1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2021, The Linux Foundation. All rights reserved.
4 * Copyright (c) 2022, Linaro Limited
5 */
6
7 /dts-v1/;
8
9 #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/input/gpio-keys.h>
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/leds/common.h>
14 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
15
16 #include "sc8280xp.dtsi"
17 #include "sc8280xp-pmics.dtsi"
18
19 / {
20 model = "Lenovo ThinkPad X13s";
21 compatible = "lenovo,thinkpad-x13s", "qcom,sc8280xp";
22
23 aliases {
24 i2c4 = &i2c4;
25 i2c21 = &i2c21;
26 serial1 = &uart2;
27 };
28
29 wcd938x: audio-codec {
30 compatible = "qcom,wcd9380-codec";
31
32 pinctrl-names = "default";
33 pinctrl-0 = <&wcd_default>;
34
35 reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
36
37 vdd-buck-supply = <&vreg_s10b>;
38 vdd-rxtx-supply = <&vreg_s10b>;
39 vdd-io-supply = <&vreg_s10b>;
40 vdd-mic-bias-supply = <&vreg_bob>;
41
42 qcom,micbias1-microvolt = <1800000>;
43 qcom,micbias2-microvolt = <1800000>;
44 qcom,micbias3-microvolt = <1800000>;
45 qcom,micbias4-microvolt = <1800000>;
46 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
47 qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
48 qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
49 qcom,rx-device = <&wcd_rx>;
50 qcom,tx-device = <&wcd_tx>;
51
52 #sound-dai-cells = <1>;
53 };
54
55 backlight: backlight {
56 compatible = "pwm-backlight";
57 pwms = <&pmc8280c_lpg 3 1000000>;
58 enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>;
59 power-supply = <&vreg_edp_bl>;
60
61 pinctrl-names = "default";
62 pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
63 };
64
65 gpio-keys {
66 compatible = "gpio-keys";
67
68 pinctrl-names = "default";
69 pinctrl-0 = <&hall_int_n_default>;
70
71 switch-lid {
72 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
73 linux,input-type = <EV_SW>;
74 linux,code = <SW_LID>;
75 wakeup-source;
76 wakeup-event-action = <EV_ACT_DEASSERTED>;
77 };
78 };
79
80 leds {
81 compatible = "gpio-leds";
82
83 pinctrl-names = "default";
84 pinctrl-0 = <&cam_indicator_en>;
85
86 led-camera-indicator {
87 label = "white:camera-indicator";
88 function = LED_FUNCTION_INDICATOR;
89 color = <LED_COLOR_ID_WHITE>;
90 gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
91 linux,default-trigger = "none";
92 default-state = "off";
93 /* Reuse as a panic indicator until we get a "camera on" trigger */
94 panic-indicator;
95 };
96 };
97
98 pmic-glink {
99 compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
100
101 #address-cells = <1>;
102 #size-cells = <0>;
103 orientation-gpios = <&tlmm 166 GPIO_ACTIVE_HIGH>,
104 <&tlmm 49 GPIO_ACTIVE_HIGH>;
105
106 connector@0 {
107 compatible = "usb-c-connector";
108 reg = <0>;
109 power-role = "dual";
110 data-role = "dual";
111
112 ports {
113 #address-cells = <1>;
114 #size-cells = <0>;
115
116 port@0 {
117 reg = <0>;
118
119 pmic_glink_con0_hs: endpoint {
120 remote-endpoint = <&usb_0_dwc3_hs>;
121 };
122 };
123
124 port@1 {
125 reg = <1>;
126
127 pmic_glink_con0_ss: endpoint {
128 remote-endpoint = <&usb_0_qmpphy_out>;
129 };
130 };
131
132 port@2 {
133 reg = <2>;
134
135 pmic_glink_con0_sbu: endpoint {
136 remote-endpoint = <&usb0_sbu_mux>;
137 };
138 };
139 };
140 };
141
142 connector@1 {
143 compatible = "usb-c-connector";
144 reg = <1>;
145 power-role = "dual";
146 data-role = "dual";
147
148 ports {
149 #address-cells = <1>;
150 #size-cells = <0>;
151 port@0 {
152 reg = <0>;
153
154 pmic_glink_con1_hs: endpoint {
155 remote-endpoint = <&usb_1_dwc3_hs>;
156 };
157 };
158
159 port@1 {
160 reg = <1>;
161
162 pmic_glink_con1_ss: endpoint {
163 remote-endpoint = <&usb_1_qmpphy_out>;
164 };
165 };
166
167 port@2 {
168 reg = <2>;
169
170 pmic_glink_con1_sbu: endpoint {
171 remote-endpoint = <&usb1_sbu_mux>;
172 };
173 };
174 };
175 };
176 };
177
178 vreg_edp_3p3: regulator-edp-3p3 {
179 compatible = "regulator-fixed";
180
181 regulator-name = "VCC3LCD";
182 regulator-min-microvolt = <3300000>;
183 regulator-max-microvolt = <3300000>;
184
185 gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
186 enable-active-high;
187
188 pinctrl-names = "default";
189 pinctrl-0 = <&edp_reg_en>;
190
191 regulator-boot-on;
192 };
193
194 vreg_edp_bl: regulator-edp-bl {
195 compatible = "regulator-fixed";
196
197 regulator-name = "VBL9";
198 regulator-min-microvolt = <3600000>;
199 regulator-max-microvolt = <3600000>;
200
201 gpio = <&pmc8280_1_gpios 9 GPIO_ACTIVE_HIGH>;
202 enable-active-high;
203
204 pinctrl-names = "default";
205 pinctrl-0 = <&edp_bl_reg_en>;
206
207 regulator-boot-on;
208 };
209
210 vreg_misc_3p3: regulator-misc-3p3 {
211 compatible = "regulator-fixed";
212
213 regulator-name = "VCC3B";
214 regulator-min-microvolt = <3300000>;
215 regulator-max-microvolt = <3300000>;
