~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/scripts/dtc/include-prefixes/arm64/qcom/sm8550.dtsi

Version: ~ [ linux-6.12-rc7 ] ~ [ linux-6.11.7 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.60 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.116 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.171 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.229 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.285 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.323 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.12 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 // SPDX-License-Identifier: BSD-3-Clause
  2 /*
  3  * Copyright (c) 2022, Linaro Limited
  4  */
  5 
  6 #include <dt-bindings/clock/qcom,rpmh.h>
  7 #include <dt-bindings/clock/qcom,sm8450-videocc.h>
  8 #include <dt-bindings/clock/qcom,sm8550-camcc.h>
  9 #include <dt-bindings/clock/qcom,sm8550-gcc.h>
 10 #include <dt-bindings/clock/qcom,sm8550-gpucc.h>
 11 #include <dt-bindings/clock/qcom,sm8550-tcsr.h>
 12 #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
 13 #include <dt-bindings/dma/qcom-gpi.h>
 14 #include <dt-bindings/firmware/qcom,scm.h>
 15 #include <dt-bindings/gpio/gpio.h>
 16 #include <dt-bindings/interrupt-controller/arm-gic.h>
 17 #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
 18 #include <dt-bindings/mailbox/qcom-ipcc.h>
 19 #include <dt-bindings/power/qcom-rpmpd.h>
 20 #include <dt-bindings/power/qcom,rpmhpd.h>
 21 #include <dt-bindings/soc/qcom,gpr.h>
 22 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 23 #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
 24 #include <dt-bindings/phy/phy-qcom-qmp.h>
 25 #include <dt-bindings/thermal/thermal.h>
 26 
 27 / {
 28         interrupt-parent = <&intc>;
 29 
 30         #address-cells = <2>;
 31         #size-cells = <2>;
 32 
 33         chosen { };
 34 
 35         clocks {
 36                 xo_board: xo-board {
 37                         compatible = "fixed-clock";
 38                         #clock-cells = <0>;
 39                 };
 40 
 41                 sleep_clk: sleep-clk {
 42                         compatible = "fixed-clock";
 43                         #clock-cells = <0>;
 44                 };
 45 
 46                 bi_tcxo_div2: bi-tcxo-div2-clk {
 47                         #clock-cells = <0>;
 48                         compatible = "fixed-factor-clock";
 49                         clocks = <&rpmhcc RPMH_CXO_CLK>;
 50                         clock-mult = <1>;
 51                         clock-div = <2>;
 52                 };
 53 
 54                 bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
 55                         #clock-cells = <0>;
 56                         compatible = "fixed-factor-clock";
 57                         clocks = <&rpmhcc RPMH_CXO_CLK_A>;
 58                         clock-mult = <1>;
 59                         clock-div = <2>;
 60                 };
 61         };
 62 
 63         cpus {
 64                 #address-cells = <2>;
 65                 #size-cells = <0>;
 66 
 67                 CPU0: cpu@0 {
 68                         device_type = "cpu";
 69                         compatible = "arm,cortex-a510";
 70                         reg = <0 0>;
 71                         clocks = <&cpufreq_hw 0>;
 72                         enable-method = "psci";
 73                         next-level-cache = <&L2_0>;
 74                         power-domains = <&CPU_PD0>;
 75                         power-domain-names = "psci";
 76                         qcom,freq-domain = <&cpufreq_hw 0>;
 77                         capacity-dmips-mhz = <1024>;
 78                         dynamic-power-coefficient = <100>;
 79                         #cooling-cells = <2>;
 80                         L2_0: l2-cache {
 81                                 compatible = "cache";
 82                                 cache-level = <2>;
 83                                 cache-unified;
 84                                 next-level-cache = <&L3_0>;
 85                                 L3_0: l3-cache {
 86                                         compatible = "cache";
 87                                         cache-level = <3>;
 88                                         cache-unified;
 89                                 };
 90                         };
 91                 };
 92 
 93                 CPU1: cpu@100 {
 94                         device_type = "cpu";
 95                         compatible = "arm,cortex-a510";
 96                         reg = <0 0x100>;
 97                         clocks = <&cpufreq_hw 0>;
 98                         enable-method = "psci";
 99                         next-level-cache = <&L2_100>;
100                         power-domains = <&CPU_PD1>;
101                         power-domain-names = "psci";
102                         qcom,freq-domain = <&cpufreq_hw 0>;
103                         capacity-dmips-mhz = <1024>;
104                         dynamic-power-coefficient = <100>;
105                         #cooling-cells = <2>;
106                         L2_100: l2-cache {
107                                 compatible = "cache";
108                                 cache-level = <2>;
109                                 cache-unified;
110                                 next-level-cache = <&L3_0>;
111                         };
112                 };
113 
114                 CPU2: cpu@200 {
115                         device_type = "cpu";
116                         compatible = "arm,cortex-a510";
117                         reg = <0 0x200>;
118                         clocks = <&cpufreq_hw 0>;
119                         enable-method = "psci";
120                         next-level-cache = <&L2_200>;
121                         power-domains = <&CPU_PD2>;
122                         power-domain-names = "psci";
123                         qcom,freq-domain = <&cpufreq_hw 0>;
124                         capacity-dmips-mhz = <1024>;
125                         dynamic-power-coefficient = <100>;
126                         #cooling-cells = <2>;
127                         L2_200: l2-cache {
128                                 compatible = "cache";
129                                 cache-level = <2>;
130                                 cache-unified;
131                                 next-level-cache = <&L3_0>;
132                         };
133                 };
134 
135                 CPU3: cpu@300 {
136                         device_type = "cpu";
137                         compatible = "arm,cortex-a715";
138                         reg = <0 0x300>;
139                         clocks = <&cpufreq_hw 1>;
140                         enable-method = "psci";
141                         next-level-cache = <&L2_300>;
142                         power-domains = <&CPU_PD3>;
143                         power-domain-names = "psci";
144                         qcom,freq-domain = <&cpufreq_hw 1>;
145                         capacity-dmips-mhz = <1792>;
146                         dynamic-power-coefficient = <270>;
147                         #cooling-cells = <2>;
148                         L2_300: l2-cache {
149                                 compatible = "cache";
150                                 cache-level = <2>;
151                                 cache-unified;
152                                 next-level-cache = <&L3_0>;
153                         };
154                 };
155 
156                 CPU4: cpu@400 {
157                         device_type = "cpu";
158                         compatible = "arm,cortex-a715";
159                         reg = <0 0x400>;
160                         clocks = <&cpufreq_hw 1>;
161                         enable-method = "psci";
162                         next-level-cache = <&L2_400>;
163                         power-domains = <&CPU_PD4>;
164                         power-domain-names = "psci";
165                         qcom,freq-domain = <&cpufreq_hw 1>;
166                         capacity-dmips-mhz = <1792>;
167                         dynamic-power-coefficient = <270>;
168                         #cooling-cells = <2>;
169                         L2_400: l2-cache {
170                                 compatible = "cache";
171                                 cache-level = <2>;
172                                 cache-unified;
173                                 next-level-cache = <&L3_0>;
174                         };
175                 };
176 
177                 CPU5: cpu@500 {
178                         device_type = "cpu";
179                         compatible = "arm,cortex-a710";
180                         reg = <0 0x500>;
181                         clocks = <&cpufreq_hw 1>;
182                         enable-method = "psci";
183                         next-level-cache = <&L2_500>;
184                         power-domains = <&CPU_PD5>;
185                         power-domain-names = "psci";
186                         qcom,freq-domain = <&cpufreq_hw 1>;
187                         capacity-dmips-mhz = <1792>;
188                         dynamic-power-coefficient = <270>;
189                         #cooling-cells = <2>;
190                         L2_500: l2-cache {
191                                 compatible = "cache";
192                                 cache-level = <2>;
193                                 cache-unified;
194                                 next-level-cache = <&L3_0>;
195                         };
196                 };
197 
198                 CPU6: cpu@600 {
199                         device_type = "cpu";
200                         compatible = "arm,cortex-a710";
201                         reg = <0 0x600>;
202                         clocks = <&cpufreq_hw 1>;
203                         enable-method = "psci";
204                         next-level-cache = <&L2_600>;
205                         power-domains = <&CPU_PD6>;
206                         power-domain-names = "psci";
207                         qcom,freq-domain = <&cpufreq_hw 1>;
208                         capacity-dmips-mhz = <1792>;
209                         dynamic-power-coefficient = <270>;
210                         #cooling-cells = <2>;
211                         L2_600: l2-cache {
212                                 compatible = "cache";
213                                 cache-level = <2>;
214                                 cache-unified;
215                                 next-level-cache = <&L3_0>;
216                         };
217                 };
218 
219                 CPU7: cpu@700 {
220                         device_type = "cpu";
221                         compatible = "arm,cortex-x3";
222                         reg = <0 0x700>;
223                         clocks = <&cpufreq_hw 2>;
224                         enable-method = "psci";
225                         next-level-cache = <&L2_700>;
226                         power-domains = <&CPU_PD7>;
227                         power-domain-names = "psci";
228                         qcom,freq-domain = <&cpufreq_hw 2>;
229                         capacity-dmips-mhz = <1894>;
230                         dynamic-power-coefficient = <588>;
231                         #cooling-cells = <2>;
232                         L2_700: l2-cache {
233                                 compatible = "cache";
234                                 cache-level = <2>;
235                                 cache-unified;
236                                 next-level-cache = <&L3_0>;
237                         };
238                 };
239 
240                 cpu-map {
241                         cluster0 {
242                                 core0 {
243                                         cpu = <&CPU0>;
244                                 };
245 
246                                 core1 {
247                                         cpu = <&CPU1>;
248                                 };
249 
250                                 core2 {
251                                         cpu = <&CPU2>;
252                                 };
253 
254                                 core3 {
255                                         cpu = <&CPU3>;
256                                 };
257 
258                                 core4 {
259                                         cpu = <&CPU4>;
260                                 };
261 
262                                 core5 {
263                                         cpu = <&CPU5>;
264                                 };
265 
266                                 core6 {
267                                         cpu = <&CPU6>;
268                                 };
269 
270                                 core7 {
271                                         cpu = <&CPU7>;
272                                 };
273                         };
274                 };
275 
276                 idle-states {
277                         entry-method = "psci";
278 
279                         LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
280                                 compatible = "arm,idle-state";
281                                 idle-state-name = "silver-rail-power-collapse";
282                                 arm,psci-suspend-param = <0x40000004>;
283                                 entry-latency-us = <550>;
284                                 exit-latency-us = <750>;
285                                 min-residency-us = <6700>;
286                                 local-timer-stop;
287                         };
288 
289                         BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
290                                 compatible = "arm,idle-state";
291                                 idle-state-name = "gold-rail-power-collapse";
292                                 arm,psci-suspend-param = <0x40000004>;
293                                 entry-latency-us = <600>;
294                                 exit-latency-us = <1300>;
295                                 min-residency-us = <8136>;
296                                 local-timer-stop;
297                         };
298 
299                         PRIME_CPU_SLEEP_0: cpu-sleep-2-0 {
300                                 compatible = "arm,idle-state";
301                                 idle-state-name = "goldplus-rail-power-collapse";
302                                 arm,psci-suspend-param = <0x40000004>;
303                                 entry-latency-us = <500>;
304                                 exit-latency-us = <1350>;
305                                 min-residency-us = <7480>;
306                                 local-timer-stop;
307                         };
308                 };
309 
310                 domain-idle-states {
311                         CLUSTER_SLEEP_0: cluster-sleep-0 {
312                                 compatible = "domain-idle-state";
313                                 arm,psci-suspend-param = <0x41000044>;
314                                 entry-latency-us = <750>;
315                                 exit-latency-us = <2350>;
316                                 min-residency-us = <9144>;
317                         };
318 
319                         CLUSTER_SLEEP_1: cluster-sleep-1 {
320                                 compatible = "domain-idle-state";
321                                 arm,psci-suspend-param = <0x4100c344>;
322                                 entry-latency-us = <2800>;
323                                 exit-latency-us = <4400>;
324                                 min-residency-us = <10150>;
325                         };
326                 };
327         };
328 
329         firmware {
330                 scm: scm {
331                         compatible = "qcom,scm-sm8550", "qcom,scm";
332                         qcom,dload-mode = <&tcsr 0x19000>;
333                         interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
334                 };
335         };
336 
337         clk_virt: interconnect-0 {
338                 compatible = "qcom,sm8550-clk-virt";
339                 #interconnect-cells = <2>;
340                 qcom,bcm-voters = <&apps_bcm_voter>;
341         };
342 
343         mc_virt: interconnect-1 {
344                 compatible = "qcom,sm8550-mc-virt";
345                 #interconnect-cells = <2>;
346                 qcom,bcm-voters = <&apps_bcm_voter>;
347         };
348 
349         memory@a0000000 {
350                 device_type = "memory";
351                 /* We expect the bootloader to fill in the size */
352                 reg = <0 0xa0000000 0 0>;
353         };
354 
355         pmu-a510 {
356                 compatible = "arm,cortex-a510-pmu";
357                 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
358         };
359 
360         pmu-a710 {
361                 compatible = "arm,cortex-a710-pmu";
362                 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
363         };
364 
365         pmu-a715 {
366                 compatible = "arm,cortex-a715-pmu";
367                 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
368         };
369 
370         pmu-x3 {
371                 compatible = "arm,cortex-x3-pmu";
372                 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
373         };
374 
375         psci {
376                 compatible = "arm,psci-1.0";
377                 method = "smc";
378 
379                 CPU_PD0: power-domain-cpu0 {
380                         #power-domain-cells = <0>;
381                         power-domains = <&CLUSTER_PD>;
382                         domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
383                 };
384 
385                 CPU_PD1: power-domain-cpu1 {
386                         #power-domain-cells = <0>;
387                         power-domains = <&CLUSTER_PD>;
388                         domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
389                 };
390 
391                 CPU_PD2: power-domain-cpu2 {
392                         #power-domain-cells = <0>;
393                         power-domains = <&CLUSTER_PD>;
394                         domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
395                 };
396 
397                 CPU_PD3: power-domain-cpu3 {
398                         #power-domain-cells = <0>;
399                         power-domains = <&CLUSTER_PD>;
400                         domain-idle-states = <&BIG_CPU_SLEEP_0>;
401                 };
