~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/scripts/dtc/include-prefixes/arm64/qcom/sm6125.dtsi

Version: ~ [ linux-6.12-rc7 ] ~ [ linux-6.11.7 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.60 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.116 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.171 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.229 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.285 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.323 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.12 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 // SPDX-License-Identifier: BSD-3-Clause
  2 /*
  3  * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org>
  4  */
  5 
  6 #include <dt-bindings/clock/qcom,dispcc-sm6125.h>
  7 #include <dt-bindings/clock/qcom,gcc-sm6125.h>
  8 #include <dt-bindings/clock/qcom,rpmcc.h>
  9 #include <dt-bindings/dma/qcom-gpi.h>
 10 #include <dt-bindings/gpio/gpio.h>
 11 #include <dt-bindings/interrupt-controller/arm-gic.h>
 12 #include <dt-bindings/power/qcom-rpmpd.h>
 13 
 14 / {
 15         interrupt-parent = <&intc>;
 16         #address-cells = <2>;
 17         #size-cells = <2>;
 18 
 19         chosen { };
 20 
 21         clocks {
 22                 xo_board: xo-board {
 23                         compatible = "fixed-clock";
 24                         #clock-cells = <0>;
 25                         clock-frequency = <19200000>;
 26                 };
 27 
 28                 sleep_clk: sleep-clk {
 29                         compatible = "fixed-clock";
 30                         #clock-cells = <0>;
 31                         clock-frequency = <32000>;
 32                         clock-output-names = "sleep_clk";
 33                 };
 34         };
 35 
 36         cpus {
 37                 #address-cells = <2>;
 38                 #size-cells = <0>;
 39 
 40                 CPU0: cpu@0 {
 41                         device_type = "cpu";
 42                         compatible = "qcom,kryo260";
 43                         reg = <0x0 0x0>;
 44                         enable-method = "psci";
 45                         capacity-dmips-mhz = <1024>;
 46                         next-level-cache = <&L2_0>;
 47                         L2_0: l2-cache {
 48                                 compatible = "cache";
 49                                 cache-level = <2>;
 50                                 cache-unified;
 51                         };
 52                 };
 53 
 54                 CPU1: cpu@1 {
 55                         device_type = "cpu";
 56                         compatible = "qcom,kryo260";
 57                         reg = <0x0 0x1>;
 58                         enable-method = "psci";
 59                         capacity-dmips-mhz = <1024>;
 60                         next-level-cache = <&L2_0>;
 61                 };
 62 
 63                 CPU2: cpu@2 {
 64                         device_type = "cpu";
 65                         compatible = "qcom,kryo260";
 66                         reg = <0x0 0x2>;
 67                         enable-method = "psci";
 68                         capacity-dmips-mhz = <1024>;
 69                         next-level-cache = <&L2_0>;
 70                 };
 71 
 72                 CPU3: cpu@3 {
 73                         device_type = "cpu";
 74                         compatible = "qcom,kryo260";
 75                         reg = <0x0 0x3>;
 76                         enable-method = "psci";
 77                         capacity-dmips-mhz = <1024>;
 78                         next-level-cache = <&L2_0>;
 79                 };
 80 
 81                 CPU4: cpu@100 {
 82                         device_type = "cpu";
 83                         compatible = "qcom,kryo260";
 84                         reg = <0x0 0x100>;
 85                         enable-method = "psci";
 86                         capacity-dmips-mhz = <1638>;
 87                         next-level-cache = <&L2_1>;
 88                         L2_1: l2-cache {
 89                                 compatible = "cache";
 90                                 cache-level = <2>;
 91                                 cache-unified;
 92                         };
 93                 };
 94 
 95                 CPU5: cpu@101 {
 96                         device_type = "cpu";
 97                         compatible = "qcom,kryo260";
 98                         reg = <0x0 0x101>;
 99                         enable-method = "psci";
100                         capacity-dmips-mhz = <1638>;
101                         next-level-cache = <&L2_1>;
102                 };
103 
104                 CPU6: cpu@102 {
105                         device_type = "cpu";
106                         compatible = "qcom,kryo260";
107                         reg = <0x0 0x102>;
108                         enable-method = "psci";
109                         capacity-dmips-mhz = <1638>;
110                         next-level-cache = <&L2_1>;
111                 };
112 
113                 CPU7: cpu@103 {
114                         device_type = "cpu";
115                         compatible = "qcom,kryo260";
116                         reg = <0x0 0x103>;
117                         enable-method = "psci";
118                         capacity-dmips-mhz = <1638>;
119                         next-level-cache = <&L2_1>;
120                 };
121 
122                 cpu-map {
123                         cluster0 {
124                                 core0 {
125                                         cpu = <&CPU0>;
126                                 };
127 
128                                 core1 {
129                                         cpu = <&CPU1>;
130                                 };
131 
132                                 core2 {
133                                         cpu = <&CPU2>;
134                                 };
135 
136                                 core3 {
137                                         cpu = <&CPU3>;
138                                 };
139                         };
140 
141                         cluster1 {
142                                 core0 {
143                                         cpu = <&CPU4>;
144                                 };
145 
146                                 core1 {
147                                         cpu = <&CPU5>;
148                                 };
149 
150                                 core2 {
151                                         cpu = <&CPU6>;
152                                 };
153 
154                                 core3 {
155                                         cpu = <&CPU7>;
156                                 };
157                         };
158                 };
159         };
160 
161         firmware {
162                 scm: scm {
163                         compatible = "qcom,scm-sm6125", "qcom,scm";
164                         #reset-cells = <1>;
165                 };
166         };
167 
168         memory@40000000 {
169                 /* We expect the bootloader to fill in the size */
170                 reg = <0x0 0x40000000 0x0 0x0>;
171                 device_type = "memory";
172         };
173 
174         pmu {
175                 compatible = "arm,armv8-pmuv3";
176                 interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
177         };
178 
179         psci {
180                 compatible = "arm,psci-1.0";
181                 method = "smc";
182         };
183 
184         rpm: remoteproc {
185                 compatible = "qcom,sm6125-rpm-proc", "qcom,rpm-proc";
186 
187                 glink-edge {
188                         compatible = "qcom,glink-rpm";
189 
190                         interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
191                         qcom,rpm-msg-ram = <&rpm_msg_ram>;
192                         mboxes = <&apcs_glb 0>;
193 
194                         rpm_requests: rpm-requests {
195                                 compatible = "qcom,rpm-sm6125", "qcom,glink-smd-rpm";
196                                 qcom,glink-channels = "rpm_requests";
197 
198                                 rpmcc: clock-controller {
199                                         compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc";
200                                         #clock-cells = <1>;
201                                         clocks = <&xo_board>;
202                                         clock-names = "xo";
203                                 };
204 
205                                 rpmpd: power-controller {
206                                         compatible = "qcom,sm6125-rpmpd";
207                                         #power-domain-cells = <1>;
208                                         operating-points-v2 = <&rpmpd_opp_table>;
209 
210                                         rpmpd_opp_table: opp-table {
211                                                 compatible = "operating-points-v2";
212 
213                                                 rpmpd_opp_ret: opp1 {
214                                                         opp-level = <RPM_SMD_LEVEL_RETENTION>;
215                                                 };
216 
217                                                 rpmpd_opp_ret_plus: opp2 {
218                                                         opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
219                                                 };
220 
221                                                 rpmpd_opp_min_svs: opp3 {
222                                                         opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
223                                                 };
224 
225                                                 rpmpd_opp_low_svs: opp4 {
226                                                         opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
227                                                 };
228 
229                                                 rpmpd_opp_svs: opp5 {
230                                                         opp-level = <RPM_SMD_LEVEL_SVS>;
231                                                 };
232 
233                                                 rpmpd_opp_svs_plus: opp6 {
234                                                         opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
235                                                 };
236 
237                                                 rpmpd_opp_nom: opp7 {
