1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org>
4 */
5
6 /dts-v1/;
7
8 #include "sm6125.dtsi"
9 #include "pm6125.dtsi"
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/input/gpio-keys.h>
12 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
13
14 / {
15 /* required for bootloader to select correct board */
16 qcom,msm-id = <394 0x10000>; /* sm6125 v1 */
17 qcom,board-id = <34 0>;
18
19 model = "Sony Xperia 10 II";
20 compatible = "sony,pdx201", "qcom,sm6125";
21 chassis-type = "handset";
22
23 aliases {
24 mmc0 = &sdhc_1; /* SDC1 eMMC slot */
25 mmc1 = &sdhc_2; /* SDC2 SD card slot */
26 };
27
28 chosen {
29 #address-cells = <2>;
30 #size-cells = <2>;
31 ranges;
32
33 framebuffer0: framebuffer@5c000000 {
34 compatible = "simple-framebuffer";
35 reg = <0 0x5c000000 0 (2520 * 1080 * 4)>;
36 width = <1080>;
37 height = <2520>;
38 stride = <(1080 * 4)>;
39 format = "a8r8g8b8";
40 };
41 };
42
43 extcon_usb: extcon-usb {
44 compatible = "linux,extcon-usb-gpio";
45 id-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
46 };
47
48 gpio-keys {
49 compatible = "gpio-keys";
50
51 pinctrl-0 = <&vol_down_n>;
52 pinctrl-names = "default";
53
54 key-volume-down {
55 label = "Volume Down";
56 gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
57 linux,code = <KEY_VOLUMEDOWN>;
58 debounce-interval = <15>;
59 linux,can-disable;
60 wakeup-source;
61 };
62 };
63
64 reserved-memory {
65 #address-cells = <2>;
66 #size-cells = <2>;
67 debug_mem: memory@ffb00000 {
68 reg = <0x0 0xffb00000 0x0 0xc0000>;
69 no-map;
70 };
71
72 last_log_mem: memory@ffbc0000 {
73 reg = <0x0 0xffbc0000 0x0 0x80000>;
74 no-map;
75 };
76
77 pstore_mem: ramoops@ffc00000 {
78 compatible = "ramoops";
79 reg = <0x0 0xffc40000 0x0 0xc0000>;
80 record-size = <0x1000>;
81 console-size = <0x40000>;
82 pmsg-size = <0x20000>;
83 };
84
85 cmdline_mem: memory@ffd00000 {
86 reg = <0x0 0xffd40000 0x0 0x1000>;
87 no-map;
88 };
89 };
90
91 thermal-zones {
92 rf-pa0-thermal {
93 thermal-sensors = <&pm6125_adc_tm 0>;
94
95 trips {
96 active-config0 {
97 temperature = <125000>;
98 hysteresis = <1000>;
99 type = "critical";
100 };
101 };
102 };
103
104 quiet-thermal {
105 thermal-sensors = <&pm6125_adc_tm 1>;
106
107 trips {
108 active-config0 {
109 temperature = <125000>;
110 hysteresis = <1000>;
111 type = "critical";
112 };
113 };
114 };
115
116 xo-thermal {
117 thermal-sensors = <&pm6125_adc_tm 2>;
118
119 trips {
120 active-config0 {
121 temperature = <125000>;
122 hysteresis = <1000>;
123 type = "critical";
124 };
125 };
126 };
127
128 rf-pa1-thermal {
129 thermal-sensors = <&pm6125_adc_tm 3>;
130
131 trips {
132 active-config0 {
133 temperature = <125000>;
134 hysteresis = <1000>;
135 type = "critical";
136 };
137 };
138 };
139 };
140 };
141
142 &gpi_dma0 {
143 status = "okay";
144 };
145
146 &hsusb_phy1 {
147 vdd-supply = <&pm6125_l7>;
148 vdda-pll-supply = <&pm6125_l10>;
149 vdda-phy-dpdm-supply = <&pm6125_l15>;
150 status = "okay";
151 };
152
153 &i2c1 {
154 clock-frequency = <400000>;
155 status = "okay";
156
157 /* NXP PN553 NFC @ 28 */
158 };
159
160 &i2c2 {
161 clock-frequency = <400000>;
162 status = "okay";
163
164 /* Samsung touchscreen @ 48 */
165 };
166
167 &i2c3 {
168 clock-frequency = <1000000>;
169 status = "okay";
170
171 /* Cirrus Logic CS35L41 boosted audio amplifier @ 40 */
172 };
173
174 &mdss {
175 status = "okay";
176 };
177
178 &mdss_dsi0 {
179 vdda-supply = <&pm6125_l18>;
180 status = "okay";
181
182 panel@0 {
183 compatible = "samsung,sofef01-m-ams597ut01";
184 reg = <0>;
185
186 reset-gpios = <&tlmm 90 GPIO_ACTIVE_LOW>;
187
188 vddio-supply = <&pm6125_l12>;
189
190 pinctrl-0 = <&mdss_dsi_active &mdss_te_active_sleep>;
