1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2020, The Linux Foundation. All rights reserved.
4 */
5
6 /dts-v1/;
7
8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/usb/pd.h>
11 #include "sm8150.dtsi"
12 #include "pm8150.dtsi"
13 #include "pm8150b.dtsi"
14 #include "pm8150l.dtsi"
15
16 / {
17 model = "Qualcomm Technologies, Inc. SM8150 HDK";
18 compatible = "qcom,sm8150-hdk", "qcom,sm8150";
19 chassis-type = "embedded";
20
21 aliases {
22 serial0 = &uart2;
23 };
24
25 chosen {
26 stdout-path = "serial0:115200n8";
27 };
28
29 vph_pwr: vph-pwr-regulator {
30 compatible = "regulator-fixed";
31 regulator-name = "vph_pwr";
32 regulator-min-microvolt = <3700000>;
33 regulator-max-microvolt = <3700000>;
34 };
35
36 vreg_s4a_1p8: pm8150-s4 {
37 compatible = "regulator-fixed";
38 regulator-name = "vreg_s4a_1p8";
39
40 regulator-min-microvolt = <1800000>;
41 regulator-max-microvolt = <1800000>;
42
43 regulator-always-on;
44 regulator-boot-on;
45
46 vin-supply = <&vph_pwr>;
47 };
48
49 gpio-keys {
50 compatible = "gpio-keys";
51
52 key-vol-up {
53 label = "Volume Up";
54 linux,code = <KEY_VOLUMEUP>;
55 gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
56 };
57 };
58
59 hdmi-out {
60 compatible = "hdmi-connector";
61 type = "a";
62
63 port {
64 hdmi_con: endpoint {
65 remote-endpoint = <<9611_out>;
66 };
67 };
68 };
69 };
70
71 &apps_rsc {
72 regulators-0 {
73 compatible = "qcom,pm8150-rpmh-regulators";
74 qcom,pmic-id = "a";
75
76 vdd-s1-supply = <&vph_pwr>;
77 vdd-s2-supply = <&vph_pwr>;
78 vdd-s3-supply = <&vph_pwr>;
79 vdd-s4-supply = <&vph_pwr>;
80 vdd-s5-supply = <&vph_pwr>;
81 vdd-s6-supply = <&vph_pwr>;
82 vdd-s7-supply = <&vph_pwr>;
83 vdd-s8-supply = <&vph_pwr>;
84 vdd-s9-supply = <&vph_pwr>;
85 vdd-s10-supply = <&vph_pwr>;
86
87 vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
88 vdd-l2-l10-supply = <&vreg_bob>;
89 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>;
90 vdd-l6-l9-supply = <&vreg_s8c_1p3>;
91 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
92 vdd-l13-l16-l17-supply = <&vreg_bob>;
93
94 vreg_s5a_2p0: smps5 {
95 regulator-min-microvolt = <1904000>;
96 regulator-max-microvolt = <2000000>;
97 };
98
99 vreg_s6a_0p9: smps6 {
100 regulator-min-microvolt = <920000>;
101 regulator-max-microvolt = <1128000>;
102 };
103
104 vdda_wcss_pll:
105 vreg_l1a_0p75: ldo1 {
106 regulator-min-microvolt = <752000>;
107 regulator-max-microvolt = <752000>;
108 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
109 };
110
111 vdd_pdphy:
112 vdda_usb_hs_3p1:
113 vreg_l2a_3p1: ldo2 {
114 regulator-min-microvolt = <3072000>;
115 regulator-max-microvolt = <3072000>;
116 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
117 };
118
119 vreg_l3a_0p8: ldo3 {
120 regulator-min-microvolt = <480000>;
121 regulator-max-microvolt = <932000>;
122 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
123 };
124
125 vdd_usb_hs_core:
126 vdda_csi_0_0p9:
127 vdda_csi_1_0p9:
128 vdda_csi_2_0p9:
129 vdda_csi_3_0p9:
130 vdda_dsi_0_0p9:
131 vdda_dsi_1_0p9:
132 vdda_dsi_0_pll_0p9:
133 vdda_dsi_1_pll_0p9:
134 vdda_pcie_1ln_core:
135 vdda_pcie_2ln_core:
136 vdda_pll_hv_cc_ebi01:
137 vdda_pll_hv_cc_ebi23:
