_default>;
551 pinctrl-1 = <&i2c1_sleep>;
552 #address-cells = <1>;
553 #size-cells = <0>;
554 status = "disabled";
555 };
556
557 blsp1_spi1: spi@f9923000 {
558 compatible = "qcom,spi-qup-v2.2.1";
559 reg = <0xf9923000 0x500>;
560 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
561 clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
562 <&gcc GCC_BLSP1_AHB_CLK>;
563 clock-names = "core", "iface";
564 dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
565 dma-names = "tx", "rx";
566 pinctrl-names = "default", "sleep";
567 pinctrl-0 = <&blsp1_spi1_default>;
568 pinctrl-1 = <&blsp1_spi1_sleep>;
569 #address-cells = <1>;
570 #size-cells = <0>;
571 status = "disabled";
572 };
573
574 blsp1_i2c2: i2c@f9924000 {
575 compatible = "qcom,i2c-qup-v2.2.1";
576 reg = <0xf9924000 0x500>;
577 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
578 clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
579 <&gcc GCC_BLSP1_AHB_CLK>;
580 clock-names = "core", "iface";
581 clock-frequency = <400000>;
582 dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
583 dma-names = "tx", "rx";
584 pinctrl-names = "default", "sleep";
585 pinctrl-0 = <&i2c2_default>;
586 pinctrl-1 = <&i2c2_sleep>;
587 #address-cells = <1>;
588 #size-cells = <0>;
589 status = "disabled";
590 };
591
592 /* I2C3 doesn't exist */
593
594 blsp1_i2c4: i2c@f9926000 {
595 compatible = "qcom,i2c-qup-v2.2.1";
596 reg = <0xf9926000 0x500>;
597 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
598 clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
599 <&gcc GCC_BLSP1_AHB_CLK>;
600 clock-names = "core", "iface";
601 clock-frequency = <400000>;
602 dmas = <&blsp1_dma 18>, <&blsp1_dma 19>;
603 dma-names = "tx", "rx";
604 pinctrl-names = "default", "sleep";
605 pinctrl-0 = <&i2c4_default>;
606 pinctrl-1 = <&i2c4_sleep>;
607 #address-cells = <1>;
608 #size-cells = <0>;
609 status = "disabled";
610 };
611
612 blsp1_i2c5: i2c@f9927000 {
613 compatible = "qcom,i2c-qup-v2.2.1";
614 reg = <0xf9927000 0x500>;
615 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
616 clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
617 <&gcc GCC_BLSP1_AHB_CLK>;
618 clock-names = "core", "iface";
619 clock-frequency = <400000>;
620 dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
621 dma-names = "tx", "rx";
622 pinctrl-names = "default", "sleep";
623 pinctrl-0 = <&i2c5_default>;
624 pinctrl-1 = <&i2c5_sleep>;
625 #address-cells = <1>;
626 #size-cells = <0>;
627 status = "disabled";
628 };
629
630 blsp1_i2c6: i2c@f9928000 {
631 compatible = "qcom,i2c-qup-v2.2.1";
632 reg = <0xf9928000 0x500>;
633 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
634 clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
635 <&gcc GCC_BLSP1_AHB_CLK>;
636 clock-names = "core", "iface";
637 clock-frequency = <400000>;
638 dmas = <&blsp1_dma 22>, <&blsp1_dma 23>;
639 dma-names = "tx", "rx";
640 pinctrl-names = "default", "sleep";
641 pinctrl-0 = <&i2c6_default>;
642 pinctrl-1 = <&i2c6_sleep>;
643 #address-cells = <1>;
644 #size-cells = <0>;
645 status = "disabled";
646 };
647
648 blsp2_dma: dma-controller@f9944000 {
649 compatible = "qcom,bam-v1.7.0";
650 reg = <0xf9944000 0x19000>;
651 interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
652 clocks = <&gcc GCC_BLSP2_AHB_CLK>;
653 clock-names = "bam_clk";
654 #dma-cells = <1>;
655 qcom,ee = <0>;
656 qcom,controlled-remotely;
657 num-channels = <24>;
658 qcom,num-ees = <4>;
659 };
660
661 blsp2_uart2: serial@f995e000 {
662 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
663 reg = <0xf995e000 0x1000>;
