1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2021, AngeloGioacchino Del Regno
4 * <angelogioacchino.delregno@somainline.org>
5 * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
6 */
7
8 #include <dt-bindings/input/input.h>
9 #include <dt-bindings/leds/common.h>
10 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
11 #include "msm8998.dtsi"
12 #include "pm8005.dtsi"
13 #include "pm8998.dtsi"
14 #include "pmi8998.dtsi"
15
16 / {
17 /* required for bootloader to select correct board */
18 qcom,msm-id = <0x124 0x20000>, <0x124 0x20001>; /* 8998v2, v2.1 */
19 qcom,board-id = <8 0>;
20
21 clocks {
22 div1_mclk: divclk1 {
23 compatible = "gpio-gate-clock";
24 pinctrl-0 = <&div_clk1>;
25 pinctrl-names = "default";
26 clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
27 #clock-cells = <0>;
28 enable-gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
29 };
30 };
31
32 board_vbat: vbat-regulator {
33 compatible = "regulator-fixed";
34 regulator-name = "VBAT";
35
36 regulator-min-microvolt = <4000000>;
37 regulator-max-microvolt = <4000000>;
38 regulator-always-on;
39 regulator-boot-on;
40 };
41
42 cam0_vdig_vreg: cam0-vdig {
43 compatible = "regulator-fixed";
44 regulator-name = "cam0_vdig";
45 startup-delay-us = <0>;
46 enable-active-high;
47 gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>;
48 pinctrl-names = "default";
49 pinctrl-0 = <&main_cam_pwr_en>;
50 };
51
52 cam1_vdig_vreg: cam1-vdig {
53 compatible = "regulator-fixed";
54 regulator-name = "cam1_vdig";
55 startup-delay-us = <0>;
56 enable-active-high;
57 gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
58 pinctrl-names = "default";
59 pinctrl-0 = <&chat_cam_pwr_en>;
60 vin-supply = <&vreg_s3a_1p35>;
61 };
62
63 cam_vio_vreg: cam-vio-vreg {
64 compatible = "regulator-fixed";
65 regulator-name = "cam_vio_vreg";
66 startup-delay-us = <0>;
67 enable-active-high;
68 gpio = <&pmi8998_gpios 1 GPIO_ACTIVE_HIGH>;
69 pinctrl-names = "default";
70 pinctrl-0 = <&main_cam_pwr_io_en>;
71 vin-supply = <&vreg_lvs1a_1p8>;
72 };
73
74 touch_vddio_vreg: touch-vddio-vreg {
75 compatible = "regulator-fixed";
76 regulator-name = "touch_vddio_vreg";
77 startup-delay-us = <10000>;
78 gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>;
79 pinctrl-names = "default";
80 pinctrl-0 = <&ts_vddio_en>;
81 };
82
83 vph_pwr: vph-pwr-regulator {
84 compatible = "regulator-fixed";
85 regulator-name = "vph_pwr";
86 regulator-always-on;
87 regulator-boot-on;
88 };
89
90 extcon_usb: extcon-usb {
91 compatible = "linux,extcon-usb-gpio";
92 id-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
93 vbus-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
94 pinctrl-names = "default";
95 pinctrl-0 = <&cc_dir_default &usb_detect_en>;
96 };
97
98 gpio-keys {
99 compatible = "gpio-keys";
100 label = "Side buttons";
101 pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &vol_up_n>;
102 pinctrl-names = "default";
103 button-camera-focus {
104 label = "Camera Focus";
105 gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
106 linux,code = <KEY_CAMERA_FOCUS>;
107 debounce-interval = <15>;
108 };
109