138 vdda_qrefs_0p875_5:
139 vdda_sp_sensor:
140 vdda_ufs_2ln_core_1:
141 vdda_ufs_2ln_core_2:
142 vdda_qlink_lv:
143 vdda_qlink_lv_ck:
144 vreg_l5a_0p875: ldo5 {
145 regulator-min-microvolt = <880000>;
146 regulator-max-microvolt = <880000>;
147 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
148 };
149
150 vreg_l6a_1p2: ldo6 {
151 regulator-min-microvolt = <1200000>;
152 regulator-max-microvolt = <1200000>;
153 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
154 };
155
156 vreg_l7a_1p8: ldo7 {
157 regulator-min-microvolt = <1800000>;
158 regulator-max-microvolt = <1800000>;
159 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
160 };
161
162 vddpx_10:
163 vreg_l9a_1p2: ldo9 {
164 regulator-min-microvolt = <1200000>;
165 regulator-max-microvolt = <1200000>;
166 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
167 };
168
169 vreg_l10a_2p5: ldo10 {
170 regulator-min-microvolt = <2504000>;
171 regulator-max-microvolt = <2960000>;
172 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
173 };
174
175 vreg_l11a_0p8: ldo11 {
176 regulator-min-microvolt = <800000>;
177 regulator-max-microvolt = <800000>;
178 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
179 };
180
181 vdd_qfprom:
182 vdd_qfprom_sp:
183 vdda_apc_cs_1p8:
184 vdda_gfx_cs_1p8:
185 vdda_usb_hs_1p8:
186 vdda_qrefs_vref_1p8:
187 vddpx_10_a:
188 vreg_l12a_1p8: ldo12 {
189 regulator-min-microvolt = <1800000>;
190 regulator-max-microvolt = <1800000>;
191 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
192 };
193
194 vreg_l13a_2p7: ldo13 {
195 regulator-min-microvolt = <2704000>;
196 regulator-max-microvolt = <2704000>;
197 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
198 };
199
200 vreg_l14a_1p8: ldo14 {
201 regulator-min-microvolt = <1800000>;
202 regulator-max-microvolt = <1880000>;
203 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
204 };
205
206 vreg_l15a_1p7: ldo15 {
207 regulator-min-microvolt = <1704000>;
208 regulator-max-microvolt = <1704000>;
209 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
210 };
211
212 vreg_l16a_2p7: ldo16 {
213 regulator-min-microvolt = <2704000>;
214 regulator-max-microvolt = <2960000>;
215 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
216 };
217
218 vreg_l17a_3p0: ldo17 {
219 regulator-min-microvolt = <2856000>;
220 regulator-max-microvolt = <3008000>;
221 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
222 };
223
224 vreg_l18a_0p8: ldo18 {
225 regulator-min-microvolt = <880000>;
226 regulator-max-microvolt = <880000>;
227 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
228 };
229 };
230
231 regulators-1 {
232 compatible = "qcom,pm8150l-rpmh-regulators";
233 qcom,pmic-id = "c";
234
235 vdd-s1-supply = <&vph_pwr>;
236 vdd-s2-supply = <&vph_pwr>;
237 vdd-s3-supply = <&vph_pwr>;
238 vdd-s4-supply = <&vph_pwr>;
239 vdd-s5-supply = <&vph_pwr>;
240 vdd-s6-supply = <&vph_pwr>;
241 vdd-s7-supply = <&vph_pwr>;
242 vdd-s8-supply = <&vph_pwr>;
243
244 vdd-l1-l8-supply = <&vreg_s4a_1p8>;
245 vdd-l2-l3-supply = <&vreg_s8c_1p3>;
246 vdd-l4-l5-l6-supply = <&vreg_bob>;
247 vdd-l7-l11-supply = <&vreg_bob>;
248 vdd-l9-l10-supply = <&vreg_bob>;
249
250 vdd-bob-supply = <&vph_pwr>;