402 
403                 CPU_PD4: power-domain-cpu4 {
404                         #power-domain-cells = <0>;
405                         power-domains = <&CLUSTER_PD>;
406                         domain-idle-states = <&BIG_CPU_SLEEP_0>;
407                 };
408 
409                 CPU_PD5: power-domain-cpu5 {
410                         #power-domain-cells = <0>;
411                         power-domains = <&CLUSTER_PD>;
412                         domain-idle-states = <&BIG_CPU_SLEEP_0>;
413                 };
414 
415                 CPU_PD6: power-domain-cpu6 {
416                         #power-domain-cells = <0>;
417                         power-domains = <&CLUSTER_PD>;
418                         domain-idle-states = <&BIG_CPU_SLEEP_0>;
419                 };
420 
421                 CPU_PD7: power-domain-cpu7 {
422                         #power-domain-cells = <0>;
423                         power-domains = <&CLUSTER_PD>;
424                         domain-idle-states = <&PRIME_CPU_SLEEP_0>;
425                 };
426 
427                 CLUSTER_PD: power-domain-cluster {
428                         #power-domain-cells = <0>;
429                         domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>;
430                 };
431         };
432 
433         reserved_memory: reserved-memory {
434                 #address-cells = <2>;
435                 #size-cells = <2>;
436                 ranges;
437 
438                 hyp_mem: hyp-region@80000000 {
439                         reg = <0 0x80000000 0 0xa00000>;
440                         no-map;
441                 };
442 
443                 cpusys_vm_mem: cpusys-vm-region@80a00000 {
444                         reg = <0 0x80a00000 0 0x400000>;
445                         no-map;
446                 };
447 
448                 hyp_tags_mem: hyp-tags-region@80e00000 {
449                         reg = <0 0x80e00000 0 0x3d0000>;
450                         no-map;
451                 };
452 
453                 xbl_sc_mem: xbl-sc-region@d8100000 {
454                         reg = <0 0xd8100000 0 0x40000>;
455                         no-map;
456                 };
457 
458                 hyp_tags_reserved_mem: hyp-tags-reserved-region@811d0000 {
459                         reg = <0 0x811d0000 0 0x30000>;
460                         no-map;
461                 };
462 
463                 /* merged xbl_dt_log, xbl_ramdump, aop_image */
464                 xbl_dt_log_merged_mem: xbl-dt-log-merged-region@81a00000 {
465                         reg = <0 0x81a00000 0 0x260000>;
466                         no-map;
467                 };
468 
469                 aop_cmd_db_mem: aop-cmd-db-region@81c60000 {
470                         compatible = "qcom,cmd-db";
471                         reg = <0 0x81c60000 0 0x20000>;
472                         no-map;
473                 };
474 
475                 /* merged aop_config, tme_crash_dump, tme_log, uefi_log */
476                 aop_config_merged_mem: aop-config-merged-region@81c80000 {
477                         reg = <0 0x81c80000 0 0x74000>;
478                         no-map;
479                 };
480 
481                 /* secdata region can be reused by apps */
482                 smem: smem@81d00000 {
483                         compatible = "qcom,smem";
484                         reg = <0 0x81d00000 0 0x200000>;
485                         hwlocks = <&tcsr_mutex 3>;
486                         no-map;
487                 };
488 
489                 adsp_mhi_mem: adsp-mhi-region@81f00000 {
490                         reg = <0 0x81f00000 0 0x20000>;
491                         no-map;
492                 };
493 
494                 global_sync_mem: global-sync-region@82600000 {
495                         reg = <0 0x82600000 0 0x100000>;
496                         no-map;
497                 };
498 
499                 tz_stat_mem: tz-stat-region@82700000 {
500                         reg = <0 0x82700000 0 0x100000>;
501                         no-map;
502                 };
503 
504                 cdsp_secure_heap_mem: cdsp-secure-heap-region@82800000 {
505                         reg = <0 0x82800000 0 0x4600000>;
506                         no-map;
507                 };
508 
509                 mpss_mem: mpss-region@8a800000 {
510                         reg = <0 0x8a800000 0 0x10800000>;
511                         no-map;
512                 };
513 
514                 q6_mpss_dtb_mem: q6-mpss-dtb-region@9b000000 {
515                         reg = <0 0x9b000000 0 0x80000>;
516                         no-map;
517                 };
518 
519                 ipa_fw_mem: ipa-fw-region@9b080000 {
520                         reg = <0 0x9b080000 0 0x10000>;
521                         no-map;
522                 };
523 
524                 ipa_gsi_mem: ipa-gsi-region@9b090000 {
525                         reg = <0 0x9b090000 0 0xa000>;
526                         no-map;
527                 };
528 
529                 gpu_micro_code_mem: gpu-micro-code-region@9b09a000 {
530                         reg = <0 0x9b09a000 0 0x2000>;
531                         no-map;
532                 };
533 
534                 spss_region_mem: spss-region@9b100000 {
535                         reg = <0 0x9b100000 0 0x180000>;
536                         no-map;
537                 };
538 
539                 /* First part of the "SPU secure shared memory" region */
540                 spu_tz_shared_mem: spu-tz-shared-region@9b280000 {
541                         reg = <0 0x9b280000 0 0x60000>;
542                         no-map;
543                 };
544 
545                 /* Second part of the "SPU secure shared memory" region */
546                 spu_modem_shared_mem: spu-modem-shared-region@9b2e0000 {
547                         reg = <0 0x9b2e0000 0 0x20000>;
548                         no-map;
549                 };
550 
551                 camera_mem: camera-region@9b300000 {
552                         reg = <0 0x9b300000 0 0x800000>;
553                         no-map;
554                 };
555 
556                 video_mem: video-region@9bb00000 {
557                         reg = <0 0x9bb00000 0 0x700000>;
558                         no-map;
559                 };
560 
561                 cvp_mem: cvp-region@9c200000 {
562                         reg = <0 0x9c200000 0 0x700000>;
563                         no-map;
564                 };
565 
566                 cdsp_mem: cdsp-region@9c900000 {
567                         reg = <0 0x9c900000 0 0x2000000>;
568                         no-map;
569                 };
570 
571                 q6_cdsp_dtb_mem: q6-cdsp-dtb-region@9e900000 {
572                         reg = <0 0x9e900000 0 0x80000>;
573                         no-map;
574                 };
575 
576                 q6_adsp_dtb_mem: q6-adsp-dtb-region@9e980000 {
577                         reg = <0 0x9e980000 0 0x80000>;
578                         no-map;
579                 };
580 
581                 adspslpi_mem: adspslpi-region@9ea00000 {
582                         reg = <0 0x9ea00000 0 0x4080000>;
583                         no-map;
584                 };
585 
586                 /* uefi region can be reused by apps */
587 
588                 /* Linux kernel image is loaded at 0xa8000000 */
589 
590                 rmtfs_mem: rmtfs-region@d4a80000 {
591                         compatible = "qcom,rmtfs-mem";
592                         reg = <0x0 0xd4a80000 0x0 0x280000>;
593                         no-map;
594 
595                         qcom,client-id = <1>;
596                         qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
597                 };
598 
599                 mpss_dsm_mem: mpss-dsm-region@d4d00000 {
600                         reg = <0 0xd4d00000 0 0x3300000>;
601                         no-map;
602                 };
603 
604                 tz_reserved_mem: tz-reserved-region@d8000000 {
605                         reg = <0 0xd8000000 0 0x100000>;
606                         no-map;
607                 };
608 
609                 cpucp_fw_mem: cpucp-fw-region@d8140000 {
610                         reg = <0 0xd8140000 0 0x1c0000>;
611                         no-map;
612                 };
613 
614                 qtee_mem: qtee-region@d8300000 {
615                         reg = <0 0xd8300000 0 0x500000>;
616                         no-map;
617                 };
618 
619                 ta_mem: ta-region@d8800000 {
620                         reg = <0 0xd8800000 0 0x8a00000>;
621                         no-map;
622                 };
623 
624                 tz_tags_mem: tz-tags-region@e1200000 {
625                         reg = <0 0xe1200000 0 0x2740000>;
626                         no-map;
627                 };
628 
629                 hwfence_shbuf: hwfence-shbuf-region@e6440000 {
630                         reg = <0 0xe6440000 0 0x279000>;
631                         no-map;
632                 };
633 
634                 trust_ui_vm_mem: trust-ui-vm-region@f3600000 {
635                         reg = <0 0xf3600000 0 0x4aee000>;
636                         no-map;
637                 };
638 
639                 trust_ui_vm_dump: trust-ui-vm-dump-region@f80ee000 {
640                         reg = <0 0xf80ee000 0 0x1000>;
641                         no-map;
642                 };
643 
644                 trust_ui_vm_qrtr: trust-ui-vm-qrt-region@f80ef000 {
645                         reg = <0 0xf80ef000 0 0x9000>;
646                         no-map;
647                 };
648 
649                 trust_ui_vm_vblk0_ring: trust-ui-vm-vblk0-ring-region@f80f8000 {
650                         reg = <0 0xf80f8000 0 0x4000>;
651                         no-map;
652                 };
653 
654                 trust_ui_vm_vblk1_ring: trust-ui-vm-vblk1-ring-region@f80fc000 {
655                         reg = <0 0xf80fc000 0 0x4000>;
656                         no-map;
657                 };
658 
659                 trust_ui_vm_swiotlb: trust-ui-vm-swiotlb-region@f8100000 {
660                         reg = <0 0xf8100000 0 0x100000>;
661                         no-map;
662                 };
663 
664                 oem_vm_mem: oem-vm-region@f8400000 {
665                         reg = <0 0xf8400000 0 0x4800000>;
666                         no-map;
667                 };
668 
669                 oem_vm_vblk0_ring: oem-vm-vblk0-ring-region@fcc00000 {
670                         reg = <0 0xfcc00000 0 0x4000>;
671                         no-map;
672                 };
673 
674                 oem_vm_swiotlb: oem-vm-swiotlb-region@fcc04000 {
675                         reg = <0 0xfcc04000 0 0x100000>;
676                         no-map;
677                 };
678 
679                 hyp_ext_tags_mem: hyp-ext-tags-region@fce00000 {
680                         reg = <0 0xfce00000 0 0x2900000>;
681                         no-map;
682                 };
683 
684                 hyp_ext_reserved_mem: hyp-ext-reserved-region@ff700000 {
685                         reg = <0 0xff700000 0 0x100000>;
686                         no-map;
687                 };
688         };
689 
690         smp2p-adsp {
691                 compatible = "qcom,smp2p";
692                 qcom,smem = <443>, <429>;
693                 interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
694                                              IPCC_MPROC_SIGNAL_SMP2P
695                                              IRQ_TYPE_EDGE_RISING>;
696                 mboxes = <&ipcc IPCC_CLIENT_LPASS
697                                 IPCC_MPROC_SIGNAL_SMP2P>;
698 
699                 qcom,local-pid = <0>;
700                 qcom,remote-pid = <2>;
701 
702                 smp2p_adsp_out: master-kernel {
703                         qcom,entry-name = "master-kernel";
704                         #qcom,smem-state-cells = <1>;
705                 };
706 
707                 smp2p_adsp_in: slave-kernel {
708                         qcom,entry-name = "slave-kernel";
709                         interrupt-controller;
710                         #interrupt-cells = <2>;
711                 };
712         };
713 
714         smp2p-cdsp {
715                 compatible = "qcom,smp2p";
716                 qcom,smem = <94>, <432>;
717                 interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
718                                              IPCC_MPROC_SIGNAL_SMP2P
719                                              IRQ_TYPE_EDGE_RISING>;
720                 mboxes = <&ipcc IPCC_CLIENT_CDSP
721                                 IPCC_MPROC_SIGNAL_SMP2P>;
722 
723                 qcom,local-pid = <0>;
724                 qcom,remote-pid = <5>;
725 
726                 smp2p_cdsp_out: master-kernel {
727                         qcom,entry-name = "master-kernel";
728                         #qcom,smem-state-cells = <1>;
729                 };
730 
731                 smp2p_cdsp_in: slave-kernel {
732                         qcom,entry-name = "slave-kernel";
733                         interrupt-controller;
734                         #interrupt-cells = <2>;
735                 };
736         };
737 
738         smp2p-modem {
739                 compatible = "qcom,smp2p";
740                 qcom,smem = <435>, <428>;
741                 interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
742                                              IPCC_MPROC_SIGNAL_SMP2P
743                                              IRQ_TYPE_EDGE_RISING>;
744                 mboxes = <&ipcc IPCC_CLIENT_MPSS
745                                 IPCC_MPROC_SIGNAL_SMP2P>;
746 
747                 qcom,local-pid = <0>;
748                 qcom,remote-pid = <1>;
749 
750                 smp2p_modem_out: master-kernel {
751                         qcom,entry-name = "master-kernel";
752                         #qcom,smem-state-cells = <1>;
753                 };
754 
755                 smp2p_modem_in: slave-kernel {
756                         qcom,entry-name = "slave-kernel";
757                         interrupt-controller;
758                         #interrupt-cells = <2>;
759                 };
760 
761                 ipa_smp2p_out: ipa-ap-to-modem {
762                         qcom,entry-name = "ipa";
763                         #qcom,smem-state-cells = <1>;
764                 };
765 
766                 ipa_smp2p_in: ipa-modem-to-ap {
767                         qcom,entry-name = "ipa";
768                         interrupt-controller;
769                         #interrupt-cells = <2>;
770                 };
771         };
772 
773         soc: soc@0 {
774                 compatible = "simple-bus";
775                 ranges = <0 0 0 0 0x10 0>;
776                 dma-ranges = <0 0 0 0 0x10 0>;
777 
778                 #address-cells = <2>;
779                 #size-cells = <2>;
780 
781                 gcc: clock-controller@100000 {
782                         compatible = "qcom,sm8550-gcc";
783                         reg = <0 0x00100000 0 0x1f4200>;
784                         #clock-cells = <1>;
785                         #reset-cells = <1>;
786                         #power-domain-cells = <1>;
787                         clocks = <&bi_tcxo_div2>, <&sleep_clk>,
788                                  <&pcie0_phy>,
789                                  <&pcie1_phy QMP_PCIE_PIPE_CLK>,
790                                  <&pcie1_phy QMP_PCIE_PHY_AUX_CLK>,
791                                  <&ufs_mem_phy 0>,
792                                  <&ufs_mem_phy 1>,
793                                  <&ufs_mem_phy 2>,
794                                  <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
795                 };
796 
797                 ipcc: mailbox@408000 {
798                         compatible = "qcom,sm8550-ipcc", "qcom,ipcc";
799                         reg = <0 0x00408000 0 0x1000>;
800                         interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
801                         interrupt-controller;
802                         #interrupt-cells = <3>;
803                         #mbox-cells = <2>;
804                 };
805 
806                 gpi_dma2: dma-controller@800000 {
807                         compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
808                         #dma-cells = <3>;
809                         reg = <0 0x00800000 0 0x60000>;
810                         interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
811                                      <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
812                                      <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
813                                      <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
814                                      <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
815                                      <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
816                                      <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
817                                      <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
818                                      <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
819                                      <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
820                                      <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
821                                      <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
822                         dma-channels = <12>;
823                         dma-channel-mask = <0x3e>;
824                         iommus = <&apps_smmu 0x436 0>;
825                         dma-coherent;
826                         status = "disabled";
827                 };
828 
829                 qupv3_id_1: geniqup@8c0000 {
830                         compatible = "qcom,geni-se-qup";
831                         reg = <0 0x008c0000 0 0x2000>;
832                         ranges;
833                         clock-names = "m-ahb", "s-ahb";
834                         clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
835                                  <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
836                         iommus = <&apps_smmu 0x423 0>;
837                         dma-coherent;
838                         #address-cells = <2>;