664 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
665 clock-names = "core", "iface";
666 clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
667 <&gcc GCC_BLSP2_AHB_CLK>;
668 dmas = <&blsp2_dma 2>, <&blsp2_dma 3>;
669 dma-names = "tx", "rx";
670 pinctrl-names = "default", "sleep";
671 pinctrl-0 = <&blsp2_uart2_default>;
672 pinctrl-1 = <&blsp2_uart2_sleep>;
673 status = "disabled";
674 };
675
676 blsp2_i2c1: i2c@f9963000 {
677 compatible = "qcom,i2c-qup-v2.2.1";
678 reg = <0xf9963000 0x500>;
679 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
680 clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
681 <&gcc GCC_BLSP2_AHB_CLK>;
682 clock-names = "core", "iface";
683 clock-frequency = <400000>;
684 dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
685 dma-names = "tx", "rx";
686 pinctrl-names = "default", "sleep";
687 pinctrl-0 = <&i2c7_default>;
688 pinctrl-1 = <&i2c7_sleep>;
689 #address-cells = <1>;
690 #size-cells = <0>;
691 status = "disabled";
692 };
693
694 blsp2_spi4: spi@f9966000 {
695 compatible = "qcom,spi-qup-v2.2.1";
696 reg = <0xf9966000 0x500>;
697 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
698 clocks = <&gcc GCC_BLSP2_QUP4_SPI_APPS_CLK>,
699 <&gcc GCC_BLSP2_AHB_CLK>;
700 clock-names = "core", "iface";
701 dmas = <&blsp2_dma 18>, <&blsp2_dma 19>;
702 dma-names = "tx", "rx";
703 pinctrl-names = "default", "sleep";
704 pinctrl-0 = <&blsp2_spi10_default>;
705 pinctrl-1 = <&blsp2_spi10_sleep>;
706 #address-cells = <1>;
707 #size-cells = <0>;
708 status = "disabled";
709 };
710
711 blsp2_i2c5: i2c@f9967000 {
712 compatible = "qcom,i2c-qup-v2.2.1";
713 reg = <0xf9967000 0x500>;
714 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
715 clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>,
716 <&gcc GCC_BLSP2_AHB_CLK>;
717 clock-names = "core", "iface";
718 clock-frequency = <355000>;
719 dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
720 dma-names = "tx", "rx";
721 pinctrl-names = "default", "sleep";
722 pinctrl-0 = <&i2c11_default>;
723 pinctrl-1 = <&i2c11_sleep>;
724 #address-cells = <1>;
725 #size-cells = <0>;
726 status = "disabled";
727 };
728
729 gcc: clock-controller@fc400000 {
730 compatible = "qcom,gcc-msm8994";
731 #clock-cells = <1>;
732 #reset-cells = <1>;
733 #power-domain-cells = <1>;
734 reg = <0xfc400000 0x2000>;
735
736 clock-names = "xo", "sleep";
737 clocks = <&xo_board>, <&sleep_clk>;
738 };
739
740 rpm_msg_ram: sram@fc428000 {
741 compatible = "qcom,rpm-msg-ram";
742 reg = <0xfc428000 0x4000>;
743 };
744
745 restart@fc4ab000 {
746 compatible = "qcom,pshold";
747 reg = <0xfc4ab000 0x4>;
748 };
749
750 spmi_bus: spmi@fc4cf000 {
751 compatible = "qcom,spmi-pmic-arb";
752 reg = <0xfc4cf000 0x1000>,
753 <0xfc4cb000 0x1000>,
754 <0xfc4ca000 0x1000>;
755 reg-names = "core", "intr", "cnfg";
756 interrupt-names = "periph_irq";
757 interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
758 qcom,ee = <0>;
759 qcom,channel = <0>;
760 #address-cells = <2>;
761 #size-cells = <0>;
762 interrupt-controller;
763 #interrupt-cells = <4>;
764 };
765
766 tcsr_mutex: hwlock@fd484000 {
767 compatible = "qcom,msm8994-tcsr-mutex", "qcom,tcsr-mutex";
768 reg = <0xfd484000 0x1000>;
769 #hwlock-cells = <1>;
770 };
771
772 tlmm: pinctrl@fd510000 {
773 compatible = "qcom,msm8994-pinctrl";
774 reg = <0xfd510000 0x4000>;
775 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
776 gpio-controller;
777 gpio-ranges = <&tlmm 0 0 146>;
778 #gpio-cells = <2>;
779 interrupt-controller;
780 #interrupt-cells = <2>;
781
782 blsp1_uart2_default: blsp1-uart2-default-state {
783 pins = "gpio4", "gpio5";