251 vdd-flash-supply = <&vreg_bob>;
252 vdd-rgb-supply = <&vreg_bob>;
253
254 vreg_bob: bob {
255 regulator-min-microvolt = <3008000>;
256 regulator-max-microvolt = <4000000>;
257 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
258 regulator-allow-bypass;
259 };
260
261 vreg_s8c_1p3: smps8 {
262 regulator-min-microvolt = <1352000>;
263 regulator-max-microvolt = <1352000>;
264 };
265
266 vreg_l1c_1p8: ldo1 {
267 regulator-min-microvolt = <1800000>;
268 regulator-max-microvolt = <1800000>;
269 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
270 };
271
272 vdda_wcss_adcdac_1:
273 vdda_wcss_adcdac_22:
274 vreg_l2c_1p3: ldo2 {
275 regulator-min-microvolt = <1304000>;
276 regulator-max-microvolt = <1304000>;
277 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
278 };
279
280 vdda_hv_ebi0:
281 vdda_hv_ebi1:
282 vdda_hv_ebi2:
283 vdda_hv_ebi3:
284 vdda_hv_refgen0:
285 vdda_qlink_hv_ck:
286 vreg_l3c_1p2: ldo3 {
287 regulator-min-microvolt = <1200000>;
288 regulator-max-microvolt = <1200000>;
289 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
290 };
291
292 vddpx_5:
293 vreg_l4c_1p8: ldo4 {
294 regulator-min-microvolt = <1704000>;
295 regulator-max-microvolt = <2928000>;
296 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
297 };
298
299 vddpx_6:
300 vreg_l5c_1p8: ldo5 {
301 regulator-min-microvolt = <1704000>;
302 regulator-max-microvolt = <2928000>;
303 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
304 };
305
306 vddpx_2:
307 vreg_l6c_2p9: ldo6 {
308 regulator-min-microvolt = <1800000>;
309 regulator-max-microvolt = <2960000>;
310 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
311 };
312
313 vreg_l7c_3p0: ldo7 {
314 regulator-min-microvolt = <2856000>;
315 regulator-max-microvolt = <3104000>;
316 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
317 };
318
319 vreg_l8c_1p8: ldo8 {
320 regulator-min-microvolt = <1800000>;
321 regulator-max-microvolt = <1800000>;
322 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
323 };
324
325 vreg_l9c_2p9: ldo9 {
326 regulator-min-microvolt = <2704000>;
327 regulator-max-microvolt = <2960000>;
328 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
329 };
330
331 vreg_l10c_3p3: ldo10 {
332 regulator-min-microvolt = <3000000>;
333 regulator-max-microvolt = <3312000>;
334 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
335 };
336
337 vreg_l11c_3p3: ldo11 {
338 regulator-min-microvolt = <3000000>;
339 regulator-max-microvolt = <3312000>;
340 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
341 };
342 };
343
344 regulators-2 {
345 compatible = "qcom,pm8009-rpmh-regulators";
346 qcom,pmic-id = "f";
347
348 vdd-s1-supply = <&vph_pwr>;
349 vdd-s2-supply = <&vreg_bob>;
350
351 vdd-l2-supply = <&vreg_s8c_1p3>;
352 vdd-l5-l6-supply = <&vreg_bob>;
353
354 vreg_l2f_1p2: ldo2 {
355 regulator-min-microvolt = <1200000>;
356 regulator-max-microvolt = <1200000>;
357 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
358 };
359
360 vreg_l5f_2p85: ldo5 {
361 regulator-min-microvolt = <2800000>;
362 regulator-max-microvolt = <2800000>;
363 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
364 };
365
366 vreg_l6f_2p85: ldo6 {