839                         #size-cells = <2>;
840                         status = "disabled";
841 
842                         i2c8: i2c@880000 {
843                                 compatible = "qcom,geni-i2c";
844                                 reg = <0 0x00880000 0 0x4000>;
845                                 clock-names = "se";
846                                 clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
847                                 pinctrl-names = "default";
848                                 pinctrl-0 = <&qup_i2c8_data_clk>;
849                                 interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
850                                 #address-cells = <1>;
851                                 #size-cells = <0>;
852                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
853                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
854                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
855                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
856                                 dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
857                                        <&gpi_dma2 1 0 QCOM_GPI_I2C>;
858                                 dma-names = "tx", "rx";
859                                 status = "disabled";
860                         };
861 
862                         spi8: spi@880000 {
863                                 compatible = "qcom,geni-spi";
864                                 reg = <0 0x00880000 0 0x4000>;
865                                 clock-names = "se";
866                                 clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
867                                 interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
868                                 pinctrl-names = "default";
869                                 pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
870                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
871                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
872                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
873                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
874                                 dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
875                                        <&gpi_dma2 1 0 QCOM_GPI_SPI>;
876                                 dma-names = "tx", "rx";
877                                 #address-cells = <1>;
878                                 #size-cells = <0>;
879                                 status = "disabled";
880                         };
881 
882                         i2c9: i2c@884000 {
883                                 compatible = "qcom,geni-i2c";
884                                 reg = <0 0x00884000 0 0x4000>;
885                                 clock-names = "se";
886                                 clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
887                                 pinctrl-names = "default";
888                                 pinctrl-0 = <&qup_i2c9_data_clk>;
889                                 interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
890                                 #address-cells = <1>;
891                                 #size-cells = <0>;
892                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
893                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
894                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
895                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
896                                 dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
897                                        <&gpi_dma2 1 1 QCOM_GPI_I2C>;
898                                 dma-names = "tx", "rx";
899                                 status = "disabled";
900                         };
901 
902                         spi9: spi@884000 {
903                                 compatible = "qcom,geni-spi";
904                                 reg = <0 0x00884000 0 0x4000>;
905                                 clock-names = "se";
906                                 clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
907                                 interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
908                                 pinctrl-names = "default";
909                                 pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
910                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
911                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
912                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
913                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
914                                 dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
915                                        <&gpi_dma2 1 1 QCOM_GPI_SPI>;
916                                 dma-names = "tx", "rx";
917                                 #address-cells = <1>;
918                                 #size-cells = <0>;
919                                 status = "disabled";
920                         };
921 
922                         i2c10: i2c@888000 {
923                                 compatible = "qcom,geni-i2c";
924                                 reg = <0 0x00888000 0 0x4000>;
925                                 clock-names = "se";
926                                 clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
927                                 pinctrl-names = "default";
928                                 pinctrl-0 = <&qup_i2c10_data_clk>;
929                                 interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
930                                 #address-cells = <1>;
931                                 #size-cells = <0>;
932                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
933                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
934                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
935                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
936                                 dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
937                                        <&gpi_dma2 1 2 QCOM_GPI_I2C>;
938                                 dma-names = "tx", "rx";
939                                 status = "disabled";
940                         };
941 
942                         spi10: spi@888000 {
943                                 compatible = "qcom,geni-spi";
944                                 reg = <0 0x00888000 0 0x4000>;
945                                 clock-names = "se";
946                                 clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
947                                 interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
948                                 pinctrl-names = "default";
949                                 pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
950                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
951                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
952                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
953                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
954                                 dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
955                                        <&gpi_dma2 1 2 QCOM_GPI_SPI>;
956                                 dma-names = "tx", "rx";
957                                 #address-cells = <1>;
958                                 #size-cells = <0>;
959                                 status = "disabled";
960                         };
961 
962                         i2c11: i2c@88c000 {
963                                 compatible = "qcom,geni-i2c";
964                                 reg = <0 0x0088c000 0 0x4000>;
965                                 clock-names = "se";
966                                 clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
967                                 pinctrl-names = "default";
968                                 pinctrl-0 = <&qup_i2c11_data_clk>;
969                                 interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
970                                 #address-cells = <1>;
971                                 #size-cells = <0>;
972                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
973                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
974                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
975                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
976                                 dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
977                                        <&gpi_dma2 1 3 QCOM_GPI_I2C>;
978                                 dma-names = "tx", "rx";
979                                 status = "disabled";
980                         };
981 
982                         spi11: spi@88c000 {
983                                 compatible = "qcom,geni-spi";
984                                 reg = <0 0x0088c000 0 0x4000>;
985                                 clock-names = "se";
986                                 clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
987                                 interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
988                                 pinctrl-names = "default";
989                                 pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
990                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
991                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
992                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
993                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
994                                 dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
995                                        <&gpi_dma2 1 3 QCOM_GPI_I2C>;
996                                 dma-names = "tx", "rx";
997                                 #address-cells = <1>;
998                                 #size-cells = <0>;
999                                 status = "disabled";
1000                         };
1001 
1002                         i2c12: i2c@890000 {
1003                                 compatible = "qcom,geni-i2c";
1004                                 reg = <0 0x00890000 0 0x4000>;
1005                                 clock-names = "se";
1006                                 clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
1007                                 pinctrl-names = "default";
1008                                 pinctrl-0 = <&qup_i2c12_data_clk>;
1009                                 interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
1010                                 #address-cells = <1>;
1011                                 #size-cells = <0>;
1012                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1013                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
1014                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
1015                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1016                                 dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
1017                                        <&gpi_dma2 1 4 QCOM_GPI_I2C>;
1018                                 dma-names = "tx", "rx";
1019                                 status = "disabled";
1020                         };
1021 
1022                         spi12: spi@890000 {
1023                                 compatible = "qcom,geni-spi";
1024                                 reg = <0 0x00890000 0 0x4000>;
1025                                 clock-names = "se";
1026                                 clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
1027                                 interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
1028                                 pinctrl-names = "default";
1029                                 pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
1030                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1031                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
1032                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
1033                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1034                                 dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
1035                                        <&gpi_dma2 1 4 QCOM_GPI_I2C>;
1036                                 dma-names = "tx", "rx";
1037                                 #address-cells = <1>;
1038                                 #size-cells = <0>;
1039                                 status = "disabled";
1040                         };
1041 
1042                         i2c13: i2c@894000 {
1043                                 compatible = "qcom,geni-i2c";
1044                                 reg = <0 0x00894000 0 0x4000>;
1045                                 clock-names = "se";
1046                                 clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
1047                                 pinctrl-names = "default";
1048                                 pinctrl-0 = <&qup_i2c13_data_clk>;
1049                                 interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
1050                                 #address-cells = <1>;
1051                                 #size-cells = <0>;
1052                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1053                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
1054                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
1055                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1056                                 dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
1057                                        <&gpi_dma2 1 5 QCOM_GPI_I2C>;
1058                                 dma-names = "tx", "rx";
1059                                 status = "disabled";
1060                         };
1061 
1062                         spi13: spi@894000 {
1063                                 compatible = "qcom,geni-spi";
1064                                 reg = <0 0x00894000 0 0x4000>;
1065                                 clock-names = "se";
1066                                 clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
1067                                 interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
1068                                 pinctrl-names = "default";
1069                                 pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
1070                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1071                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
1072                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
1073                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1074                                 dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
1075                                        <&gpi_dma2 1 5 QCOM_GPI_SPI>;
1076                                 dma-names = "tx", "rx";
1077                                 #address-cells = <1>;
1078                                 #size-cells = <0>;
1079                                 status = "disabled";
1080                         };
1081 
1082                         uart14: serial@898000 {
1083                                 compatible = "qcom,geni-uart";
1084                                 reg = <0 0x898000 0 0x4000>;
1085                                 clock-names = "se";
1086                                 clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
1087                                 pinctrl-names = "default";
1088                                 pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>;
1089                                 interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
1090                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1091                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>;
1092                                 interconnect-names = "qup-core", "qup-config";
1093                                 status = "disabled";
1094                         };
1095 
1096                         i2c15: i2c@89c000 {
1097                                 compatible = "qcom,geni-i2c";
1098                                 reg = <0 0x0089c000 0 0x4000>;
1099                                 clock-names = "se";
1100                                 clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
1101                                 pinctrl-names = "default";
1102                                 pinctrl-0 = <&qup_i2c15_data_clk>;
1103                                 interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
1104                                 #address-cells = <1>;
1105                                 #size-cells = <0>;
1106                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1107                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
1108                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
1109                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1110                                 dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
1111                                        <&gpi_dma2 1 7 QCOM_GPI_I2C>;
1112                                 dma-names = "tx", "rx";
1113                                 status = "disabled";
1114                         };
1115 
1116                         spi15: spi@89c000 {
1117                                 compatible = "qcom,geni-spi";
1118                                 reg = <0 0x0089c000 0 0x4000>;
1119                                 clock-names = "se";
1120                                 clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
1121                                 interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
1122                                 pinctrl-names = "default";
1123                                 pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
1124                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1125                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