238                                                         opp-level = <RPM_SMD_LEVEL_NOM>;
239                                                 };
240 
241                                                 rpmpd_opp_nom_plus: opp8 {
242                                                         opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
243                                                 };
244 
245                                                 rpmpd_opp_turbo: opp9 {
246                                                         opp-level = <RPM_SMD_LEVEL_TURBO>;
247                                                 };
248 
249                                                 rpmpd_opp_turbo_no_cpr: opp10 {
250                                                         opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
251                                                 };
252                                         };
253                                 };
254                         };
255                 };
256         };
257 
258         reserved_memory: reserved-memory {
259                 #address-cells = <2>;
260                 #size-cells = <2>;
261                 ranges;
262 
263                 hyp_mem: memory@45700000 {
264                         reg = <0x0 0x45700000 0x0 0x600000>;
265                         no-map;
266                 };
267 
268                 xbl_aop_mem: memory@45e00000 {
269                         reg = <0x0 0x45e00000 0x0 0x140000>;
270                         no-map;
271                 };
272 
273                 sec_apps_mem: memory@45fff000 {
274                         reg = <0x0 0x45fff000 0x0 0x1000>;
275                         no-map;
276                 };
277 
278                 smem_mem: memory@46000000 {
279                         reg = <0x0 0x46000000 0x0 0x200000>;
280                         no-map;
281                 };
282 
283                 reserved_mem1: memory@46200000 {
284                         reg = <0x0 0x46200000 0x0 0x2d00000>;
285                         no-map;
286                 };
287 
288                 camera_mem: memory@4ab00000 {
289                         reg = <0x0 0x4ab00000 0x0 0x500000>;
290                         no-map;
291                 };
292 
293                 modem_mem: memory@4b000000 {
294                         reg = <0x0 0x4b000000 0x0 0x7e00000>;
295                         no-map;
296                 };
297 
298                 venus_mem: memory@52e00000 {
299                         reg = <0x0 0x52e00000 0x0 0x500000>;
300                         no-map;
301                 };
302 
303                 wlan_msa_mem: memory@53300000 {
304                         reg = <0x0 0x53300000 0x0 0x200000>;
305                         no-map;
306                 };
307 
308                 cdsp_mem: memory@53500000 {
309                         reg = <0x0 0x53500000 0x0 0x1e00000>;
310                         no-map;
311                 };
312 
313                 adsp_pil_mem: memory@55300000 {
314                         reg = <0x0 0x55300000 0x0 0x1e00000>;
315                         no-map;
316                 };
317 
318                 ipa_fw_mem: memory@57100000 {
319                         reg = <0x0 0x57100000 0x0 0x10000>;
320                         no-map;
321                 };
322 
323                 ipa_gsi_mem: memory@57110000 {
324                         reg = <0x0 0x57110000 0x0 0x5000>;
325                         no-map;
326                 };
327 
328                 gpu_mem: memory@57115000 {
329                         reg = <0x0 0x57115000 0x0 0x2000>;
330                         no-map;
331                 };
332 
333                 cont_splash_mem: memory@5c000000 {
334                         reg = <0x0 0x5c000000 0x0 0x00f00000>;
335                         no-map;
336                 };
337 
338                 dfps_data_mem: memory@5cf00000 {
339                         reg = <0x0 0x5cf00000 0x0 0x0100000>;
340                         no-map;
341                 };
342 
343                 cdsp_sec_mem: memory@5f800000 {
344                         reg = <0x0 0x5f800000 0x0 0x1e00000>;
345                         no-map;
346                 };
347 
348                 qseecom_mem: memory@5e400000 {
349                         reg = <0x0 0x5e400000 0x0 0x1400000>;
350                         no-map;
351                 };
352 
353                 sdsp_mem: memory@f3000000 {
354                         reg = <0x0 0xf3000000 0x0 0x400000>;
355                         no-map;
356                 };
357 
358                 adsp_mem: memory@f3400000 {
359                         reg = <0x0 0xf3400000 0x0 0x800000>;
360                         no-map;
361                 };
362 
363                 qseecom_ta_mem: memory@13fc00000 {
364                         reg = <0x1 0x3fc00000 0x0 0x400000>;
365                         no-map;
366                 };
367         };
368 
369         smem: smem {
370                 compatible = "qcom,smem";
371                 memory-region = <&smem_mem>;
372                 hwlocks = <&tcsr_mutex 3>;
373         };
374 
375         soc@0 {
376                 #address-cells = <1>;
377                 #size-cells = <1>;
378                 ranges = <0x00 0x00 0x00 0xffffffff>;
379                 compatible = "simple-bus";
380 
381                 tcsr_mutex: hwlock@340000 {
382                         compatible = "qcom,tcsr-mutex";
383                         reg = <0x00340000 0x20000>;
384                         #hwlock-cells = <1>;
385                 };
386 
387                 tlmm: pinctrl@500000 {
388                         compatible = "qcom,sm6125-tlmm";
389                         reg = <0x00500000 0x400000>,
390                               <0x00900000 0x400000>,
391                               <0x00d00000 0x400000>;
392                         reg-names = "west", "south", "east";
393                         interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
394                         gpio-controller;
395                         gpio-ranges = <&tlmm 0 0 134>;
396                         #gpio-cells = <2>;
397                         interrupt-controller;
398                         #interrupt-cells = <2>;
399 
400                         sdc2_off_state: sdc2-off-state {
401                                 clk-pins {
402                                         pins = "sdc2_clk";
403                                         drive-strength = <2>;
404                                         bias-disable;
405                                 };
406 
407                                 cmd-pins {
408                                         pins = "sdc2_cmd";
409                                         drive-strength = <2>;
410                                         bias-pull-up;
411                                 };
412 
413                                 data-pins {
414                                         pins = "sdc2_data";
415                                         drive-strength = <2>;
416                                         bias-pull-up;
417                                 };
418                         };
419 
420                         sdc2_on_state: sdc2-on-state {
421                                 clk-pins {
422                                         pins = "sdc2_clk";
423                                         drive-strength = <16>;
424                                         bias-disable;
425                                 };
426 
427                                 cmd-pins {
428                                         pins = "sdc2_cmd";
429                                         drive-strength = <10>;
430                                         bias-pull-up;
431                                 };
432 
433                                 data-pins {
434                                         pins = "sdc2_data";
435                                         drive-strength = <10>;
436                                         bias-pull-up;
437                                 };
438                         };
439 
440                         qup_i2c0_default: qup-i2c0-default-state {
441                                 pins = "gpio0", "gpio1";
442                                 function = "qup00";
443                                 drive-strength = <2>;
444                                 bias-disable;
445                         };
446 
447                         qup_i2c0_sleep: qup-i2c0-sleep-state {
448                                 pins = "gpio0", "gpio1";
449                                 function = "gpio";
450                                 drive-strength = <2>;
451                                 bias-pull-up;
452                         };
453 
454                         qup_i2c1_default: qup-i2c1-default-state {
455                                 pins = "gpio4", "gpio5";
456                                 function = "qup01";
457                                 drive-strength = <2>;
458                                 bias-disable;
459                         };
460 
461                         qup_i2c1_sleep: qup-i2c1-sleep-state {
462                                 pins = "gpio4", "gpio5";
463                                 function = "gpio";
464                                 drive-strength = <2>;
465                                 bias-pull-up;
466                         };
467 
468                         qup_i2c2_default: qup-i2c2-default-state {
469                                 pins = "gpio6", "gpio7";
470                                 function = "qup02";
471                                 drive-strength = <2>;
472                                 bias-disable;
473                         };
474 
475                         qup_i2c2_sleep: qup-i2c2-sleep-state {
476                                 pins = "gpio6", "gpio7";
477                                 function = "gpio";
478                                 drive-strength = <2>;
479                                 bias-pull-up;
480                         };
481 
482                         qup_i2c3_default: qup-i2c3-default-state {
483                                 pins = "gpio14", "gpio15";
484                                 function = "qup03";
485                                 drive-strength = <2>;
486                                 bias-disable;
487                         };
488 
489                         qup_i2c3_sleep: qup-i2c3-sleep-state {
