1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
4 */
5
6 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
7 #include "sm8250.dtsi"
8 #include "pm8150.dtsi"
9 #include "pm8150b.dtsi"
10 #include "pm8150l.dtsi"
11 #include "pm8009.dtsi"
12
13 /delete-node/ &adsp_mem;
14 /delete-node/ &spss_mem;
15 /delete-node/ &cdsp_secure_heap;
16
17 / {
18 qcom,msm-id = <356 0x20001>; /* SM8250 v2.1 */
19 qcom,board-id = <0x10008 0>;
20
21 aliases {
22 serial0 = &uart12;
23 };
24
25 chosen {
26 stdout-path = "serial0:115200n8";
27 #address-cells = <2>;
28 #size-cells = <2>;
29 ranges;
30
31 framebuffer: framebuffer@9c000000 {
32 compatible = "simple-framebuffer";
33 reg = <0 0x9c000000 0 0x2300000>;
34 /* pdx203 BL initializes in 2.5k mode, not 4k */
35 width = <1096>;
36 height = <2560>;
37 stride = <(1096 * 4)>;
38 format = "a8r8g8b8";
39 /*
40 * That's a lot of clocks, but it's necessary due
41 * to unused clk cleanup & no panel driver yet..
42 */
43 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
44 <&gcc GCC_DISP_HF_AXI_CLK>,
45 <&gcc GCC_DISP_SF_AXI_CLK>,
46 <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
47 <&dispcc DISP_CC_MDSS_MDP_CLK>,
48 <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
49 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
50 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
51 <&dispcc DISP_CC_MDSS_ESC0_CLK>;
52 power-domains = <&dispcc MDSS_GDSC>;
53 };
54 };
55
56 gpio_keys: gpio-keys {
57 compatible = "gpio-keys";
58
59 pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
60 pinctrl-names = "default";
61
62 key-camera-focus {
63 label = "Camera Focus";
64 linux,code = <KEY_CAMERA_FOCUS>;
65 gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>;
66 debounce-interval = <15>;
67 linux,can-disable;
68 wakeup-source;
69 };
70
71 key-camera-snapshot {
72 label = "Camera Snapshot";
73 linux,code = <KEY_CAMERA>;
74 gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>;
75 debounce-interval = <15>;
76 linux,can-disable;
77 wakeup-source;
78 };
79
80 key-vol-down {
81 label = "Volume Down";
82 linux,code = <KEY_VOLUMEDOWN>;
83 gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>;
84 debounce-interval = <15>;
85 linux,can-disable;
86 wakeup-source;
87 };
88 };
89
90 vph_pwr: vph-pwr-regulator {
91 compatible = "regulator-fixed";
92 regulator-name = "vph_pwr";
93 regulator-min-microvolt = <3700000>;
94 regulator-max-microvolt = <3700000>;
95 };
96
97 /* S6c is really ebi.lvl but it's there for supply map completeness sake. */
98 vreg_s6c_0p88: smpc6-regulator {
99 compatible = "regulator-fixed";
100 regulator-name = "vreg_s6c_0p88";
101
102 regulator-min-microvolt = <880000>;
103 regulator-max-microvolt = <880000>;
104 regulator-always-on;
105 vin-supply = <&vph_pwr>;
106 };
107
108 reserved-memory {
109 adsp_mem: memory@8a100000 {
110 reg = <0x0 0x8a100000 0x0 0x2500000>;
111 no-map;
112 };
113
114 spss_mem: memory@8c600000 {
115 reg = <0x0 0x8c600000 0x0 0x100000>;
116 no-map;
117 };
118
119 cdsp_secure_heap: memory@8c700000 {
120 reg = <0x0 0x8c700000 0x0 0x4600000>;
121 no-map;
122 };
123
124 cont_splash_mem: memory@9c000000 {
125 reg = <0x0 0x9c000000 0x0 0x2300000>;
126 no-map;
127 };
128
129 ramoops@ffc00000 {
130 compatible = "ramoops";
131 reg = <0x0 0xffc00000 0x0 0x100000>;
132 record-size = <0x1000>;
133 console-size = <0x40000>;
134 pmsg-size = <0x20000>;
135 ecc-size = <16>;
136 no-map;
137 };
138 };
139 };
140
141 &adsp {
142 status = "okay";
143 };
144
145 &apps_rsc {
146 regulators-0 {
147 compatible = "qcom,pm8150-rpmh-regulators";