216
217 gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>;
218 enable-active-high;
219
220 pinctrl-names = "default";
221 pinctrl-0 = <&misc_3p3_reg_en>;
222
223 regulator-boot-on;
224 regulator-always-on;
225 };
226
227 vreg_nvme: regulator-nvme {
228 compatible = "regulator-fixed";
229
230 regulator-name = "VCC3_SSD";
231 regulator-min-microvolt = <3300000>;
232 regulator-max-microvolt = <3300000>;
233
234 gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>;
235 enable-active-high;
236
237 pinctrl-names = "default";
238 pinctrl-0 = <&nvme_reg_en>;
239
240 regulator-boot-on;
241 };
242
243 vreg_vph_pwr: regulator-vph-pwr {
244 compatible = "regulator-fixed";
245
246 regulator-name = "VPH_VCC3R9";
247 regulator-min-microvolt = <3900000>;
248 regulator-max-microvolt = <3900000>;
249
250 regulator-always-on;
251 };
252
253 vreg_wlan: regulator-wlan {
254 compatible = "regulator-fixed";
255
256 regulator-name = "VCC_WLAN_3R9";
257 regulator-min-microvolt = <3900000>;
258 regulator-max-microvolt = <3900000>;
259
260 gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>;
261 enable-active-high;
262
263 pinctrl-names = "default";
264 pinctrl-0 = <&hastings_reg_en>;
265
266 regulator-boot-on;
267 };
268
269 vreg_wwan: regulator-wwan {
270 compatible = "regulator-fixed";
271
272 regulator-name = "VCC3B_WAN";
273 regulator-min-microvolt = <3300000>;
274 regulator-max-microvolt = <3300000>;
275
276 gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>;
277 enable-active-high;
278
279 pinctrl-names = "default";
280 pinctrl-0 = <&wwan_sw_en>;
281
282 regulator-boot-on;
283 };
284
285 reserved-memory {
286 gpu_mem: gpu-mem@8bf00000 {
287 reg = <0 0x8bf00000 0 0x2000>;
288 no-map;
289 };
290
291 linux,cma {
292 compatible = "shared-dma-pool";
293 size = <0x0 0x8000000>;
294 reusable;
295 linux,cma-default;
296 };
297 };
298
299 thermal-zones {
300 pm8008-thermal {
301 polling-delay-passive = <100>;
302 polling-delay = <0>;
303
304 thermal-sensors = <&pm8008>;
305
306 trips {
307 trip0 {
308 temperature = <95000>;
309 hysteresis = <0>;
310 type = "passive";
311 };
312
313 trip1 {
314 temperature = <115000>;
315 hysteresis = <0>;
316 type = "critical";
317 };
318 };
319 };
320
321 skin-temp-thermal {
322 polling-delay-passive = <250>;
323
324 thermal-sensors = <&pmk8280_adc_tm 5>;
325
326 trips {
327 skin_temp_alert0: trip-point0 {
328 temperature = <55000>;
329 hysteresis = <1000>;
330 type = "passive";
331 };
332
333 skin_temp_alert1: trip-point1 {
334 temperature = <58000>;
335 hysteresis = <1000>;
336 type = "passive";
337 };
338
339 skin-temp-crit {
340 temperature = <73000>;
341 hysteresis = <1000>;
342 type = "critical";
343 };
344 };
345
346 cooling-maps {
347 map0 {
348 trip = <&skin_temp_alert0>;
349 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
350 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
351 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
352 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
353 };
354
355 map1 {
356 trip = <&skin_temp_alert1>;
357 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
358 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
359 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
360 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
361 };
362 };
363 };
364 };
365
366 usb0-sbu-mux {
367 compatible = "pericom,pi3usb102", "gpio-sbu-mux";
368
369 enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
370 select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
371
372 pinctrl-names = "default";
373 pinctrl-0 = <&usb0_sbu_default>;
374
375 mode-switch;
376 orientation-switch;
377
378 port {
379 usb0_sbu_mux: endpoint {
380 remote-endpoint = <&pmic_glink_con0_sbu>;
381 };
382 };
383 };
384
385 usb1-sbu-mux {
386 compatible = "pericom,pi3usb102", "gpio-sbu-mux";
387
388 enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
389 select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
390
391 pinctrl-names = "default";
392 pinctrl-0 = <&usb1_sbu_default>;
393
394 mode-switch;
395 orientation-switch;
396
397 port {
398 usb1_sbu_mux: endpoint {
399 remote-endpoint = <&pmic_glink_con1_sbu>;
400 };
401 };
402 };
403 };
404
405 &apps_rsc {
406 regulators-0 {
407 compatible = "qcom,pm8350-rpmh-regulators";
408 qcom,pmic-id = "b";
409
410 vdd-l1-l4-supply = <&vreg_s12b>;
411 vdd-l2-l7-supply = <&vreg_bob>;
412 vdd-l3-l5-supply = <&vreg_s11b>;
413 vdd-l6-l9-l10-supply = <&vreg_s12b>;
414 vdd-l8-supply = <&vreg_s12b>;
415
416 vreg_s10b: smps10 {
417 regulator-name = "vreg_s10b";
418 regulator-min-microvolt = <1800000>;
419 regulator-max-microvolt = <1800000>;
420 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
421 regulator-always-on;
422 };
423
424 vreg_s11b: smps11 {
425 regulator-name = "vreg_s11b";
