1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2023 Linaro Limited
4 */
5
6 /dts-v1/;
7
8 #include <dt-bindings/leds/common.h>
9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
10 #include "sm8550.dtsi"
11 #include "pm8010.dtsi"
12 #include "pm8550.dtsi"
13 #include "pm8550b.dtsi"
14 #define PMK8550VE_SID 5
15 #include "pm8550ve.dtsi"
16 #include "pm8550vs.dtsi"
17 #include "pmk8550.dtsi"
18 #include "pmr735d_a.dtsi"
19 #include "pmr735d_b.dtsi"
20
21 / {
22 model = "Qualcomm Technologies, Inc. SM8550 QRD";
23 compatible = "qcom,sm8550-qrd", "qcom,sm8550";
24 chassis-type = "handset";
25
26 aliases {
27 serial0 = &uart7;
28 serial1 = &uart14;
29 };
30
31 wcd938x: audio-codec {
32 compatible = "qcom,wcd9385-codec";
33
34 pinctrl-names = "default";
35 pinctrl-0 = <&wcd_default>;
36
37 qcom,micbias1-microvolt = <1800000>;
38 qcom,micbias2-microvolt = <1800000>;
39 qcom,micbias3-microvolt = <1800000>;
40 qcom,micbias4-microvolt = <1800000>;
41 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
42 qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
43 qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
44 qcom,rx-device = <&wcd_rx>;
45 qcom,tx-device = <&wcd_tx>;
46
47 reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
48
49 vdd-buck-supply = <&vreg_l15b_1p8>;
50 vdd-rxtx-supply = <&vreg_l15b_1p8>;
51 vdd-io-supply = <&vreg_l15b_1p8>;
52 vdd-mic-bias-supply = <&vreg_bob1>;
53
54 #sound-dai-cells = <1>;
55 };
56
57 chosen {
58 stdout-path = "serial0:115200n8";
59 };
60
61 gpio-keys {
62 compatible = "gpio-keys";
63
64 pinctrl-0 = <&volume_up_n>;
65 pinctrl-names = "default";
66
67 key-volume-up {
68 label = "Volume Up";
69 linux,code = <KEY_VOLUMEUP>;
70 gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
71 debounce-interval = <15>;
72 linux,can-disable;
73 wakeup-source;
74 };
75 };
76
77 pmic-glink {
78 compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
79 #address-cells = <1>;
80 #size-cells = <0>;
81 orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
82
83 connector@0 {
84 compatible = "usb-c-connector";
85 reg = <0>;
86 power-role = "dual";
87 data-role = "dual";
88
89 ports {
90 #address-cells = <1>;
91 #size-cells = <0>;
92
93 port@0 {
94 reg = <0>;
95
96 pmic_glink_hs_in: endpoint {
97 remote-endpoint = <&usb_1_dwc3_hs>;
98 };
99 };
100
101 port@1 {
102 reg = <1>;
103
104 pmic_glink_ss_in: endpoint {
105 remote-endpoint = <&redriver_ss_out>;
106 };
107 };
108
109 port@2 {
110 reg = <2>;
111
112 pmic_glink_sbu: endpoint {
113 remote-endpoint = <&fsa4480_sbu_mux>;
114 };
115 };
116 };
117 };
118 };
119
120 sound {
121 compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
122 model = "SM8550-QRD";
123 audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
124 "SpkrRight IN", "WSA_SPK2 OUT",
125 "IN1_HPHL", "HPHL_OUT",
126 "IN2_HPHR", "HPHR_OUT",
127 "AMIC1", "MIC BIAS1",
128 "AMIC2", "MIC BIAS2",
129 "AMIC3", "MIC BIAS3",
130 "AMIC4", "MIC BIAS3",
131 "AMIC5", "MIC BIAS4",
132 "VA DMIC0", "MIC BIAS1",
133 "VA DMIC1", "MIC BIAS1",
134 "VA DMIC2", "MIC BIAS3",
135 "TX DMIC0", "MIC BIAS1",
136 "TX DMIC1", "MIC BIAS2",
137 "TX DMIC2", "MIC BIAS3",
138 "TX SWR_INPUT0", "ADC1_OUTPUT",
139 "TX SWR_INPUT1", "ADC2_OUTPUT",
140 "TX SWR_INPUT0", "ADC3_OUTPUT",
141 "TX SWR_INPUT1", "ADC4_OUTPUT";
142
143 wcd-playback-dai-link {
144 link-name = "WCD Playback";
145
146 cpu {
147 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
148 };
149
150 codec {
151 sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
152 };
153
154 platform {
155 sound-dai = <&q6apm>;
156 };
157 };
158
159 wcd-capture-dai-link {
160 link-name = "WCD Capture";
161
162 cpu {
163 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
164 };
165
166 codec {
