1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
4 */
5
6 /dts-v1/;
7
8 #include "sm8250-sony-xperia-edo.dtsi"
9
10 / {
11 model = "Sony Xperia 5 II";
12 compatible = "sony,pdx206-generic", "qcom,sm8250";
13 chassis-type = "handset";
14 };
15
16 &framebuffer {
17 width = <1080>;
18 height = <2520>;
19 stride = <(1080 * 4)>;
20 };
21
22 &gpio_keys {
23 pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &g_assist_n>;
24
25 g-assist-key {
26 label = "Google Assistant Key";
27 linux,code = <KEY_LEFTMETA>;
28 gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
29 debounce-interval = <15>;
30 linux,can-disable;
31 wakeup-source;
32 };
33 };
34
35 &pm8009_gpios {
36 gpio-line-names = "NC", /* GPIO_1 */
37 "NC",
38 "WIDEC_PWR_EN",
39 "NC";
40 };
41
42 &pm8150_gpios {
43 gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */
44 "OPTION_2",
45 "NC",
46 "PM_SLP_CLK_IN",
47 "OPTION_1",
48 "G_ASSIST_N",
49 "NC",
50 "SP_ARI_PWR_ALARM",
51 "NC",
52 "NC"; /* GPIO_10 */
53
54 g_assist_n: g-assist-n-state {
55 pins = "gpio6";
56 function = "normal";
57 power-source = <1>;
58 bias-pull-up;
59 input-enable;
60 };
61 };
62
63 &pm8150b_gpios {
64 gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */
65 "FOCUS_N",
66 "NC",
67 "NC",
68 "RF_LCD_ID_EN",
69 "NC",
70 "NC",
71 "LCD_ID",
72 "NC",
73 "NC", /* GPIO_10 */
74 "NC",
75 "RF_ID";
76 };
77
78 &pm8150l_gpios {
79 gpio-line-names = "NC", /* GPIO_1 */
80 "PM3003A_EN",
81 "NC",
82 "NC",
83 "NC",
84 "AUX2_THERM",
85 "BB_HP_EN",
86 "FP_LDO_EN",
87 "PMX_RESET_N",
88 "NC", /* GPIO_10 */
89 "NC",
90 "PM3003A_MODE";
91 };
92
93 &tlmm {
94 gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
95 "MDM2AP_ERR_FATAL",
96 "AP_CTI_OUT",
97 "MDM2AP_STATUS",
98 "NFC_I2C_SDA",
99 "NFC_I2C_SCL",
100 "NFC_EN",
101 "NFC_CLK_REQ",
102 "NFC_ESE_PWR_REQ",
103 "DVDT_WRT_DET_AND",
104 "SPK_AMP_RESET_N", /* GPIO_10 */
105 "SPK_AMP_INT_N",
106 "APPS_I2C_1_SDA",
107 "APPS_I2C_1_SCL",
108 "NC",
109 "TX_GTR_THRES_IN",
110 "HST_BT_UART_CTS",
111 "HST_BT_UART_RFR",
112 "HST_BT_UART_TX",
113 "HST_BT_UART_RX",
114 "HST_WLAN_EN", /* GPIO_20 */
115 "HST_BT_EN",
116 "RGBC_IR_PWR_EN",
117 "FP_INT_N",
118 "NC",
119 "NC",
120 "NC",
121 "NC",
122 "NFC_ESE_SPI_MISO",
123 "NFC_ESE_SPI_MOSI",
124 "NFC_ESE_SPI_SCLK", /* GPIO_30 */
125 "NFC_ESE_SPI_CS_N",
126 "WCD_RST_N",
127 "NC",
128 "SDM_DEBUG_UART_TX",
129 "SDM_DEBUG_UART_RX",
130 "TS_I2C_SDA",
131 "TS_I2C_SCL",
132 "TS_INT_N",
133 "FP_SPI_MISO", /* GPIO_40 */
134 "FP_SPI_MOSI",
135 "FP_SPI_SCLK",
136 "FP_SPI_CS_N",
137 "APPS_I2C_0_SDA",
138 "APPS_I2C_0_SCL",
139 "DISP_ERR_FG",
140 "UIM2_DETECT_EN",
141 "NC",
142 "NC",
143 "NC", /* GPIO_50 */