784 function = "blsp_uart2";
785 drive-strength = <16>;
786 bias-disable;
787 };
788
789 blsp1_uart2_sleep: blsp1-uart2-sleep-state {
790 pins = "gpio4", "gpio5";
791 function = "gpio";
792 drive-strength = <2>;
793 bias-pull-down;
794 };
795
796 blsp2_uart2_default: blsp2-uart2-default-state {
797 pins = "gpio45", "gpio46", "gpio47", "gpio48";
798 function = "blsp_uart8";
799 drive-strength = <16>;
800 bias-disable;
801 };
802
803 blsp2_uart2_sleep: blsp2-uart2-sleep-state {
804 pins = "gpio45", "gpio46", "gpio47", "gpio48";
805 function = "gpio";
806 drive-strength = <2>;
807 bias-disable;
808 };
809
810 i2c1_default: i2c1-default-state {
811 pins = "gpio2", "gpio3";
812 function = "blsp_i2c1";
813 drive-strength = <2>;
814 bias-disable;
815 };
816
817 i2c1_sleep: i2c1-sleep-state {
818 pins = "gpio2", "gpio3";
819 function = "gpio";
820 drive-strength = <2>;
821 bias-disable;
822 };
823
824 i2c2_default: i2c2-default-state {
825 pins = "gpio6", "gpio7";
826 function = "blsp_i2c2";
827 drive-strength = <2>;
828 bias-disable;
829 };
830
831 i2c2_sleep: i2c2-sleep-state {
832 pins = "gpio6", "gpio7";
833 function = "gpio";
834 drive-strength = <2>;
835 bias-disable;
836 };
837
838 i2c4_default: i2c4-default-state {
839 pins = "gpio19", "gpio20";
840 function = "blsp_i2c4";
841 drive-strength = <2>;
842 bias-disable;
843 };
844
845 i2c4_sleep: i2c4-sleep-state {
846 pins = "gpio19", "gpio20";
847 function = "gpio";
848 drive-strength = <2>;
849 bias-pull-down;
850 };
851
852 i2c5_default: i2c5-default-state {
853 pins = "gpio23", "gpio24";
854 function = "blsp_i2c5";
855 drive-strength = <2>;
856 bias-disable;
857 };
858
859 i2c5_sleep: i2c5-sleep-state {
860 pins = "gpio23", "gpio24";
861 function = "gpio";
862 drive-strength = <2>;
863 bias-disable;
864 };
865
866 i2c6_default: i2c6-default-state {
867 pins = "gpio28", "gpio27";
868 function = "blsp_i2c6";
869 drive-strength = <2>;
870 bias-disable;
871 };
872
873 i2c6_sleep: i2c6-sleep-state {
874 pins = "gpio28", "gpio27";
875 function = "gpio";
876 drive-strength = <2>;
877 bias-disable;
878 };
879
880 i2c7_default: i2c7-default-state {
881 pins = "gpio44", "gpio43";
882 function = "blsp_i2c7";
883 drive-strength = <2>;
884 bias-disable;
885 };
886
887 i2c7_sleep: i2c7-sleep-state {
888 pins = "gpio44", "gpio43";
889 function = "gpio";
890 drive-strength = <2>;
891 bias-disable;
892 };
893
894 blsp2_spi10_default: blsp2-spi10-default-state {
895 default-pins {
896 pins = "gpio53", "gpio54", "gpio55";
897 function = "blsp_spi10";
898 drive-strength = <10>;
899 bias-pull-down;
900 };
901
902 cs-pins {
903 pins = "gpio67";
904 function = "gpio";
905 drive-strength = <2>;
906 bias-disable;
907 };
908 };
909
910 blsp2_spi10_sleep: blsp2-spi10-sleep-state {
911 pins = "gpio53", "gpio54", "gpio55";
912 function = "gpio";
913 drive-strength = <2>;
914 bias-disable;
915 };
916
917 i2c11_default: i2c11-default-state {
918 pins = "gpio83", "gpio84";
919 function = "blsp_i2c11";
920 drive-strength = <2>;
921 bias-disable;
922 };
923
924 i2c11_sleep: i2c11-sleep-state {
925 pins = "gpio83", "gpio84";
926 function = "gpio";
927 drive-strength = <2>;
928 bias-disable;
929 };
930
931 blsp1_spi1_default: blsp1-spi1-default-state {
932 default-pins {
933 pins = "gpio0", "gpio1", "gpio3";
934 function = "blsp_spi1";
935 drive-strength = <10>;
936 bias-pull-down;
937 };
938
939 cs-pins {
940 pins = "gpio8";
941 function = "gpio";
942 drive-strength = <2>;
943 bias-disable;
944 };
945 };
946
947 blsp1_spi1_sleep: blsp1-spi1-sleep-state {
948 pins = "gpio0", "gpio1", "gpio3";
949 function = "gpio";