167 sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>;
168 };
169
170 platform {
171 sound-dai = <&q6apm>;
172 };
173 };
174
175 wsa-dai-link {
176 link-name = "WSA Playback";
177
178 cpu {
179 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
180 };
181
182 codec {
183 sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
184 };
185
186 platform {
187 sound-dai = <&q6apm>;
188 };
189 };
190
191 va-dai-link {
192 link-name = "VA Capture";
193
194 cpu {
195 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
196 };
197
198 codec {
199 sound-dai = <&lpass_vamacro 0>;
200 };
201
202 platform {
203 sound-dai = <&q6apm>;
204 };
205 };
206 };
207
208 vph_pwr: vph-pwr-regulator {
209 compatible = "regulator-fixed";
210 regulator-name = "vph_pwr";
211 regulator-min-microvolt = <3700000>;
212 regulator-max-microvolt = <3700000>;
213
214 regulator-always-on;
215 regulator-boot-on;
216 };
217
218 wcn7850-pmu {
219 compatible = "qcom,wcn7850-pmu";
220
221 pinctrl-names = "default";
222 pinctrl-0 = <&wlan_en>, <&bt_default>, <&pmk8550_sleep_clk>;
223
224 wlan-enable-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>;
225 bt-enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
226
227 vdd-supply = <&vreg_s5g_0p85>;
228 vddio-supply = <&vreg_l15b_1p8>;
229 vddaon-supply = <&vreg_s2g_0p85>;
230 vdddig-supply = <&vreg_s4e_0p95>;
231 vddrfa1p2-supply = <&vreg_s4g_1p25>;
232 vddrfa1p8-supply = <&vreg_s6g_1p86>;
233
234 regulators {
235 vreg_pmu_rfa_cmn: ldo0 {
236 regulator-name = "vreg_pmu_rfa_cmn";
237 };
238
239 vreg_pmu_aon_0p59: ldo1 {
240 regulator-name = "vreg_pmu_aon_0p59";
241 };
242
243 vreg_pmu_wlcx_0p8: ldo2 {
244 regulator-name = "vreg_pmu_wlcx_0p8";
245 };
246
247 vreg_pmu_wlmx_0p85: ldo3 {
248 regulator-name = "vreg_pmu_wlmx_0p85";
249 };
250
251 vreg_pmu_btcmx_0p85: ldo4 {
252 regulator-name = "vreg_pmu_btcmx_0p85";
253 };
254
255 vreg_pmu_rfa_0p8: ldo5 {
256 regulator-name = "vreg_pmu_rfa_0p8";
257 };
258
259 vreg_pmu_rfa_1p2: ldo6 {
260 regulator-name = "vreg_pmu_rfa_1p2";
261 };
262
263 vreg_pmu_rfa_1p8: ldo7 {
264 regulator-name = "vreg_pmu_rfa_1p8";
265 };
266
267 vreg_pmu_pcie_0p9: ldo8 {
268 regulator-name = "vreg_pmu_pcie_0p9";
269 };
270
271 vreg_pmu_pcie_1p8: ldo9 {
272 regulator-name = "vreg_pmu_pcie_1p8";
273 };
274 };
275 };
276 };
277
278 &apps_rsc {
279 regulators-0 {
280 compatible = "qcom,pm8550-rpmh-regulators";
281 qcom,pmic-id = "b";
282
283 vdd-bob1-supply = <&vph_pwr>;
284 vdd-bob2-supply = <&vph_pwr>;
285 vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>;
286 vdd-l2-l13-l14-supply = <&vreg_bob1>;
287 vdd-l3-supply = <&vreg_s4g_1p25>;
288 vdd-l5-l16-supply = <&vreg_bob1>;
289 vdd-l6-l7-supply = <&vreg_bob1>;
290 vdd-l8-l9-supply = <&vreg_bob1>;
291 vdd-l11-supply = <&vreg_s4g_1p25>;
292 vdd-l12-supply = <&vreg_s6g_1p86>;
293 vdd-l15-supply = <&vreg_s6g_1p86>;
294 vdd-l17-supply = <&vreg_bob2>;
295
296 vreg_bob1: bob1 {
297 regulator-name = "vreg_bob1";
298 regulator-min-microvolt = <3296000>;
299 regulator-max-microvolt = <3960000>;
300 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
301 };
302
303 vreg_bob2: bob2 {
304 regulator-name = "vreg_bob2";
305 regulator-min-microvolt = <2720000>;
306 regulator-max-microvolt = <3960000>;
307 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
308 };
309
310 vreg_l1b_1p8: ldo1 {
311 regulator-name = "vreg_l1b_1p8";
312 regulator-min-microvolt = <1800000>;
313 regulator-max-microvolt = <1800000>;
314 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
315 };
316
317 vreg_l2b_3p0: ldo2 {
318 regulator-name = "vreg_l2b_3p0";
319 regulator-min-microvolt = <3008000>;
320 regulator-max-microvolt = <3008000>;
321 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
322 };
323
324 vreg_l5b_3p1: ldo5 {