426 regulator-min-microvolt = <1272000>;
427 regulator-max-microvolt = <1272000>;
428 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
429 regulator-always-on;
430 };
431
432 vreg_s12b: smps12 {
433 regulator-name = "vreg_s12b";
434 regulator-min-microvolt = <984000>;
435 regulator-max-microvolt = <984000>;
436 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
437 regulator-always-on;
438 };
439
440 vreg_l1b: ldo1 {
441 regulator-name = "vreg_l1b";
442 regulator-min-microvolt = <912000>;
443 regulator-max-microvolt = <912000>;
444 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
445 };
446
447 vreg_l3b: ldo3 {
448 regulator-name = "vreg_l3b";
449 regulator-min-microvolt = <1200000>;
450 regulator-max-microvolt = <1200000>;
451 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
452 regulator-boot-on;
453 };
454
455 vreg_l4b: ldo4 {
456 regulator-name = "vreg_l4b";
457 regulator-min-microvolt = <912000>;
458 regulator-max-microvolt = <912000>;
459 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
460 };
461
462 vreg_l6b: ldo6 {
463 regulator-name = "vreg_l6b";
464 regulator-min-microvolt = <880000>;
465 regulator-max-microvolt = <880000>;
466 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
467 regulator-boot-on;
468 };
469 };
470
471 regulators-1 {
472 compatible = "qcom,pm8350c-rpmh-regulators";
473 qcom,pmic-id = "c";
474
475 vdd-bob-supply = <&vreg_vph_pwr>;
476 vdd-l1-l12-supply = <&vreg_s1c>;
477 vdd-l2-l8-supply = <&vreg_s1c>;
478 vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
479 vdd-l6-l9-l11-supply = <&vreg_bob>;
480 vdd-l10-supply = <&vreg_s11b>;
481
482 vreg_s1c: smps1 {
483 regulator-name = "vreg_s1c";
484 regulator-min-microvolt = <1880000>;
485 regulator-max-microvolt = <1900000>;
486 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
487 regulator-always-on;
488 };
489
490 vreg_l1c: ldo1 {
491 regulator-name = "vreg_l1c";
492 regulator-min-microvolt = <1800000>;
493 regulator-max-microvolt = <1800000>;
494 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
495 };
496
497 vreg_l8c: ldo8 {
498 regulator-name = "vreg_l8c";
499 regulator-min-microvolt = <1800000>;
500 regulator-max-microvolt = <1800000>;
501 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
502 };
503
504 vreg_l12c: ldo12 {
505 regulator-name = "vreg_l12c";
506 regulator-min-microvolt = <1800000>;
507 regulator-max-microvolt = <1800000>;
508 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
509 };
510
511 vreg_l13c: ldo13 {
512 regulator-name = "vreg_l13c";
513 regulator-min-microvolt = <3072000>;
514 regulator-max-microvolt = <3072000>;
515 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
516 };
517
518 vreg_bob: bob {
519 regulator-name = "vreg_bob";
520 regulator-min-microvolt = <3008000>;
521 regulator-max-microvolt = <3960000>;
522 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
523 regulator-always-on;
524 };
525 };
526
527 regulators-2 {
528 compatible = "qcom,pm8350-rpmh-regulators";
529 qcom,pmic-id = "d";
530
531 vdd-l1-l4-supply = <&vreg_s11b>;
532 vdd-l2-l7-supply = <&vreg_bob>;
533 vdd-l3-l5-supply = <&vreg_s11b>;
534 vdd-l6-l9-l10-supply = <&vreg_s12b>;
535 vdd-l8-supply = <&vreg_s12b>;
536
537 vreg_l2d: ldo2 {
538 regulator-name = "vreg_l2d";
539 regulator-min-microvolt = <3072000>;
540 regulator-max-microvolt = <3072000>;
541 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
542 };
543
544 vreg_l3d: ldo3 {
545 regulator-name = "vreg_l3d";
546 regulator-min-microvolt = <1200000>;
547 regulator-max-microvolt = <1200000>;
548 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
549 };
550
551 vreg_l4d: ldo4 {
552 regulator-name = "vreg_l4d";
553 regulator-min-microvolt = <1200000>;
554 regulator-max-microvolt = <1200000>;
555 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
556 };
557
558 vreg_l6d: ldo6 {
559 regulator-name = "vreg_l6d";
560 regulator-min-microvolt = <880000>;
561 regulator-max-microvolt = <880000>;
562 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
563 };
564
565 vreg_l7d: ldo7 {
566 regulator-name = "vreg_l7d";
567 regulator-min-microvolt = <3072000>;
568 regulator-max-microvolt = <3072000>;
569 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
570 };
571
572 vreg_l8d: ldo8 {
573 regulator-name = "vreg_l8d";
574 regulator-min-microvolt = <912000>;
575 regulator-max-microvolt = <912000>;
576 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
577 };
578
579 vreg_l9d: ldo9 {
580 regulator-name = "vreg_l9d";
581 regulator-min-microvolt = <912000>;
582 regulator-max-microvolt = <912000>;
583 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
584 };
585
586 vreg_l10d: ldo10 {
587 regulator-name = "vreg_l10d";
588 regulator-min-microvolt = <912000>;
589 regulator-max-microvolt = <912000>;