1126                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
1127                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1128                                 dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
1129                                        <&gpi_dma2 1 7 QCOM_GPI_SPI>;
1130                                 dma-names = "tx", "rx";
1131                                 #address-cells = <1>;
1132                                 #size-cells = <0>;
1133                                 status = "disabled";
1134                         };
1135                 };
1136 
1137                 i2c_master_hub_0: geniqup@9c0000 {
1138                         compatible = "qcom,geni-se-i2c-master-hub";
1139                         reg = <0x0 0x009c0000 0x0 0x2000>;
1140                         clock-names = "s-ahb";
1141                         clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>;
1142                         #address-cells = <2>;
1143                         #size-cells = <2>;
1144                         ranges;
1145                         status = "disabled";
1146 
1147                         i2c_hub_0: i2c@980000 {
1148                                 compatible = "qcom,geni-i2c-master-hub";
1149                                 reg = <0x0 0x00980000 0x0 0x4000>;
1150                                 clock-names = "se", "core";
1151                                 clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>,
1152                                          <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1153                                 pinctrl-names = "default";
1154                                 pinctrl-0 = <&hub_i2c0_data_clk>;
1155                                 interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
1156                                 #address-cells = <1>;
1157                                 #size-cells = <0>;
1158                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1159                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1160                                 interconnect-names = "qup-core", "qup-config";
1161                                 status = "disabled";
1162                         };
1163 
1164                         i2c_hub_1: i2c@984000 {
1165                                 compatible = "qcom,geni-i2c-master-hub";
1166                                 reg = <0x0 0x00984000 0x0 0x4000>;
1167                                 clock-names = "se", "core";
1168                                 clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>,
1169                                          <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1170                                 pinctrl-names = "default";
1171                                 pinctrl-0 = <&hub_i2c1_data_clk>;
1172                                 interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
1173                                 #address-cells = <1>;
1174                                 #size-cells = <0>;
1175                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1176                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1177                                 interconnect-names = "qup-core", "qup-config";
1178                                 status = "disabled";
1179                         };
1180 
1181                         i2c_hub_2: i2c@988000 {
1182                                 compatible = "qcom,geni-i2c-master-hub";
1183                                 reg = <0x0 0x00988000 0x0 0x4000>;
1184                                 clock-names = "se", "core";
1185                                 clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>,
1186                                          <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1187                                 pinctrl-names = "default";
1188                                 pinctrl-0 = <&hub_i2c2_data_clk>;
1189                                 interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
1190                                 #address-cells = <1>;
1191                                 #size-cells = <0>;
1192                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1193                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1194                                 interconnect-names = "qup-core", "qup-config";
1195                                 status = "disabled";
1196                         };
1197 
1198                         i2c_hub_3: i2c@98c000 {
1199                                 compatible = "qcom,geni-i2c-master-hub";
1200                                 reg = <0x0 0x0098c000 0x0 0x4000>;
1201                                 clock-names = "se", "core";
1202                                 clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>,
1203                                          <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1204                                 pinctrl-names = "default";
1205                                 pinctrl-0 = <&hub_i2c3_data_clk>;
1206                                 interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
1207                                 #address-cells = <1>;
1208                                 #size-cells = <0>;
1209                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1210                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1211                                 interconnect-names = "qup-core", "qup-config";
1212                                 status = "disabled";
1213                         };
1214 
1215                         i2c_hub_4: i2c@990000 {
1216                                 compatible = "qcom,geni-i2c-master-hub";
1217                                 reg = <0x0 0x00990000 0x0 0x4000>;
1218                                 clock-names = "se", "core";
1219                                 clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>,
1220                                          <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1221                                 pinctrl-names = "default";
1222                                 pinctrl-0 = <&hub_i2c4_data_clk>;
1223                                 interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
1224                                 #address-cells = <1>;
1225                                 #size-cells = <0>;
1226                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1227                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1228                                 interconnect-names = "qup-core", "qup-config";
1229                                 status = "disabled";
1230                         };
1231 
1232                         i2c_hub_5: i2c@994000 {
1233                                 compatible = "qcom,geni-i2c-master-hub";
1234                                 reg = <0 0x00994000 0 0x4000>;
1235                                 clock-names = "se", "core";
1236                                 clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>,
1237                                          <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1238                                 pinctrl-names = "default";
1239                                 pinctrl-0 = <&hub_i2c5_data_clk>;
1240                                 interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
1241                                 #address-cells = <1>;
1242                                 #size-cells = <0>;
1243                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1244                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1245                                 interconnect-names = "qup-core", "qup-config";
1246                                 status = "disabled";
1247                         };
1248 
1249                         i2c_hub_6: i2c@998000 {
1250                                 compatible = "qcom,geni-i2c-master-hub";
1251                                 reg = <0 0x00998000 0 0x4000>;
1252                                 clock-names = "se", "core";
1253                                 clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>,
1254                                          <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1255                                 pinctrl-names = "default";
1256                                 pinctrl-0 = <&hub_i2c6_data_clk>;
1257                                 interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
1258                                 #address-cells = <1>;
1259                                 #size-cells = <0>;
1260                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1261                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1262                                 interconnect-names = "qup-core", "qup-config";
1263                                 status = "disabled";
1264                         };
1265 
1266                         i2c_hub_7: i2c@99c000 {
1267                                 compatible = "qcom,geni-i2c-master-hub";
1268                                 reg = <0 0x0099c000 0 0x4000>;
1269                                 clock-names = "se", "core";
1270                                 clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>,
1271                                          <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1272                                 pinctrl-names = "default";
1273                                 pinctrl-0 = <&hub_i2c7_data_clk>;
1274                                 interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
1275                                 #address-cells = <1>;
1276                                 #size-cells = <0>;
1277                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1278                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1279                                 interconnect-names = "qup-core", "qup-config";
1280                                 status = "disabled";
1281                         };
1282 
1283                         i2c_hub_8: i2c@9a0000 {
1284                                 compatible = "qcom,geni-i2c-master-hub";
1285                                 reg = <0 0x009a0000 0 0x4000>;
1286                                 clock-names = "se", "core";
1287                                 clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>,
1288                                          <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1289                                 pinctrl-names = "default";
1290                                 pinctrl-0 = <&hub_i2c8_data_clk>;
1291                                 interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
1292                                 #address-cells = <1>;
1293                                 #size-cells = <0>;
1294                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1295                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1296                                 interconnect-names = "qup-core", "qup-config";
1297                                 status = "disabled";
1298                         };
1299 
1300                         i2c_hub_9: i2c@9a4000 {
1301                                 compatible = "qcom,geni-i2c-master-hub";
1302                                 reg = <0 0x009a4000 0 0x4000>;
1303                                 clock-names = "se", "core";
1304                                 clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>,
1305                                          <&gcc GCC_QUPV3_I2C_CORE_CLK>;
1306                                 pinctrl-names = "default";
1307                                 pinctrl-0 = <&hub_i2c9_data_clk>;
1308                                 interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
1309                                 #address-cells = <1>;
1310                                 #size-cells = <0>;
1311                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1312                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
1313                                 interconnect-names = "qup-core", "qup-config";
1314                                 status = "disabled";
1315                         };
1316                 };
1317 
1318                 gpi_dma1: dma-controller@a00000 {
1319                         compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
1320                         #dma-cells = <3>;
1321                         reg = <0 0x00a00000 0 0x60000>;
1322                         interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
1323                                      <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
1324                                      <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
1325                                      <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
1326                                      <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
1327                                      <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
1328                                      <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
1329                                      <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
1330                                      <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
1331                                      <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
1332                                      <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
1333                                      <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
1334                         dma-channels = <12>;
1335                         dma-channel-mask = <0x1e>;
1336                         iommus = <&apps_smmu 0xb6 0>;
1337                         dma-coherent;
1338                         status = "disabled";
1339                 };
1340 
1341                 qupv3_id_0: geniqup@ac0000 {
1342                         compatible = "qcom,geni-se-qup";
1343                         reg = <0 0x00ac0000 0 0x2000>;
1344                         ranges;
1345                         clock-names = "m-ahb", "s-ahb";
1346                         clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
1347                                  <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
1348                         iommus = <&apps_smmu 0xa3 0>;
1349                         interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>;
1350                         interconnect-names = "qup-core";
1351                         dma-coherent;
1352                         #address-cells = <2>;
1353                         #size-cells = <2>;
1354                         status = "disabled";
1355 
1356                         i2c0: i2c@a80000 {
1357                                 compatible = "qcom,geni-i2c";
1358                                 reg = <0 0x00a80000 0 0x4000>;
1359                                 clock-names = "se";
1360                                 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1361                                 pinctrl-names = "default";
1362                                 pinctrl-0 = <&qup_i2c0_data_clk>;
1363                                 interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1364                                 #address-cells = <1>;
1365                                 #size-cells = <0>;
1366                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1367                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1368                                                 <&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1369                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1370                                 dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
1371                                        <&gpi_dma1 1 0 QCOM_GPI_I2C>;
1372                                 dma-names = "tx", "rx";
1373                                 status = "disabled";
1374                         };
1375 
1376                         spi0: spi@a80000 {
1377                                 compatible = "qcom,geni-spi";
1378                                 reg = <0 0x00a80000 0 0x4000>;
1379                                 clock-names = "se";
1380                                 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1381                                 interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1382                                 pinctrl-names = "default";
1383                                 pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
1384                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1385                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1386                                                 <&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1387                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1388                                 dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
1389                                        <&gpi_dma1 1 0 QCOM_GPI_SPI>;
1390                                 dma-names = "tx", "rx";
1391                                 #address-cells = <1>;
1392                                 #size-cells = <0>;
1393                                 status = "disabled";
1394                         };
1395 
1396                         i2c1: i2c@a84000 {
1397                                 compatible = "qcom,geni-i2c";
1398                                 reg = <0 0x00a84000 0 0x4000>;
1399                                 clock-names = "se";
1400                                 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1401                                 pinctrl-names = "default";
1402                                 pinctrl-0 = <&qup_i2c1_data_clk>;
1403                                 interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1404                                 #address-cells = <1>;
1405                                 #size-cells = <0>;