325 regulator-name = "vreg_l5b_3p1";
326 regulator-min-microvolt = <3104000>;
327 regulator-max-microvolt = <3104000>;
328 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
329 };
330
331 vreg_l6b_1p8: ldo6 {
332 regulator-name = "vreg_l6b_1p8";
333 regulator-min-microvolt = <1800000>;
334 regulator-max-microvolt = <3008000>;
335 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
336 };
337
338 vreg_l7b_1p8: ldo7 {
339 regulator-name = "vreg_l7b_1p8";
340 regulator-min-microvolt = <1800000>;
341 regulator-max-microvolt = <3008000>;
342 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
343 };
344
345 vreg_l8b_1p8: ldo8 {
346 regulator-name = "vreg_l8b_1p8";
347 regulator-min-microvolt = <1800000>;
348 regulator-max-microvolt = <3008000>;
349 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
350 };
351
352 vreg_l9b_2p9: ldo9 {
353 regulator-name = "vreg_l9b_2p9";
354 regulator-min-microvolt = <2960000>;
355 regulator-max-microvolt = <3008000>;
356 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
357 };
358
359 vreg_l11b_1p2: ldo11 {
360 regulator-name = "vreg_l11b_1p2";
361 regulator-min-microvolt = <1200000>;
362 regulator-max-microvolt = <1504000>;
363 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
364 };
365
366 vreg_l12b_1p8: ldo12 {
367 regulator-name = "vreg_l12b_1p8";
368 regulator-min-microvolt = <1800000>;
369 regulator-max-microvolt = <1800000>;
370 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
371 };
372
373 vreg_l13b_3p0: ldo13 {
374 regulator-name = "vreg_l13b_3p0";
375 regulator-min-microvolt = <3000000>;
376 regulator-max-microvolt = <3000000>;
377 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
378 };
379
380 vreg_l14b_3p2: ldo14 {
381 regulator-name = "vreg_l14b_3p2";
382 regulator-min-microvolt = <3200000>;
383 regulator-max-microvolt = <3200000>;
384 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
385 };
386
387 vreg_l15b_1p8: ldo15 {
388 regulator-name = "vreg_l15b_1p8";
389 regulator-min-microvolt = <1800000>;
390 regulator-max-microvolt = <1800000>;
391 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
392 };
393
394 vreg_l16b_2p8: ldo16 {
395 regulator-name = "vreg_l16b_2p8";
396 regulator-min-microvolt = <2800000>;
397 regulator-max-microvolt = <2800000>;
398 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
399 };
400
401 vreg_l17b_2p5: ldo17 {
402 regulator-name = "vreg_l17b_2p5";
403 regulator-min-microvolt = <2504000>;
404 regulator-max-microvolt = <2504000>;
405 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
406 };
407 };
408
409 regulators-1 {
410 compatible = "qcom,pm8550vs-rpmh-regulators";
411 qcom,pmic-id = "c";
412
413 vdd-l1-supply = <&vreg_s4g_1p25>;
414 vdd-l2-supply = <&vreg_s4e_0p95>;
415 vdd-l3-supply = <&vreg_s4e_0p95>;
416
417 vreg_l3c_0p9: ldo3 {
418 regulator-name = "vreg_l3c_0p9";
419 regulator-min-microvolt = <880000>;
420 regulator-max-microvolt = <912000>;
421 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
422 };
423 };
424
425 regulators-2 {
426 compatible = "qcom,pm8550vs-rpmh-regulators";
427 qcom,pmic-id = "d";
428
429 vdd-l1-supply = <&vreg_s4e_0p95>;
430 vdd-l2-supply = <&vreg_s4e_0p95>;
431 vdd-l3-supply = <&vreg_s4e_0p95>;
432
433 vreg_l1d_0p88: ldo1 {
434 regulator-name = "vreg_l1d_0p88";
435 regulator-min-microvolt = <880000>;
436 regulator-max-microvolt = <920000>;
437 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
438 };
439
440 /* ldo2 supplies SM8550 VDD_LPI_MX */
441 };
442
443 regulators-3 {
444 compatible = "qcom,pm8550vs-rpmh-regulators";
445 qcom,pmic-id = "e";
446
447 vdd-l1-supply = <&vreg_s4e_0p95>;
448 vdd-l2-supply = <&vreg_s4e_0p95>;
449 vdd-l3-supply = <&vreg_s4g_1p25>;
450 vdd-s4-supply = <&vph_pwr>;