590 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
591 };
592 };
593 };
594
595 &camss {
596 vdda-phy-supply = <&vreg_l6d>;
597 vdda-pll-supply = <&vreg_l4d>;
598
599 status = "okay";
600
601 ports {
602 port@0 {
603 csiphy0_lanes01_ep: endpoint@0 {
604 reg = <0>;
605 clock-lanes = <7>;
606 data-lanes = <0 1>;
607 remote-endpoint = <&ov5675_ep>;
608 };
609 };
610 };
611 };
612
613 &cci2 {
614 status = "okay";
615 };
616
617 &cci2_i2c1 {
618 camera@10 {
619 compatible = "ovti,ov5675";
620 reg = <0x10>;
621
622 reset-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>;
623 pinctrl-names = "default";
624 pinctrl-0 = <&cam_rgb_default>;
625
626 clocks = <&camcc CAMCC_MCLK3_CLK>;
627
628 orientation = <0>; /* Front facing */
629
630 avdd-supply = <&vreg_l6q>;
631 dvdd-supply = <&vreg_l2q>;
632 dovdd-supply = <&vreg_l7q>;
633
634 port {
635 ov5675_ep: endpoint {
636 clock-lanes = <0>;
637 data-lanes = <1 2>;
638 link-frequencies = /bits/ 64 <450000000>;
639 remote-endpoint = <&csiphy0_lanes01_ep>;
640 };
641 };
642
643 };
644 };
645
646 &dispcc0 {
647 status = "okay";
648 };
649
650 &gpu {
651 status = "okay";
652
653 zap-shader {
654 memory-region = <&gpu_mem>;
655 firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcdxkmsuc8280.mbn";
656 };
657 };
658
659 &mdss0 {
660 status = "okay";
661 };
662
663 &mdss0_dp0 {
664 status = "okay";
665 };
666
667 &mdss0_dp0_out {
668 data-lanes = <0 1>;
669 remote-endpoint = <&usb_0_qmpphy_dp_in>;
670 };
671
672 &mdss0_dp1 {
673 status = "okay";
674 };
675
676 &mdss0_dp1_out {
677 data-lanes = <0 1>;
678 remote-endpoint = <&usb_1_qmpphy_dp_in>;
679 };
680
681 &mdss0_dp3 {
682 compatible = "qcom,sc8280xp-edp";
683 /delete-property/ #sound-dai-cells;
684
685 data-lanes = <0 1 2 3>;
686
687 status = "okay";
688
689 aux-bus {
690 panel {
691 compatible = "edp-panel";
692
693 backlight = <&backlight>;
694 power-supply = <&vreg_edp_3p3>;
695
696 port {
697 edp_panel_in: endpoint {
698 remote-endpoint = <&mdss0_dp3_out>;
699 };
700 };
701 };
702 };
703
704 ports {
705 port@1 {
706 reg = <1>;
707 mdss0_dp3_out: endpoint {
708 remote-endpoint = <&edp_panel_in>;
709 };
710 };
711 };
712 };
713
714 &mdss0_dp3_phy {
715 compatible = "qcom,sc8280xp-edp-phy";
716 vdda-phy-supply = <&vreg_l6b>;
717 vdda-pll-supply = <&vreg_l3b>;
718
719 status = "okay";
720 };
721
722 &i2c4 {
723 clock-frequency = <400000>;
724
725 pinctrl-names = "default";
726 pinctrl-0 = <&i2c4_default>;
727
728 status = "okay";
729
730 touchscreen@10 {
731 compatible = "elan,ekth5015m", "elan,ekth6915";
732 reg = <0x10>;
733
734 interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
735 reset-gpios = <&tlmm 99 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
736 no-reset-on-power-off;
737
738 vcc33-supply = <&vreg_misc_3p3>;
739 vccio-supply = <&vreg_misc_3p3>;
740
741 pinctrl-names = "default";
742 pinctrl-0 = <&ts0_default>;
743 };
744 };
745
746 &i2c11 {
747 clock-frequency = <400000>;
748
749 pinctrl-names = "default";
750 pinctrl-0 = <&i2c11_default>;
751
752 status = "okay";
753
754 pm8008: pmic@c {
755 compatible = "qcom,pm8008";
756 reg = <0xc>;
757
758 interrupts-extended = <&tlmm 41 IRQ_TYPE_EDGE_RISING>;
759 reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
760
761 vdd-l1-l2-supply = <&vreg_s11b>;
762 vdd-l3-l4-supply = <&vreg_bob>;
763 vdd-l5-supply = <&vreg_bob>;
764 vdd-l6-supply = <&vreg_bob>;
765 vdd-l7-supply = <&vreg_bob>;
766
767 pinctrl-names = "default";
768 pinctrl-0 = <&pm8008_default>;
769
770 gpio-controller;
771 #gpio-cells = <2>;
772 gpio-ranges = <&pm8008 0 0 2>;
773
774 interrupt-controller;
775 #interrupt-cells = <2>;
776
777 #thermal-sensor-cells = <0>;
778
779 regulators {
780 vreg_l1q: ldo1 {
781 regulator-name = "vreg_l1q";
782 regulator-min-microvolt = <1200000>;
783 regulator-max-microvolt = <1200000>;
784 };
785
786 vreg_l2q: ldo2 {
787 regulator-name = "vreg_l2q";
788 regulator-min-microvolt = <1200000>;
789 regulator-max-microvolt = <1200000>;
790 };
791
792 vreg_l3q: ldo3 {
793 regulator-name = "vreg_l3q";
794 regulator-min-microvolt = <2800000>;
795 regulator-max-microvolt = <2800000>;
796 };
797
798 vreg_l4q: ldo4 {
799 regulator-name = "vreg_l4q";
800 regulator-min-microvolt = <2800000>;
801 regulator-max-microvolt = <2800000>;
802 };
803
804 vreg_l5q: ldo5 {
805 regulator-name = "vreg_l5q";
806 regulator-min-microvolt = <1800000>;
807 regulator-max-microvolt = <1800000>;
808 };
809
810 vreg_l6q: ldo6 {
811 regulator-name = "vreg_l6q";
812 regulator-min-microvolt = <1800000>;
813 regulator-max-microvolt = <1800000>;
814 };
815
816 vreg_l7q: ldo7 {
817 regulator-name = "vreg_l7q";
818 regulator-min-microvolt = <2800000>;
819 regulator-max-microvolt = <2800000>;
820 };
821 };
822 };
823 };
824
825 &i2c21 {
826 clock-frequency = <400000>;
827