110 button-camera-snapshot {
111 label = "Camera Snapshot";
112 gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
113 linux,code = <KEY_CAMERA>;
114 debounce-interval = <15>;
115 };
116
117 button-vol-down {
118 label = "Volume Down";
119 gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
120 linux,code = <KEY_VOLUMEDOWN>;
121 wakeup-source;
122 debounce-interval = <15>;
123 };
124
125 button-vol-up {
126 label = "Volume Up";
127 gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
128 linux,code = <KEY_VOLUMEUP>;
129 wakeup-source;
130 debounce-interval = <15>;
131 };
132 };
133
134 gpio-hall-sensor {
135 compatible = "gpio-keys";
136 label = "Hall sensors";
137 pinctrl-names = "default";
138 pinctrl-0 = <&acc_cover_open>;
139
140 event-hall-sensor0 {
141 label = "Cover Hall Sensor";
142 gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
143 linux,input-type = <EV_SW>;
144 linux,code = <SW_LID>;
145 wakeup-source;
146 debounce-interval = <30>;
147 };
148 };
149
150 reserved-memory {
151 #address-cells = <2>;
152 #size-cells = <2>;
153 ranges;
154
155 hyp_mem: memory@85800000 {
156 reg = <0x0 0x85800000 0x0 0x3700000>;
157 no-map;
158 };
159
160 cont_splash_mem: memory@9d400000 {
161 reg = <0x0 0x9d400000 0x0 0x2400000>;
162 no-map;
163 };
164
165 zap_shader_region: memory@f6400000 {
166 compatible = "shared-dma-pool";
167 reg = <0x0 0xf6400000 0x0 0x2000>;
168 no-map;
169 };
170
171 adsp_region: memory@fe000000 {
172 reg = <0x0 0xfe000000 0x0 0x800000>;
173 no-map;
174 };
175
176 qseecom_region: memory@fe800000 {
177 reg = <0x0 0xfe800000 0x0 0x1400000>;
178 no-map;
179 };
180
181 ramoops@ffc00000 {
182 compatible = "ramoops";
183 reg = <0x0 0xffc00000 0x0 0x100000>;
184 record-size = <0x10000>;
185 console-size = <0x60000>;
186 ftrace-size = <0x10000>;
187 pmsg-size = <0x20000>;
188 ecc-size = <16>;
189 };
190 };
191
192 vibrator {
193 compatible = "gpio-vibrator";
194 enable-gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>;
195 pinctrl-names = "default";
196 pinctrl-0 = <&vib_ldo_en>;
197 };
198 };
199
200 &blsp1_i2c5 {
201 status = "okay";
202 clock-frequency = <355000>;
203
204 touchscreen@2c {
205 compatible = "syna,rmi4-i2c";
206 reg = <0x2c>;
207 #address-cells = <1>;
208 #size-cells = <0>;
209 interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
210
211 pinctrl-names = "default";
212 pinctrl-0 = <&ts_int_n>;
213
214 vdd-supply = <&vreg_l28_3p0>;
215 vio-supply = <&touch_vddio_vreg>;
216
217 syna,reset-delay-ms = <220>;
218 syna,startup-delay-ms = <1000>;
219
220 rmi4-f01@1 {
221 reg = <0x01>;
222 syna,nosleep-mode = <1>;
223 };
224
225 rmi4-f11@11 {
226 reg = <0x11>;
227 syna,sensor-type = <1>;
228 };
229 };
230 };
231
232 &blsp1_i2c5_sleep {
233 bias-disable;
234 };
235
236 &blsp1_uart3 {
237 status = "okay";
238
239 bluetooth {
240 compatible = "qcom,wcn3990-bt";
241
242 vddio-supply = <&vreg_s4a_1p8>;
243 vddxo-supply = <&vreg_l7a_1p8>;
244 vddrf-supply = <&vreg_l17a_1p3>;
245 vddch0-supply = <&vreg_l25a_3p3>;
246 max-speed = <3200000>;
247
248 clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
249 };
250 };
251