490                                 pins = "gpio14", "gpio15";
491                                 function = "gpio";
492                                 drive-strength = <2>;
493                                 bias-pull-up;
494                         };
495 
496                         qup_i2c4_default: qup-i2c4-default-state {
497                                 pins = "gpio16", "gpio17";
498                                 function = "qup04";
499                                 drive-strength = <2>;
500                                 bias-disable;
501                         };
502 
503                         qup_i2c4_sleep: qup-i2c4-sleep-state {
504                                 pins = "gpio16", "gpio17";
505                                 function = "gpio";
506                                 drive-strength = <2>;
507                                 bias-pull-up;
508                         };
509 
510                         qup_i2c5_default: qup-i2c5-default-state {
511                                 pins = "gpio22", "gpio23";
512                                 function = "qup10";
513                                 drive-strength = <2>;
514                                 bias-disable;
515                         };
516 
517                         qup_i2c5_sleep: qup-i2c5-sleep-state {
518                                 pins = "gpio22", "gpio23";
519                                 function = "gpio";
520                                 drive-strength = <2>;
521                                 bias-pull-up;
522                         };
523 
524                         qup_i2c6_default: qup-i2c6-default-state {
525                                 pins = "gpio30", "gpio31";
526                                 function = "qup11";
527                                 drive-strength = <2>;
528                                 bias-disable;
529                         };
530 
531                         qup_i2c6_sleep: qup-i2c6-sleep-state {
532                                 pins = "gpio30", "gpio31";
533                                 function = "gpio";
534                                 drive-strength = <2>;
535                                 bias-pull-up;
536                         };
537 
538                         qup_i2c7_default: qup-i2c7-default-state {
539                                 pins = "gpio28", "gpio29";
540                                 function = "qup12";
541                                 drive-strength = <2>;
542                                 bias-disable;
543                         };
544 
545                         qup_i2c7_sleep: qup-i2c7-sleep-state {
546                                 pins = "gpio28", "gpio29";
547                                 function = "gpio";
548                                 drive-strength = <2>;
549                                 bias-pull-up;
550                         };
551 
552                         qup_i2c8_default: qup-i2c8-default-state {
553                                 pins = "gpio18", "gpio19";
554                                 function = "qup13";
555                                 drive-strength = <2>;
556                                 bias-disable;
557                         };
558 
559                         qup_i2c8_sleep: qup-i2c8-sleep-state {
560                                 pins = "gpio18", "gpio19";
561                                 function = "gpio";
562                                 drive-strength = <2>;
563                                 bias-pull-up;
564                         };
565 
566                         qup_i2c9_default: qup-i2c9-default-state {
567                                 pins = "gpio10", "gpio11";
568                                 function = "qup14";
569                                 drive-strength = <2>;
570                                 bias-disable;
571                         };
572 
573                         qup_i2c9_sleep: qup-i2c9-sleep-state {
574                                 pins = "gpio10", "gpio11";
575                                 function = "gpio";
576                                 drive-strength = <2>;
577                                 bias-pull-up;
578                         };
579 
580                         qup_spi0_default: qup-spi0-default-state {
581                                 pins = "gpio0", "gpio1", "gpio2", "gpio3";
582                                 function = "qup00";
583                                 drive-strength = <6>;
584                                 bias-disable;
585                         };
586 
587                         qup_spi0_sleep: qup-spi0-sleep-state {
588                                 pins = "gpio0", "gpio1", "gpio2", "gpio3";
589                                 function = "gpio";
590                                 drive-strength = <6>;
591                                 bias-disable;
592                         };
593 
594                         qup_spi2_default: qup-spi2-default-state {
595                                 pins = "gpio6", "gpio7", "gpio8", "gpio9";
596                                 function = "qup02";
597                                 drive-strength = <6>;
598                                 bias-disable;
599                         };
600 
601                         qup_spi2_sleep: qup-spi2-sleep-state {
602                                 pins = "gpio6", "gpio7", "gpio8", "gpio9";
603                                 function = "gpio";
604                                 drive-strength = <6>;
605                                 bias-disable;
606                         };
607 
608                         qup_spi5_default: qup-spi5-default-state {
609                                 pins = "gpio22", "gpio23", "gpio24", "gpio25";
610                                 function = "qup10";
611                                 drive-strength = <6>;
612                                 bias-disable;
613                         };
614 
615                         qup_spi5_sleep: qup-spi5-sleep-state {
616                                 pins = "gpio22", "gpio23", "gpio24", "gpio25";
617                                 function = "gpio";
618                                 drive-strength = <6>;
619                                 bias-disable;
620                         };
621 
622                         qup_spi6_default: qup-spi6-default-state {
623                                 pins = "gpio30", "gpio31", "gpio32", "gpio33";
624                                 function = "qup11";
625                                 drive-strength = <6>;
626                                 bias-disable;
627                         };
628 
629                         qup_spi6_sleep: qup-spi6-sleep-state {
630                                 pins = "gpio30", "gpio31", "gpio32", "gpio33";
631                                 function = "gpio";
632                                 drive-strength = <6>;
633                                 bias-disable;
634                         };
635 
636                         qup_spi8_default: qup-spi8-default-state {
637                                 pins = "gpio18", "gpio19", "gpio20", "gpio21";
638                                 function = "qup13";
639                                 drive-strength = <6>;
640                                 bias-disable;
641                         };
642 
643                         qup_spi8_sleep: qup-spi8-sleep-state {
644                                 pins = "gpio18", "gpio19", "gpio20", "gpio21";
645                                 function = "gpio";
646                                 drive-strength = <6>;
647                                 bias-disable;
648                         };
649 
650                         qup_spi9_default: qup-spi9-default-state {
651                                 pins = "gpio10", "gpio11", "gpio12", "gpio13";
652                                 function = "qup14";
653                                 drive-strength = <6>;
654                                 bias-disable;
655                         };
656 
657                         qup_spi9_sleep: qup-spi9-sleep-state {
658                                 pins = "gpio10", "gpio11", "gpio12", "gpio13";
659                                 function = "gpio";
660                                 drive-strength = <6>;
661                                 bias-disable;
662                         };
663                 };
664 
665                 gcc: clock-controller@1400000 {
666                         compatible = "qcom,gcc-sm6125";
667                         reg = <0x01400000 0x1f0000>;
668                         #clock-cells = <1>;
669                         #reset-cells = <1>;
670                         #power-domain-cells = <1>;
671                         clock-names = "bi_tcxo", "sleep_clk";
672                         clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
673                 };
674 
675                 hsusb_phy1: phy@1613000 {
676                         compatible = "qcom,msm8996-qusb2-phy";
677                         reg = <0x01613000 0x180>;
678                         #phy-cells = <0>;
679 
680                         clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
681                                  <&rpmcc RPM_SMD_XO_CLK_SRC>;
682                         clock-names = "cfg_ahb", "ref";
683 
684                         resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
685                         status = "disabled";
686                 };
687 
688                 spmi_bus: spmi@1c40000 {
689                         compatible = "qcom,spmi-pmic-arb";
690                         reg = <0x01c40000 0x1100>,
691                               <0x01e00000 0x2000000>,
692                               <0x03e00000 0x100000>,
693                               <0x03f00000 0xa0000>,
694                               <0x01c0a000 0x26000>;
695                         reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
696                         interrupt-names = "periph_irq";
697                         interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
698                         qcom,ee = <0>;
699                         qcom,channel = <0>;
700                         #address-cells = <2>;
701                         #size-cells = <0>;
702                         interrupt-controller;
703                         #interrupt-cells = <4>;
704                 };
705 
706                 rpm_msg_ram: sram@45f0000 {
