1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2021, AngeloGioacchino Del Regno
4 * <angelogioacchino.delregno@somainline.org>
5 */
6
7 /dts-v1/;
8
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
12 #include "msm8998.dtsi"
13 #include "pm8005.dtsi"
14 #include "pm8998.dtsi"
15 #include "pmi8998.dtsi"
16
17 / {
18 model = "F(x)tec Pro1 (QX1000)";
19 compatible = "fxtec,pro1", "qcom,msm8998";
20 chassis-type = "handset";
21 qcom,board-id = <0x02000b 0x10>;
22
23 aliases {
24 serial0 = &blsp2_uart1;
25 serial1 = &blsp1_uart3;
26 };
27
28 /*
29 * Until we hook up type-c detection, we
30 * have to stick with this. But it works.
31 */
32 extcon_usb: extcon-usb {
33 compatible = "linux,extcon-usb-gpio";
34 id-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
35 };
36
37 gpio-hall-sensors {
38 compatible = "gpio-keys";
39 label = "Hall sensors";
40 pinctrl-names = "default";
41 pinctrl-0 = <&hall_sensor1_default>;
42
43 event-hall-sensor1 {
44 label = "Keyboard Hall Sensor";
45 gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
46 debounce-interval = <15>;
47 wakeup-source;
48 linux,input-type = <EV_SW>;
49 linux,code = <SW_KEYPAD_SLIDE>;
50 };
51 };
52
53 gpio-kb-extra-keys {
54 compatible = "gpio-keys";
55 label = "Keyboard extra keys";
56 pinctrl-names = "default";
57 pinctrl-0 = <&gpio_kb_pins_extra>;
58
59 key-home {
60 label = "Home";
61 gpios = <&tlmm 21 GPIO_ACTIVE_LOW>;
62 linux,code = <KEY_HOMEPAGE>;
63 debounce-interval = <15>;
64 linux,can-disable;
65 };
66
67 key-super-l {
68 label = "Super Left";
69 gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
70 linux,code = <KEY_FN>;
71 debounce-interval = <15>;
72 linux,can-disable;
73 };
74
75 key-super-r {
76 label = "Super Right";
77 gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
78 linux,code = <KEY_FN>;
79 debounce-interval = <15>;
80 linux,can-disable;
81 };
82
83 key-shift {
84 label = "Shift";
85 gpios = <&tlmm 114 GPIO_ACTIVE_LOW>;
86 linux,code = <KEY_RIGHTSHIFT>;
87 debounce-interval = <15>;
88 linux,can-disable;
89 };
90
91 key-ctrl {
92 label = "Ctrl";
93 gpios = <&tlmm 128 GPIO_ACTIVE_LOW>;
94 linux,code = <KEY_LEFTCTRL>;
95 debounce-interval = <15>;
96 linux,can-disable;
97 };
98
99 key-alt {
100 label = "Alt";
101 gpios = <&tlmm 129 GPIO_ACTIVE_LOW>;
102 linux,code = <KEY_LEFTALT>;
103 debounce-interval = <15>;
104 linux,can-disable;
105 };
106 };
107
108 gpio-keys {
109 compatible = "gpio-keys";
110 label = "Side buttons";
111 pinctrl-names = "default";
112 pinctrl-0 = <&vol_up_pin_a>, <&cam_focus_pin_a>,
113 <&cam_snapshot_pin_a>;
114 button-vol-up {
115 label = "Volume Up";
116 gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
117 linux,input-type = <EV_KEY>;
118 linux,code = <KEY_VOLUMEUP>;
119 wakeup-source;
120 debounce-interval = <15>;
121 };
122
123 button-camera-snapshot {
124 label = "Camera Snapshot";
125 gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
126 linux,input-type = <EV_KEY>;
127 linux,code = <KEY_CAMERA>;
128 debounce-interval = <15>;
129 };
130
131 button-camera-focus {
132 label = "Camera Focus";
133 gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
134 linux,input-type = <EV_KEY>;
135 linux,code = <KEY_CAMERA_FOCUS>;