144 "NC",
145 "MDM_UART_CTS",
146 "MDM_UART_RFR",
147 "MDM_UART_TX",
148 "MDM_UART_RX",
149 "AP2MDM_STATUS",
150 "AP2MDM_ERR_FATAL",
151 "MDM_IPC_HS_UART_TX",
152 "MDM_IPC_HS_UART_RX",
153 "NC", /* GPIO_60 */
154 "NC",
155 "NC",
156 "NC",
157 "NC",
158 "USB_CC_DIR",
159 "DISP_VSYNC",
160 "NC",
161 "NC",
162 "CAM_PWR_B_CS",
163 "NC", /* GPIO_70 */
164 "FRONTC_PWR_EN",
165 "SBU_SW_SEL",
166 "SBU_SW_OE",
167 "FP_RESET_N",
168 "FP_RESET_N",
169 "DISP_RESET_N",
170 "DEBUG_GPIO0",
171 "TRAY_DET",
172 "CAM2_RST_N",
173 "PCIE0_RST_N",
174 "PCIE0_CLK_REQ_N", /* GPIO_80 */
175 "PCIE0_WAKE_N",
176 "DVDT_ENABLE",
177 "DVDT_WRT_DET_OR",
178 "NC",
179 "PCIE2_RST_N",
180 "PCIE2_CLK_REQ_N",
181 "PCIE2_WAKE_N",
182 "MDM_VFR_IRQ0",
183 "MDM_VFR_IRQ1",
184 "SW_SERVICE", /* GPIO_90 */
185 "CAM_SOF",
186 "CAM1_RST_N",
187 "CAM0_RST_N",
188 "CAM0_MCLK",
189 "CAM1_MCLK",
190 "CAM2_MCLK",
191 "CAM3_MCLK",
192 "NC",
193 "NC",
194 "NC", /* GPIO_100 */
195 "CCI0_I2C_SDA",
196 "CCI0_I2C_SCL",
197 "CCI1_I2C_SDA",
198 "CCI1_I2C_SCL_",
199 "CCI2_I2C_SDA",
200 "CCI2_I2C_SCL",
201 "CCI3_I2C_SDA",
202 "CCI3_I2C_SCL",
203 "CAM3_RST_N",
204 "NFC_DWL_REQ", /* GPIO_110 */
205 "NFC_IRQ",
206 "XVS",
207 "NC",
208 "RF_ID_EXTENSION",
209 "SPK_AMP_I2C_SDA",
210 "SPK_AMP_I2C_SCL",
211 "NC",
212 "NC",
213 "NC",
214 "NC",
215 "ACC_COVER_OPEN",
216 "ALS_PROX_INT_N",
217 "ACCEL_INT",
218 "WLAN_SW_CTRL",
219 "CAMSENSOR_I2C_SDA",
220 "CAMSENSOR_I2C_SCL",
221 "UDON_SWITCH_SEL",
222 "WDOG_DISABLE",
223 "BAROMETER_INT",
224 "NC", /* GPIO_130 */
225 "NC",
226 "FORCED_USB_BOOT",
227 "NC",
228 "NC",
229 "NC",
230 "NC",
231 "NC",
232 "RGBC_IR_INT",
233 "NC",
234 "NC", /* GPIO_140 */
235 "NC",
236 "BT_SLIMBUS_CLK",
237 "BT_SLIMBUS_DATA",
238 "HW_ID_0",
239 "HW_ID_1",
240 "WCD_SWR_TX_CLK",
241 "WCD_SWR_TX_DATA0",
242 "WCD_SWR_TX_DATA1",
243 "WCD_SWR_RX_CLK",
244 "WCD_SWR_RX_DATA0", /* GPIO_150 */
245 "WCD_SWR_RX_DATA1",
246 "SDM_DMIC_CLK1",
247 "SDM_DMIC_DATA1",
248 "SDM_DMIC_CLK2",
249 "SDM_DMIC_DATA2",
250 "SPK_AMP_I2S_CLK",
251 "SPK_AMP_I2S_WS",
252 "SPK_AMP_I2S_ASP_DIN",
253 "SPK_AMP_I2S_ASP_DOUT",
254 "COMPASS_I2C_SDA", /* GPIO_160 */
255 "COMPASS_I2C_SCL",
256 "NC",
257 "NC",
258 "SSC_SPI_1_MISO",
259 "SSC_SPI_1_MOSI",
260 "SSC_SPI_1_CLK",
261 "SSC_SPI_1_CS_N",
262 "NC",
263 "NC",
264 "SSC_SENSOR_I2C_SDA", /* GPIO_170 */
265 "SSC_SENSOR_I2C_SCL",
266 "NC",
267 "NC",
268 "NC",
269 "NC",
270 "HST_BLE_SNS_UART6_TX",
271 "HST_BLE_SNS_UART6_RX",
272 "HST_WLAN_UART_TX",
273 "HST_WLAN_UART_RX";
274 };
275
276 &vreg_l2f_1p3 {
277 regulator-min-microvolt = <1200000>;
278 regulator-max-microvolt = <1200000>;
279 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.