148 qcom,pmic-id = "a";
149
150 vdd-s1-supply = <&vph_pwr>;
151 vdd-s2-supply = <&vph_pwr>;
152 vdd-s3-supply = <&vph_pwr>;
153 vdd-s4-supply = <&vph_pwr>;
154 vdd-s5-supply = <&vph_pwr>;
155 vdd-s6-supply = <&vph_pwr>;
156 vdd-s7-supply = <&vph_pwr>;
157 vdd-s8-supply = <&vph_pwr>;
158 vdd-s9-supply = <&vph_pwr>;
159 vdd-s10-supply = <&vph_pwr>;
160 vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
161 vdd-l2-l10-supply = <&vreg_bob>;
162 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p6>;
163 vdd-l6-l9-supply = <&vreg_s8c_1p2>;
164 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
165 vdd-l13-l16-l17-supply = <&vreg_bob>;
166
167 /* (S1+S2+S3) - cx.lvl (ARC) */
168
169 vreg_s4a_1p8: smps4 {
170 regulator-name = "vreg_s4a_1p8";
171 regulator-min-microvolt = <1800000>;
172 regulator-max-microvolt = <1920000>;
173 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
174 };
175
176 vreg_s5a_1p9: smps5 {
177 regulator-name = "vreg_s5a_1p9";
178 regulator-min-microvolt = <1824000>;
179 regulator-max-microvolt = <2040000>;
180 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
181 };
182
183 vreg_s6a_0p6: smps6 {
184 regulator-name = "vreg_s6a_0p6";
185 regulator-min-microvolt = <600000>;
186 regulator-max-microvolt = <1128000>;
187 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
188 };
189
190 vreg_l2a_3p1: ldo2 {
191 regulator-name = "vreg_l2a_3p1";
192 regulator-min-microvolt = <3072000>;
193 regulator-max-microvolt = <3072000>;
194 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
195 };
196
197 vreg_l3a_0p9: ldo3 {
198 regulator-name = "vreg_l3a_0p9";
199 regulator-min-microvolt = <928000>;
200 regulator-max-microvolt = <932000>;
201 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
202 };
203
204 /* L4 - lmx.lvl (ARC) */
205
206 vreg_l5a_0p88: ldo5 {
207 regulator-name = "vreg_l5a_0p88";
208 regulator-min-microvolt = <880000>;
209 regulator-max-microvolt = <880000>;
210 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
211 };
212
213 vreg_l6a_1p2: ldo6 {
214 regulator-name = "vreg_l6a_1p2";
215 regulator-min-microvolt = <1200000>;
216 regulator-max-microvolt = <1200000>;
217 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
218 };
219
220 /* L7 is unused. */
221
222 vreg_l9a_1p2: ldo9 {
223 regulator-name = "vreg_l9a_1p2";
224 regulator-min-microvolt = <1200000>;
225 regulator-max-microvolt = <1200000>;
226 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
227 };
228
229 /* L10 is unused, L11 - lcx.lvl (ARC) */
230
231 vreg_l12a_1p8: ldo12 {
232 regulator-name = "vreg_l12a_1p8";
233 regulator-min-microvolt = <1800000>;
234 regulator-max-microvolt = <1800000>;
235 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
236 };
237
238 /* L13 is unused. */
239
240 vreg_l14a_1p8: ldo14 {
241 regulator-name = "vreg_l14a_1p8";
242 regulator-min-microvolt = <1800000>;
243 regulator-max-microvolt = <1880000>;
244 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
245 };
246
247 /* L15 & L16 are unused. */
248
249 vreg_l17a_3p0: ldo17 {
250 regulator-name = "vreg_l17a_3p0";
251 regulator-min-microvolt = <2496000>;
252 regulator-max-microvolt = <3008000>;
253 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
254 };
255
256 vreg_l18a_0p9: ldo18 {
257 regulator-name = "vreg_l18a_0p9";
258 regulator-min-microvolt = <800000>;
259 regulator-max-microvolt = <920000>;
260 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
261 };
262 };
263
264 /*
265 * Remaining regulators that are not yet supported:
266 * OLEDB: 4925000-8100000
267 * ab: 4600000-6100000
268 * ibb: 800000-5400000
269 */