136 debounce-interval = <15>;
137 };
138 };
139
140 keyboard-leds {
141 compatible = "gpio-leds";
142
143 led-0 {
144 color = <LED_COLOR_ID_WHITE>;
145 default-state = "off";
146 function = LED_FUNCTION_KBD_BACKLIGHT;
147 gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
148 label = "white:kbd_backlight";
149 retain-state-suspended;
150 };
151
152 led-1 {
153 color = <LED_COLOR_ID_YELLOW>;
154 default-state = "off";
155 function = LED_FUNCTION_CAPSLOCK;
156 gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
157 label = "yellow:capslock";
158 linux,default-trigger = "kbd-capslock";
159 };
160 };
161
162 reserved-memory {
163 cont_splash_mem: memory@9d400000 {
164 reg = <0x0 0x9d400000 0x0 0x2000000>;
165 no-map;
166 };
167
168 zap_shader_region: memory@f6400000 {
169 compatible = "shared-dma-pool";
170 reg = <0x0 0xf6400000 0x0 0x2000>;
171 no-map;
172 };
173
174 ramoops@ffc00000 {
175 compatible = "ramoops";
176 reg = <0x0 0xffc00000 0x0 0x100000>;
177 console-size = <0x60000>;
178 ecc-size = <16>;
179 ftrace-size = <0x10000>;
180 pmsg-size = <0x20000>;
181 record-size = <0x10000>;
182 };
183 };
184
185 ts_vio_vreg: ts-vio-vreg {
186 compatible = "regulator-fixed";
187 regulator-name = "ts_vio_reg";
188 startup-delay-us = <2>;
189 enable-active-high;
190 gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
191 pinctrl-names = "default";
192 pinctrl-0 = <&ts_vio_default>;
193 regulator-always-on;
194 };
195
196 vph_pwr: vph-pwr-regulator {
197 compatible = "regulator-fixed";
198 regulator-name = "vph_pwr";
199 regulator-always-on;
200 regulator-boot-on;
201 };
202 };
203
204 &blsp1_uart3 {
205 status = "okay";
206
207 bluetooth {
208 compatible = "qcom,wcn3990-bt";
209
210 vddio-supply = <&vreg_s4a_1p8>;
211 vddxo-supply = <&vreg_l7a_1p8>;
212 vddrf-supply = <&vreg_l17a_1p3>;
213 vddch0-supply = <&vreg_l25a_3p3>;
214 max-speed = <3200000>;
215 };
216 };
217
218 &blsp1_uart3_on {
219 rx-pins {
220 /delete-property/ bias-disable;
221 /*
222 * Configure a pull-up on 45 (RX). This is needed to
223 * avoid garbage data when the TX pin of the Bluetooth
224 * module is in tri-state (module powered off or not
225 * driving the signal yet).
226 */
227 bias-pull-up;
228 };
229
230 cts-pins {
231 /delete-property/ bias-disable;
232 /*
233 * Configure a pull-down on 47 (CTS) to match the pull
234 * of the Bluetooth module.
235 */
236 bias-pull-down;
237 };
238 };
239
240 &blsp2_uart1 {
241 status = "okay";
242 };
243
244 &blsp2_i2c1 {
245 status = "okay";
246
247 touchscreen@14 {
248 compatible = "goodix,gt9286";
249 reg = <0x14>;
250 interrupt-parent = <&tlmm>;
251 interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
252 reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
253 AVDD28-supply = <&vreg_l28_3p0>;
254 VDDIO-supply = <&ts_vio_vreg>;
255 pinctrl-names = "active";
256 pinctrl-0 = <&ts_rst_n>, <&ts_int_n>;
257 };
258 };
259
260 &etf {
261 status = "okay";
262 };
263
264 &etm1 {
265 status = "okay";
266 };
267
268 &etm2 {
269 status = "okay";
270 };
271
272 &etm3 {
273 status = "okay";
274 };
275
276 &etm4 {
277 status = "okay";
278 };
279
280 &etm5 {
281 status = "okay";
282 };
283
284 &etm6 {
285 status = "okay";
286 };
287
288 &etm7 {
289 status = "okay";