451 vdd-s5-supply = <&vph_pwr>;
452
453 vreg_s4e_0p95: smps4 {
454 regulator-name = "vreg_s4e_0p95";
455 regulator-min-microvolt = <904000>;
456 regulator-max-microvolt = <984000>;
457 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
458 };
459
460 vreg_s5e_1p08: smps5 {
461 regulator-name = "vreg_s5e_1p08";
462 regulator-min-microvolt = <1080000>;
463 regulator-max-microvolt = <1120000>;
464 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
465 };
466
467 vreg_l1e_0p88: ldo1 {
468 regulator-name = "vreg_l1e_0p88";
469 regulator-min-microvolt = <880000>;
470 regulator-max-microvolt = <880000>;
471 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
472 };
473
474 vreg_l2e_0p9: ldo2 {
475 regulator-name = "vreg_l2e_0p9";
476 regulator-min-microvolt = <904000>;
477 regulator-max-microvolt = <970000>;
478 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
479 };
480
481 vreg_l3e_1p2: ldo3 {
482 regulator-name = "vreg_l3e_1p2";
483 regulator-min-microvolt = <1200000>;
484 regulator-max-microvolt = <1200000>;
485 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
486 };
487 };
488
489 regulators-4 {
490 compatible = "qcom,pm8550ve-rpmh-regulators";
491 qcom,pmic-id = "f";
492
493 vdd-l1-supply = <&vreg_s4e_0p95>;
494 vdd-l2-supply = <&vreg_s4e_0p95>;
495 vdd-l3-supply = <&vreg_s4e_0p95>;
496 vdd-s4-supply = <&vph_pwr>;
497
498 vreg_s4f_0p5: smps4 {
499 regulator-name = "vreg_s4f_0p5";
500 regulator-min-microvolt = <500000>;
501 regulator-max-microvolt = <700000>;
502 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
503 };
504
505 vreg_l1f_0p9: ldo1 {
506 regulator-name = "vreg_l1f_0p9";
507 regulator-min-microvolt = <912000>;
508 regulator-max-microvolt = <912000>;
509 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
510 };
511
512 vreg_l2f_0p88: ldo2 {
513 regulator-name = "vreg_l2f_0p88";
514 regulator-min-microvolt = <880000>;
515 regulator-max-microvolt = <912000>;
516 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
517 };
518
519 vreg_l3f_0p88: ldo3 {
520 regulator-name = "vreg_l3f_0p88";
521 regulator-min-microvolt = <880000>;
522 regulator-max-microvolt = <912000>;
523 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
524 };
525 };
526
527 regulators-5 {
528 compatible = "qcom,pm8550vs-rpmh-regulators";
529 qcom,pmic-id = "g";
530
531 vdd-l1-supply = <&vreg_s4g_1p25>;
532 vdd-l2-supply = <&vreg_s4g_1p25>;
533 vdd-l3-supply = <&vreg_s4g_1p25>;
534 vdd-s1-supply = <&vph_pwr>;
535 vdd-s2-supply = <&vph_pwr>;
536 vdd-s3-supply = <&vph_pwr>;
537 vdd-s4-supply = <&vph_pwr>;
538 vdd-s5-supply = <&vph_pwr>;
539 vdd-s6-supply = <&vph_pwr>;
540
541 vreg_s1g_1p25: smps1 {
542 regulator-name = "vreg_s1g_1p25";
543 regulator-min-microvolt = <1200000>;
544 regulator-max-microvolt = <1300000>;
545 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
546 };
547
548 vreg_s2g_0p85: smps2 {
549 regulator-name = "vreg_s2g_0p85";
550 regulator-min-microvolt = <800000>;
551 regulator-max-microvolt = <1000000>;
552 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
553 };
554
555 vreg_s3g_0p8: smps3 {
556 regulator-name = "vreg_s3g_0p8";
557 regulator-min-microvolt = <300000>;
558 regulator-max-microvolt = <1004000>;
559 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
560 };
561
562 vreg_s4g_1p25: smps4 {
563 regulator-name = "vreg_s4g_1p25";
564 regulator-min-microvolt = <1200000>;
565 regulator-max-microvolt = <1352000>;
566 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
567 };
568
569 vreg_s5g_0p85: smps5 {
570 regulator-name = "vreg_s5g_0p85";
571 regulator-min-microvolt = <500000>;
572 regulator-max-microvolt = <1004000>;
573 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
574 };
575
576 vreg_s6g_1p86: smps6 {
577 regulator-name = "vreg_s6g_1p86";
