1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2 /*
3 * Copyright (c) 2023 - 2024, Dang Huynh <danct12@riseup.net>
4 */
5
6 /dts-v1/;
7
8 #include "sm6115.dtsi"
9 #include "pm6125.dtsi"
10 #include "pmi632.dtsi"
11 #include <dt-bindings/arm/qcom,ids.h>
12 #include <dt-bindings/leds/common.h>
13 #include <dt-bindings/usb/pd.h>
14
15 / {
16 model = "F(x)tec Pro1X (QX1050)";
17 compatible = "fxtec,pro1x", "qcom,sm6115";
18 chassis-type = "handset";
19
20 qcom,msm-id = <QCOM_ID_SM6115 0x10000>;
21
22 chosen {
23 #address-cells = <2>;
24 #size-cells = <2>;
25 ranges;
26
27 framebuffer0: framebuffer@5c000000 {
28 compatible = "simple-framebuffer";
29 reg = <0x0 0x5c000000 0x0 (1080 * 2160 * 4)>;
30 width = <1080>;
31 height = <2160>;
32 stride = <(1080 * 4)>;
33 format = "a8r8g8b8";
34 clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
35 };
36 };
37
38 disp_elvdd_supply: disp-elvdd-supply {
39 compatible = "regulator-fixed";
40 regulator-name = "disp_elvdd_supply";
41 };
42
43 disp_elvss_supply: disp-elvss-supply {
44 compatible = "regulator-fixed";
45 regulator-name = "disp_elvss_supply";
46 };
47
48 disp_vcc_supply: disp-vcc-supply {
49 compatible = "regulator-fixed";
50 regulator-name = "disp_vcc_supply";
51 };
52
53 disp_vci_supply: disp-vci-supply {
54 compatible = "regulator-fixed";
55 regulator-name = "disp_vci_supply";
56 };
57
58 gpio-keys {
59 compatible = "gpio-keys";
60
61 pinctrl-0 = <&hall_sensor_n>, <&key_camera_n>, <&vol_up_n>;
62 pinctrl-names = "default";
63
64 hall-switch {
65 label = "Hall Switch";
66 linux,input-type = <EV_SW>;
67 linux,code = <SW_KEYPAD_SLIDE>;
68 gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
69 debounce-interval = <90>;
70 wakeup-source;
71 };
72
73 key-camera {
74 label = "Camera Button";
75 linux,code = <KEY_CAMERA>;
76 gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
77 debounce-interval = <15>;
78 };
79
80 key-volume-up {
81 label = "Volume Up";
82 linux,code = <KEY_VOLUMEUP>;
83 gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
84 debounce-interval = <15>;
85 linux,can-disable;
86 wakeup-source;
87 };
88 };
89
90 gpio-leds {
91 compatible = "gpio-leds";
92
93 capslock-led {
94 label = "green:capslock";
95 function = LED_FUNCTION_CAPSLOCK;
96 color = <LED_COLOR_ID_GREEN>;
97 gpios = <&pca9534 1 GPIO_ACTIVE_HIGH>;
98 linux,default-trigger = "kbd-capslock";
99 default-state = "off";
100 };
101 };
102
103 ts_vdd_supply: ts-vdd-supply {
104 compatible = "regulator-fixed";
105 regulator-name = "ts_vdd_supply";
106 gpio = <&pca9534 3 GPIO_ACTIVE_HIGH>;
107 enable-active-high;
108 };
109
110 ts_vddio_supply: ts-vddio-supply {
111 compatible = "regulator-fixed";
112 regulator-name = "ts_vddio_supply";
113 gpio = <&pca9534 2 GPIO_ACTIVE_HIGH>;
114 enable-active-high;
115 };
116 };
117
118 &gpi_dma0 {
119 status = "okay";
120 };
121
122 &gpu {
123 status = "okay";
124
125 zap-shader {
126 firmware-name = "qcom/sm6115/Fxtec/QX1050/a610_zap.mbn";
127 };
128 };
129
130 &i2c1 {
131 clock-frequency = <100000>;