252 &blsp2_uart1 {
253 status = "okay";
254 };
255
256 &blsp2_i2c2 {
257 status = "okay";
258
259 proximity@29 {
260 compatible = "st,vl53l0x";
261 reg = <0x29>;
262
263 interrupt-parent = <&tlmm>;
264 interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
265
266 reset-gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
267 vdd-supply = <&cam_vio_vreg>;
268
269 pinctrl-names = "default";
270 pinctrl-0 = <&tof_int_n &tof_reset>;
271 };
272 };
273
274 &ibb {
275 regulator-min-microamp = <800000>;
276 regulator-max-microamp = <800000>;
277 regulator-enable-ramp-delay = <200>;
278 regulator-over-current-protection;
279 regulator-pull-down;
280 regulator-ramp-delay = <1>;
281 regulator-settling-time-up-us = <600>;
282 regulator-settling-time-down-us = <1000>;
283 regulator-soft-start;
284 qcom,discharge-resistor-kohms = <300>;
285 };
286
287 &lab {
288 regulator-min-microamp = <200000>;
289 regulator-max-microamp = <200000>;
290 regulator-enable-ramp-delay = <500>;
291 regulator-over-current-protection;
292 regulator-pull-down;
293 regulator-ramp-delay = <1>;
294 regulator-settling-time-up-us = <50000>;
295 regulator-settling-time-down-us = <3000>;
296 regulator-soft-start;
297 };
298
299 &pm8005_gpios {
300 gpio-line-names = "NC", /* GPIO_1 */
301 "NC",
302 "SLB",
303 "OPTION_1_PM8005";
304 };
305
306 &pm8005_regulators {
307 /* VDD_GFX supply */
308 pm8005_s1: s1 {
309 regulator-min-microvolt = <524000>;
310 regulator-max-microvolt = <1088000>;
311 regulator-enable-ramp-delay = <500>;
312 /* Hack until we rig up the gpu consumer */
313 regulator-always-on;
314 };
315 };
316
317 &pm8998_gpios {
318 gpio-line-names = "UIM_BATT_ALARM", /* GPIO_1 */
319 "NC",
320 "WLAN_SW_CTRL (DISALLOWED)",
321 "SSC_PWR_EN",
322 "VOL_DOWN_N",
323 "VOL_UP_N",
324 "SNAPSHOT_N",
325 "FOCUS_N",
326 "FLASH_THERM",
327 "", /* GPIO_10 */
328 "",
329 "",
330 "DIV_CLK1",
331 "NC",
332 "NC (DISALLOWED)",
333 "DIV_CLK3",
334 "NC",
335 "NC",
336 "NC",
337 "NC (DISALLOWED)", /* GPIO_20 */
338 "NFC_CLK_REQ",
339 "NC (DISALLOWED)",
340 "WCSS_PWR_REQ",
341 "OPTION_1 (DISALLOWED)",
342 "OPTION_2 (DISALLOWED)",
343 "PM_SLB (DISALLOWED)";
344
345 vol_down_n: vol-down-n-state {
346 pins = "gpio5";
347 function = PMIC_GPIO_FUNC_NORMAL;
348 bias-pull-up;
349 input-enable;
350 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
351 };
352
353 vol_up_n: vol-up-n-state {
354 pins = "gpio6";
355 function = PMIC_GPIO_FUNC_NORMAL;
356 bias-pull-up;
357 input-enable;
358 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
359 };
360
361 focus_n: focus-n-state {
362 pins = "gpio7";
363 function = PMIC_GPIO_FUNC_NORMAL;
364 bias-pull-up;
365 input-enable;
366 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
367 };
368
369 snapshot_n: snapshot-n-state {
370 pins = "gpio8";
371 function = PMIC_GPIO_FUNC_NORMAL;
372 bias-pull-up;
373 input-enable;
374 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
375 };
376
377 div_clk1: div-clk1-state {
378 pins = "gpio13";
379 function = "func2";
380 power-source = <0>;
381 };
382 };
383
384 &pmi8998_gpios {
385 gpio-line-names = "MAIN_CAM_PWR_IO_EN", /* GPIO_1 */