578 regulator-min-microvolt = <1800000>;
579 regulator-max-microvolt = <2000000>;
580 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
581 };
582
583 vreg_l1g_1p2: ldo1 {
584 regulator-name = "vreg_l1g_1p2";
585 regulator-min-microvolt = <1200000>;
586 regulator-max-microvolt = <1200000>;
587 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
588 };
589
590 vreg_l3g_1p2: ldo3 {
591 regulator-name = "vreg_l3g_1p2";
592 regulator-min-microvolt = <1200000>;
593 regulator-max-microvolt = <1200000>;
594 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
595 };
596 };
597
598 regulators-6 {
599 compatible = "qcom,pm8010-rpmh-regulators";
600 qcom,pmic-id = "m";
601
602 vdd-l1-l2-supply = <&vreg_s4g_1p25>;
603 vdd-l3-l4-supply = <&vreg_bob2>;
604 vdd-l5-supply = <&vreg_s6g_1p86>;
605 vdd-l6-supply = <&vreg_s6g_1p86>;
606 vdd-l7-supply = <&vreg_bob1>;
607
608 vreg_l1m_1p056: ldo1 {
609 regulator-name = "vreg_l1m_1p056";
610 regulator-min-microvolt = <1056000>;
611 regulator-max-microvolt = <1056000>;
612 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
613 };
614
615 vreg_l2m_1p056: ldo2 {
616 regulator-name = "vreg_l2m_1p056";
617 regulator-min-microvolt = <1056000>;
618 regulator-max-microvolt = <1056000>;
619 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
620 };
621
622 vreg_l3m_2p8: ldo3 {
623 regulator-name = "vreg_l3m_2p8";
624 regulator-min-microvolt = <2800000>;
625 regulator-max-microvolt = <2800000>;
626 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
627 };
628
629 vreg_l4m_2p8: ldo4 {
630 regulator-name = "vreg_l4m_2p8";
631 regulator-min-microvolt = <2800000>;
632 regulator-max-microvolt = <2800000>;
633 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
634 };
635
636 vreg_l5m_1p8: ldo5 {
637 regulator-name = "vreg_l5m_1p8";
638 regulator-min-microvolt = <1800000>;
639 regulator-max-microvolt = <1800000>;
640 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
641 };
642
643 vreg_l6m_1p8: ldo6 {
644 regulator-name = "vreg_l6m_1p8";
645 regulator-min-microvolt = <1800000>;
646 regulator-max-microvolt = <1800000>;
647 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
648 };
649
650 vreg_l7m_2p9: ldo7 {
651 regulator-name = "vreg_l7m_2p9";
652 regulator-min-microvolt = <2800000>;
653 regulator-max-microvolt = <2904000>;
654 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
655 };
656 };
657
658 regulators-7 {
659 compatible = "qcom,pm8010-rpmh-regulators";
660 qcom,pmic-id = "n";
661
662 vdd-l1-l2-supply = <&vreg_s4g_1p25>;
663 vdd-l3-l4-supply = <&vreg_bob2>;
664 vdd-l5-supply = <&vreg_s6g_1p86>;
665 vdd-l6-supply = <&vreg_bob1>;
666 vdd-l7-supply = <&vreg_bob1>;
667
668 vreg_l1n_1p1: ldo1 {
669 regulator-name = "vreg_l1n_1p1";
670 regulator-min-microvolt = <1104000>;
671 regulator-max-microvolt = <1200000>;
672 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
673 };
674
675 vreg_l2n_1p1: ldo2 {
676 regulator-name = "vreg_l2n_1p1";
677 regulator-min-microvolt = <1104000>;
678 regulator-max-microvolt = <1200000>;
679 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
680 };
681
682 vreg_l3n_2p8: ldo3 {
683 regulator-name = "vreg_l3n_2p8";
684 regulator-min-microvolt = <2800000>;
685 regulator-max-microvolt = <3000000>;
686 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
687 };
688
689 vreg_l4n_2p8: ldo4 {
690 regulator-name = "vreg_l4n_2p8";
691 regulator-min-microvolt = <2800000>;
692 regulator-max-microvolt = <3300000>;
693 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
694 };
695
696 vreg_l5n_1p8: ldo5 {
697 regulator-name = "vreg_l5n_1p8";
698 regulator-min-microvolt = <1800000>;
699 regulator-max-microvolt = <1800000>;
700 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
701 };
702
703 vreg_l6n_3p3: ldo6 {