707                         compatible = "qcom,rpm-msg-ram";
708                         reg = <0x045f0000 0x7000>;
709                 };
710 
711                 sdhc_1: mmc@4744000 {
712                         compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
713                         reg = <0x04744000 0x1000>, <0x04745000 0x1000>;
714                         reg-names = "hc", "cqhci";
715 
716                         interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
717                                      <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
718                         interrupt-names = "hc_irq", "pwr_irq";
719 
720                         clocks = <&gcc GCC_SDCC1_AHB_CLK>,
721                                  <&gcc GCC_SDCC1_APPS_CLK>,
722                                  <&rpmcc RPM_SMD_XO_CLK_SRC>;
723                         clock-names = "iface", "core", "xo";
724                         iommus = <&apps_smmu 0x160 0x0>;
725 
726                         power-domains = <&rpmpd SM6125_VDDCX>;
727 
728                         qcom,dll-config = <0x000f642c>;
729                         qcom,ddr-config = <0x80040873>;
730 
731                         bus-width = <8>;
732                         non-removable;
733                         supports-cqe;
734 
735                         status = "disabled";
736                 };
737 
738                 sdhc_2: mmc@4784000 {
739                         compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
740                         reg = <0x04784000 0x1000>;
741                         reg-names = "hc";
742 
743                         interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
744                                      <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
745                         interrupt-names = "hc_irq", "pwr_irq";
746 
747                         clocks = <&gcc GCC_SDCC2_AHB_CLK>,
748                                  <&gcc GCC_SDCC2_APPS_CLK>,
749                                  <&rpmcc RPM_SMD_XO_CLK_SRC>;
750                         clock-names = "iface", "core", "xo";
751                         iommus = <&apps_smmu 0x180 0x0>;
752 
753                         pinctrl-0 = <&sdc2_on_state>;
754                         pinctrl-1 = <&sdc2_off_state>;
755                         pinctrl-names = "default", "sleep";
756 
757                         power-domains = <&rpmpd SM6125_VDDCX>;
758 
759                         qcom,dll-config = <0x0007642c>;
760                         qcom,ddr-config = <0x80040873>;
761 
762                         bus-width = <4>;
763                         status = "disabled";
764                 };
765 
766                 ufs_mem_hc: ufs@4804000 {
767                         compatible = "qcom,sm6125-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
768                         reg = <0x04804000 0x3000>, <0x04810000 0x8000>;
769                         reg-names = "std", "ice";
770                         interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
771 
772                         clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
773                                  <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
774                                  <&gcc GCC_UFS_PHY_AHB_CLK>,
775                                  <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
776                                  <&rpmcc RPM_SMD_XO_CLK_SRC>,
777                                  <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
778                                  <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
779                                  <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
780                         clock-names = "core_clk",
781                                       "bus_aggr_clk",
782                                       "iface_clk",
783                                       "core_clk_unipro",
784                                       "ref_clk",
785                                       "tx_lane0_sync_clk",
786                                       "rx_lane0_sync_clk",
787                                       "ice_core_clk";
788                         freq-table-hz = <50000000 240000000>,
789                                         <0 0>,
790                                         <0 0>,
791                                         <37500000 150000000>,
792                                         <0 0>,
793                                         <0 0>,
794                                         <0 0>,
795                                         <75000000 300000000>;
796 
797                         resets = <&gcc GCC_UFS_PHY_BCR>;
798                         reset-names = "rst";
799                         #reset-cells = <1>;
800 
801                         phys = <&ufs_mem_phy>;
802                         phy-names = "ufsphy";
803 
804                         lanes-per-direction = <1>;
805 
806                         iommus = <&apps_smmu 0x200 0x0>;
807 
808                         status = "disabled";
809                 };
810 
811                 ufs_mem_phy: phy@4807000 {
812                         compatible = "qcom,sm6125-qmp-ufs-phy";
813                         reg = <0x04807000 0xdb8>;
814 
815                         clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
816                                  <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
817                                  <&gcc GCC_UFS_MEM_CLKREF_CLK>;
818                         clock-names = "ref",
819                                       "ref_aux",
820                                       "qref";
821 
822                         resets = <&ufs_mem_hc 0>;
823                         reset-names = "ufsphy";
824 
825                         power-domains = <&gcc UFS_PHY_GDSC>;
826 
827                         #phy-cells = <0>;
828 
829                         status = "disabled";
830                 };
831 
832                 gpi_dma0: dma-controller@4a00000 {
833                         compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma";
834                         reg = <0x04a00000 0x60000>;
835                         interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
836                                      <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
837                                      <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
838                                      <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
839                                      <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
840                                      <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
841                                      <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
842                                      <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
843                         dma-channels = <8>;
844                         dma-channel-mask = <0x1f>;
845                         iommus = <&apps_smmu 0x136 0x0>;
846                         #dma-cells = <3>;
847                         status = "disabled";
848                 };
849 
850                 qupv3_id_0: geniqup@4ac0000 {
851                         compatible = "qcom,geni-se-qup";
852                         reg = <0x04ac0000 0x2000>;
853                         clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
854                                  <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
855                         clock-names = "m-ahb", "s-ahb";
856                         iommus = <&apps_smmu 0x123 0x0>;
857                         #address-cells = <1>;
858                         #size-cells = <1>;
859                         ranges;
860                         status = "disabled";
861 
862                         i2c0: i2c@4a80000 {
863                                 compatible = "qcom,geni-i2c";
864                                 reg = <0x04a80000 0x4000>;
865                                 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
866                                 clock-names = "se";
867                                 interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
868                                 pinctrl-0 = <&qup_i2c0_default>;
869                                 pinctrl-1 = <&qup_i2c0_sleep>;
870                                 pinctrl-names = "default", "sleep";
871                                 dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
872                                        <&gpi_dma0 1 0 QCOM_GPI_I2C>;
873                                 dma-names = "tx", "rx";
874                                 #address-cells = <1>;
875                                 #size-cells = <0>;
876                                 status = "disabled";
877                         };
878 
879                         spi0: spi@4a80000 {
880                                 compatible = "qcom,geni-spi";
881                                 reg = <0x04a80000 0x4000>;
882                                 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
883                                 clock-names = "se";
884                                 interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
885                                 pinctrl-0 = <&qup_spi0_default>;
886                                 pinctrl-1 = <&qup_spi0_sleep>;
887                                 pinctrl-names = "default", "sleep";
888                                 dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
889                                        <&gpi_dma0 1 0 QCOM_GPI_SPI>;
890                                 dma-names = "tx", "rx";
891                                 #address-cells = <1>;
892                                 #size-cells = <0>;
893                                 status = "disabled";
894                         };
895 
896                         i2c1: i2c@4a84000 {
897                                 compatible = "qcom,geni-i2c";
898                                 reg = <0x04a84000 0x4000>;
899                                 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
900                                 clock-names = "se";
901                                 interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
902                                 pinctrl-0 = <&qup_i2c1_default>;