1406                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1407                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1408                                                 <&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1409                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1410                                 dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
1411                                        <&gpi_dma1 1 1 QCOM_GPI_I2C>;
1412                                 dma-names = "tx", "rx";
1413                                 status = "disabled";
1414                         };
1415 
1416                         spi1: spi@a84000 {
1417                                 compatible = "qcom,geni-spi";
1418                                 reg = <0 0x00a84000 0 0x4000>;
1419                                 clock-names = "se";
1420                                 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1421                                 interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1422                                 pinctrl-names = "default";
1423                                 pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
1424                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1425                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1426                                                 <&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1427                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1428                                 dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
1429                                        <&gpi_dma1 1 1 QCOM_GPI_SPI>;
1430                                 dma-names = "tx", "rx";
1431                                 #address-cells = <1>;
1432                                 #size-cells = <0>;
1433                                 status = "disabled";
1434                         };
1435 
1436                         i2c2: i2c@a88000 {
1437                                 compatible = "qcom,geni-i2c";
1438                                 reg = <0 0x00a88000 0 0x4000>;
1439                                 clock-names = "se";
1440                                 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1441                                 pinctrl-names = "default";
1442                                 pinctrl-0 = <&qup_i2c2_data_clk>;
1443                                 interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1444                                 #address-cells = <1>;
1445                                 #size-cells = <0>;
1446                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1447                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1448                                                 <&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1449                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1450                                 dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
1451                                        <&gpi_dma1 1 2 QCOM_GPI_I2C>;
1452                                 dma-names = "tx", "rx";
1453                                 status = "disabled";
1454                         };
1455 
1456                         spi2: spi@a88000 {
1457                                 compatible = "qcom,geni-spi";
1458                                 reg = <0 0x00a88000 0 0x4000>;
1459                                 clock-names = "se";
1460                                 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1461                                 interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1462                                 pinctrl-names = "default";
1463                                 pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
1464                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1465                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1466                                                 <&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1467                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1468                                 dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
1469                                        <&gpi_dma1 1 2 QCOM_GPI_SPI>;
1470                                 dma-names = "tx", "rx";
1471                                 #address-cells = <1>;
1472                                 #size-cells = <0>;
1473                                 status = "disabled";
1474                         };
1475 
1476                         i2c3: i2c@a8c000 {
1477                                 compatible = "qcom,geni-i2c";
1478                                 reg = <0 0x00a8c000 0 0x4000>;
1479                                 clock-names = "se";
1480                                 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1481                                 pinctrl-names = "default";
1482                                 pinctrl-0 = <&qup_i2c3_data_clk>;
1483                                 interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1484                                 #address-cells = <1>;
1485                                 #size-cells = <0>;
1486                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1487                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1488                                                 <&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1489                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1490                                 dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
1491                                        <&gpi_dma1 1 3 QCOM_GPI_I2C>;
1492                                 dma-names = "tx", "rx";
1493                                 status = "disabled";
1494                         };
1495 
1496                         spi3: spi@a8c000 {
1497                                 compatible = "qcom,geni-spi";
1498                                 reg = <0 0x00a8c000 0 0x4000>;
1499                                 clock-names = "se";
1500                                 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1501                                 interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1502                                 pinctrl-names = "default";
1503                                 pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
1504                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1505                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1506                                                 <&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1507                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1508                                 dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
1509                                        <&gpi_dma1 1 3 QCOM_GPI_SPI>;
1510                                 dma-names = "tx", "rx";
1511                                 #address-cells = <1>;
1512                                 #size-cells = <0>;
1513                                 status = "disabled";
1514                         };
1515 
1516                         i2c4: i2c@a90000 {
1517                                 compatible = "qcom,geni-i2c";
1518                                 reg = <0 0x00a90000 0 0x4000>;
1519                                 clock-names = "se";
1520                                 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1521                                 pinctrl-names = "default";
1522                                 pinctrl-0 = <&qup_i2c4_data_clk>;
1523                                 interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1524                                 #address-cells = <1>;
1525                                 #size-cells = <0>;
1526                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1527                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1528                                                 <&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1529                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1530                                 dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
1531                                        <&gpi_dma1 1 4 QCOM_GPI_I2C>;
1532                                 dma-names = "tx", "rx";
1533                                 status = "disabled";
1534                         };
1535 
1536                         spi4: spi@a90000 {
1537                                 compatible = "qcom,geni-spi";
1538                                 reg = <0 0x00a90000 0 0x4000>;
1539                                 clock-names = "se";
1540                                 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1541                                 interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1542                                 pinctrl-names = "default";
1543                                 pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
1544                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1545                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1546                                                 <&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1547                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1548                                 dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
1549                                        <&gpi_dma1 1 4 QCOM_GPI_SPI>;
1550                                 dma-names = "tx", "rx";
1551                                 #address-cells = <1>;
1552                                 #size-cells = <0>;
1553                                 status = "disabled";
1554                         };
1555 
1556                         i2c5: i2c@a94000 {
1557                                 compatible = "qcom,geni-i2c";
1558                                 reg = <0 0x00a94000 0 0x4000>;
1559                                 clock-names = "se";
1560                                 clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1561                                 pinctrl-names = "default";
1562                                 pinctrl-0 = <&qup_i2c5_data_clk>;
1563                                 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1564                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1565                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1566                                                 <&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1567                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1568                                 dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
1569                                        <&gpi_dma1 1 5 QCOM_GPI_I2C>;
1570                                 dma-names = "tx", "rx";
1571                                 #address-cells = <1>;
1572                                 #size-cells = <0>;
1573                                 status = "disabled";
1574                         };
1575 
1576                         spi5: spi@a94000 {
1577                                 compatible = "qcom,geni-spi";
1578                                 reg = <0 0x00a94000 0 0x4000>;
1579                                 clock-names = "se";
1580                                 clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1581                                 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1582                                 pinctrl-names = "default";
1583                                 pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
1584                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1585                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1586                                                 <&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1587                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1588                                 dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
1589                                        <&gpi_dma1 1 5 QCOM_GPI_SPI>;
1590                                 dma-names = "tx", "rx";
1591                                 #address-cells = <1>;
1592                                 #size-cells = <0>;
1593                                 status = "disabled";
1594                         };
1595 
1596                         i2c6: i2c@a98000 {
1597                                 compatible = "qcom,geni-i2c";
1598                                 reg = <0 0x00a98000 0 0x4000>;
1599                                 clock-names = "se";
1600                                 clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
1601                                 pinctrl-names = "default";
1602                                 pinctrl-0 = <&qup_i2c6_data_clk>;
1603                                 interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
1604                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1605                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1606                                                 <&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1607                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1608                                 dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
1609                                        <&gpi_dma1 1 6 QCOM_GPI_I2C>;
1610                                 dma-names = "tx", "rx";
1611                                 #address-cells = <1>;
1612                                 #size-cells = <0>;
1613                                 status = "disabled";
1614                         };
1615 
1616                         spi6: spi@a98000 {
1617                                 compatible = "qcom,geni-spi";
1618                                 reg = <0 0x00a98000 0 0x4000>;
1619                                 clock-names = "se";
1620                                 clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
1621                                 interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
1622                                 pinctrl-names = "default";
1623                                 pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
1624                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1625                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
1626                                                 <&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
1627                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1628                                 dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
1629                                        <&gpi_dma1 1 6 QCOM_GPI_SPI>;
1630                                 dma-names = "tx", "rx";
1631                                 #address-cells = <1>;
1632                                 #size-cells = <0>;
1633                                 status = "disabled";
1634                         };
1635 
1636                         uart7: serial@a9c000 {
1637                                 compatible = "qcom,geni-debug-uart";
1638                                 reg = <0 0x00a9c000 0 0x4000>;
1639                                 clock-names = "se";
1640                                 clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
1641                                 pinctrl-names = "default";
1642                                 pinctrl-0 = <&qup_uart7_default>;
1643                                 interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
1644                                 interconnect-names = "qup-core", "qup-config";
1645                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1646                                                 <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
1647                                 status = "disabled";
1648                         };
1649                 };
1650 
1651                 cnoc_main: interconnect@1500000 {
1652                         compatible = "qcom,sm8550-cnoc-main";
1653                         reg = <0 0x01500000 0 0x13080>;
1654                         #interconnect-cells = <2>;
1655                         qcom,bcm-voters = <&apps_bcm_voter>;
1656                 };
1657 
1658                 config_noc: interconnect@1600000 {
1659                         compatible = "qcom,sm8550-config-noc";
1660                         reg = <0 0x01600000 0 0x6200>;
1661                         #interconnect-cells = <2>;
1662                         qcom,bcm-voters = <&apps_bcm_voter>;
1663                 };
1664 
1665                 system_noc: interconnect@1680000 {
1666                         compatible = "qcom,sm8550-system-noc";
1667                         reg = <0 0x01680000 0 0x1d080>;
1668                         #interconnect-cells = <2>;
1669                         qcom,bcm-voters = <&apps_bcm_voter>;
1670                 };
1671 
1672                 pcie_noc: interconnect@16c0000 {
1673                         compatible = "qcom,sm8550-pcie-anoc";
1674                         reg = <0 0x016c0000 0 0x12200>;
1675                         #interconnect-cells = <2>;
1676                         clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
1677                                  <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>;
1678                         qcom,bcm-voters = <&apps_bcm_voter>;
1679                 };
1680 
1681                 aggre1_noc: interconnect@16e0000 {
1682                         compatible = "qcom,sm8550-aggre1-noc";
1683                         reg = <0 0x016e0000 0 0x14400>;
1684                         #interconnect-cells = <2>;
1685                         clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
1686                                  <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
1687                         qcom,bcm-voters = <&apps_bcm_voter>;
1688                 };
1689 
1690                 aggre2_noc: interconnect@1700000 {
1691                         compatible = "qcom,sm8550-aggre2-noc";
1692                         reg = <0 0x01700000 0 0x1e400>;
1693                         #interconnect-cells = <2>;
1694                         clocks = <&rpmhcc RPMH_IPA_CLK>;
1695                         qcom,bcm-voters = <&apps_bcm_voter>;
1696                 };