828 pinctrl-names = "default";
829 pinctrl-0 = <&i2c21_default>, <&tpad_default>;
830
831 status = "okay";
832
833 touchpad@15 {
834 compatible = "hid-over-i2c";
835 reg = <0x15>;
836
837 hid-descr-addr = <0x1>;
838 interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
839 vdd-supply = <&vreg_misc_3p3>;
840 vddl-supply = <&vreg_s10b>;
841
842 wakeup-source;
843 };
844
845 touchpad@2c {
846 compatible = "hid-over-i2c";
847 reg = <0x2c>;
848
849 hid-descr-addr = <0x20>;
850 interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
851 vdd-supply = <&vreg_misc_3p3>;
852 vddl-supply = <&vreg_s10b>;
853
854 wakeup-source;
855 };
856
857 keyboard@68 {
858 compatible = "hid-over-i2c";
859 reg = <0x68>;
860
861 hid-descr-addr = <0x1>;
862 interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
863 vdd-supply = <&vreg_misc_3p3>;
864 vddl-supply = <&vreg_s10b>;
865
866 pinctrl-names = "default";
867 pinctrl-0 = <&kybd_default>;
868
869 wakeup-source;
870 };
871 };
872
873 &pcie2a {
874 perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
875 wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
876
877 vddpe-3v3-supply = <&vreg_nvme>;
878
879 pinctrl-names = "default";
880 pinctrl-0 = <&pcie2a_default>;
881
882 status = "okay";
883 };
884
885 &pcie2a_phy {
886 vdda-phy-supply = <&vreg_l6d>;
887 vdda-pll-supply = <&vreg_l4d>;
888
889 status = "okay";
890 };
891
892 &pcie3a {
893 perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
894 wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
895
896 vddpe-3v3-supply = <&vreg_wwan>;
897
898 pinctrl-names = "default";
899 pinctrl-0 = <&pcie3a_default>;
900
901 status = "okay";
902 };
903
904 &pcie3a_phy {
905 vdda-phy-supply = <&vreg_l6d>;
906 vdda-pll-supply = <&vreg_l4d>;
907
908 status = "okay";
909 };
910
911 &pcie4 {
912 max-link-speed = <2>;
913
914 perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
915 wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
916
917 vddpe-3v3-supply = <&vreg_wlan>;
918
919 pinctrl-names = "default";
920 pinctrl-0 = <&pcie4_default>;
921
922 status = "okay";
923 };
924
925 &pcie4_port0 {
926 wifi@0 {
927 compatible = "pci17cb,1103";
928 reg = <0x10000 0x0 0x0 0x0 0x0>;
929
930 qcom,ath11k-calibration-variant = "LE_X13S";
931 };
932 };
933
934 &pcie4_phy {
935 vdda-phy-supply = <&vreg_l6d>;
936 vdda-pll-supply = <&vreg_l4d>;
937
938 status = "okay";
939 };
940
941 &pmc8280c_lpg {
942 status = "okay";
943 };
944
945 &pmk8280_adc_tm {
946 status = "okay";
947
948 sys-therm@0 {
949 reg = <0>;
950 io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
951 qcom,hw-settle-time-us = <200>;
952 qcom,avg-samples = <2>;
953 qcom,ratiometric;
954 };
955
956 sys-therm@1 {
957 reg = <1>;
958 io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
959 qcom,hw-settle-time-us = <200>;
960 qcom,avg-samples = <2>;
961 qcom,ratiometric;
962 };
963
964 sys-therm@2 {
965 reg = <2>;
966 io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
967 qcom,hw-settle-time-us = <200>;
968 qcom,avg-samples = <2>;
969 qcom,ratiometric;
970 };
971
972 sys-therm@3 {
973 reg = <3>;
974 io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
975 qcom,hw-settle-time-us = <200>;
976 qcom,avg-samples = <2>;
977 qcom,ratiometric;
978 };
979
980 sys-therm@4 {
981 reg = <4>;
982 io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
983 qcom,hw-settle-time-us = <200>;
984 qcom,avg-samples = <2>;
985 qcom,ratiometric;
986 };
987
988 sys-therm@5 {
989 reg = <5>;
990 io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
991 qcom,hw-settle-time-us = <200>;
992 qcom,avg-samples = <2>;
993 qcom,ratiometric;
994 };
995
996 sys-therm@6 {
997 reg = <6>;
998 io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
999 qcom,hw-settle-time-us = <200>;
1000 qcom,avg-samples = <2>;
1001 qcom,ratiometric;
1002 };
1003
1004 sys-therm@7 {
1005 reg = <7>;
1006 io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
1007 qcom,hw-settle-time-us = <200>;
1008 qcom,avg-samples = <2>;
1009 qcom,ratiometric;
1010 };
1011 };
1012
1013 &pmk8280_pon_pwrkey {
1014 status = "okay";
1015 };
1016
1017 &pmk8280_pon_resin {
1018 status = "okay";
1019 };
1020
1021 &pmk8280_rtc {
1022 nvmem-cells = <&rtc_offset>;
1023 nvmem-cell-names = "offset";
1024
1025 status = "okay";
1026 };
1027
1028 &pmk8280_sdam_6 {
1029 status = "okay";
1030
1031 rtc_offset: rtc-offset@bc {
1032 reg = <0xbc 0x4>;
1033 };
1034 };
1035
1036 &pmk8280_vadc {
1037 channel@144 {
1038 reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
1039 qcom,hw-settle-time = <200>;
1040 qcom,ratiometric;
1041 label = "sys_therm1";
1042 };
1043
1044 channel@145 {
1045 reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
1046 qcom,hw-settle-time = <200>;
1047 qcom,ratiometric;
1048 label = "sys_therm2";
1049 };
1050