367 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
368 regulator-min-microvolt = <2856000>;
369 regulator-max-microvolt = <2856000>;
370 };
371 };
372 };
373
374 &gmu {
375 status = "okay";
376 };
377
378 &gpi_dma0 {
379 status = "okay";
380 };
381
382 &gpi_dma1 {
383 status = "okay";
384 };
385
386 &gpu {
387 status = "okay";
388 };
389
390 &i2c4 {
391 clock-frequency = <100000>;
392
393 status = "okay";
394
395 typec-mux@42 {
396 compatible = "fcs,fsa4480";
397 reg = <0x42>;
398
399 interrupts-extended = <&tlmm 152 IRQ_TYPE_LEVEL_LOW>;
400
401 vcc-supply = <&vreg_bob>;
402 mode-switch;
403 orientation-switch;
404
405 port {
406 fsa4480_sbu_mux: endpoint {
407 remote-endpoint = <&pm8150b_typec_sbu_out>;
408 };
409 };
410 };
411 };
412
413 &i2c9 {
414 status = "okay";
415 clock-frequency = <400000>;
416
417 lt9611_codec: hdmi-bridge@3b {
418 compatible = "lontium,lt9611";
419 reg = <0x3b>;
420 #sound-dai-cells = <1>;
421
422 interrupts-extended = <&tlmm 9 IRQ_TYPE_EDGE_FALLING>;
423
424 reset-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
425
426 vdd-supply = <&vreg_s4a_1p8>;
427 vcc-supply = <&vreg_bob>;
428
429 pinctrl-names = "default";
430 pinctrl-0 = <<9611_irq_pin>;
431
432 ports {
433 #address-cells = <1>;
434 #size-cells = <0>;
435
436 port@0 {
437 reg = <0>;
438
439 lt9611_a: endpoint {
440 remote-endpoint = <&mdss_dsi0_out>;
441 };
442 };
443
444 port@1 {
445 reg = <1>;
446
447 lt9611_b: endpoint {
448 remote-endpoint = <&mdss_dsi1_out>;
449 };
450 };
451
452 port@2 {
453 reg = <2>;
454
455 lt9611_out: endpoint {
456 remote-endpoint = <&hdmi_con>;
457 };
458 };
459 };
460 };
461 };
462
463 &mdss {
464 status = "okay";
465 };
466
467 &mdss_dp {
468 status = "okay";
469 };
470
471 &mdss_dp_out {
472 data-lanes = <0 1>;
473 };
474
475 &mdss_dsi0 {
476 status = "okay";
477 vdda-supply = <&vreg_l3c_1p2>;
478
479 qcom,dual-dsi-mode;
480 qcom,master-dsi;
481
482 ports {
483 port@1 {
484 endpoint {
485 remote-endpoint = <<9611_a>;
486 data-lanes = <0 1 2 3>;
487 };
488 };
489 };
490 };
491
492 &mdss_dsi0_phy {
493 status = "okay";
494 vdds-supply = <&vreg_l5a_0p875>;
495 };
496
497 &mdss_dsi1 {
498 vdda-supply = <&vreg_l3c_1p2>;
499
500 qcom,dual-dsi-mode;
501
502 /* DSI1 is slave, so use DSI0 clocks */
503 assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
504
505 status = "okay";
506
507 ports {
508 port@1 {
509 endpoint {
510 remote-endpoint = <<9611_b>;
511 data-lanes = <0 1 2 3>;
512 };
513 };
514 };
515 };
516
517 &mdss_dsi1_phy {
518 vdds-supply = <&vreg_l5a_0p875>;
519 status = "okay";
520 };
521
522 &pm8150b_vbus {
523 regulator-min-microamp = <500000>;
524 regulator-max-microamp = <3000000>;
525 status = "okay";
526 };
527
528 &pm8150b_typec {
529 status = "okay";
530
531 vdd-pdphy-supply = <&vreg_l2a_3p1>;
532
533 connector {
534 compatible = "usb-c-connector";
535
536 power-role = "source";
537 data-role = "dual";
538 self-powered;
539
540 source-pdos = <PDO_FIXED(5000, 3000,
541 PDO_FIXED_DUAL_ROLE |
542 PDO_FIXED_USB_COMM |
543 PDO_FIXED_DATA_SWAP)>;
544
545 altmodes {
546 displayport {
547 svid = /bits/ 16 <0xff01>;
548 vdo = <0x00001c46>;
549 };
550 };
551
552 ports {