132
133 status = "okay";
134
135 pca9534: gpio@21 {
136 compatible = "nxp,pca9534";
137 reg = <0x21>;
138 gpio-controller;
139 #gpio-cells = <2>;
140 };
141 };
142
143 &i2c2 {
144 status = "okay";
145 /* Clock frequency was not specified downstream, let's park it to 100 KHz */
146 clock-frequency = <100000>;
147
148 touchscreen@14 {
149 compatible = "goodix,gt9286";
150 reg = <0x14>;
151
152 interrupts-extended = <&tlmm 80 IRQ_TYPE_LEVEL_LOW>;
153
154 irq-gpios = <&tlmm 80 IRQ_TYPE_LEVEL_LOW>;
155 reset-gpios = <&tlmm 71 GPIO_ACTIVE_HIGH>;
156 AVDD28-supply = <&ts_vdd_supply>;
157 VDDIO-supply = <&ts_vddio_supply>;
158
159 pinctrl-0 = <&ts_int_n>, <&ts_rst_n>;
160 pinctrl-names = "default";
161 };
162 };
163
164 &mdss {
165 status = "okay";
166 };
167
168 &mdss_dsi0 {
169 vdda-supply = <&pm6125_l18a>;
170 status = "okay";
171
172 panel: panel@0 {
173 compatible = "boe,bf060y8m-aj0";
174 reg = <0>;
175
176 reset-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
177
178 elvdd-supply = <&disp_elvdd_supply>;
179 elvss-supply = <&disp_elvss_supply>;
180 vcc-supply = <&disp_vcc_supply>;
181 vci-supply = <&disp_vci_supply>;
182 vddio-supply = <&pm6125_l9a>;
183
184 pinctrl-0 = <&mdss_dsi_n &panel_en_n>;
185 pinctrl-names = "default";
186
187 port {
188 panel_in: endpoint {
189 remote-endpoint = <&mdss_dsi0_out>;
190 };
191 };
192 };
193 };
194
195 &mdss_dsi0_out {
196 data-lanes = <0 1 2 3>;
197 remote-endpoint = <&panel_in>;
198 };
199
200 &mdss_dsi0_phy {
201 status = "okay";
202 };
203
204 &pm6125_gpios {
205 vol_up_n: vol-up-n-state {
206 pins = "gpio5";
207 function = "normal";
208 power-source = <0>;
209 bias-pull-up;
210 input-enable;
211 };
212 };
213
214 &pmi632_lpg {
215 status = "okay";
216
217 multi-led {
218 color = <LED_COLOR_ID_RGB>;
219 function = LED_FUNCTION_STATUS;
220
221 #address-cells = <1>;
222 #size-cells = <0>;
223
224 led@1 {
225 reg = <1>;
226 color = <LED_COLOR_ID_RED>;
227 };
228
229 led@2 {
230 reg = <2>;
231 color = <LED_COLOR_ID_GREEN>;
232 };
233
234 led@3 {
235 reg = <3>;
236 color = <LED_COLOR_ID_BLUE>;
237 };
238 };
239 };
240
241 &pmi632_typec {
242 status = "okay";
243
244 connector {
245 compatible = "usb-c-connector";
246
247 power-role = "dual";
248 data-role = "dual";
249 self-powered;
250
251 typec-power-opmode = "default";
252 pd-disable;
253
254 ports {
255 #address-cells = <1>;
256 #size-cells = <0>;
257
258 port@0 {
259 reg = <0>;
260 pmi632_hs_in: endpoint {
261 remote-endpoint = <&usb_dwc3_hs>;
262 };
263 };
264
265 port@1 {
266 reg = <1>;
267 pmi632_ss_in: endpoint {
268 remote-endpoint = <&usb_qmpphy_out>;
269 };
270 };
271 };
272 };
273 };
274
275 &pmi632_vbus {
276 regulator-min-microamp = <500000>;
277 regulator-max-microamp = <1000000>;
278 status = "okay";
279 };
280
281 &pon_pwrkey {
282 status = "okay";
283 };
284
285 &pon_resin {
286 linux,code = <KEY_VOLUMEDOWN>;
287 status = "okay";
288 };
289
290 &qupv3_id_0 {
291 status = "okay";
292 };
293
294 &remoteproc_adsp {
295 firmware-name = "qcom/sm6115/Fxtec/QX1050/adsp.mbn";