1051 channel@146 {
1052 reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
1053 qcom,hw-settle-time = <200>;
1054 qcom,ratiometric;
1055 label = "sys_therm3";
1056 };
1057
1058 channel@147 {
1059 reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
1060 qcom,hw-settle-time = <200>;
1061 qcom,ratiometric;
1062 label = "sys_therm4";
1063 };
1064
1065 channel@344 {
1066 reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
1067 qcom,hw-settle-time = <200>;
1068 qcom,ratiometric;
1069 label = "sys_therm5";
1070 };
1071
1072 channel@345 {
1073 reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
1074 qcom,hw-settle-time = <200>;
1075 qcom,ratiometric;
1076 label = "sys_therm6";
1077 };
1078
1079 channel@346 {
1080 reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
1081 qcom,hw-settle-time = <200>;
1082 qcom,ratiometric;
1083 label = "sys_therm7";
1084 };
1085
1086 channel@347 {
1087 reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
1088 qcom,hw-settle-time = <200>;
1089 qcom,ratiometric;
1090 label = "sys_therm8";
1091 };
1092 };
1093
1094 &qup0 {
1095 status = "okay";
1096 };
1097
1098 &qup1 {
1099 status = "okay";
1100 };
1101
1102 &qup2 {
1103 status = "okay";
1104 };
1105
1106 &remoteproc_adsp {
1107 firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcadsp8280.mbn";
1108
1109 status = "okay";
1110 };
1111
1112 &remoteproc_nsp0 {
1113 firmware-name = "qcom/sc8280xp/LENOVO/21BX/qccdsp8280.mbn";
1114
1115 status = "okay";
1116 };
1117
1118 &rxmacro {
1119 status = "okay";
1120 };
1121
1122 &sound {
1123 compatible = "qcom,sc8280xp-sndcard";
1124 model = "SC8280XP-LENOVO-X13S";
1125 audio-routing =
1126 "SpkrLeft IN", "WSA_SPK1 OUT",
1127 "SpkrRight IN", "WSA_SPK2 OUT",
1128 "IN1_HPHL", "HPHL_OUT",
1129 "IN2_HPHR", "HPHR_OUT",
1130 "AMIC2", "MIC BIAS2",
1131 "VA DMIC0", "MIC BIAS1",
1132 "VA DMIC1", "MIC BIAS1",
1133 "VA DMIC2", "MIC BIAS3",
1134 "VA DMIC0", "VA MIC BIAS1",
1135 "VA DMIC1", "VA MIC BIAS1",
1136 "VA DMIC2", "VA MIC BIAS3",
1137 "TX SWR_ADC1", "ADC2_OUTPUT";
1138
1139 wcd-playback-dai-link {
1140 link-name = "WCD Playback";
1141 cpu {
1142 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
1143 };
1144
1145 codec {
1146 sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
1147 };
1148
1149 platform {
1150 sound-dai = <&q6apm>;
1151 };
1152 };
1153
1154 wcd-capture-dai-link {
1155 link-name = "WCD Capture";
1156 cpu {
1157 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
1158 };
1159
1160 codec {
1161 sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
1162 };
1163
1164 platform {
1165 sound-dai = <&q6apm>;
1166 };
1167 };
1168
1169 wsa-dai-link {
1170 link-name = "WSA Playback";
1171 cpu {
1172 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
1173 };
1174
1175 codec {
1176 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
1177 };
1178
1179 platform {
1180 sound-dai = <&q6apm>;
1181 };
1182 };
1183
1184 va-dai-link {
1185 link-name = "VA Capture";
1186 cpu {
1187 sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
1188 };
1189
1190 platform {
1191 sound-dai = <&q6apm>;
1192 };
1193
1194 codec {
1195 sound-dai = <&vamacro 0>;
1196 };
1197 };
1198 };
1199
1200 &swr0 {
1201 status = "okay";
1202
1203 left_spkr: wsa8830-left@0,1 {
1204 compatible = "sdw10217020200";
1205 reg = <0 1>;
1206 pinctrl-names = "default";
1207 pinctrl-0 = <&spkr_1_sd_n_default>;
1208 powerdown-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>;
1209 #thermal-sensor-cells = <0>;
1210 sound-name-prefix = "SpkrLeft";
1211 #sound-dai-cells = <0>;
1212 vdd-supply = <&vreg_s10b>;
1213 };
1214
1215 right_spkr: wsa8830-right@0,2 {
1216 compatible = "sdw10217020200";
1217 reg = <0 2>;
1218 pinctrl-names = "default";
1219 pinctrl-0 = <&spkr_2_sd_n_default>;
1220 powerdown-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>;
1221 #thermal-sensor-cells = <0>;
1222 sound-name-prefix = "SpkrRight";
1223 #sound-dai-cells = <0>;
1224 vdd-supply = <&vreg_s10b>;
1225 };
1226 };
1227
1228 &swr1 {
1229 status = "okay";
1230
1231 wcd_rx: wcd9380-rx@0,4 {
1232 compatible = "sdw20217010d00";
1233 reg = <0 4>;
1234 qcom,rx-port-mapping = <1 2 3 4 5>;
1235 };
1236 };
1237
1238 &swr2 {
1239 status = "okay";
1240
1241 wcd_tx: wcd9380-tx@0,3 {
1242 compatible = "sdw20217010d00";
1243 reg = <0 3>;
1244 qcom,tx-port-mapping = <1 1 2 3>;
1245 };
1246 };
1247
1248 &txmacro {
1249 status = "okay";
1250 };
1251
1252 &uart2 {
1253 pinctrl-0 = <&uart2_default>;
1254 pinctrl-names = "default";
1255
1256 status = "okay";
1257
1258 bluetooth {
1259 compatible = "qcom,wcn6855-bt";
1260
1261 vddio-supply = <&vreg_s10b>;
1262 vddbtcxmx-supply = <&vreg_s12b>;
1263 vddrfacmn-supply = <&vreg_s12b>;
1264 vddrfa0p8-supply = <&vreg_s12b>;
1265 vddrfa1p2-supply = <&vreg_s11b>;
1266 vddrfa1p7-supply = <&vreg_s1c>;