1697 
1698                 mmss_noc: interconnect@1780000 {
1699                         compatible = "qcom,sm8550-mmss-noc";
1700                         reg = <0 0x01780000 0 0x5b800>;
1701                         #interconnect-cells = <2>;
1702                         qcom,bcm-voters = <&apps_bcm_voter>;
1703                 };
1704 
1705                 rng: rng@10c3000 {
1706                         compatible = "qcom,sm8550-trng", "qcom,trng";
1707                         reg = <0 0x010c3000 0 0x1000>;
1708                 };
1709 
1710                 pcie0: pcie@1c00000 {
1711                         device_type = "pci";
1712                         compatible = "qcom,pcie-sm8550";
1713                         reg = <0 0x01c00000 0 0x3000>,
1714                               <0 0x60000000 0 0xf1d>,
1715                               <0 0x60000f20 0 0xa8>,
1716                               <0 0x60001000 0 0x1000>,
1717                               <0 0x60100000 0 0x100000>;
1718                         reg-names = "parf", "dbi", "elbi", "atu", "config";
1719                         #address-cells = <3>;
1720                         #size-cells = <2>;
1721                         ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
1722                                  <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
1723                         bus-range = <0x00 0xff>;
1724 
1725                         dma-coherent;
1726 
1727                         linux,pci-domain = <0>;
1728                         num-lanes = <2>;
1729 
1730                         interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
1731                                      <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
1732                                      <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
1733                                      <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
1734                                      <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
1735                                      <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
1736                                      <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
1737                                      <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
1738                         interrupt-names = "msi0",
1739                                           "msi1",
1740                                           "msi2",
1741                                           "msi3",
1742                                           "msi4",
1743                                           "msi5",
1744                                           "msi6",
1745                                           "msi7";
1746                         #interrupt-cells = <1>;
1747                         interrupt-map-mask = <0 0 0 0x7>;
1748                         interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1749                                         <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1750                                         <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1751                                         <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1752 
1753                         clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
1754                                  <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
1755                                  <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
1756                                  <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
1757                                  <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
1758                                  <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
1759                                  <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>;
1760                         clock-names = "aux",
1761                                       "cfg",
1762                                       "bus_master",
1763                                       "bus_slave",
1764                                       "slave_q2a",
1765                                       "ddrss_sf_tbu",
1766                                       "noc_aggr";
1767 
1768                         interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
1769                                         <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>;
1770                         interconnect-names = "pcie-mem", "cpu-pcie";
1771 
1772                         msi-map = <0x0 &gic_its 0x1400 0x1>,
1773                                   <0x100 &gic_its 0x1401 0x1>;
1774                         iommu-map = <0x0   &apps_smmu 0x1400 0x1>,
1775                                     <0x100 &apps_smmu 0x1401 0x1>;
1776 
1777                         resets = <&gcc GCC_PCIE_0_BCR>;
1778                         reset-names = "pci";
1779 
1780                         power-domains = <&gcc PCIE_0_GDSC>;
1781 
1782                         phys = <&pcie0_phy>;
1783                         phy-names = "pciephy";
1784 
1785                         status = "disabled";
1786 
1787                         pcieport0: pcie@0 {
1788                                 device_type = "pci";
1789                                 reg = <0x0 0x0 0x0 0x0 0x0>;
1790                                 bus-range = <0x01 0xff>;
1791 
1792                                 #address-cells = <3>;
1793                                 #size-cells = <2>;
1794                                 ranges;
1795                         };
1796                 };
1797 
1798                 pcie0_phy: phy@1c06000 {
1799                         compatible = "qcom,sm8550-qmp-gen3x2-pcie-phy";
1800                         reg = <0 0x01c06000 0 0x2000>;
1801 
1802                         clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
1803                                  <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
1804                                  <&tcsr TCSR_PCIE_0_CLKREF_EN>,
1805                                  <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
1806                                  <&gcc GCC_PCIE_0_PIPE_CLK>;
1807                         clock-names = "aux", "cfg_ahb", "ref", "rchng",
1808                                       "pipe";
1809 
1810                         resets = <&gcc GCC_PCIE_0_PHY_BCR>;
1811                         reset-names = "phy";
1812 
1813                         assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
1814                         assigned-clock-rates = <100000000>;
1815 
1816                         power-domains = <&gcc PCIE_0_PHY_GDSC>;
1817 
1818                         #clock-cells = <0>;
1819                         clock-output-names = "pcie0_pipe_clk";
1820 
1821                         #phy-cells = <0>;
1822 
1823                         status = "disabled";
1824                 };
1825 
1826                 pcie1: pcie@1c08000 {
1827                         device_type = "pci";
1828                         compatible = "qcom,pcie-sm8550";
1829                         reg = <0x0 0x01c08000 0x0 0x3000>,
1830                               <0x0 0x40000000 0x0 0xf1d>,
1831                               <0x0 0x40000f20 0x0 0xa8>,
1832                               <0x0 0x40001000 0x0 0x1000>,
1833                               <0x0 0x40100000 0x0 0x100000>;
1834                         reg-names = "parf", "dbi", "elbi", "atu", "config";
1835                         #address-cells = <3>;
1836                         #size-cells = <2>;
1837                         ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
1838                                  <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
1839                         bus-range = <0x00 0xff>;
1840 
1841                         dma-coherent;
1842 
1843                         linux,pci-domain = <1>;
1844                         num-lanes = <2>;
1845 
1846                         interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
1847                                      <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
1848                                      <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
1849                                      <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
1850                                      <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
1851                                      <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
1852                                      <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
1853                                      <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
1854                         interrupt-names = "msi0",
1855                                           "msi1",
1856                                           "msi2",
1857                                           "msi3",
1858                                           "msi4",
1859                                           "msi5",
1860                                           "msi6",
1861                                           "msi7";
1862                         #interrupt-cells = <1>;
1863                         interrupt-map-mask = <0 0 0 0x7>;
1864                         interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1865                                         <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1866                                         <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1867                                         <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1868 
1869                         clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
1870                                  <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
1871                                  <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
1872                                  <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
1873                                  <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
1874                                  <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
1875                                  <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
1876                                  <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
1877                         clock-names = "aux",
1878                                       "cfg",
1879                                       "bus_master",
1880                                       "bus_slave",
1881                                       "slave_q2a",
1882                                       "ddrss_sf_tbu",
1883                                       "noc_aggr",
1884                                       "cnoc_sf_axi";
1885 
1886                         assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
1887                         assigned-clock-rates = <19200000>;
1888 
1889                         interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>,
1890                                         <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_1 0>;
1891                         interconnect-names = "pcie-mem", "cpu-pcie";
1892 
1893                         msi-map = <0x0 &gic_its 0x1480 0x1>,
1894                                   <0x100 &gic_its 0x1481 0x1>;
1895                         iommu-map = <0x0   &apps_smmu 0x1480 0x1>,
1896                                     <0x100 &apps_smmu 0x1481 0x1>;
1897 
1898                         resets = <&gcc GCC_PCIE_1_BCR>,
1899                                 <&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
1900                         reset-names = "pci", "link_down";
1901 
1902                         power-domains = <&gcc PCIE_1_GDSC>;
1903 
1904                         phys = <&pcie1_phy>;
1905                         phy-names = "pciephy";
1906 
1907                         status = "disabled";
1908 
1909                         pcie@0 {
1910                                 device_type = "pci";
1911                                 reg = <0x0 0x0 0x0 0x0 0x0>;
1912                                 bus-range = <0x01 0xff>;
1913 
1914                                 #address-cells = <3>;
1915                                 #size-cells = <2>;
1916                                 ranges;
1917                         };
1918                 };
1919 
1920                 pcie1_phy: phy@1c0e000 {
1921                         compatible = "qcom,sm8550-qmp-gen4x2-pcie-phy";
1922                         reg = <0x0 0x01c0e000 0x0 0x2000>;
1923 
1924                         clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
1925                                  <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
1926                                  <&tcsr TCSR_PCIE_1_CLKREF_EN>,
1927                                  <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
1928                                  <&gcc GCC_PCIE_1_PIPE_CLK>;
1929                         clock-names = "aux", "cfg_ahb", "ref", "rchng",
1930                                       "pipe";
1931 
1932                         resets = <&gcc GCC_PCIE_1_PHY_BCR>,
1933                                  <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>;
1934                         reset-names = "phy", "phy_nocsr";
1935 
1936                         assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
1937                         assigned-clock-rates = <100000000>;
1938 
1939                         power-domains = <&gcc PCIE_1_PHY_GDSC>;
1940 
1941                         #clock-cells = <1>;
1942                         clock-output-names = "pcie1_pipe_clk";
1943 
1944                         #phy-cells = <0>;
1945 
1946                         status = "disabled";
1947                 };
1948 
1949                 cryptobam: dma-controller@1dc4000 {
1950                         compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
1951                         reg = <0x0 0x01dc4000 0x0 0x28000>;
1952                         interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
1953                         #dma-cells = <1>;
1954                         qcom,ee = <0>;
1955                         qcom,controlled-remotely;
1956                         iommus = <&apps_smmu 0x480 0x0>,
1957                                  <&apps_smmu 0x481 0x0>;
1958                 };
1959 
1960                 crypto: crypto@1dfa000 {
1961                         compatible = "qcom,sm8550-qce", "qcom,sm8150-qce", "qcom,qce";
1962                         reg = <0x0 0x01dfa000 0x0 0x6000>;
1963                         dmas = <&cryptobam 4>, <&cryptobam 5>;
1964                         dma-names = "rx", "tx";
1965                         iommus = <&apps_smmu 0x480 0x0>,
1966                                  <&apps_smmu 0x481 0x0>;
1967                         interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
1968                         interconnect-names = "memory";
1969                 };
1970 
1971                 ufs_mem_phy: phy@1d80000 {
1972                         compatible = "qcom,sm8550-qmp-ufs-phy";
1973                         reg = <0x0 0x01d80000 0x0 0x2000>;
1974                         clocks = <&rpmhcc RPMH_CXO_CLK>,
1975                                  <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
1976                                  <&tcsr TCSR_UFS_CLKREF_EN>;
1977                         clock-names = "ref",
1978                                       "ref_aux",
1979                                       "qref";
1980 
1981                         power-domains = <&gcc UFS_MEM_PHY_GDSC>;
1982 
1983                         resets = <&ufs_mem_hc 0>;
1984                         reset-names = "ufsphy";
1985 
1986                         #clock-cells = <1>;
1987                         #phy-cells = <0>;
1988 
1989                         status = "disabled";
1990                 };
1991 
1992                 ufs_mem_hc: ufs@1d84000 {
1993                         compatible = "qcom,sm8550-ufshc", "qcom,ufshc",
1994                                      "jedec,ufs-2.0";
1995                         reg = <0x0 0x01d84000 0x0 0x3000>;
1996                         interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
1997                         phys = <&ufs_mem_phy>;
1998                         phy-names = "ufsphy";
1999                         lanes-per-direction = <2>;
2000                         #reset-cells = <1>;
2001                         resets = <&gcc GCC_UFS_PHY_BCR>;
2002                         reset-names = "rst";
2003 
2004                         power-domains = <&gcc UFS_PHY_GDSC>;
2005                         required-opps = <&rpmhpd_opp_nom>;
2006 
2007                         iommus = <&apps_smmu 0x60 0x0>;
2008                         dma-coherent;
2009 
2010                         operating-points-v2 = <&ufs_opp_table>;
2011                         interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
2012                                         <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
2013 
2014                         interconnect-names = "ufs-ddr", "cpu-ufs";
2015                         clock-names = "core_clk",
2016                                       "bus_aggr_clk",
2017                                       "iface_clk",
2018                                       "core_clk_unipro",
2019                                       "ref_clk",
2020                                       "tx_lane0_sync_clk",
2021                                       "rx_lane0_sync_clk",
2022                                       "rx_lane1_sync_clk";
2023                         clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
2024                                  <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
2025                                  <&gcc GCC_UFS_PHY_AHB_CLK>,
2026                                  <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
2027                                  <&tcsr TCSR_UFS_PAD_CLKREF_EN>,
2028                                  <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
2029                                  <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
2030                                  <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