296 status = "okay";
297 };
298
299 &remoteproc_cdsp {
300 firmware-name = "qcom/sm6115/Fxtec/QX1050/cdsp.mbn";
301 status = "okay";
302 };
303
304 &remoteproc_mpss {
305 firmware-name = "qcom/sm6115/Fxtec/QX1050/modem.mbn";
306 status = "okay";
307 };
308
309 &rpm_requests {
310 regulators-0 {
311 compatible = "qcom,rpm-pm6125-regulators";
312
313 pm6125_s6a: s6 {
314 regulator-min-microvolt = <304000>;
315 regulator-max-microvolt = <1456000>;
316 };
317
318 pm6125_s7a: s7 {
319 regulator-min-microvolt = <1280000>;
320 regulator-max-microvolt = <2040000>;
321 };
322
323 pm6125_s8a: s8 {
324 regulator-min-microvolt = <1064000>;
325 regulator-max-microvolt = <1304000>;
326 };
327
328 pm6125_l1a: l1 {
329 regulator-min-microvolt = <952000>;
330 regulator-max-microvolt = <1152000>;
331 };
332
333 pm6125_l4a: l4 {
334 regulator-min-microvolt = <488000>;
335 regulator-max-microvolt = <1000000>;
336 };
337
338 pm6125_l5a: l5 {
339 regulator-min-microvolt = <1648000>;
340 regulator-max-microvolt = <3056000>;
341 regulator-allow-set-load;
342 };
343
344 pm6125_l6a: l6 {
345 regulator-min-microvolt = <576000>;
346 regulator-max-microvolt = <656000>;
347 };
348
349 pm6125_l7a: l7 {
350 regulator-min-microvolt = <1200000>;
351 regulator-max-microvolt = <1304000>;
352 };
353
354 pm6125_l8a: l8 {
355 regulator-min-microvolt = <400000>;
356 regulator-max-microvolt = <728000>;
357 };
358
359 pm6125_l9a: l9 {
360 regulator-min-microvolt = <1800000>;
361 regulator-max-microvolt = <2000000>;
362 };
363
364 pm6125_l10a: l10 {
365 regulator-min-microvolt = <1704000>;
366 regulator-max-microvolt = <1904000>;
367 };
368
369 pm6125_l11a: l11 {
370 regulator-min-microvolt = <1704000>;
371 regulator-max-microvolt = <1952000>;
372 regulator-allow-set-load;
373 };
374
375 pm6125_l12a: l12 {
376 regulator-min-microvolt = <1624000>;
377 regulator-max-microvolt = <1984000>;
378 };
379
380 pm6125_l13a: l13 {
381 regulator-min-microvolt = <1504000>;
382 regulator-max-microvolt = <1952000>;
383 };
384
385 pm6125_l14a: l14 {
386 regulator-min-microvolt = <1704000>;
387 regulator-max-microvolt = <1904000>;
388 };
389
390 pm6125_l15a: l15 {
391 regulator-min-microvolt = <2920000>;
392 regulator-max-microvolt = <3232000>;
393 };
394
395 pm6125_l16a: l16 {
396 regulator-min-microvolt = <1704000>;
397 regulator-max-microvolt = <1904000>;
398 };
399
400 pm6125_l17a: l17 {
401 regulator-min-microvolt = <1152000>;
402 regulator-max-microvolt = <1384000>;
403 };
404
405 pm6125_l18a: l18 {
406 regulator-min-microvolt = <1104000>;
407 regulator-max-microvolt = <1312000>;
408 };
409
410 pm6125_l19a: l19 {
411 regulator-min-microvolt = <1624000>;
412 regulator-max-microvolt = <3304000>;
413 };
414
415 pm6125_l20a: l20 {
416 regulator-min-microvolt = <1624000>;
417 regulator-max-microvolt = <3304000>;
418 };
419
420 pm6125_l21a: l21 {
421 regulator-min-microvolt = <2400000>;
422 regulator-max-microvolt = <3600000>;
423 };
424
425 pm6125_l22a: l22 {
426 regulator-min-microvolt = <2952000>;