950 drive-strength = <2>;
951 bias-disable;
952 };
953
954 sdc1_clk_on: clk-on-state {
955 pins = "sdc1_clk";
956 bias-disable;
957 drive-strength = <16>;
958 };
959
960 sdc1_clk_off: clk-off-state {
961 pins = "sdc1_clk";
962 bias-disable;
963 drive-strength = <2>;
964 };
965
966 sdc1_cmd_on: cmd-on-state {
967 pins = "sdc1_cmd";
968 bias-pull-up;
969 drive-strength = <8>;
970 };
971
972 sdc1_cmd_off: cmd-off-state {
973 pins = "sdc1_cmd";
974 bias-pull-up;
975 drive-strength = <2>;
976 };
977
978 sdc1_data_on: data-on-state {
979 pins = "sdc1_data";
980 bias-pull-up;
981 drive-strength = <8>;
982 };
983
984 sdc1_data_off: data-off-state {
985 pins = "sdc1_data";
986 bias-pull-up;
987 drive-strength = <2>;
988 };
989
990 sdc1_rclk_on: rclk-on-state {
991 pins = "sdc1_rclk";
992 bias-pull-down;
993 };
994
995 sdc1_rclk_off: rclk-off-state {
996 pins = "sdc1_rclk";
997 bias-pull-down;
998 };
999
1000 sdc2_clk_on: sdc2-clk-on-state {
1001 pins = "sdc2_clk";
1002 bias-disable;
1003 drive-strength = <10>;
1004 };
1005
1006 sdc2_clk_off: sdc2-clk-off-state {
1007 pins = "sdc2_clk";
1008 bias-disable;
1009 drive-strength = <2>;
1010 };
1011
1012 sdc2_cmd_on: sdc2-cmd-on-state {
1013 pins = "sdc2_cmd";
1014 bias-pull-up;
1015 drive-strength = <10>;
1016 };
1017
1018 sdc2_cmd_off: sdc2-cmd-off-state {
1019 pins = "sdc2_cmd";
1020 bias-pull-up;
1021 drive-strength = <2>;
1022 };
1023
1024 sdc2_data_on: sdc2-data-on-state {
1025 pins = "sdc2_data";
1026 bias-pull-up;
1027 drive-strength = <10>;
1028 };
1029
1030 sdc2_data_off: sdc2-data-off-state {
1031 pins = "sdc2_data";
1032 bias-pull-up;
1033 drive-strength = <2>;
1034 };
1035 };
1036
1037 mmcc: clock-controller@fd8c0000 {
1038 compatible = "qcom,mmcc-msm8994";
1039 reg = <0xfd8c0000 0x5200>;
1040 #clock-cells = <1>;
1041 #reset-cells = <1>;
1042 #power-domain-cells = <1>;
1043
1044 clock-names = "xo",
1045 "gpll0",
1046 "mmssnoc_ahb",
1047 "oxili_gfx3d_clk_src",
1048 "dsi0pll",
1049 "dsi0pllbyte",
1050 "dsi1pll",
1051 "dsi1pllbyte",
1052 "hdmipll";
1053 clocks = <&xo_board>,
1054 <&gcc GPLL0_OUT_MMSSCC>,
1055 <&rpmcc RPM_SMD_MMSSNOC_AHB_CLK>,
1056 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
1057 <0>,
1058 <0>,
1059 <0>,
1060 <0>,
1061 <0>;
1062
1063 assigned-clocks = <&mmcc MMPLL0_PLL>,
1064 <&mmcc MMPLL1_PLL>,
1065 <&mmcc MMPLL3_PLL>,
1066 <&mmcc MMPLL4_PLL>,
1067 <&mmcc MMPLL5_PLL>;
1068 assigned-clock-rates = <800000000>,
1069 <1167000000>,
1070 <1020000000>,
1071 <960000000>,
1072 <600000000>;
1073 };
1074
1075 ocmem: sram@fdd00000 {
1076 compatible = "qcom,msm8974-ocmem";
1077 reg = <0xfdd00000 0x2000>,
1078 <0xfec00000 0x200000>;
1079 reg-names = "ctrl", "mem";
1080 ranges = <0 0xfec00000 0x200000>;
1081 clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
1082 <&mmcc OCMEMCX_OCMEMNOC_CLK>;
1083 clock-names = "core", "iface";
1084
1085 #address-cells = <1>;
1086 #size-cells = <1>;
1087
1088 gmu_sram: gmu-sram@0 {
1089 reg = <0x0 0x180000>;
1090 };
1091 };
1092 };
1093
1094 timer: timer {
1095 compatible = "arm,armv8-timer";
1096 interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
1097 <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
1098 <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
1099 <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
1100 };
1101
1102 vph_pwr: vph-pwr-regulator {
1103 compatible = "regulator-fixed";
1104 regulator-name = "vph_pwr";
1105
1106 regulator-min-microvolt = <3600000>;
1107 regulator-max-microvolt = <3600000>;
1108
1109 regulator-always-on;
1110 };
1111 };
1112
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.