290 };
291
292 &etm8 {
293 status = "okay";
294 };
295
296 &etr {
297 status = "okay";
298 };
299
300 &funnel1 {
301 status = "okay";
302 };
303
304 &funnel2 {
305 status = "okay";
306 };
307
308 &funnel3 {
309 status = "okay";
310 };
311
312 &funnel4 {
313 /* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */
314 };
315
316 &funnel5 {
317 /* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */
318 };
319
320 &pcie0 {
321 status = "okay";
322 };
323
324 &pcie_phy {
325 status = "okay";
326 };
327
328 &pm8005_regulators {
329 vdd_s1-supply = <&vph_pwr>;
330
331 pm8005_s1: s1 { /* VDD_GFX supply */
332 regulator-min-microvolt = <524000>;
333 regulator-max-microvolt = <1100000>;
334 regulator-enable-ramp-delay = <500>;
335
336 /* Hack until we rig up the gpu consumer */
337 regulator-always-on;
338 };
339 };
340
341 &pm8998_gpios {
342 vol_up_pin_a: vol-up-active-state {
343 pins = "gpio6";
344 function = "normal";
345 bias-pull-up;
346 input-enable;
347 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
348 };
349
350 cam_focus_pin_a: cam-focus-btn-active-state {
351 pins = "gpio7";
352 function = "normal";
353 bias-pull-up;
354 input-enable;
355 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
356 };
357
358 cam_snapshot_pin_a: cam-snapshot-btn-active-state {
359 pins = "gpio8";
360 function = "normal";
361 bias-pull-up;
362 input-enable;
363 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
364 };
365 };
366
367 &pm8998_resin {
368 linux,code = <KEY_VOLUMEDOWN>;
369 status = "okay";
370 };
371
372 &qusb2phy {
373 status = "okay";
374
375 vdda-pll-supply = <&vreg_l12a_1p8>;
376 vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
377 };
378
379 &replicator1 {
380 status = "okay";
381 };
382
383 &rpm_requests {
384 regulators-0 {
385 compatible = "qcom,rpm-pm8998-regulators";
386
387 vdd_s1-supply = <&vph_pwr>;
388 vdd_s2-supply = <&vph_pwr>;
389 vdd_s3-supply = <&vph_pwr>;
390 vdd_s4-supply = <&vph_pwr>;
391 vdd_s5-supply = <&vph_pwr>;
392 vdd_s6-supply = <&vph_pwr>;
393 vdd_s7-supply = <&vph_pwr>;
394 vdd_s8-supply = <&vph_pwr>;
395 vdd_s9-supply = <&vph_pwr>;
396 vdd_s10-supply = <&vph_pwr>;
397 vdd_s11-supply = <&vph_pwr>;
398 vdd_s12-supply = <&vph_pwr>;
399 vdd_s13-supply = <&vph_pwr>;
400 vdd_l1_l27-supply = <&vreg_s7a_1p025>;
401 vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
402 vdd_l3_l11-supply = <&vreg_s7a_1p025>;
403 vdd_l4_l5-supply = <&vreg_s7a_1p025>;
404 vdd_l6-supply = <&vreg_s5a_2p04>;
405 vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
406 vdd_l9-supply = <&vreg_bob>;
407 vdd_l10_l23_l25-supply = <&vreg_bob>;
408 vdd_l13_l19_l21-supply = <&vreg_bob>;
409 vdd_l16_l28-supply = <&vreg_bob>;
410 vdd_l18_l22-supply = <&vreg_bob>;
411 vdd_l20_l24-supply = <&vreg_bob>;
412 vdd_l26-supply = <&vreg_s3a_1p35>;
413 vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
414
415 vreg_s3a_1p35: s3 {
416 regulator-min-microvolt = <1352000>;
417 regulator-max-microvolt = <1352000>;
418 };
419
420 vreg_s4a_1p8: s4 {
421 regulator-min-microvolt = <1800000>;
422 regulator-max-microvolt = <1800000>;
423 regulator-allow-set-load;
424 };
425
426 vreg_s5a_2p04: s5 {
427 regulator-min-microvolt = <1904000>;