427 regulator-max-microvolt = <3304000>;
428 };
429
430 pm6125_l23a: l23 {
431 regulator-min-microvolt = <3200000>;
432 regulator-max-microvolt = <3400000>;
433 };
434
435 pm6125_l24a: l24 {
436 regulator-min-microvolt = <2704000>;
437 regulator-max-microvolt = <3600000>;
438 regulator-allow-set-load;
439 };
440 };
441 };
442
443 &sdc2_state_off {
444 cd-pins {
445 pins = "gpio88";
446 function = "gpio";
447 drive-strength = <2>;
448 bias-disable;
449 };
450 };
451
452 &sdc2_state_on {
453 cd-pins {
454 pins = "gpio88";
455 function = "gpio";
456 drive-strength = <2>;
457 bias-pull-up;
458 };
459 };
460
461 &sdhc_2 {
462 pinctrl-0 = <&sdc2_state_on>;
463 pinctrl-1 = <&sdc2_state_off>;
464 pinctrl-names = "default", "sleep";
465
466 cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>;
467
468 vmmc-supply = <&pm6125_l22a>;
469 vqmmc-supply = <&pm6125_l5a>;
470
471 status = "okay";
472 };
473
474 &sleep_clk {
475 clock-frequency = <32764>;
476 };
477
478 &tlmm {
479 gpio-reserved-ranges = <0 4>, <14 4>;
480
481 key_camera_n: key-camera-n-state {
482 pins = "gpio18";
483 function = "gpio";
484 drive-strength = <2>;
485 bias-pull-up;
486 };
487
488 panel_en_n: panel-en-n-state {
489 pins = "gpio65";
490 function = "gpio";
491 bias-disable;
492 };
493
494 ts_rst_n: ts-rst-n-state {
495 pins = "gpio71";
496 function = "gpio";
497 drive-strength = <8>;
498 bias-pull-up;
499 };
500
501 ts_int_n: ts-int-n-state {
502 pins = "gpio80";
503 function = "gpio";
504 drive-strength = <8>;
505 bias-pull-up;
506 };
507
508 mdss_dsi_n: mdss-dsi-n-state {
509 pins = "gpio82";
510 function = "gpio";
511 drive-strength = <8>;
512 bias-disable;
513 };
514
515 hall_sensor_n: hall-sensor-n-state {
516 pins = "gpio96";
517 function = "gpio";
518 drive-strength = <2>;
519 bias-pull-up;
520 };
521 };
522
523 &ufs_mem_hc {
524 vcc-supply = <&pm6125_l24a>;
525 vcc-max-microamp = <600000>;
526 vccq2-supply = <&pm6125_l11a>;
527 vccq2-max-microamp = <600000>;
528 vdd-hba-supply = <&pm6125_l18a>;
529 status = "okay";
530 };
531
532 &ufs_mem_phy {
533 vdda-phy-supply = <&pm6125_l4a>;
534 vdda-pll-supply = <&pm6125_l12a>;
535 status = "okay";
536 };
537
538 &usb {
539 status = "okay";
540 };
541
542 &usb_dwc3_hs {
543 remote-endpoint = <&pmi632_hs_in>;
544 };
545
546 &usb_hsphy {
547 vdd-supply = <&pm6125_l4a>;
548 vdda-pll-supply = <&pm6125_l12a>;
549 vdda-phy-dpdm-supply = <&pm6125_l15a>;
550 status = "okay";
551 };
552
553 &usb_qmpphy {
554 vdda-phy-supply = <&pm6125_l4a>;
555 vdda-pll-supply = <&pm6125_l12a>;
556 status = "okay";
557 };
558
559 &usb_qmpphy_out {
560 remote-endpoint = <&pmi632_ss_in>;
561 };
562
563 &wifi {
564 vdd-0.8-cx-mx-supply = <&pm6125_l8a>;
565 vdd-1.8-xo-supply = <&pm6125_l16a>;
566 vdd-1.3-rfa-supply = <&pm6125_l17a>;
567 vdd-3.3-ch0-supply = <&pm6125_l23a>;
568
569 qcom,ath10k-calibration-variant = "Fxtec_QX1050";
570
571 status = "okay";
572 };
573
574 &xo_board {
575 clock-frequency = <19200000>;
576 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.