704 regulator-name = "vreg_l6n_3p3";
705 regulator-min-microvolt = <2800000>;
706 regulator-max-microvolt = <3304000>;
707 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
708 };
709
710 vreg_l7n_2p96: ldo7 {
711 regulator-name = "vreg_l7n_2p96";
712 regulator-min-microvolt = <2800000>;
713 regulator-max-microvolt = <2960000>;
714 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
715 };
716 };
717 };
718
719 &i2c_master_hub_0 {
720 status = "okay";
721 };
722
723 &i2c_hub_2 {
724 status = "okay";
725
726 typec-retimer@1c {
727 compatible = "onnn,nb7vpq904m";
728 reg = <0x1c>;
729
730 vcc-supply = <&vreg_l15b_1p8>;
731
732 retimer-switch;
733 orientation-switch;
734
735 ports {
736 #address-cells = <1>;
737 #size-cells = <0>;
738
739 port@0 {
740 reg = <0>;
741
742 redriver_ss_out: endpoint {
743 remote-endpoint = <&pmic_glink_ss_in>;
744 };
745 };
746
747 port@1 {
748 reg = <1>;
749
750 redriver_ss_in: endpoint {
751 data-lanes = <3 2 1 0>;
752 remote-endpoint = <&usb_dp_qmpphy_out>;
753 };
754 };
755 };
756 };
757
758 typec-mux@42 {
759 compatible = "fcs,fsa4480";
760 reg = <0x42>;
761
762 vcc-supply = <&vreg_bob1>;
763
764 mode-switch;
765 orientation-switch;
766
767 port {
768 fsa4480_sbu_mux: endpoint {
769 remote-endpoint = <&pmic_glink_sbu>;
770 };
771 };
772 };
773 };
774
775 &ipa {
776 qcom,gsi-loader = "self";
777 memory-region = <&ipa_fw_mem>;
778 firmware-name = "qcom/sm8550/ipa_fws.mbn";
779 status = "okay";
780 };
781
782 &gpi_dma1 {
783 status = "okay";
784 };
785
786 &gpu {
787 status = "okay";
788
789 zap-shader {
790 firmware-name = "qcom/sm8550/a740_zap.mbn";
791 };
792 };
793
794 &lpass_tlmm {
795 spkr_1_sd_n_active: spkr-1-sd-n-active-state {
796 pins = "gpio17";
797 function = "gpio";
798 drive-strength = <16>;
799 bias-disable;
800 output-low;
801 };
802
803 spkr_2_sd_n_active: spkr-2-sd-n-active-state {
804 pins = "gpio18";
805 function = "gpio";
806 drive-strength = <16>;
807 bias-disable;
808 output-low;
809 };
810 };
811
812 &mdss {
813 status = "okay";
814 };
815
816 &mdss_dsi0 {
817 vdda-supply = <&vreg_l3e_1p2>;
818 status = "okay";
819
820 panel@0 {
821 compatible = "visionox,vtdr6130";
822 reg = <0>;
823
824 pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>;
825 pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>;
826 pinctrl-names = "default", "sleep";
827
828 vci-supply = <&vreg_l13b_3p0>;
829 vdd-supply = <&vreg_l11b_1p2>;
830 vddio-supply = <&vreg_l12b_1p8>;
831
832 reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
833
834 port {
835 panel0_in: endpoint {
836 remote-endpoint = <&mdss_dsi0_out>;
837 };
838 };
839 };
840 };
841
842 &mdss_dsi0_out {
843 remote-endpoint = <&panel0_in>;
844 data-lanes = <0 1 2 3>;
845 };
846
847 &mdss_dsi0_phy {
848 vdds-supply = <&vreg_l1e_0p88>;
849 status = "okay";
850 };
851
852 &mdss_dp0 {
853 status = "okay";
854 };
855
856 &mdss_dp0_out {
857 data-lanes = <0 1>;
858 };
859
860 &pcie0 {
861 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
862 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
863
864 pinctrl-0 = <&pcie0_default_state>;
865 pinctrl-names = "default";
866
867 status = "okay";
868 };
869
870 &pcieport0 {
871 wifi@0 {
872 compatible = "pci17cb,1107";
873 reg = <0x10000 0x0 0x0 0x0 0x0>;
874
875 vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
876 vddaon-supply = <&vreg_pmu_aon_0p59>;
877 vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
878 vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
879 vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
880 vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
881 vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
882 vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