270 regulators-1 {
271 compatible = "qcom,pm8150l-rpmh-regulators";
272 qcom,pmic-id = "c";
273
274 vdd-s1-supply = <&vph_pwr>;
275 vdd-s2-supply = <&vph_pwr>;
276 vdd-s3-supply = <&vph_pwr>;
277 vdd-s4-supply = <&vph_pwr>;
278 vdd-s5-supply = <&vph_pwr>;
279 vdd-s6-supply = <&vph_pwr>;
280 vdd-s7-supply = <&vph_pwr>;
281 vdd-s8-supply = <&vph_pwr>;
282 vdd-l1-l8-supply = <&vreg_s4a_1p8>;
283 vdd-l2-l3-supply = <&vreg_s8c_1p2>;
284 vdd-l4-l5-l6-supply = <&vreg_bob>;
285 vdd-l7-l11-supply = <&vreg_bob>;
286 vdd-l9-l10-supply = <&vreg_bob>;
287 vdd-bob-supply = <&vph_pwr>;
288
289 vreg_bob: bob {
290 regulator-name = "vreg_bob";
291 regulator-min-microvolt = <3350000>;
292 regulator-max-microvolt = <3960000>;
293 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
294 };
295
296 /*
297 * S1-S6 are ARCs:
298 * (S1+S2) - gfx.lvl,
299 * S3 - mx.lvl,
300 * (S4+S5) - mmcx.lvl,
301 * S6 - ebi.lvl
302 */
303
304 vreg_s7c_0p35: smps7 {
305 regulator-name = "vreg_s7c_0p35";
306 regulator-min-microvolt = <348000>;
307 regulator-max-microvolt = <1000000>;
308 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
309 };
310
311 vreg_s8c_1p2: smps8 {
312 regulator-name = "vreg_s8c_1p2";
313 regulator-min-microvolt = <1200000>;
314 regulator-max-microvolt = <1400000>;
315 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
316 };
317
318 vreg_l1c_1p8: ldo1 {
319 regulator-name = "vreg_l1c_1p8";
320 regulator-min-microvolt = <1800000>;
321 regulator-max-microvolt = <1800000>;
322 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
323 };
324
325 /* L2-4 are unused. */
326
327 vreg_l5c_1p8: ldo5 {
328 regulator-name = "vreg_l5c_1p8";
329 regulator-min-microvolt = <1800000>;
330 regulator-max-microvolt = <2800000>;
331 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
332 };
333
334 vreg_l6c_2p9: ldo6 {
335 regulator-name = "vreg_l6c_2p9";
336 regulator-min-microvolt = <1800000>;
337 regulator-max-microvolt = <2960000>;
338 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
339 regulator-allow-set-load;
340 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
341 RPMH_REGULATOR_MODE_HPM>;
342 };
343
344 vreg_l7c_2p85: ldo7 {
345 regulator-name = "vreg_l7c_2p85";
346 regulator-min-microvolt = <2856000>;
347 regulator-max-microvolt = <3104000>;
348 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
349 };
350
351 vreg_l8c_1p8: ldo8 {
352 regulator-name = "vreg_l8c_1p8";
353 regulator-min-microvolt = <1800000>;
354 regulator-max-microvolt = <1800000>;
355 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
356 };
357
358 vreg_l9c_2p9: ldo9 {
359 regulator-name = "vreg_l9c_2p9";
360 regulator-min-microvolt = <2704000>;
361 regulator-max-microvolt = <2960000>;
362 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
363 regulator-allow-set-load;
364 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
365 RPMH_REGULATOR_MODE_HPM>;
366 };
367
368 vreg_l10c_3p3: ldo10 {
369 regulator-name = "vreg_l10c_3p3";
370 regulator-min-microvolt = <3296000>;
371 regulator-max-microvolt = <3296000>;
372 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
373 };
374
375 vreg_l11c_3p0: ldo11 {
376 regulator-name = "vreg_l11c_3p0";
377 regulator-min-microvolt = <3000000>;
378 regulator-max-microvolt = <3000000>;
379 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
380 };
381 };
382
383 regulators-2 {
384 compatible = "qcom,pm8009-rpmh-regulators";
385 qcom,pmic-id = "f";
386
387 vdd-s1-supply = <&vph_pwr>;
388 vdd-s2-supply = <&vreg_bob>;
389 vdd-l2-supply = <&vreg_s8c_1p2>;
390 vdd-l5-l6-supply = <&vreg_bob>;