428 regulator-max-microvolt = <2040000>;
429 };
430
431 vreg_s7a_1p025: s7 {
432 regulator-min-microvolt = <900000>;
433 regulator-max-microvolt = <1028000>;
434 };
435
436 vreg_l1a_0p875: l1 {
437 regulator-min-microvolt = <880000>;
438 regulator-max-microvolt = <880000>;
439 };
440
441 vreg_l2a_1p2: l2 {
442 regulator-min-microvolt = <1200000>;
443 regulator-max-microvolt = <1200000>;
444 };
445
446 vreg_l3a_1p0: l3 {
447 regulator-min-microvolt = <1000000>;
448 regulator-max-microvolt = <1000000>;
449 };
450
451 vreg_l5a_0p8: l5 {
452 regulator-min-microvolt = <800000>;
453 regulator-max-microvolt = <800000>;
454 };
455
456 vreg_l6a_1p8: l6 {
457 regulator-min-microvolt = <1808000>;
458 regulator-max-microvolt = <1808000>;
459 };
460
461 vreg_l7a_1p8: l7 {
462 regulator-min-microvolt = <1800000>;
463 regulator-max-microvolt = <1800000>;
464 };
465
466 vreg_l8a_1p2: l8 {
467 regulator-min-microvolt = <1200000>;
468 regulator-max-microvolt = <1200000>;
469 };
470
471 vreg_l9a_1p8: l9 {
472 regulator-min-microvolt = <1808000>;
473 regulator-max-microvolt = <2960000>;
474 };
475
476 vreg_l10a_1p8: l10 {
477 regulator-min-microvolt = <1808000>;
478 regulator-max-microvolt = <2960000>;
479 };
480
481 vreg_l11a_1p0: l11 {
482 regulator-min-microvolt = <1000000>;
483 regulator-max-microvolt = <1000000>;
484 };
485
486 vreg_l12a_1p8: l12 {
487 regulator-min-microvolt = <1800000>;
488 regulator-max-microvolt = <1800000>;
489 };
490
491 vreg_l13a_2p95: l13 {
492 regulator-min-microvolt = <1808000>;
493 regulator-max-microvolt = <2960000>;
494 };
495
496 vreg_l14a_1p88: l14 {
497 regulator-min-microvolt = <1880000>;
498 regulator-max-microvolt = <1880000>;
499 };
500
501 vreg_l15a_1p8: l15 {
502 regulator-min-microvolt = <1800000>;
503 regulator-max-microvolt = <1800000>;
504 };
505
506 vreg_l16a_2p7: l16 {
507 regulator-min-microvolt = <2704000>;
508 regulator-max-microvolt = <2704000>;
509 };
510
511 vreg_l17a_1p3: l17 {
512 regulator-min-microvolt = <1304000>;
513 regulator-max-microvolt = <1304000>;
514 };
515
516 vreg_l18a_2p7: l18 {
517 regulator-min-microvolt = <2704000>;
518 regulator-max-microvolt = <2704000>;
519 };
520
521 vreg_l19a_3p0: l19 {
522 regulator-min-microvolt = <3008000>;
523 regulator-max-microvolt = <3008000>;
524 };
525
526 vreg_l20a_2p95: l20 {
527 regulator-min-microvolt = <2960000>;
528 regulator-max-microvolt = <2960000>;
529 regulator-allow-set-load;
530 };
531
532 vreg_l21a_2p95: l21 {
533 regulator-min-microvolt = <2960000>;
534 regulator-max-microvolt = <2960000>;
535 regulator-system-load = <800000>;
536 regulator-allow-set-load;
537 };
538
539 vreg_l22a_2p85: l22 {
540 regulator-min-microvolt = <2864000>;
541 regulator-max-microvolt = <2864000>;
542 };
543
544 vreg_l23a_3p3: l23 {
545 regulator-min-microvolt = <3312000>;
546 regulator-max-microvolt = <3312000>;
547 };
548
549 vreg_l24a_3p075: l24 {
550 regulator-min-microvolt = <3088000>;
551 regulator-max-microvolt = <3088000>;
552 };
553
554 vreg_l25a_3p3: l25 {
555 regulator-min-microvolt = <3104000>;
556 regulator-max-microvolt = <3312000>;
557 };
558
559 vreg_l26a_1p2: l26 {
560 regulator-min-microvolt = <1200000>;
561 regulator-max-microvolt = <1200000>;
562 regulator-allow-set-load;
563 };
564