883 vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
884 };
885 };
886
887 &pcie0_phy {
888 vdda-phy-supply = <&vreg_l1e_0p88>;
889 vdda-pll-supply = <&vreg_l3e_1p2>;
890
891 status = "okay";
892 };
893
894 &pm8550_flash {
895 status = "okay";
896
897 led-0 {
898 function = LED_FUNCTION_FLASH;
899 color = <LED_COLOR_ID_YELLOW>;
900 led-sources = <1>, <4>;
901 led-max-microamp = <500000>;
902 flash-max-microamp = <2000000>;
903 flash-max-timeout-us = <1280000>;
904 function-enumerator = <0>;
905 };
906
907 led-1 {
908 function = LED_FUNCTION_FLASH;
909 color = <LED_COLOR_ID_WHITE>;
910 led-sources = <2>, <3>;
911 led-max-microamp = <500000>;
912 flash-max-microamp = <2000000>;
913 flash-max-timeout-us = <1280000>;
914 function-enumerator = <1>;
915 };
916 };
917
918 &pm8550_gpios {
919 volume_up_n: volume-up-n-state {
920 pins = "gpio6";
921 function = "normal";
922 power-source = <1>;
923 bias-pull-up;
924 input-enable;
925 };
926 };
927
928 &pm8550_pwm {
929 status = "okay";
930
931 multi-led {
932 color = <LED_COLOR_ID_RGB>;
933 function = LED_FUNCTION_STATUS;
934
935 #address-cells = <1>;
936 #size-cells = <0>;
937
938 led@1 {
939 reg = <1>;
940 color = <LED_COLOR_ID_RED>;
941 };
942
943 led@2 {
944 reg = <2>;
945 color = <LED_COLOR_ID_GREEN>;
946 };
947
948 led@3 {
949 reg = <3>;
950 color = <LED_COLOR_ID_BLUE>;
951 };
952 };
953 };
954
955 &pm8550b_eusb2_repeater {
956 vdd18-supply = <&vreg_l15b_1p8>;
957 vdd3-supply = <&vreg_l5b_3p1>;
958 };
959
960 &pon_pwrkey {
961 status = "okay";
962 };
963
964 &pon_resin {
965 linux,code = <KEY_VOLUMEDOWN>;
966
967 status = "okay";
968 };
969
970 &pmk8550_gpios {
971 pmk8550_sleep_clk: sleep-clk-state {
972 pins = "gpio3";
973 function = "func1";
974 input-disable;
975 output-enable;
976 bias-disable;
977 power-source = <0>;
978 };
979 };
980
981 &qupv3_id_0 {
982 status = "okay";
983 };
984
985 &qupv3_id_1 {
986 status = "okay";
987 };
988
989 &remoteproc_adsp {
990 firmware-name = "qcom/sm8550/adsp.mbn",
991 "qcom/sm8550/adsp_dtb.mbn";
992 status = "okay";
993 };
994
995 &remoteproc_cdsp {
996 firmware-name = "qcom/sm8550/cdsp.mbn",
997 "qcom/sm8550/cdsp_dtb.mbn";
998 status = "okay";
999 };
1000
1001 &remoteproc_mpss {
1002 firmware-name = "qcom/sm8550/modem.mbn",
1003 "qcom/sm8550/modem_dtb.mbn";
1004 status = "okay";
1005 };
1006
1007 &sleep_clk {
1008 clock-frequency = <32000>;
1009 };
1010
1011 &swr0 {
1012 status = "okay";
1013
1014 /* WSA8845, Speaker North */
1015 north_spkr: speaker@0,0 {
1016 compatible = "sdw20217020400";
1017 reg = <0 0>;
1018 pinctrl-names = "default";
1019 pinctrl-0 = <&spkr_1_sd_n_active>;
1020 powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>;
1021 #sound-dai-cells = <0>;
1022 sound-name-prefix = "SpkrLeft";
1023 vdd-1p8-supply = <&vreg_l15b_1p8>;
1024 vdd-io-supply = <&vreg_l3g_1p2>;
1025 qcom,port-mapping = <1 2 3 7 10 13>;
1026 };
1027
1028 /* WSA8845, Speaker South */
1029 south_spkr: speaker@0,1 {
1030 compatible = "sdw20217020400";
1031 reg = <0 1>;
1032 pinctrl-names = "default";
1033 pinctrl-0 = <&spkr_2_sd_n_active>;
1034 powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
1035 #sound-dai-cells = <0>;
1036 sound-name-prefix = "SpkrRight";
1037 vdd-1p8-supply = <&vreg_l15b_1p8>;
1038 vdd-io-supply = <&vreg_l3g_1p2>;
1039 qcom,port-mapping = <4 5 6 7 11 13>;
1040 };
1041 };
1042
1043 &spi4 {
1044 status = "okay";
1045
1046 touchscreen@0 {
1047 compatible = "goodix,gt9916";
1048 reg = <0>;
1049
1050 interrupt-parent = <&tlmm>;
1051 interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
1052
1053 reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
1054
1055 avdd-supply = <&vreg_l14b_3p2>;
1056
1057 spi-max-frequency = <1000000>;
1058
1059 touchscreen-size-x = <1080>;
