1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
4 */
5
6 /dts-v1/;
7
8 #include "sdm845-sony-xperia-tama.dtsi"
9
10 /* XZ3 uses an Atmel touchscreen instead. */
11 /delete-node/ &touchscreen;
12
13 / {
14 model = "Sony Xperia XZ3";
15 compatible = "sony,akatsuki-row", "qcom,sdm845";
16
17 /* Fixed DCDC for the OLED panel */
18 ts_vddio_supply: ts-vddio-regulator {
19 compatible = "regulator-fixed";
20 regulator-name = "ts_vddio";
21
22 regulator-min-microvolt = <1840000>;
23 regulator-max-microvolt = <1840000>;
24
25 gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>;
26 enable-active-high;
27 regulator-boot-on;
28 };
29 };
30
31 &ibb {
32 status = "disabled";
33 };
34
35 &lab {
36 status = "disabled";
37 };
38
39 &panel {
40 /* Akatsuki uses an OLED panel. */
41 /delete-property/ backlight;
42 /delete-property/ vsp-supply;
43 /delete-property/ vsn-supply;
44 /delete-property/ touch-reset-gpios;
45 };
46
47 &pmi8998_gpios {
48 gpio-line-names = "NC", /* GPIO_1 */
49 "NC",
50 "NC",
51 "",
52 "NC",
53 "NC",
54 "",
55 "WLC_EN_N",
56 "NC",
57 "NC", /* GPIO_10 */
58 "NC",
59 "CAM_IO_EN",
60 "",
61 "NC";
62 };
63
64 &pmi8998_wled {
65 status = "disabled";
66 };
67
68 &tlmm {
69 gpio-line-names = "NC", /* GPIO_0 */
70 "NC",
71 "NC",
72 "NC",
73 "DEBUG_UART_TX",
74 "DEBUG_UART_RX",
75 "DISP_RESET_N",
76 "SAMD_RSTEN_N",
77 "CHAT_CAM_PWR_EN",
78 "CAM2_RSTN",
79 "MDP_VSYNC_P", /* GPIO_10 */
80 "RGBC_IR_INT",
81 "NFC_VEN",
82 "CAM_MCLK0",
83 "CAM_MCLK1",
84 "NC",
85 "MASTER_RST_N",
86 "CCI_I2C_SDA0",
87 "CCI_I2C_SCL0",
88 "CCI_I2C_SDA1",
89 "CCI_I2C_SCL1", /* GPIO_20 */
90 "CAM_SOF",
91 "TOF_INT",
92 "TOF_RESET_N",
93 "NC",
94 "NC",
95 "NC",
96 "MAIN_CAM_PWR_EN",
97 "DVDT_ENABLE",
98 "DVDT_WRT_DET_AND",
99 "DVDT_WRT_DET_OR", /* GPIO_30 */
100 "WLC_INT_N",
101 "NC",
102 "CAMSENSOR_I2C_SDA",
103 "CAMSENSOR_I2C_SCL",
104 "NC",
105 "NC",
106 "NC",
107 "CC_DIR",
108 "NC",
109 "FP_RESET_N", /* GPIO_40 */
110 "NC",
111 "NC",
112 "NC",
113 "DISP_ERR_FG",
114 "BT_HCI_UART_CTS_N",
115 "BT_HCI_UART_RFR_N",
116 "BT_HCI_UART_TXD",
117 "BT_HCI_UART_TRXD",
118 "USB_AUDIO_EN1",
119 "SW_SERVICE", /* GPIO_50 */
120 "US_EURO_SEL",
121 "SAMD_BOOTL_PIN",
122 "CODEC_INT2_N",
123 "CODEC_INT1_N",
124 "APPS_I2C_SDA",
125 "APPS_I2C_SCL",
126 "FORCED_USB_BOOT",
127 "SDM_SWD_CLK",