386 "NC",
387 "NC",
388 "TYPEC_UUSB_SEL",
389 "VIB_LDO_EN",
390 "NC",
391 "DISPLAY_TYPE_SEL",
392 "NC",
393 "NC",
394 "NC", /* GPIO_10 */
395 "NC",
396 "DIV_CLK3",
397 "SPMI_I2C_SEL",
398 "NC";
399
400 main_cam_pwr_io_en: main-cam-pwr-io-en-state {
401 pins = "gpio1";
402 function = PMIC_GPIO_FUNC_NORMAL;
403 bias-disable;
404 drive-push-pull;
405 output-low;
406 qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
407 power-source = <1>;
408 };
409
410 vib_ldo_en: vib-ldo-en-state {
411 pins = "gpio5";
412 function = PMIC_GPIO_FUNC_NORMAL;
413 bias-disable;
414 drive-push-pull;
415 output-low;
416 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
417 power-source = <0>;
418 };
419 };
420
421 &pmi8998_lpg {
422 qcom,power-source = <1>;
423
424 status = "okay";
425
426 multi-led {
427 color = <LED_COLOR_ID_RGB>;
428 function = LED_FUNCTION_STATUS;
429
430 #address-cells = <1>;
431 #size-cells = <0>;
432
433 led@3 {
434 reg = <3>;
435 color = <LED_COLOR_ID_BLUE>;
436 };
437
438 led@4 {
439 reg = <4>;
440 color = <LED_COLOR_ID_GREEN>;
441 };
442
443 led@5 {
444 reg = <5>;
445 color = <LED_COLOR_ID_RED>;
446 };
447 };
448 };
449
450 &qusb2phy {
451 status = "okay";
452
453 vdda-pll-supply = <&vreg_l12a_1p8>;
454 vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
455 };
456
457 &rpm_requests {
458 regulators-0 {
459 compatible = "qcom,rpm-pm8998-regulators";
460
461 vdd_s1-supply = <&vph_pwr>;
462 vdd_s2-supply = <&vph_pwr>;
463 vdd_s3-supply = <&vph_pwr>;
464 vdd_s4-supply = <&vph_pwr>;
465 vdd_s5-supply = <&vph_pwr>;
466 vdd_s6-supply = <&vph_pwr>;
467 vdd_s7-supply = <&vph_pwr>;
468 vdd_s8-supply = <&vph_pwr>;
469 vdd_s9-supply = <&vph_pwr>;
470 vdd_s10-supply = <&vph_pwr>;
471 vdd_s11-supply = <&vph_pwr>;
472 vdd_s12-supply = <&vph_pwr>;
473 vdd_s13-supply = <&vph_pwr>;
474 vdd_l1_l27-supply = <&vreg_s7a_1p025>;
475 vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
476 vdd_l3_l11-supply = <&vreg_s7a_1p025>;
477 vdd_l4_l5-supply = <&vreg_s7a_1p025>;
478 vdd_l6-supply = <&vreg_s5a_2p04>;
479 vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
480 vdd_l9-supply = <&vreg_bob>;
481 vdd_l10_l23_l25-supply = <&vreg_bob>;
482 vdd_l13_l19_l21-supply = <&vreg_bob>;
483 vdd_l16_l28-supply = <&vreg_bob>;
484 vdd_l18_l22-supply = <&vreg_bob>;
485 vdd_l20_l24-supply = <&vreg_bob>;
486 vdd_l26-supply = <&vreg_s3a_1p35>;
487 vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
488
489 vreg_s3a_1p35: s3 {
490 regulator-min-microvolt = <1352000>;
491 regulator-max-microvolt = <1352000>;
492 };
493
494 vreg_s4a_1p8: s4 {
495 regulator-min-microvolt = <1800000>;
496 regulator-max-microvolt = <1800000>;
497 regulator-system-load = <100000>;
498 regulator-allow-set-load;
499 };
500
501 vreg_s5a_2p04: s5 {
502 regulator-min-microvolt = <1904000>;
503 regulator-max-microvolt = <2032000>;
504 };
505
506 vreg_s7a_1p025: s7 {
507 regulator-min-microvolt = <900000>;
508 regulator-max-microvolt = <1028000>;
509 };
510
511 vreg_l1a_0p875: l1 {
512 regulator-min-microvolt = <880000>;
513 regulator-max-microvolt = <880000>;
514 regulator-system-load = <73400>;