1060 touchscreen-size-y = <2400>;
1061
1062 pinctrl-names = "default";
1063 pinctrl-0 = <&ts_irq>, <&ts_reset>;
1064 };
1065 };
1066
1067 &swr1 {
1068 status = "okay";
1069
1070 /* WCD9385 RX */
1071 wcd_rx: codec@0,4 {
1072 compatible = "sdw20217010d00";
1073 reg = <0 4>;
1074 qcom,rx-port-mapping = <1 2 3 4 5>;
1075 };
1076 };
1077
1078 &swr2 {
1079 status = "okay";
1080
1081 /* WCD9385 TX */
1082 wcd_tx: codec@0,3 {
1083 compatible = "sdw20217010d00";
1084 reg = <0 3>;
1085 qcom,tx-port-mapping = <2 2 3 4>;
1086 };
1087 };
1088
1089 &tlmm {
1090 gpio-reserved-ranges = <32 8>;
1091
1092 bt_default: bt-default-state {
1093 bt-en-pins {
1094 pins = "gpio81";
1095 function = "gpio";
1096 drive-strength = <16>;
1097 bias-disable;
1098 };
1099
1100 sw-ctrl-pins {
1101 pins = "gpio82";
1102 function = "gpio";
1103 bias-pull-down;
1104 };
1105 };
1106
1107 sde_dsi_active: sde-dsi-active-state {
1108 pins = "gpio133";
1109 function = "gpio";
1110 drive-strength = <8>;
1111 bias-disable;
1112 };
1113
1114 sde_dsi_suspend: sde-dsi-suspend-state {
1115 pins = "gpio133";
1116 function = "gpio";
1117 drive-strength = <2>;
1118 bias-pull-down;
1119 };
1120
1121 sde_te_active: sde-te-active-state {
1122 pins = "gpio86";
1123 function = "mdp_vsync";
1124 drive-strength = <2>;
1125 bias-pull-down;
1126 };
1127
1128 sde_te_suspend: sde-te-suspend-state {
1129 pins = "gpio86";
1130 function = "mdp_vsync";
1131 drive-strength = <2>;
1132 bias-pull-down;
1133 };
1134
1135 ts_irq: ts-irq-state {
1136 pins = "gpio25";
1137 function = "gpio";
1138 drive-strength = <8>;
1139 bias-pull-up;
1140 };
1141
1142 ts_reset: ts-reset-state {
1143 pins = "gpio24";
1144 function = "gpio";
1145 drive-strength = <8>;
1146 bias-pull-up;
1147 };
1148
1149 wcd_default: wcd-reset-n-active-state {
1150 pins = "gpio108";
1151 function = "gpio";
1152 drive-strength = <16>;
1153 bias-disable;
1154 output-low;
1155 };
1156
1157 wlan_en: wlan-en-state {
1158 pins = "gpio80";
1159 function = "gpio";
1160 drive-strength = <8>;
1161 bias-pull-down;
1162 };
1163 };
1164
1165 &uart7 {
1166 status = "okay";
1167 };
1168
1169 &uart14 {
1170 status = "okay";
1171
1172 bluetooth {
1173 compatible = "qcom,wcn7850-bt";
1174
1175 vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
1176 vddaon-supply = <&vreg_pmu_aon_0p59>;
1177 vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
1178 vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
1179 vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
1180 vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
1181 vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
1182
1183 max-speed = <3200000>;
1184 };
1185 };
1186
1187 &ufs_mem_hc {
1188 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
1189 vcc-supply = <&vreg_l17b_2p5>;
1190 vcc-max-microamp = <1300000>;
1191 vccq-supply = <&vreg_l1g_1p2>;
1192 vccq-max-microamp = <1200000>;
1193 vdd-hba-supply = <&vreg_l3g_1p2>;
1194
1195 status = "okay";
1196 };
1197
1198 &ufs_mem_phy {
1199 vdda-phy-supply = <&vreg_l1d_0p88>;
1200 vdda-pll-supply = <&vreg_l3e_1p2>;
1201
1202 status = "okay";
1203 };
1204
1205 &usb_1 {
1206 status = "okay";
1207 };
1208
1209 &usb_1_dwc3_hs {
1210 remote-endpoint = <&pmic_glink_hs_in>;
1211 };
1212
1213 &usb_1_hsphy {
1214 vdd-supply = <&vreg_l1e_0p88>;
1215 vdda12-supply = <&vreg_l3e_1p2>;
1216
1217 phys = <&pm8550b_eusb2_repeater>;
1218
1219 status = "okay";
1220 };
1221
1222 &usb_dp_qmpphy {
1223 vdda-phy-supply = <&vreg_l3e_1p2>;
1224 vdda-pll-supply = <&vreg_l3f_0p88>;
1225
1226 status = "okay";
1227 };
1228
1229 &usb_dp_qmpphy_out {
1230 remote-endpoint = <&redriver_ss_in>;
1231 };
1232
1233 &xo_board {
1234 clock-frequency = <76800000>;
1235 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.