191 pinctrl-1 = <&mdss_dsi_sleep &mdss_te_active_sleep>;
192 pinctrl-names = "default", "sleep";
193
194 port {
195 panel_in: endpoint {
196 remote-endpoint = <&mdss_dsi0_out>;
197 };
198 };
199 };
200 };
201
202 &mdss_dsi0_out {
203 remote-endpoint = <&panel_in>;
204 data-lanes = <0 1 2 3>;
205 };
206
207 &mdss_dsi0_phy {
208 status = "okay";
209 };
210
211 &pm6125_adc {
212 pinctrl-names = "default";
213 pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm &rf_pa1_therm>;
214
215 channel@4d {
216 reg = <ADC5_AMUX_THM1_100K_PU>;
217 qcom,ratiometric;
218 qcom,hw-settle-time = <200>;
219 qcom,pre-scaling = <1 1>;
220 label = "rf_pa0_therm";
221 };
222
223 channel@4e {
224 reg = <ADC5_AMUX_THM2_100K_PU>;
225 qcom,ratiometric;
226 qcom,hw-settle-time = <200>;
227 qcom,pre-scaling = <1 1>;
228 label = "quiet_therm";
229 };
230
231 channel@52 {
232 reg = <ADC5_GPIO1_100K_PU>;
233 qcom,ratiometric;
234 qcom,hw-settle-time = <200>;
235 qcom,pre-scaling = <1 1>;
236 label = "camera_flash_therm";
237 };
238
239 channel@54 {
240 reg = <ADC5_GPIO3_100K_PU>;
241 qcom,ratiometric;
242 qcom,hw-settle-time = <200>;
243 qcom,pre-scaling = <1 1>;
244 label = "emmc_ufs_therm";
245 };
246
247 channel@55 {
248 reg = <ADC5_GPIO4_100K_PU>;
249 qcom,ratiometric;
250 qcom,hw-settle-time = <200>;
251 qcom,pre-scaling = <1 1>;
252 label = "rf_pa1_therm";
253 };
254 };
255
256 &pm6125_adc_tm {
257 status = "okay";
258
259 rf-pa0-therm@0 {
260 reg = <0>;
261 io-channels = <&pm6125_adc ADC5_AMUX_THM1_100K_PU>;
262 qcom,ratiometric;
263 qcom,hw-settle-time-us = <200>;
264 };
265
266 quiet-therm@1 {
267 reg = <1>;
268 io-channels = <&pm6125_adc ADC5_AMUX_THM2_100K_PU>;
269 qcom,ratiometric;
270 qcom,hw-settle-time-us = <200>;
271 };
272
273 xo-therm@2 {
274 reg = <2>;
275 io-channels = <&pm6125_adc ADC5_XO_THERM_100K_PU>;
276 qcom,ratiometric;
277 qcom,hw-settle-time-us = <200>;
278 };
279
280 rf-pa1-therm@3 {
281 reg = <3>;
282 io-channels = <&pm6125_adc ADC5_GPIO4_100K_PU>;
283 qcom,ratiometric;
284 qcom,hw-settle-time-us = <200>;
285 };
286 };
287
288 &pm6125_gpios {
289 camera_flash_therm: camera-flash-therm-state {
290 pins = "gpio3";
291 function = PMIC_GPIO_FUNC_NORMAL;
292 bias-high-impedance;
293 };
294
295 emmc_ufs_therm: emmc-ufs-therm-state {
296 pins = "gpio6";
297 function = PMIC_GPIO_FUNC_NORMAL;
298 bias-high-impedance;
299 };
300
301 rf_pa1_therm: rf-pa1-therm-state {
302 pins = "gpio7";
303 function = PMIC_GPIO_FUNC_NORMAL;
304 bias-high-impedance;
305 };
306 };
307
308 &pon_pwrkey {
309 status = "okay";
310 };
311
312 &pon_resin {
313 status = "okay";
314 linux,code = <KEY_VOLUMEUP>;
315 };
316
317 &rpm_requests {
318 regulators-0 {
319 compatible = "qcom,rpm-pm6125-regulators";
320
321 vdd_l2_l3_l4-supply = <&pm6125_l7>;
322 vdd_l5_l15_l19_l20_l21_l22-supply = <&pm6125_l10>;
323
324 /*
325 * S3/S4 is VDD_CX
326 * S5 is VDD_MX/WCSS_MX
327 */
328
329 pm6125_s6: s6 {
330 regulator-min-microvolt = <936000>;
331 regulator-max-microvolt = <1422000>;
332 };
333
334 pm6125_l1: l1 {
335 regulator-min-microvolt = <1200000>;
336 regulator-max-microvolt = <1256000>;
337 };
338
339 pm6125_l2: l2 {
340 regulator-min-microvolt = <1000000>;
341 regulator-max-microvolt = <1056000>;
342 };
343
344 pm6125_l3: l3 {
345 regulator-min-microvolt = <1000000>;
346 regulator-max-microvolt = <1064000>;
347 };
348
349 pm6125_l4: l4 {
350 regulator-min-microvolt = <872000>;
351 regulator-max-microvolt = <976000>;
352 };
353
354 pm6125_l5: l5 {
355 regulator-min-microvolt = <1648000>;
356 regulator-max-microvolt = <2950000>;
357 regulator-allow-set-load;
358 };
359
360 pm6125_l6: l6 {
361 regulator-min-microvolt = <576000>;