515 regulator-allow-set-load;
516 };
517
518 vreg_l2a_1p2: l2 {
519 regulator-min-microvolt = <1200000>;
520 regulator-max-microvolt = <1200000>;
521 regulator-system-load = <12560>;
522 regulator-allow-set-load;
523 };
524
525 vreg_l3a_1p0: l3 {
526 regulator-min-microvolt = <1000000>;
527 regulator-max-microvolt = <1000000>;
528 };
529
530 vreg_l5a_0p8: l5 {
531 regulator-min-microvolt = <800000>;
532 regulator-max-microvolt = <800000>;
533 };
534
535 vreg_l6a_1p8: l6 {
536 regulator-min-microvolt = <1800000>;
537 regulator-max-microvolt = <1800000>;
538 };
539
540 vreg_l7a_1p8: l7 {
541 regulator-min-microvolt = <1800000>;
542 regulator-max-microvolt = <1800000>;
543 };
544
545 vreg_l8a_1p2: l8 {
546 regulator-min-microvolt = <1200000>;
547 regulator-max-microvolt = <1200000>;
548 };
549
550 vreg_l9a_1p8: l9 {
551 regulator-min-microvolt = <1808000>;
552 regulator-max-microvolt = <2960000>;
553 };
554
555 vreg_l10a_1p8: l10 {
556 regulator-min-microvolt = <1808000>;
557 regulator-max-microvolt = <2960000>;
558 };
559
560 vreg_l11a_1p0: l11 {
561 regulator-min-microvolt = <1000000>;
562 regulator-max-microvolt = <1000000>;
563 };
564
565 vreg_l12a_1p8: l12 {
566 regulator-min-microvolt = <1800000>;
567 regulator-max-microvolt = <1800000>;
568 };
569
570 vreg_l13a_2p95: l13 {
571 regulator-min-microvolt = <1808000>;
572 regulator-max-microvolt = <2960000>;
573 regulator-allow-set-load;
574 };
575
576 vreg_l14a_1p85: l14 {
577 regulator-min-microvolt = <1848000>;
578 regulator-max-microvolt = <1856000>;
579 regulator-system-load = <32000>;
580 regulator-allow-set-load;
581 };
582
583 vreg_l15a_1p8: l15 {
584 regulator-min-microvolt = <1800000>;
585 regulator-max-microvolt = <1800000>;
586 };
587
588 vreg_l16a_2p7: l16 {
589 regulator-min-microvolt = <2704000>;
590 regulator-max-microvolt = <2704000>;
591 };
592
593 vreg_l17a_1p3: l17 {
594 regulator-min-microvolt = <1304000>;
595 regulator-max-microvolt = <1304000>;
596 };
597
598 vreg_l18a_2p85: l18 { };
599
600 vreg_l19a_2p7: l19 {
601 regulator-min-microvolt = <2696000>;
602 regulator-max-microvolt = <2704000>;
603 };
604
605 vreg_l20a_2p95: l20 {
606 regulator-min-microvolt = <2960000>;
607 regulator-max-microvolt = <2960000>;
608 regulator-system-load = <10000>;
609 regulator-allow-set-load;
610 };
611
612 vreg_l21a_2p95: l21 {
613 regulator-min-microvolt = <2960000>;
614 regulator-max-microvolt = <2960000>;
615 regulator-system-load = <800000>;
616 regulator-allow-set-load;
617 };
618
619 vreg_l22a_2p85: l22 { };
620
621 vreg_l23a_3p3: l23 {
622 regulator-min-microvolt = <3312000>;
623 regulator-max-microvolt = <3312000>;
624 };
625
626 vreg_l24a_3p075: l24 {
627 regulator-min-microvolt = <3088000>;
628 regulator-max-microvolt = <3088000>;
629 };
630
631 vreg_l25a_3p3: l25 {
632 regulator-min-microvolt = <3104000>;
633 regulator-max-microvolt = <3312000>;
634 };
635
636 vreg_l26a_1p2: l26 {
637 regulator-min-microvolt = <1200000>;
638 regulator-max-microvolt = <1200000>;
639 regulator-allow-set-load;
640 };
641
642 vreg_l28_3p0: l28 {
643 regulator-min-microvolt = <3000000>;
644 regulator-max-microvolt = <3000000>;