903                                 pinctrl-1 = <&qup_i2c1_sleep>;
904                                 pinctrl-names = "default", "sleep";
905                                 dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
906                                        <&gpi_dma0 1 1 QCOM_GPI_I2C>;
907                                 dma-names = "tx", "rx";
908                                 #address-cells = <1>;
909                                 #size-cells = <0>;
910                                 status = "disabled";
911                         };
912 
913                         i2c2: i2c@4a88000 {
914                                 compatible = "qcom,geni-i2c";
915                                 reg = <0x04a88000 0x4000>;
916                                 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
917                                 clock-names = "se";
918                                 interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
919                                 pinctrl-0 = <&qup_i2c2_default>;
920                                 pinctrl-1 = <&qup_i2c2_sleep>;
921                                 pinctrl-names = "default", "sleep";
922                                 dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
923                                        <&gpi_dma0 1 2 QCOM_GPI_I2C>;
924                                 dma-names = "tx", "rx";
925                                 #address-cells = <1>;
926                                 #size-cells = <0>;
927                                 status = "disabled";
928                         };
929 
930                         spi2: spi@4a88000 {
931                                 compatible = "qcom,geni-spi";
932                                 reg = <0x04a88000 0x4000>;
933                                 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
934                                 clock-names = "se";
935                                 interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
936                                 pinctrl-0 = <&qup_spi2_default>;
937                                 pinctrl-1 = <&qup_spi2_sleep>;
938                                 pinctrl-names = "default", "sleep";
939                                 dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
940                                        <&gpi_dma0 1 2 QCOM_GPI_SPI>;
941                                 dma-names = "tx", "rx";
942                                 #address-cells = <1>;
943                                 #size-cells = <0>;
944                                 status = "disabled";
945                         };
946 
947                         i2c3: i2c@4a8c000 {
948                                 compatible = "qcom,geni-i2c";
949                                 reg = <0x04a8c000 0x4000>;
950                                 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
951                                 clock-names = "se";
952                                 interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
953                                 pinctrl-0 = <&qup_i2c3_default>;
954                                 pinctrl-1 = <&qup_i2c3_sleep>;
955                                 pinctrl-names = "default", "sleep";
956                                 dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
957                                        <&gpi_dma0 1 3 QCOM_GPI_I2C>;
958                                 dma-names = "tx", "rx";
959                                 #address-cells = <1>;
960                                 #size-cells = <0>;
961                                 status = "disabled";
962                         };
963 
964                         i2c4: i2c@4a90000 {
965                                 compatible = "qcom,geni-i2c";
966                                 reg = <0x04a90000 0x4000>;
967                                 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
968                                 clock-names = "se";
969                                 interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
970                                 pinctrl-0 = <&qup_i2c4_default>;
971                                 pinctrl-1 = <&qup_i2c4_sleep>;
972                                 pinctrl-names = "default", "sleep";
973                                 dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
974                                        <&gpi_dma0 1 4 QCOM_GPI_I2C>;
975                                 dma-names = "tx", "rx";
976                                 #address-cells = <1>;
977                                 #size-cells = <0>;
978                                 status = "disabled";
979                         };
980                 };
981 
982                 gpi_dma1: dma-controller@4c00000 {
983                         compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma";
984                         reg = <0x04c00000 0x60000>;
985                         interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
986                                      <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
987                                      <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
988                                      <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
989                                      <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
990                                      <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
991                                      <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
992                                      <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
993                         dma-channels = <8>;
994                         dma-channel-mask = <0x0f>;
995                         iommus = <&apps_smmu 0x156 0x0>;
996                         #dma-cells = <3>;
997                         status = "disabled";
998                 };
999 
1000                 qupv3_id_1: geniqup@4cc0000 {
1001                         compatible = "qcom,geni-se-qup";
1002                         reg = <0x04cc0000 0x2000>;
1003                         clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
1004                                  <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
1005                         clock-names = "m-ahb", "s-ahb";
1006                         iommus = <&apps_smmu 0x143 0x0>;
1007                         #address-cells = <1>;
1008                         #size-cells = <1>;
1009                         ranges;
1010                         status = "disabled";
1011 
1012                         i2c5: i2c@4c80000 {
1013                                 compatible = "qcom,geni-i2c";
1014                                 reg = <0x04c80000 0x4000>;
1015                                 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1016                                 clock-names = "se";
1017                                 interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
1018                                 pinctrl-0 = <&qup_i2c5_default>;
1019                                 pinctrl-1 = <&qup_i2c5_sleep>;
1020                                 pinctrl-names = "default", "sleep";
1021                                 dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
1022                                        <&gpi_dma1 1 0 QCOM_GPI_I2C>;
1023                                 dma-names = "tx", "rx";
1024                                 #address-cells = <1>;
1025                                 #size-cells = <0>;
1026                                 status = "disabled";
1027                         };
1028 
1029                         spi5: spi@4c80000 {
1030                                 compatible = "qcom,geni-spi";
1031                                 reg = <0x04c80000 0x4000>;
1032                                 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1033                                 clock-names = "se";
1034                                 interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
1035                                 pinctrl-0 = <&qup_spi5_default>;
1036                                 pinctrl-1 = <&qup_spi5_sleep>;
1037                                 pinctrl-names = "default", "sleep";
1038                                 dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
1039                                        <&gpi_dma1 1 0 QCOM_GPI_SPI>;
1040                                 dma-names = "tx", "rx";
1041                                 #address-cells = <1>;
1042                                 #size-cells = <0>;
1043                                 status = "disabled";
1044                         };
1045 
1046                         i2c6: i2c@4c84000 {
1047                                 compatible = "qcom,geni-i2c";
1048                                 reg = <0x04c84000 0x4000>;
1049                                 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1050                                 clock-names = "se";
1051                                 interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
1052                                 pinctrl-0 = <&qup_i2c6_default>;
1053                                 pinctrl-1 = <&qup_i2c6_sleep>;
1054                                 pinctrl-names = "default", "sleep";
1055                                 dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
1056                                        <&gpi_dma1 1 1 QCOM_GPI_I2C>;
1057                                 dma-names = "tx", "rx";
1058                                 #address-cells = <1>;
1059                                 #size-cells = <0>;
1060                                 status = "disabled";
1061                         };
1062 
1063                         spi6: spi@4c84000 {
1064                                 compatible = "qcom,geni-spi";
1065                                 reg = <0x04c84000 0x4000>;
1066                                 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1067                                 clock-names = "se";
1068                                 interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
1069                                 pinctrl-0 = <&qup_spi6_default>;
1070                                 pinctrl-1 = <&qup_spi6_sleep>;
1071                                 pinctrl-names = "default", "sleep";