362 regulator-max-microvolt = <656000>;
363 };
364
365 pm6125_l7: l7 {
366 regulator-min-microvolt = <872000>;
367 regulator-max-microvolt = <976000>;
368 };
369
370 pm6125_l8: l8 {
371 regulator-min-microvolt = <400000>;
372 regulator-max-microvolt = <728000>;
373 };
374
375 pm6125_l9: l9 {
376 regulator-min-microvolt = <1800000>;
377 regulator-max-microvolt = <1896000>;
378 };
379
380 pm6125_l10: l10 {
381 regulator-min-microvolt = <1800000>;
382 regulator-max-microvolt = <1896000>;
383 };
384
385 pm6125_l11: l11 {
386 regulator-min-microvolt = <1800000>;
387 regulator-max-microvolt = <1800000>;
388 regulator-allow-set-load;
389 };
390
391 pm6125_l12: l12 {
392 regulator-min-microvolt = <1800000>;
393 regulator-max-microvolt = <1996000>;
394 };
395
396 pm6125_l13: l13 {
397 regulator-min-microvolt = <1800000>;
398 regulator-max-microvolt = <1832000>;
399 };
400
401 pm6125_l14: l14 {
402 regulator-min-microvolt = <1800000>;
403 regulator-max-microvolt = <1904000>;
404 };
405
406 pm6125_l15: l15 {
407 regulator-min-microvolt = <3104000>;
408 regulator-max-microvolt = <3232000>;
409 };
410
411 pm6125_l16: l16 {
412 regulator-min-microvolt = <1800000>;
413 regulator-max-microvolt = <1904000>;
414 };
415
416 pm6125_l17: l17 {
417 regulator-min-microvolt = <1248000>;
418 regulator-max-microvolt = <1304000>;
419 };
420
421 pm6125_l18: l18 {
422 regulator-min-microvolt = <1200000>;
423 regulator-max-microvolt = <1264000>;
424 };
425
426 pm6125_l19: l19 {
427 regulator-min-microvolt = <1648000>;
428 regulator-max-microvolt = <2952000>;
429 };
430
431 pm6125_l20: l20 {
432 regulator-min-microvolt = <1648000>;
433 regulator-max-microvolt = <2952000>;
434 };
435
436 pm6125_l21: l21 {
437 regulator-min-microvolt = <2600000>;
438 regulator-max-microvolt = <2856000>;
439 };
440
441 pm6125_l22: l22 {
442 regulator-min-microvolt = <2944000>;
443 regulator-max-microvolt = <2950000>;
444 regulator-allow-set-load;
445 };
446
447 pm6125_l23: l23 {
448 regulator-min-microvolt = <3000000>;
449 regulator-max-microvolt = <3400000>;
450 };
451
452 pm6125_l24: l24 {
453 regulator-min-microvolt = <2944000>;
454 regulator-max-microvolt = <2950000>;
455 regulator-allow-set-load;
456 };
457 };
458 };
459
460 &qupv3_id_0 {
461 status = "okay";
462 };
463
464 &sdc2_off_state {
465 sd-cd-pins {
466 pins = "gpio98";
467 function = "gpio";
468 drive-strength = <2>;
469 bias-disable;
470 };
471 };
472
473 &sdc2_on_state {
474 sd-cd-pins {
475 pins = "gpio98";
476 function = "gpio";
477 drive-strength = <2>;
478 bias-pull-up;
479 };
480 };
481
482 &sdhc_1 {
483 vmmc-supply = <&pm6125_l24>;
484 vqmmc-supply = <&pm6125_l11>;
485 status = "okay";
486 };
487
488 &sdhc_2 {
489 cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
490 vmmc-supply = <&pm6125_l22>;
491 vqmmc-supply = <&pm6125_l5>;
492 no-sdio;
493 no-mmc;
494 status = "okay";
495 };
496
497 &tlmm {
498 gpio-reserved-ranges = <22 2>, <28 6>;
499
500 vol_down_n: vol-down-n-state {
501 pins = "gpio47";
502 function = "gpio";
503 drive-strength = <2>;
504 bias-disable;
505 };
506
507 mdss_te_active_sleep: mdss-te-active-sleep-state {
508 pins = "gpio89";
509 function = "mdp_vsync";
510 drive-strength = <2>;
511 bias-pull-down;
512 };
513
514 mdss_dsi_active: mdss-dsi-active-state {
515 pins = "gpio90";
516 function = "gpio";
517 drive-strength = <8>;
518 bias-disable;
519 };
520
521 mdss_dsi_sleep: mdss-dsi-sleep-state {
522 pins = "gpio90";
523 function = "gpio";
524 drive-strength = <2>;
525 bias-pull-down;
526 };
527
528 };
529
530 &usb3 {
531 status = "okay";
532 };
533
534 &usb3_dwc3 {
535 extcon = <&extcon_usb>;
536 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.