645 };
646
647 vreg_lvs1a_1p8: lvs1 { };
648
649 vreg_lvs2a_1p8: lvs2 { };
650 };
651
652 regulators-1 {
653 compatible = "qcom,rpm-pmi8998-regulators";
654
655 vdd_bob-supply = <&vph_pwr>;
656
657 vreg_bob: bob {
658 regulator-min-microvolt = <3312000>;
659 regulator-max-microvolt = <3600000>;
660 };
661 };
662 };
663
664 &sdhc2 {
665 status = "okay";
666 cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
667
668 vmmc-supply = <&vreg_l21a_2p95>;
669 vqmmc-supply = <&vreg_l13a_2p95>;
670
671 pinctrl-names = "default", "sleep";
672 pinctrl-0 = <&sdc2_on &sdc2_cd>;
673 pinctrl-1 = <&sdc2_off &sdc2_cd>;
674 };
675
676 &tlmm {
677 gpio-reserved-ranges = <0 4>, <81 4>;
678 gpio-line-names = "", /* GPIO_0 */
679 "",
680 "",
681 "",
682 "DEBUG_UART_TX",
683 "DEBUG_UART_RX",
684 "CAMSENSOR_I2C_SDA",
685 "CAMSENSOR_I2C_SCL",
686 "NC",
687 "NC",
688 "MDP_VSYNC_P", /* GPIO_10 */
689 "RGBC_IR_INT",
690 "NFC_VEN",
691 "CAM_MCLK0",
692 "CAM_MCLK1",
693 "NC",
694 "NC",
695 "CCI_I2C_SDA0",
696 "CCI_I2C_SCL0",
697 "CCI_I2C_SDA1",
698 "CCI_I2C_SCL1", /* GPIO_20 */
699 "MAIN_CAM_PWR_EN",
700 "TOF_INT_N",
701 "NC",
702 "NC",
703 "CHAT_CAM_PWR_EN",
704 "NC",
705 "TOF_RESET_N",
706 "CAM2_RSTN",
707 "NC",
708 "CAM1_RSTN", /* GPIO_30 */
709 "NC",
710 "NC",
711 "NC",
712 "NC",
713 "NC",
714 "NC",
715 "NC",
716 "CC_DIR",
717 "UIM2_DETECT_EN",
718 "FP_RESET_N", /* GPIO_40 */
719 "NC",
720 "NC",
721 "NC",
722 "NC",
723 "BT_HCI_UART_TXD",
724 "BT_HCI_UART_RXD",
725 "BT_HCI_UART_CTS_N",
726 "BT_HCI_UART_RFR_N",
727 "NC",
728 "NC", /* GPIO_50 */
729 "NC",
730 "NC",
731 "CODEC_INT2_N",
732 "CODEC_INT1_N",
733 "APPS_I2C_SDA",
734 "APPS_I2C_SCL",
735 "FORCED_USB_BOOT",
736 "NC",
737 "NC",
738 "NC", /* GPIO_60 */
739 "NC",
740 "NC",
741 "TRAY2_DET_DS",
742 "CODEC_RST_N",
743 "WSA_L_EN",
744 "WSA_R_EN",
745 "NC",
746 "NC",
747 "NC",
748 "LPASS_SLIMBUS_CLK", /* GPIO_70 */
749 "LPASS_SLIMBUS_DATA0",
750 "LPASS_SLIMBUS_DATA1",
751 "BT_FM_SLIMBUS_DATA",
752 "BT_FM_SLIMBUS_CLK",
753 "NC",
754 "RF_LCD_ID_EN",
755 "NC",
756 "NC",
757 "NC",
758 "NC", /* GPIO_80 */
759 "SW_SERVICE",
760 "TX_GTR_THRES_IN",
761 "HW_ID0",
762 "HW_ID1",
763 "NC",
764 "NC",
765 "TS_I2C_SDA",
766 "TS_I2C_SCL",
767 "TS_RESET_N",
768 "NC", /* GPIO_90 */
769 "NC",
770 "NFC_IRQ",
771 "NFC_DWLD_EN",
772 "DISP_RESET_N",
773 "TRAY2_DET",
774 "CAM_SOF",
775 "RFFE6_CLK",
776 "RFFE6_DATA",
777 "DEBUG_GPIO0",
778 "DEBUG_GPIO1", /* GPIO_100 */
779 "GRFC4",
780 "NC",
781 "NC",
782 "RSVD",
783 "UIM2_DATA",
784 "UIM2_CLK",
785 "UIM2_RESET",
786 "UIM2_PRESENT",
787 "UIM1_DATA",
788 "UIM1_CLK", /* GPIO_110 */
789 "UIM1_RST",
790 "UIM1_PRESENT",
791 "UIM_BATT_ALARM",
792 "RSVD",
793 "NC",
794 "NC",
795 "ACCEL_INT",
796 "GYRO_INT",
797 "COMPASS_INT",
798 "ALS_PROX_INT_N", /* GPIO_120 */
799 "FP_INT_N",
800 "NC",
801 "BAROMETER_INT",
802 "ACC_COVER_OPEN",
803 "TS_INT_N",
804 "NC",
805 "NC",
806 "USB_DETECT_EN",
807 "NC",
808 "QLINK_REQUEST", /* GPIO_130 */
809 "QLINK_ENABLE",
810 "NC",
811 "NC",
812 "WMSS_RESET_N",
813 "PA_INDICATOR_OR",
814 "NC",
815 "RFFE3_DATA",
816 "RFFE3_CLK",
817 "RFFE4_DATA",
818 "RFFE4_CLK", /* GPIO_140 */