565 vreg_l28_3p0: l28 {
566 regulator-min-microvolt = <3008000>;
567 regulator-max-microvolt = <3008000>;
568 };
569
570 vreg_lvs1a_1p8: lvs1 {
571 regulator-min-microvolt = <1800000>;
572 regulator-max-microvolt = <1800000>;
573 };
574
575 vreg_lvs2a_1p8: lvs2 {
576 regulator-min-microvolt = <1800000>;
577 regulator-max-microvolt = <1800000>;
578 };
579
580 };
581
582 regulators-1 {
583 compatible = "qcom,rpm-pmi8998-regulators";
584
585 vdd_bob-supply = <&vph_pwr>;
586
587 vreg_bob: bob {
588 regulator-min-microvolt = <3312000>;
589 regulator-max-microvolt = <3600000>;
590 };
591 };
592 };
593
594 &remoteproc_adsp {
595 status = "okay";
596 };
597
598 &remoteproc_mss {
599 status = "okay";
600 };
601
602 &remoteproc_slpi {
603 status = "okay";
604 };
605
606 &tlmm {
607 gpio-reserved-ranges = <0 4>;
608
609 mdp_vsync_n: mdp-vsync-n-state {
610 pins = "gpio10";
611 function = "mdp_vsync_a";
612 bias-pull-down;
613 drive-strength = <2>;
614 };
615
616 gpio_kb_pins_extra: gpio-kb-pins-extra-state {
617 pins = "gpio21", "gpio32", "gpio33", "gpio114",
618 "gpio128", "gpio129";
619 function = "gpio";
620 drive-strength = <2>;
621 bias-pull-up;
622 };
623
624 ts_vio_default: ts-vio-def-state {
625 pins = "gpio81";
626 function = "gpio";
627 bias-disable;
628 drive-strength = <2>;
629 };
630
631 ts_rst_n: ts-rst-n-state {
632 pins = "gpio89";
633 function = "gpio";
634 bias-pull-up;
635 drive-strength = <8>;
636 };
637
638 hall_sensor1_default: hall-sensor1-def-state {
639 pins = "gpio124";
640 function = "gpio";
641 bias-disable;
642 drive-strength = <2>;
643 };
644
645 ts_int_n: ts-int-n-state {
646 pins = "gpio125";
647 function = "gpio";
648 bias-disable;
649 drive-strength = <8>;
650 };
651 };
652
653 &sdhc2 {
654 status = "okay";
655 cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>;
656
657 vmmc-supply = <&vreg_l21a_2p95>;
658 vqmmc-supply = <&vreg_l13a_2p95>;
659
660 pinctrl-names = "default", "sleep";
661 pinctrl-0 = <&sdc2_on &sdc2_cd>;
662 pinctrl-1 = <&sdc2_off &sdc2_cd>;
663 };
664
665 &stm {
666 status = "okay";
667 };
668
669 &ufshc {
670 status = "okay";
671 vcc-supply = <&vreg_l20a_2p95>;
672 vccq-supply = <&vreg_l26a_1p2>;
673 vccq2-supply = <&vreg_s4a_1p8>;
674 vdd-hba-supply = <&vreg_l26a_1p2>;
675 vcc-max-microamp = <750000>;
676 vccq-max-microamp = <560000>;
677 vccq2-max-microamp = <750000>;
678 };
679
680 &ufsphy {
681 status = "okay";
682 vdda-phy-supply = <&vreg_l1a_0p875>;
683 vdda-pll-supply = <&vreg_l2a_1p2>;
684 };
685
686 &usb3 {
687 status = "okay";
688 };
689
690 &usb3_dwc3 {
691 dr_mode = "peripheral";
692 extcon = <&extcon_usb>;
693 };
694
695 &usb3phy {
696 status = "okay";
697
698 vdda-phy-supply = <&vreg_l1a_0p875>;
699 vdda-pll-supply = <&vreg_l2a_1p2>;
700 };
701
702 /* GT9286 analog supply */
703 &vreg_l28_3p0 {
704 regulator-min-microvolt = <2800000>;
705 regulator-max-microvolt = <2800000>;
706 };
707
708 &wifi {
709 status = "okay";
710
711 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
712 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
713 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
714 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
715 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.