391 vdd-l7-supply = <&vreg_s4a_1p8>;
392
393 vreg_s1f_1p2: smps1 {
394 regulator-name = "vreg_s1f_1p2";
395 regulator-min-microvolt = <1200000>;
396 regulator-max-microvolt = <1200000>;
397 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
398 };
399
400 vreg_s2f_0p5: smps2 {
401 regulator-name = "vreg_s2f_0p5";
402 regulator-min-microvolt = <512000>;
403 regulator-max-microvolt = <1100000>;
404 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
405 };
406
407 /* L1 is unused. */
408
409 vreg_l2f_1p3: ldo2 {
410 regulator-name = "vreg_l2f_1p3";
411 regulator-min-microvolt = <1304000>;
412 regulator-max-microvolt = <1304000>;
413 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
414 };
415
416 /* L3 & L4 are unused. */
417
418 vreg_l5f_2p8: ldo5 {
419 regulator-name = "vreg_l5f_2p85";
420 regulator-min-microvolt = <2800000>;
421 regulator-max-microvolt = <2800000>;
422 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
423 };
424
425 vreg_l6f_2p8: ldo6 {
426 regulator-name = "vreg_l6f_2p8";
427 regulator-min-microvolt = <2800000>;
428 regulator-max-microvolt = <2800000>;
429 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
430 };
431
432 vreg_l7f_1p8: ldo7 {
433 regulator-name = "vreg_l7f_1p8";
434 regulator-min-microvolt = <1800000>;
435 regulator-max-microvolt = <1800000>;
436 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
437 };
438 };
439 };
440
441 &cdsp {
442 status = "okay";
443 };
444
445 &gpi_dma0 {
446 status = "okay";
447 };
448
449 &gpi_dma1 {
450 status = "okay";
451 };
452
453 &gpi_dma2 {
454 status = "okay";
455 };
456
457 &i2c1 {
458 status = "okay";
459 clock-frequency = <400000>;
460
461 nfc@28 {
462 compatible = "nxp,nxp-nci-i2c";
463 reg = <0x28>;
464
465 interrupt-parent = <&tlmm>;
466 interrupts = <111 IRQ_TYPE_EDGE_RISING>;
467
468 enable-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
469 firmware-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
470 };
471 };
472
473 &i2c2 {
474 status = "okay";
475 clock-frequency = <1000000>;
476
477 cs35l41_l: speaker-amp@40 {
478 compatible = "cirrus,cs35l41";
479 reg = <0x40>;
480 interrupt-parent = <&tlmm>;
481 interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
482 reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
483 cirrus,boost-peak-milliamp = <4000>;
484 cirrus,boost-ind-nanohenry = <1000>;
485 cirrus,boost-cap-microfarad = <15>;
486 cirrus,asp-sdout-hiz = <3>;
487 cirrus,gpio2-src-select = <2>;
488 cirrus,gpio2-output-enable;
489 #sound-dai-cells = <1>;
490 };
491
492 cs35l41_r: speaker-amp@41 {
493 compatible = "cirrus,cs35l41";
494 reg = <0x41>;
495 interrupt-parent = <&tlmm>;
496 interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
497 reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
498 cirrus,boost-peak-milliamp = <4000>;
499 cirrus,boost-ind-nanohenry = <1000>;
500 cirrus,boost-cap-microfarad = <15>;
501 cirrus,asp-sdout-hiz = <3>;
502 cirrus,gpio2-src-select = <2>;
503 cirrus,gpio2-output-enable;
504 #sound-dai-cells = <1>;
505 };
506 };
507
508 &i2c9 {
509 status = "okay";
510 clock-frequency = <400000>;
511
512 /* AMS TCS3490 RGB+IR color sensor @ 72 */
513 };
514
515 &i2c13 {
516 status = "okay";
517 clock-frequency = <400000>;
518
519 touchscreen@48 {
520 compatible = "samsung,s6sy761";
521 reg = <0x48>;
522 interrupt-parent = <&tlmm>;
523 interrupts = <39 IRQ_TYPE_LEVEL_LOW>;
524 /* It's "vddio" downstream but it works anyway! */
525 vdd-supply = <&vreg_l1c_1p8>;
526 avdd-supply = <&vreg_l10c_3p3>;
527
528 pinctrl-names = "default";
529 pinctrl-0 = <&ts_int_default>;
530 };
531 };