1072                                 dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
1073                                        <&gpi_dma1 1 1 QCOM_GPI_SPI>;
1074                                 dma-names = "tx", "rx";
1075                                 #address-cells = <1>;
1076                                 #size-cells = <0>;
1077                                 status = "disabled";
1078                         };
1079 
1080                         i2c7: i2c@4c88000 {
1081                                 compatible = "qcom,geni-i2c";
1082                                 reg = <0x04c88000 0x4000>;
1083                                 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1084                                 clock-names = "se";
1085                                 interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
1086                                 pinctrl-0 = <&qup_i2c7_default>;
1087                                 pinctrl-1 = <&qup_i2c7_sleep>;
1088                                 pinctrl-names = "default", "sleep";
1089                                 dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
1090                                        <&gpi_dma1 1 2 QCOM_GPI_I2C>;
1091                                 dma-names = "tx", "rx";
1092                                 #address-cells = <1>;
1093                                 #size-cells = <0>;
1094                                 status = "disabled";
1095                         };
1096 
1097                         i2c8: i2c@4c8c000 {
1098                                 compatible = "qcom,geni-i2c";
1099                                 reg = <0x04c8c000 0x4000>;
1100                                 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1101                                 clock-names = "se";
1102                                 interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
1103                                 pinctrl-0 = <&qup_i2c8_default>;
1104                                 pinctrl-1 = <&qup_i2c8_sleep>;
1105                                 pinctrl-names = "default", "sleep";
1106                                 dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
1107                                        <&gpi_dma1 1 3 QCOM_GPI_I2C>;
1108                                 dma-names = "tx", "rx";
1109                                 #address-cells = <1>;
1110                                 #size-cells = <0>;
1111                                 status = "disabled";
1112                         };
1113 
1114                         spi8: spi@4c8c000 {
1115                                 compatible = "qcom,geni-spi";
1116                                 reg = <0x04c8c000 0x4000>;
1117                                 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1118                                 clock-names = "se";
1119                                 interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
1120                                 pinctrl-0 = <&qup_spi8_default>;
1121                                 pinctrl-1 = <&qup_spi8_sleep>;
1122                                 pinctrl-names = "default", "sleep";
1123                                 dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
1124                                        <&gpi_dma1 1 3 QCOM_GPI_SPI>;
1125                                 dma-names = "tx", "rx";
1126                                 #address-cells = <1>;
1127                                 #size-cells = <0>;
1128                                 status = "disabled";
1129                         };
1130 
1131                         i2c9: i2c@4c90000 {
1132                                 compatible = "qcom,geni-i2c";
1133                                 reg = <0x04c90000 0x4000>;
1134                                 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1135                                 clock-names = "se";
1136                                 interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
1137                                 pinctrl-0 = <&qup_i2c9_default>;
1138                                 pinctrl-1 = <&qup_i2c9_sleep>;
1139                                 pinctrl-names = "default", "sleep";
1140                                 dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
1141                                        <&gpi_dma1 1 4 QCOM_GPI_I2C>;
1142                                 dma-names = "tx", "rx";
1143                                 #address-cells = <1>;
1144                                 #size-cells = <0>;
1145                                 status = "disabled";
1146                         };
1147 
1148                         spi9: spi@4c90000 {
1149                                 compatible = "qcom,geni-spi";
1150                                 reg = <0x04c90000 0x4000>;
1151                                 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1152                                 clock-names = "se";
1153                                 interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
1154                                 pinctrl-0 = <&qup_spi9_default>;
1155                                 pinctrl-1 = <&qup_spi9_sleep>;
1156                                 pinctrl-names = "default", "sleep";
1157                                 dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
1158                                        <&gpi_dma1 1 4 QCOM_GPI_SPI>;
1159                                 dma-names = "tx", "rx";
1160                                 #address-cells = <1>;
1161                                 #size-cells = <0>;
1162                                 status = "disabled";
1163                         };
1164                 };
1165 
1166                 usb3: usb@4ef8800 {
1167                         compatible = "qcom,sm6125-dwc3", "qcom,dwc3";
1168                         reg = <0x04ef8800 0x400>;
1169                         #address-cells = <1>;
1170                         #size-cells = <1>;
1171                         ranges;
1172 
1173                         clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
1174                                  <&gcc GCC_USB30_PRIM_MASTER_CLK>,
1175                                  <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
1176                                  <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
1177                                  <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
1178                                  <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
1179                         clock-names = "cfg_noc",
1180                                       "core",
1181                                       "iface",
1182                                       "sleep",
1183                                       "mock_utmi",
1184                                       "xo";
1185 
1186                         assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
1187                                           <&gcc GCC_USB30_PRIM_MASTER_CLK>;
1188                         assigned-clock-rates = <19200000>, <66666667>;
1189 
1190                         interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
1191                                      <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
1192                                      <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
1193                                      <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
1194                         interrupt-names = "pwr_event",
1195                                           "qusb2_phy",
1196                                           "hs_phy_irq",
1197                                           "ss_phy_irq";
1198 
1199                         power-domains = <&gcc USB30_PRIM_GDSC>;
1200                         qcom,select-utmi-as-pipe-clk;
1201                         status = "disabled";
1202 
1203                         usb3_dwc3: usb@4e00000 {
1204                                 compatible = "snps,dwc3";
1205                                 reg = <0x04e00000 0xcd00>;
1206                                 interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
1207                                 iommus = <&apps_smmu 0x100 0x0>;
1208                                 phys = <&hsusb_phy1>;
1209                                 phy-names = "usb2-phy";
1210                                 snps,dis_u2_susphy_quirk;
1211                                 snps,dis_enblslpm_quirk;
1212                                 maximum-speed = "high-speed";
1213                                 dr_mode = "peripheral";
1214                         };
1215                 };
1216 
1217                 sram@4690000 {
1218                         compatible = "qcom,rpm-stats";
1219                         reg = <0x04690000 0x10000>;
1220                 };
1221 
1222                 mdss: display-subsystem@5e00000 {
1223                         compatible = "qcom,sm6125-mdss";
1224                         reg = <0x05e00000 0x1000>;
1225                         reg-names = "mdss";
1226 
1227                         interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
1228                         interrupt-controller;
1229                         #interrupt-cells = <1>;
1230 
1231                         clocks = <&gcc GCC_DISP_AHB_CLK>,
1232                                  <&dispcc DISP_CC_MDSS_AHB_CLK>,
1233                                  <&dispcc DISP_CC_MDSS_MDP_CLK>;
1234                         clock-names = "iface",
1235                                       "ahb",
1236                                       "core";
1237 
1238                         power-domains = <&dispcc MDSS_GDSC>;
1239 
1240                         iommus = <&apps_smmu 0x400 0x0>;
1241 
1242                         #address-cells = <1>;
1243                         #size-cells = <1>;
1244                         ranges;
1245 
1246                         status = "disabled";
1247 
1248                         mdss_mdp: display-controller@5e01000 {
1249                                 compatible = "qcom,sm6125-dpu";
1250                                 reg = <0x05e01000 0x83208>,
1251                                       <0x05eb0000 0x2008>;
1252                                 reg-names = "mdp", "vbif";
1253 
1254                                 interrupt-parent = <&mdss>;