1267
1268 max-speed = <3200000>;
1269
1270 enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
1271 swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>;
1272
1273 pinctrl-0 = <&bt_default>;
1274 pinctrl-names = "default";
1275 };
1276 };
1277
1278 &usb_0 {
1279 status = "okay";
1280 };
1281
1282 &usb_0_dwc3 {
1283 dr_mode = "host";
1284 };
1285
1286 &usb_0_dwc3_hs {
1287 remote-endpoint = <&pmic_glink_con0_hs>;
1288 };
1289
1290 &usb_0_hsphy {
1291 vdda-pll-supply = <&vreg_l9d>;
1292 vdda18-supply = <&vreg_l1c>;
1293 vdda33-supply = <&vreg_l7d>;
1294
1295 status = "okay";
1296 };
1297
1298 &usb_0_qmpphy {
1299 vdda-phy-supply = <&vreg_l9d>;
1300 vdda-pll-supply = <&vreg_l4d>;
1301
1302 orientation-switch;
1303
1304 status = "okay";
1305 };
1306
1307 &usb_0_qmpphy_dp_in {
1308 remote-endpoint = <&mdss0_dp0_out>;
1309 };
1310
1311 &usb_0_qmpphy_out {
1312 remote-endpoint = <&pmic_glink_con0_ss>;
1313 };
1314
1315 &usb_1 {
1316 status = "okay";
1317 };
1318
1319 &usb_1_dwc3 {
1320 dr_mode = "host";
1321 };
1322
1323 &usb_1_dwc3_hs {
1324 remote-endpoint = <&pmic_glink_con1_hs>;
1325 };
1326
1327 &usb_1_hsphy {
1328 vdda-pll-supply = <&vreg_l4b>;
1329 vdda18-supply = <&vreg_l1c>;
1330 vdda33-supply = <&vreg_l13c>;
1331
1332 status = "okay";
1333 };
1334
1335 &usb_1_qmpphy {
1336 vdda-phy-supply = <&vreg_l4b>;
1337 vdda-pll-supply = <&vreg_l3b>;
1338
1339 orientation-switch;
1340
1341 status = "okay";
1342 };
1343
1344 &usb_1_qmpphy_dp_in {
1345 remote-endpoint = <&mdss0_dp1_out>;
1346 };
1347
1348 &usb_1_qmpphy_out {
1349 remote-endpoint = <&pmic_glink_con1_ss>;
1350 };
1351
1352 &usb_2 {
1353 status = "okay";
1354 };
1355
1356 &usb_2_hsphy0 {
1357 vdda-pll-supply = <&vreg_l1b>;
1358 vdda18-supply = <&vreg_l1c>;
1359 vdda33-supply = <&vreg_l7d>;
1360
1361 status = "okay";
1362 };
1363
1364 &usb_2_hsphy1 {
1365 vdda-pll-supply = <&vreg_l8d>;
1366 vdda18-supply = <&vreg_l1c>;
1367 vdda33-supply = <&vreg_l7d>;
1368
1369 status = "okay";
1370 };
1371
1372 &usb_2_hsphy2 {
1373 vdda-pll-supply = <&vreg_l10d>;
1374 vdda18-supply = <&vreg_l8c>;
1375 vdda33-supply = <&vreg_l2d>;
1376
1377 status = "okay";
1378 };
1379
1380 &usb_2_hsphy3 {
1381 vdda-pll-supply = <&vreg_l10d>;
1382 vdda18-supply = <&vreg_l8c>;
1383 vdda33-supply = <&vreg_l2d>;
1384
1385 status = "okay";
1386 };
1387
1388 &usb_2_qmpphy0 {
1389 vdda-phy-supply = <&vreg_l1b>;
1390 vdda-pll-supply = <&vreg_l4d>;
1391
1392 status = "okay";
1393 };
1394
1395 &usb_2_qmpphy1 {
1396 vdda-phy-supply = <&vreg_l8d>;
1397 vdda-pll-supply = <&vreg_l4d>;
1398
1399 status = "okay";
1400 };
1401
1402 &vamacro {
1403 pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
1404 pinctrl-names = "default";
1405
1406 vdd-micb-supply = <&vreg_s10b>;
1407
1408 qcom,dmic-sample-rate = <4800000>;
1409
1410 status = "okay";
1411 };
1412
1413 &wsamacro {
1414 status = "okay";
1415 };
1416
1417 &xo_board_clk {
1418 clock-frequency = <38400000>;
1419 };
1420
1421 /* PINCTRL */
1422
1423 &lpass_tlmm {
1424 status = "okay";
1425 };
1426
1427 &pmc8280_1_gpios {
1428 edp_bl_en: edp-bl-en-state {
1429 pins = "gpio8";
1430 function = "normal";
1431 };
1432
1433 edp_bl_reg_en: edp-bl-reg-en-state {
1434 pins = "gpio9";
1435 function = "normal";
1436 };
1437
1438 misc_3p3_reg_en: misc-3p3-reg-en-state {
1439 pins = "gpio1";
1440 function = "normal";
1441 };
1442 };
1443
1444 &pmc8280_2_gpios {
1445 wwan_sw_en: wwan-sw-en-state {
1446 pins = "gpio1";
1447 function = "normal";
1448 };
1449 };
1450
1451 &pmc8280c_gpios {
1452 edp_bl_pwm: edp-bl-pwm-state {
1453 pins = "gpio8";
1454 function = "func1";
1455 };
1456 };
1457
1458 &pmr735a_gpios {
1459 hastings_reg_en: hastings-reg-en-state {
1460 pins = "gpio1";
1461 function = "normal";
1462 };
1463 };
1464
1465 &tlmm {
1466 gpio-reserved-ranges = <70 2>, <74 6>, <125 2>, <128 2>, <154 4>;
1467
1468 bt_default: bt-default-state {
1469 hstp-bt-en-pins {
1470 pins = "gpio133";
1471 function = "gpio";
1472 drive-strength = <16>;
1473 bias-disable;
1474 };
1475
1476 hstp-sw-ctrl-pins {
1477 pins = "gpio132";
1478 function = "gpio";
1479 bias-pull-down;
1480 };
1481 };
1482
1483 cam_indicator_en: cam-indicator-en-state {
1484 pins = "gpio28";
1485 function = "gpio";
1486 drive-strength = <2>;
1487 bias-disable;
1488 };
1489
1490 cam_rgb_default: cam-rgb-default-state {
1491 mclk-pins {
1492 pins = "gpio17";
1493 function = "cam_mclk";
1494 drive-strength = <16>;
1495 bias-disable;
1496 };
1497
1498 sc-rgb-xshut-n-pins {
1499 pins = "gpio15";
1500 function = "gpio";
1501 drive-strength = <2>;
1502 bias-disable;
1503 };
1504 };
1505
1506 edp_reg_en: edp-reg-en-state {
1507 pins = "gpio25";
1508 function = "gpio";
1509 drive-strength = <16>;
1510 bias-disable;
1511 };
1512
1513 hall_int_n_default: hall-int-n-state {