2031                         qcom,ice = <&ice>;
2032 
2033                         status = "disabled";
2034 
2035                         ufs_opp_table: opp-table {
2036                                 compatible = "operating-points-v2";
2037 
2038                                 opp-75000000 {
2039                                         opp-hz = /bits/ 64 <75000000>,
2040                                                  /bits/ 64 <0>,
2041                                                  /bits/ 64 <0>,
2042                                                  /bits/ 64 <75000000>,
2043                                                  /bits/ 64 <0>,
2044                                                  /bits/ 64 <0>,
2045                                                  /bits/ 64 <0>,
2046                                                  /bits/ 64 <0>;
2047                                         required-opps = <&rpmhpd_opp_low_svs>;
2048                                 };
2049 
2050                                 opp-150000000 {
2051                                         opp-hz = /bits/ 64 <150000000>,
2052                                                  /bits/ 64 <0>,
2053                                                  /bits/ 64 <0>,
2054                                                  /bits/ 64 <150000000>,
2055                                                  /bits/ 64 <0>,
2056                                                  /bits/ 64 <0>,
2057                                                  /bits/ 64 <0>,
2058                                                  /bits/ 64 <0>;
2059                                         required-opps = <&rpmhpd_opp_svs>;
2060                                 };
2061 
2062                                 opp-300000000 {
2063                                         opp-hz = /bits/ 64 <300000000>,
2064                                                  /bits/ 64 <0>,
2065                                                  /bits/ 64 <0>,
2066                                                  /bits/ 64 <300000000>,
2067                                                  /bits/ 64 <0>,
2068                                                  /bits/ 64 <0>,
2069                                                  /bits/ 64 <0>,
2070                                                  /bits/ 64 <0>;
2071                                         required-opps = <&rpmhpd_opp_nom>;
2072                                 };
2073                         };
2074                 };
2075 
2076                 ice: crypto@1d88000 {
2077                         compatible = "qcom,sm8550-inline-crypto-engine",
2078                                      "qcom,inline-crypto-engine";
2079                         reg = <0 0x01d88000 0 0x8000>;
2080                         clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
2081                 };
2082 
2083                 tcsr_mutex: hwlock@1f40000 {
2084                         compatible = "qcom,tcsr-mutex";
2085                         reg = <0 0x01f40000 0 0x20000>;
2086                         #hwlock-cells = <1>;
2087                 };
2088 
2089                 tcsr: clock-controller@1fc0000 {
2090                         compatible = "qcom,sm8550-tcsr", "syscon";
2091                         reg = <0 0x01fc0000 0 0x30000>;
2092                         clocks = <&rpmhcc RPMH_CXO_CLK>;
2093                         #clock-cells = <1>;
2094                         #reset-cells = <1>;
2095                 };
2096 
2097                 gpu: gpu@3d00000 {
2098                         compatible = "qcom,adreno-43050a01", "qcom,adreno";
2099                         reg = <0x0 0x03d00000 0x0 0x40000>,
2100                               <0x0 0x03d9e000 0x0 0x1000>,
2101                               <0x0 0x03d61000 0x0 0x800>;
2102                         reg-names = "kgsl_3d0_reg_memory",
2103                                     "cx_mem",
2104                                     "cx_dbgc";
2105 
2106                         interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
2107 
2108                         iommus = <&adreno_smmu 0 0x0>,
2109                                  <&adreno_smmu 1 0x0>;
2110 
2111                         operating-points-v2 = <&gpu_opp_table>;
2112 
2113                         qcom,gmu = <&gmu>;
2114                         #cooling-cells = <2>;
2115 
2116                         status = "disabled";
2117 
2118                         zap-shader {
2119                                 memory-region = <&gpu_micro_code_mem>;
2120                         };
2121 
2122                         /* Speedbin needs more work on A740+, keep only lower freqs */
2123                         gpu_opp_table: opp-table {
2124                                 compatible = "operating-points-v2";
2125 
2126                                 opp-680000000 {
2127                                         opp-hz = /bits/ 64 <680000000>;
2128                                         opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
2129                                 };
2130 
2131                                 opp-615000000 {
2132                                         opp-hz = /bits/ 64 <615000000>;
2133                                         opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
2134                                 };
2135 
2136                                 opp-550000000 {
2137                                         opp-hz = /bits/ 64 <550000000>;
2138                                         opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
2139                                 };
2140 
2141                                 opp-475000000 {
2142                                         opp-hz = /bits/ 64 <475000000>;
2143                                         opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
2144                                 };
2145 
2146                                 opp-401000000 {
2147                                         opp-hz = /bits/ 64 <401000000>;
2148                                         opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
2149                                 };
2150 
2151                                 opp-348000000 {
2152                                         opp-hz = /bits/ 64 <348000000>;
2153                                         opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
2154                                 };
2155 
2156                                 opp-295000000 {
2157                                         opp-hz = /bits/ 64 <295000000>;
2158                                         opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
2159                                 };
2160 
2161                                 opp-220000000 {
2162                                         opp-hz = /bits/ 64 <220000000>;
2163                                         opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
2164                                 };
2165                         };
2166                 };
2167 
2168                 gmu: gmu@3d6a000 {
2169                         compatible = "qcom,adreno-gmu-740.1", "qcom,adreno-gmu";
2170                         reg = <0x0 0x03d6a000 0x0 0x35000>,
2171                               <0x0 0x03d50000 0x0 0x10000>,
2172                               <0x0 0x0b280000 0x0 0x10000>;
2173                         reg-names = "gmu", "rscc", "gmu_pdc";
2174 
2175                         interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
2176                                      <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
2177                         interrupt-names = "hfi", "gmu";
2178 
2179                         clocks = <&gpucc GPU_CC_AHB_CLK>,
2180                                  <&gpucc GPU_CC_CX_GMU_CLK>,
2181                                  <&gpucc GPU_CC_CXO_CLK>,
2182                                  <&gcc GCC_DDRSS_GPU_AXI_CLK>,
2183                                  <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
2184                                  <&gpucc GPU_CC_HUB_CX_INT_CLK>,
2185                                  <&gpucc GPU_CC_DEMET_CLK>;
2186                         clock-names = "ahb",
2187                                       "gmu",
2188                                       "cxo",
2189                                       "axi",
2190                                       "memnoc",
2191                                       "hub",
2192                                       "demet";
2193 
2194                         power-domains = <&gpucc GPU_CC_CX_GDSC>,
2195                                         <&gpucc GPU_CC_GX_GDSC>;
2196                         power-domain-names = "cx",
2197                                              "gx";
2198 
2199                         iommus = <&adreno_smmu 5 0x0>;
2200 
2201                         qcom,qmp = <&aoss_qmp>;
2202 
2203                         operating-points-v2 = <&gmu_opp_table>;
2204 
2205                         gmu_opp_table: opp-table {
2206                                 compatible = "operating-points-v2";
2207 
2208                                 opp-500000000 {
2209                                         opp-hz = /bits/ 64 <500000000>;
2210                                         opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
2211                                 };
2212 
2213                                 opp-200000000 {
2214                                         opp-hz = /bits/ 64 <200000000>;
2215                                         opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
2216                                 };
2217                         };
2218                 };
2219 
2220                 gpucc: clock-controller@3d90000 {
2221                         compatible = "qcom,sm8550-gpucc";
2222                         reg = <0 0x03d90000 0 0xa000>;
2223                         clocks = <&bi_tcxo_div2>,
2224                                  <&gcc GCC_GPU_GPLL0_CLK_SRC>,
2225                                  <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
2226                         #clock-cells = <1>;
2227                         #reset-cells = <1>;
2228                         #power-domain-cells = <1>;
2229                 };
2230 
2231                 adreno_smmu: iommu@3da0000 {
2232                         compatible = "qcom,sm8550-smmu-500", "qcom,adreno-smmu",
2233                                      "qcom,smmu-500", "arm,mmu-500";
2234                         reg = <0x0 0x03da0000 0x0 0x40000>;
2235                         #iommu-cells = <2>;
2236                         #global-interrupts = <1>;
2237                         interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
2238                                      <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH>,
2239                                      <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
2240                                      <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
2241                                      <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
2242                                      <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
2243                                      <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
2244                                      <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
2245                                      <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
2246                                      <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
2247                                      <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
2248                                      <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
2249                                      <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
2250                                      <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
2251                                      <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
2252                                      <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
2253                                      <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
2254                                      <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
2255                                      <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
2256                                      <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
2257                                      <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
2258                                      <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
2259                                      <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
2260                                      <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
2261                                      <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
2262                                      <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
2263                         clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
2264                                  <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
2265                                  <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
2266                                  <&gpucc GPU_CC_AHB_CLK>;
2267                         clock-names = "hlos",
2268                                       "bus",
2269                                       "iface",
2270                                       "ahb";
2271                         power-domains = <&gpucc GPU_CC_CX_GDSC>;
2272                         dma-coherent;
2273                 };
2274 
2275                 ipa: ipa@3f40000 {
2276                         compatible = "qcom,sm8550-ipa";
2277 
2278                         iommus = <&apps_smmu 0x4a0 0x0>,
2279                                  <&apps_smmu 0x4a2 0x0>;
2280                         reg = <0 0x3f40000 0 0x10000>,
2281                               <0 0x3f50000 0 0x5000>,
2282                               <0 0x3e04000 0 0xfc000>;
2283                         reg-names = "ipa-reg",
2284                                     "ipa-shared",
2285                                     "gsi";
2286 
2287                         interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>,
2288                                               <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
2289                                               <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
2290                                               <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
2291                         interrupt-names = "ipa",
2292                                           "gsi",
2293                                           "ipa-clock-query",
2294                                           "ipa-setup-ready";
2295 
2296                         clocks = <&rpmhcc RPMH_IPA_CLK>;
2297                         clock-names = "core";
2298 
2299                         interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
2300                                         <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
2301                         interconnect-names = "memory",
2302                                              "config";
2303 
2304                         qcom,qmp = <&aoss_qmp>;
2305 
2306                         qcom,smem-states = <&ipa_smp2p_out 0>,
2307                                            <&ipa_smp2p_out 1>;
2308                         qcom,smem-state-names = "ipa-clock-enabled-valid",
2309                                                 "ipa-clock-enabled";
2310 
2311                         status = "disabled";
2312                 };
2313 
2314                 remoteproc_mpss: remoteproc@4080000 {
2315                         compatible = "qcom,sm8550-mpss-pas";
2316                         reg = <0x0 0x04080000 0x0 0x4040>;
2317 
2318                         interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
2319                                               <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
2320                                               <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
2321                                               <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
2322                                               <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
2323                                               <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
2324                         interrupt-names = "wdog", "fatal", "ready", "handover",
2325                                           "stop-ack", "shutdown-ack";
2326 
2327                         clocks = <&rpmhcc RPMH_CXO_CLK>;
2328                         clock-names = "xo";
2329 
2330                         power-domains = <&rpmhpd RPMHPD_CX>,
2331                                         <&rpmhpd RPMHPD_MSS>;
2332                         power-domain-names = "cx", "mss";
2333 
2334                         interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
2335 
2336                         memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>, <&mpss_dsm_mem>;
2337 
2338                         qcom,qmp = <&aoss_qmp>;
2339 
2340                         qcom,smem-states = <&smp2p_modem_out 0>;
2341                         qcom,smem-state-names = "stop";
2342 
2343                         status = "disabled";
2344 
2345                         glink-edge {
2346                                 interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
2347                                                              IPCC_MPROC_SIGNAL_GLINK_QMP
2348                                                              IRQ_TYPE_EDGE_RISING>;
2349                                 mboxes = <&ipcc IPCC_CLIENT_MPSS
2350                                                 IPCC_MPROC_SIGNAL_GLINK_QMP>;
2351                                 label = "mpss";
2352                                 qcom,remote-pid = <1>;
2353                         };
2354                 };
2355 
2356                 lpass_wsa2macro: codec@6aa0000 {