1255                                 interrupts = <0>;
1256 
1257                                 clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
1258                                          <&dispcc DISP_CC_MDSS_AHB_CLK>,
1259                                          <&dispcc DISP_CC_MDSS_ROT_CLK>,
1260                                          <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
1261                                          <&dispcc DISP_CC_MDSS_MDP_CLK>,
1262                                          <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
1263                                          <&gcc GCC_DISP_THROTTLE_CORE_CLK>;
1264                                 clock-names = "bus",
1265                                               "iface",
1266                                               "rot",
1267                                               "lut",
1268                                               "core",
1269                                               "vsync",
1270                                               "throttle";
1271                                 assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
1272                                 assigned-clock-rates = <19200000>;
1273 
1274                                 operating-points-v2 = <&mdp_opp_table>;
1275                                 power-domains = <&rpmpd SM6125_VDDCX>;
1276 
1277                                 ports {
1278                                         #address-cells = <1>;
1279                                         #size-cells = <0>;
1280 
1281                                         port@0 {
1282                                                 reg = <0>;
1283                                                 dpu_intf1_out: endpoint {
1284                                                         remote-endpoint = <&mdss_dsi0_in>;
1285                                                 };
1286                                         };
1287                                 };
1288 
1289                                 mdp_opp_table: opp-table {
1290                                         compatible = "operating-points-v2";
1291 
1292                                         opp-192000000 {
1293                                                 opp-hz = /bits/ 64 <192000000>;
1294                                                 required-opps = <&rpmpd_opp_low_svs>;
1295                                         };
1296 
1297                                         opp-256000000 {
1298                                                 opp-hz = /bits/ 64 <256000000>;
1299                                                 required-opps = <&rpmpd_opp_svs>;
1300                                         };
1301 
1302                                         opp-307200000 {
1303                                                 opp-hz = /bits/ 64 <307200000>;
1304                                                 required-opps = <&rpmpd_opp_svs_plus>;
1305                                         };
1306 
1307                                         opp-384000000 {
1308                                                 opp-hz = /bits/ 64 <384000000>;
1309                                                 required-opps = <&rpmpd_opp_nom>;
1310                                         };
1311 
1312                                         opp-400000000 {
1313                                                 opp-hz = /bits/ 64 <400000000>;
1314                                                 required-opps = <&rpmpd_opp_turbo>;
1315                                         };
1316                                 };
1317                         };
1318 
1319                         mdss_dsi0: dsi@5e94000 {
1320                                 compatible = "qcom,sm6125-dsi-ctrl", "qcom,mdss-dsi-ctrl";
1321                                 reg = <0x05e94000 0x400>;
1322                                 reg-names = "dsi_ctrl";
1323 
1324                                 interrupt-parent = <&mdss>;
1325                                 interrupts = <4>;
1326 
1327                                 clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
1328                                          <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
1329                                          <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
1330                                          <&dispcc DISP_CC_MDSS_ESC0_CLK>,
1331                                          <&dispcc DISP_CC_MDSS_AHB_CLK>,
1332                                          <&gcc GCC_DISP_HF_AXI_CLK>;
1333                                 clock-names = "byte",
1334                                               "byte_intf",
1335                                               "pixel",
1336                                               "core",
1337                                               "iface",
1338                                               "bus";
1339                                 assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
1340                                                   <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
1341                                 assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
1342 
1343                                 operating-points-v2 = <&dsi_opp_table>;
1344                                 power-domains = <&rpmpd SM6125_VDDCX>;
1345 
1346                                 phys = <&mdss_dsi0_phy>;
1347                                 phy-names = "dsi";
1348 
1349                                 #address-cells = <1>;
1350                                 #size-cells = <0>;
1351 
1352                                 status = "disabled";
1353 
1354                                 ports {
1355                                         #address-cells = <1>;
1356                                         #size-cells = <0>;
1357 
1358                                         port@0 {
1359                                                 reg = <0>;
1360                                                 mdss_dsi0_in: endpoint {
1361                                                         remote-endpoint = <&dpu_intf1_out>;
1362                                                 };
1363                                         };
1364 
1365                                         port@1 {
1366                                                 reg = <1>;
1367                                                 mdss_dsi0_out: endpoint {
1368                                                 };
1369                                         };
1370                                 };
1371 
1372                                 dsi_opp_table: opp-table {
1373                                         compatible = "operating-points-v2";
1374 
1375                                         opp-164000000 {
1376                                                 opp-hz = /bits/ 64 <164000000>;
1377                                                 required-opps = <&rpmpd_opp_low_svs>;
1378                                         };
1379 
1380                                         opp-187500000 {
1381                                                 opp-hz = /bits/ 64 <187500000>;
1382                                                 required-opps = <&rpmpd_opp_svs>;
1383                                         };
1384                                 };
1385                         };
1386 
1387                         mdss_dsi0_phy: phy@5e94400 {
1388                                 compatible = "qcom,sm6125-dsi-phy-14nm";
1389                                 reg = <0x05e94400 0x100>,
1390                                       <0x05e94500 0x300>,
1391                                       <0x05e94800 0x188>;
1392                                 reg-names = "dsi_phy",
1393                                             "dsi_phy_lane",
1394                                             "dsi_pll";
1395 
1396                                 #clock-cells = <1>;
1397                                 #phy-cells = <0>;
1398 
1399                                 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
1400                                          <&rpmcc RPM_SMD_XO_CLK_SRC>;
1401                                 clock-names = "iface",
1402                                               "ref";
1403 
1404                                 required-opps = <&rpmpd_opp_nom>;
1405                                 power-domains = <&rpmpd SM6125_VDDMX>;
1406 
1407                                 status = "disabled";
1408                         };
1409                 };
1410 
1411                 dispcc: clock-controller@5f00000 {
1412                         compatible = "qcom,sm6125-dispcc";
1413                         reg = <0x05f00000 0x20000>;
1414 
1415                         clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
1416                                  <&mdss_dsi0_phy 0>,
1417                                  <&mdss_dsi0_phy 1>,
1418                                  <0>,
1419                                  <0>,
1420                                  <0>,
1421                                  <&gcc GCC_DISP_AHB_CLK>,
1422                                  <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
1423                         clock-names = "bi_tcxo",
1424                                       "dsi0_phy_pll_out_byteclk",
1425                                       "dsi0_phy_pll_out_dsiclk",
1426                                       "dsi1_phy_pll_out_dsiclk",
1427                                       "dp_phy_pll_link_clk",
1428                                       "dp_phy_pll_vco_div_clk",
1429                                       "cfg_ahb_clk",
1430                                       "gcc_disp_gpll0_div_clk_src";
1431 
1432                         required-opps = <&rpmpd_opp_ret>;
1433                         power-domains = <&rpmpd SM6125_VDDCX>;
1434 
1435                         #clock-cells = <1>;
1436                         #power-domain-cells = <1>;
1437                 };
1438 
1439                 apps_smmu: iommu@c600000 {
1440                         compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500";
1441                         reg = <0x0c600000 0x80000>;
1442                         interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
1443                                      <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