1514 pins = "gpio107";
1515 function = "gpio";
1516 bias-disable;
1517 };
1518
1519 i2c4_default: i2c4-default-state {
1520 pins = "gpio171", "gpio172";
1521 function = "qup4";
1522 drive-strength = <16>;
1523 bias-disable;
1524 };
1525
1526 i2c11_default: i2c11-default-state {
1527 pins = "gpio18", "gpio19";
1528 function = "qup11";
1529 drive-strength = <16>;
1530 bias-disable;
1531 };
1532
1533 i2c21_default: i2c21-default-state {
1534 pins = "gpio81", "gpio82";
1535 function = "qup21";
1536 drive-strength = <16>;
1537 bias-disable;
1538 };
1539
1540 kybd_default: kybd-default-state {
1541 disable-pins {
1542 pins = "gpio102";
1543 function = "gpio";
1544 output-low;
1545 };
1546
1547 int-n-pins {
1548 pins = "gpio104";
1549 function = "gpio";
1550 bias-disable;
1551 };
1552
1553 reset-pins {
1554 pins = "gpio105";
1555 function = "gpio";
1556 bias-disable;
1557 };
1558 };
1559
1560 nvme_reg_en: nvme-reg-en-state {
1561 pins = "gpio135";
1562 function = "gpio";
1563 drive-strength = <2>;
1564 bias-disable;
1565 };
1566
1567 pcie2a_default: pcie2a-default-state {
1568 clkreq-n-pins {
1569 pins = "gpio142";
1570 function = "pcie2a_clkreq";
1571 drive-strength = <2>;
1572 bias-pull-up;
1573 };
1574
1575 perst-n-pins {
1576 pins = "gpio143";
1577 function = "gpio";
1578 drive-strength = <2>;
1579 bias-disable;
1580 };
1581
1582 wake-n-pins {
1583 pins = "gpio145";
1584 function = "gpio";
1585 drive-strength = <2>;
1586 bias-pull-up;
1587 };
1588 };
1589
1590 pcie3a_default: pcie3a-default-state {
1591 clkreq-n-pins {
1592 pins = "gpio150";
1593 function = "pcie3a_clkreq";
1594 drive-strength = <2>;
1595 bias-pull-up;
1596 };
1597
1598 perst-n-pins {
1599 pins = "gpio151";
1600 function = "gpio";
1601 drive-strength = <2>;
1602 bias-disable;
1603 };
1604
1605 wake-n-pins {
1606 pins = "gpio148";
1607 function = "gpio";
1608 drive-strength = <2>;
1609 bias-pull-up;
1610 };
1611 };
1612
1613 pcie4_default: pcie4-default-state {
1614 clkreq-n-pins {
1615 pins = "gpio140";
1616 function = "pcie4_clkreq";
1617 drive-strength = <2>;
1618 bias-pull-up;
1619 };
1620
1621 perst-n-pins {
1622 pins = "gpio141";
1623 function = "gpio";
1624 drive-strength = <2>;
1625 bias-disable;
1626 };
1627
1628 wake-n-pins {
1629 pins = "gpio139";
1630 function = "gpio";
1631 drive-strength = <2>;
1632 bias-pull-up;
1633 };
1634 };
1635
1636 pm8008_default: pm8008-default-state {
1637 int-pins {
1638 pins = "gpio41";
1639 function = "gpio";
1640 drive-strength = <2>;
1641 bias-pull-down;
1642 };
1643
1644 reset-n-pins {
1645 pins = "gpio42";
1646 function = "gpio";
1647 drive-strength = <2>;
1648 bias-disable;
1649 };
1650 };
1651
1652 spkr_1_sd_n_default: spkr-1-sd-n-default-state {
1653 perst-n-pins {
1654 pins = "gpio178";
1655 function = "gpio";
1656 drive-strength = <16>;
1657 bias-disable;
1658 output-high;
1659 };
1660 };
1661
1662 spkr_2_sd_n_default: spkr-2-sd-n-default-state {
1663 perst-n-pins {
1664 pins = "gpio179";
1665 function = "gpio";
1666 drive-strength = <16>;
1667 bias-disable;
1668 output-high;
1669 };
1670 };
1671
1672 tpad_default: tpad-default-state {
1673 int-n-pins {
1674 pins = "gpio182";
1675 function = "gpio";
1676 bias-disable;
1677 };
1678 };
1679
1680 ts0_default: ts0-default-state {
1681 int-n-pins {
1682 pins = "gpio175";
1683 function = "gpio";
1684 bias-disable;
1685 };
1686
1687 reset-n-pins {
1688 pins = "gpio99";
1689 function = "gpio";
1690 drive-strength = <2>;
1691 bias-disable;
1692 };
1693 };
1694
1695 uart2_default: uart2-default-state {
1696 cts-pins {
1697 pins = "gpio121";
1698 function = "qup2";
1699 bias-bus-hold;
1700 };
1701
1702 rts-pins {
1703 pins = "gpio122";
1704 function = "qup2";
1705 drive-strength = <2>;
1706 bias-disable;
1707 };
1708
1709 rx-pins {
1710 pins = "gpio124";
1711 function = "qup2";
1712 bias-pull-up;
1713 };
1714
1715 tx-pins {
1716 pins = "gpio123";
1717 function = "qup2";
1718 drive-strength = <2>;
1719 bias-disable;
1720 };
1721 };
1722
1723 usb0_sbu_default: usb0-sbu-state {
1724 oe-n-pins {
1725 pins = "gpio101";
1726 function = "gpio";
1727 bias-disable;
1728 drive-strength = <16>;
1729 output-high;
1730 };
1731
1732 sel-pins {
1733 pins = "gpio164";
1734 function = "gpio";
1735 bias-disable;
1736 drive-strength = <16>;
1737 };
1738 };
1739
1740 usb1_sbu_default: usb1-sbu-state {
1741 oe-n-pins {
1742 pins = "gpio48";
1743 function = "gpio";
1744 bias-disable;
1745 drive-strength = <16>;
1746 output-high;
1747 };
1748
1749 sel-pins {
1750 pins = "gpio47";
1751 function = "gpio";
1752 bias-disable;
1753 drive-strength = <16>;
1754 };
1755 };
1756
1757 wcd_default: wcd-default-state {
1758 reset-pins {
1759 pins = "gpio106";
1760 function = "gpio";
1761 bias-disable;
1762 };
1763 };
1764 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.