819 "RFFE5_DATA",
820 "RFFE5_CLK",
821 "GNSS_EN",
822 "MSS_LTE_COXM_TXD",
823 "MSS_LTE_COXM_RXD",
824 "RFFE2_DATA",
825 "RFFE2_CLK",
826 "RFFE1_DATA",
827 "RFFE1_CLK";
828
829 mdp_vsync_p: mdp-vsync-p-state {
830 pins = "gpio10";
831 function = "mdp_vsync_a";
832 drive-strength = <2>;
833 bias-pull-down;
834 };
835
836 nfc_ven: nfc-ven-state {
837 pins = "gpio12";
838 function = "gpio";
839 bias-disable;
840 drive-strength = <2>;
841 output-low;
842 };
843
844 cam_mclk0_active: cam-mclk0-active-state {
845 pins = "gpio13";
846 function = "cam_mclk";
847 drive-strength = <2>;
848 bias-disable;
849 };
850
851 cam_mclk1_active: cam-mclk1-active-state {
852 pins = "gpio14";
853 function = "cam_mclk";
854 drive-strength = <2>;
855 bias-disable;
856 };
857
858 cci0_default: cci0-default-state {
859 pins = "gpio18", "gpio19";
860 function = "cci_i2c";
861 bias-disable;
862 drive-strength = <2>;
863 };
864
865 cci1_default: cci1-default-state {
866 pins = "gpio19", "gpio20";
867 function = "cci_i2c";
868 bias-disable;
869 drive-strength = <2>;
870 };
871
872 main_cam_pwr_en: main-cam-pwr-en-default-state {
873 pins = "gpio21";
874 function = "gpio";
875 bias-disable;
876 drive-strength = <2>;
877 };
878
879 tof_int_n: tof-int-n-state {
880 pins = "gpio22";
881 function = "gpio";
882 bias-pull-up;
883 drive-strength = <2>;
884 };
885
886 chat_cam_pwr_en: chat-cam-pwr-en-default-state {
887 pins = "gpio25";
888 function = "gpio";
889 bias-disable;
890 drive-strength = <2>;
891 };
892
893 tof_reset: tof-reset-state {
894 pins = "gpio27";
895 function = "gpio";
896 bias-disable;
897 drive-strength = <2>;
898 };
899
900 cc_dir_default: cc-dir-active-state {
901 pins = "gpio38";
902 function = "gpio";
903 bias-disable;
904 drive-strength = <16>;
905 };
906
907 acc_cover_open: acc-cover-open-state {
908 pins = "gpio124";
909 function = "gpio";
910 bias-disable;
911 drive-strength = <2>;
912 };
913
914 ts_int_n: ts-int-n-state {
915 pins = "gpio125";
916 function = "gpio";
917 drive-strength = <8>;
918 bias-pull-up;
919 };
920
921 usb_detect_en: usb-detect-en-active-state {
922 pins = "gpio128";
923 function = "gpio";
924 bias-disable;
925 drive-strength = <2>;
926 output-low;
927 };
928
929 ts_vddio_en: ts-vddio-en-default-state {
930 pins = "gpio133";
931 function = "gpio";
932 bias-disable;
933 drive-strength = <2>;
934 output-low;
935 };
936 };
937
938 /*
939 * WARNING:
940 * Disable UFS until card quirks are in to avoid unrecoverable hard-brick
941 * that would happen as soon as the UFS card gets probed as, without the
942 * required quirks, the bootloader will be erased right after card probe.
943 */
944 &ufshc {
945 status = "disabled";
946 };
947
948 &ufsphy {
949 status = "disabled";
950 };
951
952 &usb3 {
953 status = "okay";
954 };
955
956 &usb3_dwc3 {
957 /* Force to peripheral until we have Type-C hooked up */
958 dr_mode = "peripheral";
959 extcon = <&extcon_usb>;
960 };
961
962 &usb3phy {
963 status = "okay";
964
965 vdda-phy-supply = <&vreg_l1a_0p875>;
966 vdda-pll-supply = <&vreg_l2a_1p2>;
967 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.