1444                                      <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
1445                                      <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
1446                                      <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
1447                                      <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
1448                                      <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
1449                                      <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
1450                                      <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
1451                                      <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
1452                                      <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
1453                                      <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
1454                                      <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
1455                                      <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
1456                                      <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
1457                                      <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
1458                                      <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
1459                                      <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
1460                                      <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
1461                                      <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
1462                                      <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
1463                                      <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
1464                                      <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
1465                                      <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
1466                                      <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
1467                                      <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
1468                                      <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
1469                                      <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
1470                                      <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
1471                                      <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
1472                                      <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
1473                                      <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
1474                                      <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
1475                                      <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
1476                                      <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
1477                                      <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
1478                                      <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
1479                                      <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
1480                                      <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
1481                                      <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
1482                                      <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
1483                                      <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
1484                                      <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
1485                                      <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
1486                                      <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
1487                                      <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
1488                                      <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
1489                                      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
1490                                      <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
1491                                      <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
1492                                      <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
1493                                      <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
1494                                      <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
1495                                      <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
1496                                      <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
1497                                      <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
1498                                      <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
1499                                      <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
1500                                      <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
1501                                      <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
1502                                      <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
1503                                      <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
1504                                      <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
1505                                      <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
1506                                      <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
1507 
1508                         #global-interrupts = <1>;
1509                         #iommu-cells = <2>;
1510                 };
1511 
1512                 apcs_glb: mailbox@f111000 {
1513                         compatible = "qcom,sm6125-apcs-hmss-global",
1514                                      "qcom,msm8994-apcs-kpss-global";
1515                         reg = <0x0f111000 0x1000>;
1516 
1517                         #mbox-cells = <1>;
1518                 };
1519 
1520                 timer@f120000 {
1521                         compatible = "arm,armv7-timer-mem";
1522                         #address-cells = <1>;
1523                         #size-cells = <1>;
1524                         ranges;
1525                         reg = <0x0f120000 0x1000>;
1526                         clock-frequency = <19200000>;
1527 
1528                         frame@f121000 {
1529                                 frame-number = <0>;
1530                                 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
1531                                              <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
1532                                 reg = <0x0f121000 0x1000>,
1533                                       <0x0f122000 0x1000>;
1534                         };
1535 
1536                         frame@f123000 {
1537                                 frame-number = <1>;
1538                                 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
1539                                 reg = <0x0f123000 0x1000>;
1540                                 status = "disabled";
1541                         };
1542 
1543                         frame@f124000 {
1544                                 frame-number = <2>;
1545                                 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
1546                                 reg = <0x0f124000 0x1000>;
1547                                 status = "disabled";
1548                         };
1549 
1550                         frame@f125000 {
1551                                 frame-number = <3>;
1552                                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
1553                                 reg = <0x0f125000 0x1000>;
1554                                 status = "disabled";
1555                         };
1556 
1557                         frame@f126000 {
1558                                 frame-number = <4>;
1559                                 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
1560                                 reg = <0x0f126000 0x1000>;
1561                                 status = "disabled";
1562                         };
1563 
1564                         frame@f127000 {
1565                                 frame-number = <5>;
1566                                 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
1567                                 reg = <0x0f127000 0x1000>;
1568                                 status = "disabled";
1569                         };
1570 
1571                         frame@f128000 {
1572                                 frame-number = <6>;
1573                                 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
1574                                 reg = <0x0f128000 0x1000>;
1575                                 status = "disabled";
1576                         };
1577                 };
1578 
1579                 intc: interrupt-controller@f200000 {
1580                         compatible = "arm,gic-v3";
1581                         reg = <0x0f200000 0x20000>,
1582                               <0x0f300000 0x100000>;
1583                         #interrupt-cells = <3>;
1584                         interrupt-controller;
1585                         interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
1586                 };
1587         };
1588 
1589         timer {
1590                 compatible = "arm,armv8-timer";
1591                 interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
1592                              <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
1593                              <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
1594                              <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
1595                 clock-frequency = <19200000>;
1596         };
1597 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php