532
533 &i2c15 {
534 status = "okay";
535 clock-frequency = <400000>;
536
537 /* Qcom SMB1390 @ 10 */
538 /* Qcom SMB1390_slave @ 18 */
539 /* HALO HL6111R Qi charger @ 25 */
540 };
541
542 &pcie0 {
543 status = "okay";
544 };
545
546 &pcie0_phy {
547 status = "okay";
548
549 vdda-phy-supply = <&vreg_l5a_0p88>;
550 vdda-pll-supply = <&vreg_l9a_1p2>;
551 };
552
553 &pcie2 {
554 status = "okay";
555
556 pinctrl-0 = <&pcie2_default_state &mdm2ap_default &ap2mdm_default>;
557 };
558
559 &pcie2_phy {
560 status = "okay";
561
562 vdda-phy-supply = <&vreg_l5a_0p88>;
563 vdda-pll-supply = <&vreg_l9a_1p2>;
564 };
565
566 &pm8150_gpios {
567 vol_down_n: vol-down-n-state {
568 pins = "gpio1";
569 function = "normal";
570 power-source = <0>;
571 bias-pull-up;
572 input-enable;
573 };
574 };
575
576 &pm8150b_gpios {
577 snapshot_n: snapshot-n-state {
578 pins = "gpio1";
579 function = "normal";
580 power-source = <0>;
581 bias-pull-up;
582 input-enable;
583 };
584
585 focus_n: focus-n-state {
586 pins = "gpio2";
587 function = "normal";
588 power-source = <0>;
589 bias-pull-up;
590 input-enable;
591 };
592 };
593
594 &pon_pwrkey {
595 status = "okay";
596 };
597
598 &pon_resin {
599 status = "okay";
600
601 linux,code = <KEY_VOLUMEUP>;
602 };
603
604 &qupv3_id_0 {
605 status = "okay";
606 };
607
608 &qupv3_id_1 {
609 status = "okay";
610 };
611
612 &qupv3_id_2 {
613 status = "okay";
614 };
615
616 &sdhc_2 {
617 status = "okay";
618
619 cd-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>;
620 pinctrl-names = "default", "sleep";
621 pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
622 pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
623 vmmc-supply = <&vreg_l9c_2p9>;
624 vqmmc-supply = <&vreg_l6c_2p9>;
625 bus-width = <4>;
626 no-sdio;
627 no-mmc;
628 };
629
630 &slpi {
631 status = "okay";
632 };
633
634 &tlmm {
635 gpio-reserved-ranges = <40 4>, <52 4>;
636
637 sdc2_default_state: sdc2-default-state {
638 clk-pins {
639 pins = "sdc2_clk";
640 drive-strength = <16>;
641 bias-disable;
642 };
643
644 cmd-pins {
645 pins = "sdc2_cmd";
646 drive-strength = <16>;
647 bias-pull-up;
648 };
649
650 data-pins {
651 pins = "sdc2_data";
652 drive-strength = <16>;
653 bias-pull-up;
654 };
655 };
656
657 mdm2ap_default: mdm2ap-default-state {
658 pins = "gpio1", "gpio3";
659 function = "gpio";
660 drive-strength = <8>;
661 bias-disable;
662 };
663
664 ts_int_default: ts-int-default-state {
665 pins = "gpio39";
666 function = "gpio";
667 drive-strength = <2>;
668 bias-disable;
669 };
670
671 ap2mdm_default: ap2mdm-default-state {
672 pins = "gpio56", "gpio57";
673 function = "gpio";
674 drive-strength = <16>;
675 bias-disable;
676 };
677
678 sdc2_card_det_n: sd-card-det-n-state {
679 pins = "gpio77";
680 function = "gpio";
681 bias-pull-up;
682 drive-strength = <2>;
683 };
684 };
685
686 &uart12 {
687 status = "okay";
688 };
689
690 /* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
691 &ufs_mem_hc { status = "disabled"; };
692 &ufs_mem_phy { status = "disabled"; };
693
694 &usb_1 {
695 status = "okay";
696 };
697
698 &usb_1_dwc3 {
699 dr_mode = "peripheral";
700 };
701
702 &usb_1_hsphy {
703 status = "okay";
704
705 vdda-pll-supply = <&vreg_l5a_0p88>;
706 vdda18-supply = <&vreg_l12a_1p8>;
707 vdda33-supply = <&vreg_l2a_3p1>;
708 };
709
710 &usb_1_qmpphy {
711 status = "okay";
712
713 vdda-phy-supply = <&vreg_l9a_1p2>;
714 vdda-pll-supply = <&vreg_l18a_0p9>;
715 };
716
717 &venus {
718 firmware-name = "qcom/sm8250/Sony/edo/venus.mbn";
719 status = "okay";
720 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.