128 "SDM_SWD_DAT",
129 "SAMD_RST", /* GPIO_60 */
130 "USB_PD_EN",
131 "NFC_DWLD_EN",
132 "NFC_IRQ",
133 "CODEC_RST_N",
134 "CODEC_SPI_MISO",
135 "CODEC_SPI_MOSI",
136 "CODEC_SPI_CLK",
137 "CODEC_SPI_CS_N",
138 "NC",
139 "CODEC_SLIMBUS_CLK", /* GPIO_70 */
140 "CODEC_SLIMBUS_DATA0",
141 "CODEC_SLIMBUS_DATA1",
142 "BT_FM_SLIMBUS_DATA",
143 "BT_FM_SLIMBUS_CLK",
144 "HW_ID_0",
145 "HW_ID_1",
146 "TX_GTR_THRES_IN",
147 "MODE_SEL2",
148 "NC",
149 "CAM1_RSTN", /* GPIO_80 */
150 "",
151 "",
152 "",
153 "",
154 "TS_I2C_SDA",
155 "TS_I2C_SCL",
156 "NC",
157 "NC",
158 "NC",
159 "NC", /* GPIO_90 */
160 "NC",
161 "NC",
162 "NC",
163 "NC",
164 "NC",
165 "NC",
166 "RFFE6_CLK",
167 "RFFE6_DATA",
168 "TS_RESET_N",
169 "", /* GPIO_100 */
170 "GRFC4",
171 "DEBUG_GPIO0",
172 "DEBUG_GPIO1",
173 "RF_LCD_ID_EN",
174 "UIM2_DATA",
175 "UIM2_CLK",
176 "UIM2_RESET",
177 "UIM2_PRESENT",
178 "UIM1_DATA",
179 "UIM1_CLK", /* GPIO_110 */
180 "UIM1_RESET",
181 "UIM1_PRESENT",
182 "NC",
183 "NC",
184 "NC",
185 "NFC_ESE_PWR_REQ",
186 "ACCEL_INT",
187 "GYRO_INT",
188 "COMPASS_INT",
189 "ALS_PROX_INT_N", /* GPIO_120 */
190 "FP_INT",
191 "RF_ID_EXTENTION",
192 "BAROMETER_INT",
193 "ACC_COVER_OPEN",
194 "TS_INT_N",
195 "TRAY_DET",
196 "GRFC3",
197 "NC",
198 "UIM2_DETECT_EN",
199 "QLINK_REQUEST", /* GPIO_130 */
200 "QLINK_ENABLE",
201 "GRFC2",
202 "TS_VDDIO_EN",
203 "WMSS_RESET_N",
204 "PA_INDICATOR_OR",
205 "GRFC1",
206 "RFFE3_DATA",
207 "RFFE3_CLK",
208 "RFFE4_DATA",
209 "RFFE4_CLK", /* GPIO_140 */
210 "RFFE5_DATA",
211 "RFFE5_CLK",
212 "GNSS_EN",
213 "MSS_LTE_COXM_TXD",
214 "MSS_LTE_COXM_RXD",
215 "RFFE2_DATA",
216 "RFFE2_CLK",
217 "RFFE1_DATA",
218 "RFFE1_CLK";
219
220 ts_vddio_en: ts-vddio-en-state {
221 pins = "gpio133";
222 function = "gpio";
223 drive-strength = <2>;
224 bias-disable;
225 output-high;
226 };
227 };
228
229 &vreg_l14a_1p8 {
230 regulator-min-microvolt = <1840000>;
231 regulator-max-microvolt = <1840000>;
232 };
233
234 &vreg_l22a_2p8 {
235 /* Note: Round-down from 2700000 to be a multiple of PLDO step-size 8000 */
236 regulator-min-microvolt = <2696000>;
237 regulator-max-microvolt = <2696000>;
238 };
239
240 &vreg_l28a_2p8 {
241 regulator-min-microvolt = <3000000>;
242 regulator-max-microvolt = <3000000>;
243 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.