553 #address-cells = <1>;
554 #size-cells = <0>;
555
556 port@0 {
557 reg = <0>;
558 pm8150b_hs_in: endpoint {
559 remote-endpoint = <&usb_1_dwc3_hs>;
560 };
561 };
562
563 port@1 {
564 reg = <1>;
565 pm8150b_typec_mux_in: endpoint {
566 remote-endpoint = <&usb_1_qmpphy_out>;
567 };
568 };
569
570 port@2 {
571 reg = <2>;
572
573 pm8150b_typec_sbu_out: endpoint {
574 remote-endpoint = <&fsa4480_sbu_mux>;
575 };
576 };
577 };
578 };
579 };
580
581 &pon_pwrkey {
582 status = "okay";
583 };
584
585 &pon_resin {
586 status = "okay";
587
588 linux,code = <KEY_VOLUMEDOWN>;
589 };
590
591 &qupv3_id_0 {
592 status = "okay";
593 };
594
595 &qupv3_id_1 {
596 status = "okay";
597 };
598
599 &remoteproc_adsp {
600 status = "okay";
601
602 firmware-name = "qcom/sm8150/adsp.mbn";
603 };
604
605 &remoteproc_cdsp {
606 status = "okay";
607
608 firmware-name = "qcom/sm8150/cdsp.mbn";
609 };
610
611 &remoteproc_mpss {
612 firmware-name = "qcom/sm8150/modem.mbn";
613 status = "okay";
614 };
615
616 &remoteproc_slpi {
617 status = "okay";
618
619 firmware-name = "qcom/sm8150/slpi.mbn";
620 };
621
622 &tlmm {
623 gpio-reserved-ranges = <0 4>, <126 4>;
624
625 lt9611_irq_pin: lt9611-irq-state {
626 pins = "gpio9";
627 function = "gpio";
628 bias-disable;
629 };
630
631 };
632
633 &uart2 {
634 status = "okay";
635 };
636
637 &ufs_mem_hc {
638 status = "okay";
639
640 reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
641
642 vcc-supply = <&vreg_l10a_2p5>;
643 vcc-max-microamp = <750000>;
644 vccq-supply = <&vreg_l9a_1p2>;
645 vccq-max-microamp = <700000>;
646 vccq2-supply = <&vreg_s4a_1p8>;
647 vccq2-max-microamp = <750000>;
648 };
649
650 &ufs_mem_phy {
651 status = "okay";
652
653 vdda-phy-supply = <&vdda_ufs_2ln_core_1>;
654 vdda-pll-supply = <&vreg_l3c_1p2>;
655 };
656
657 &usb_1_hsphy {
658 status = "okay";
659 vdda-pll-supply = <&vdd_usb_hs_core>;
660 vdda33-supply = <&vdda_usb_hs_3p1>;
661 vdda18-supply = <&vdda_usb_hs_1p8>;
662 };
663
664 &usb_2_hsphy {
665 status = "okay";
666 vdda-pll-supply = <&vdd_usb_hs_core>;
667 vdda33-supply = <&vdda_usb_hs_3p1>;
668 vdda18-supply = <&vdda_usb_hs_1p8>;
669 };
670
671 &usb_1_qmpphy {
672 status = "okay";
673 vdda-phy-supply = <&vreg_l3c_1p2>;
674 vdda-pll-supply = <&vreg_l18a_0p8>;
675 orientation-switch;
676 };
677
678 &usb_1_qmpphy_out {
679 remote-endpoint = <&pm8150b_typec_mux_in>;
680 };
681
682 &usb_2_qmpphy {
683 status = "okay";
684 vdda-phy-supply = <&vreg_l3c_1p2>;
685 vdda-pll-supply = <&vreg_l5a_0p875>;
686 };
687
688 &usb_1 {
689 status = "okay";
690 };
691
692 &usb_2 {
693 status = "okay";
694 };
695
696 &usb_1_dwc3 {
697 dr_mode = "otg";
698 usb-role-switch;
699 };
700
701 &usb_1_dwc3_hs {
702 remote-endpoint = <&pm8150b_hs_in>;
703 };
704
705 &usb_2_dwc3 {
706 dr_mode = "host";
707 };
708
709 &wifi {
710 status = "okay";
711
712 vdd-0.8-cx-mx-supply = <&vreg_l1a_0p75>;
713 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
714 vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
715 vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
716
717 qcom,ath10k-calibration-variant = "Qualcomm_sm8150hdk";
718 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.