2357                         compatible = "qcom,sm8550-lpass-wsa-macro";
2358                         reg = <0 0x06aa0000 0 0x1000>;
2359                         clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2360                                  <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2361                                  <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2362                                  <&lpass_vamacro>;
2363                         clock-names = "mclk", "macro", "dcodec", "fsgen";
2364 
2365                         #clock-cells = <0>;
2366                         clock-output-names = "wsa2-mclk";
2367                         #sound-dai-cells = <1>;
2368                 };
2369 
2370                 swr3: soundwire@6ab0000 {
2371                         compatible = "qcom,soundwire-v2.0.0";
2372                         reg = <0 0x06ab0000 0 0x10000>;
2373                         interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
2374                         clocks = <&lpass_wsa2macro>;
2375                         clock-names = "iface";
2376                         label = "WSA2";
2377 
2378                         pinctrl-0 = <&wsa2_swr_active>;
2379                         pinctrl-names = "default";
2380 
2381                         qcom,din-ports = <4>;
2382                         qcom,dout-ports = <9>;
2383 
2384                         qcom,ports-sinterval =          /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
2385                         qcom,ports-offset1 =            /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
2386                         qcom,ports-offset2 =            /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2387                         qcom,ports-hstart =             /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
2388                         qcom,ports-hstop =              /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
2389                         qcom,ports-word-length =        /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
2390                         qcom,ports-block-pack-mode =    /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
2391                         qcom,ports-block-group-count =  /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2392                         qcom,ports-lane-control =       /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2393 
2394                         #address-cells = <2>;
2395                         #size-cells = <0>;
2396                         #sound-dai-cells = <1>;
2397                         status = "disabled";
2398                 };
2399 
2400                 lpass_rxmacro: codec@6ac0000 {
2401                         compatible = "qcom,sm8550-lpass-rx-macro";
2402                         reg = <0 0x06ac0000 0 0x1000>;
2403                         clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2404                                  <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2405                                  <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2406                                  <&lpass_vamacro>;
2407                         clock-names = "mclk", "macro", "dcodec", "fsgen";
2408 
2409                         #clock-cells = <0>;
2410                         clock-output-names = "mclk";
2411                         #sound-dai-cells = <1>;
2412                 };
2413 
2414                 swr1: soundwire@6ad0000 {
2415                         compatible = "qcom,soundwire-v2.0.0";
2416                         reg = <0 0x06ad0000 0 0x10000>;
2417                         interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
2418                         clocks = <&lpass_rxmacro>;
2419                         clock-names = "iface";
2420                         label = "RX";
2421 
2422                         pinctrl-0 = <&rx_swr_active>;
2423                         pinctrl-names = "default";
2424 
2425                         qcom,din-ports = <1>;
2426                         qcom,dout-ports = <11>;
2427 
2428                         qcom,ports-sinterval =          /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff 0xff 0xff>;
2429                         qcom,ports-offset1 =            /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
2430                         qcom,ports-offset2 =            /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
2431                         qcom,ports-hstart =             /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>;
2432                         qcom,ports-hstop =              /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>;
2433                         qcom,ports-word-length =        /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff 0xff 0xff>;
2434                         qcom,ports-block-pack-mode =    /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
2435                         qcom,ports-block-group-count =  /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
2436                         qcom,ports-lane-control =       /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
2437 
2438                         #address-cells = <2>;
2439                         #size-cells = <0>;
2440                         #sound-dai-cells = <1>;
2441                         status = "disabled";
2442                 };
2443 
2444                 lpass_txmacro: codec@6ae0000 {
2445                         compatible = "qcom,sm8550-lpass-tx-macro";
2446                         reg = <0 0x06ae0000 0 0x1000>;
2447                         clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2448                                  <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2449                                  <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2450                                  <&lpass_vamacro>;
2451                         clock-names = "mclk", "macro", "dcodec", "fsgen";
2452 
2453                         #clock-cells = <0>;
2454                         clock-output-names = "mclk";
2455                         #sound-dai-cells = <1>;
2456                 };
2457 
2458                 lpass_wsamacro: codec@6b00000 {
2459                         compatible = "qcom,sm8550-lpass-wsa-macro";
2460                         reg = <0 0x06b00000 0 0x1000>;
2461                         clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2462                                  <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2463                                  <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2464                                  <&lpass_vamacro>;
2465                         clock-names = "mclk", "macro", "dcodec", "fsgen";
2466 
2467                         #clock-cells = <0>;
2468                         clock-output-names = "mclk";
2469                         #sound-dai-cells = <1>;
2470                 };
2471 
2472                 swr0: soundwire@6b10000 {
2473                         compatible = "qcom,soundwire-v2.0.0";
2474                         reg = <0 0x06b10000 0 0x10000>;
2475                         interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
2476                         clocks = <&lpass_wsamacro>;
2477                         clock-names = "iface";
2478                         label = "WSA";
2479 
2480                         pinctrl-0 = <&wsa_swr_active>;
2481                         pinctrl-names = "default";
2482 
2483                         qcom,din-ports = <4>;
2484                         qcom,dout-ports = <9>;
2485 
2486                         qcom,ports-sinterval =          /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
2487                         qcom,ports-offset1 =            /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
2488                         qcom,ports-offset2 =            /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2489                         qcom,ports-hstart =             /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
2490                         qcom,ports-hstop =              /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
2491                         qcom,ports-word-length =        /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
2492                         qcom,ports-block-pack-mode =    /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
2493                         qcom,ports-block-group-count =  /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2494                         qcom,ports-lane-control =       /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2495 
2496                         #address-cells = <2>;
2497                         #size-cells = <0>;
2498                         #sound-dai-cells = <1>;
2499                         status = "disabled";
2500                 };
2501 
2502                 swr2: soundwire@6d30000 {
2503                         compatible = "qcom,soundwire-v2.0.0";
2504                         reg = <0 0x06d30000 0 0x10000>;
2505                         interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
2506                                      <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
2507                         interrupt-names = "core", "wakeup";
2508                         clocks = <&lpass_txmacro>;
2509                         clock-names = "iface";
2510                         label = "TX";
2511 
2512                         pinctrl-0 = <&tx_swr_active>;
2513                         pinctrl-names = "default";
2514 
2515                         qcom,din-ports = <4>;
2516                         qcom,dout-ports = <0>;
2517                         qcom,ports-sinterval-low =      /bits/ 8 <0x01 0x01 0x03 0x03>;
2518                         qcom,ports-offset1 =            /bits/ 8 <0x00 0x00 0x01 0x01>;
2519                         qcom,ports-offset2 =            /bits/ 8 <0x00 0x00 0x00 0x00>;
2520                         qcom,ports-hstart =             /bits/ 8 <0xff 0xff 0xff 0xff>;
2521                         qcom,ports-hstop =              /bits/ 8 <0xff 0xff 0xff 0xff>;
2522                         qcom,ports-word-length =        /bits/ 8 <0xff 0xff 0xff 0xff>;
2523                         qcom,ports-block-pack-mode =    /bits/ 8 <0xff 0xff 0xff 0xff>;
2524                         qcom,ports-block-group-count =  /bits/ 8 <0xff 0xff 0xff 0xff>;
2525                         qcom,ports-lane-control =       /bits/ 8 <0x01 0x02 0x00 0x00>;
2526 
2527                         #address-cells = <2>;
2528                         #size-cells = <0>;
2529                         #sound-dai-cells = <1>;
2530                         status = "disabled";
2531                 };
2532 
2533                 lpass_vamacro: codec@6d44000 {
2534                         compatible = "qcom,sm8550-lpass-va-macro";
2535                         reg = <0 0x06d44000 0 0x1000>;
2536                         clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2537                                  <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2538                                  <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2539                         clock-names = "mclk", "macro", "dcodec";
2540 
2541                         #clock-cells = <0>;
2542                         clock-output-names = "fsgen";
2543                         #sound-dai-cells = <1>;
2544                 };
2545 
2546                 lpass_tlmm: pinctrl@6e80000 {
2547                         compatible = "qcom,sm8550-lpass-lpi-pinctrl";
2548                         reg = <0 0x06e80000 0 0x20000>,
2549                               <0 0x07250000 0 0x10000>;
2550                         gpio-controller;
2551                         #gpio-cells = <2>;
2552                         gpio-ranges = <&lpass_tlmm 0 0 23>;
2553 
2554                         clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2555                                  <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2556                         clock-names = "core", "audio";
2557 
2558                         tx_swr_active: tx-swr-active-state {
2559                                 clk-pins {
2560                                         pins = "gpio0";
2561                                         function = "swr_tx_clk";
2562                                         drive-strength = <2>;
2563                                         slew-rate = <1>;
2564                                         bias-disable;
2565                                 };
2566 
2567                                 data-pins {
2568                                         pins = "gpio1", "gpio2", "gpio14";
2569                                         function = "swr_tx_data";
2570                                         drive-strength = <2>;
2571                                         slew-rate = <1>;
2572                                         bias-bus-hold;
2573                                 };
2574                         };
2575 
2576                         rx_swr_active: rx-swr-active-state {
2577                                 clk-pins {
2578                                         pins = "gpio3";
2579                                         function = "swr_rx_clk";
2580                                         drive-strength = <2>;
2581                                         slew-rate = <1>;
2582                                         bias-disable;
2583                                 };
2584 
2585                                 data-pins {
2586                                         pins = "gpio4", "gpio5";
2587                                         function = "swr_rx_data";
2588                                         drive-strength = <2>;
2589                                         slew-rate = <1>;
2590                                         bias-bus-hold;
2591                                 };
2592                         };
2593 
2594                         dmic01_default: dmic01-default-state {
2595                                 clk-pins {
2596                                         pins = "gpio6";
2597                                         function = "dmic1_clk";
2598                                         drive-strength = <8>;
2599                                         output-high;
2600                                 };
2601 
2602                                 data-pins {
2603                                         pins = "gpio7";
2604                                         function = "dmic1_data";
2605                                         drive-strength = <8>;
2606                                         input-enable;
2607                                 };
2608                         };
2609 
2610                         dmic23_default: dmic23-default-state {
2611                                 clk-pins {
2612                                         pins = "gpio8";
2613                                         function = "dmic2_clk";
2614                                         drive-strength = <8>;
2615                                         output-high;
2616                                 };
2617 
2618                                 data-pins {
2619                                         pins = "gpio9";
2620                                         function = "dmic2_data";
2621                                         drive-strength = <8>;
2622                                         input-enable;
2623                                 };
2624                         };
2625 
2626                         wsa_swr_active: wsa-swr-active-state {
2627                                 clk-pins {
2628                                         pins = "gpio10";
2629                                         function = "wsa_swr_clk";
2630                                         drive-strength = <2>;
2631                                         slew-rate = <1>;
2632                                         bias-disable;
2633                                 };
2634 
2635                                 data-pins {
2636                                         pins = "gpio11";
2637                                         function = "wsa_swr_data";
2638                                         drive-strength = <2>;
2639                                         slew-rate = <1>;
2640                                         bias-bus-hold;
2641                                 };
2642                         };
2643 
2644                         wsa2_swr_active: wsa2-swr-active-state {
2645                                 clk-pins {
2646                                         pins = "gpio15";
2647                                         function = "wsa2_swr_clk";
2648                                         drive-strength = <2>;
2649                                         slew-rate = <1>;
2650                                         bias-disable;
2651                                 };
2652 
2653                                 data-pins {
2654                                         pins = "gpio16";
2655                                         function = "wsa2_swr_data";
2656                                         drive-strength = <2>;
2657                                         slew-rate = <1>;
2658                                         bias-bus-hold;
2659                                 };
2660                         };
2661                 };
2662 
2663                 lpass_lpiaon_noc: interconnect@7400000 {
2664                         compatible = "qcom,sm8550-lpass-lpiaon-noc";
2665                         reg = <0 0x07400000 0 0x19080>;
2666                         #interconnect-cells = <2>;
2667                         qcom,bcm-voters = <&apps_bcm_voter>;
2668                 };
2669 
2670                 lpass_lpicx_noc: interconnect@7430000 {
2671                         compatible = "qcom,sm8550-lpass-lpicx-noc";
2672                         reg = <0 0x07430000 0 0x3a200>;
2673                         #interconnect-cells = <2>;
2674                         qcom,bcm-voters = <&apps_bcm_voter>;
2675                 };
2676 
2677                 lpass_ag_noc: interconnect@7e40000 {
2678                         compatible = "qcom,sm8550-lpass-ag-noc";
2679                         reg = <0 0x07e40000 0 0xe080>;
2680                         #interconnect-cells = <2>;
2681                         qcom,bcm-voters = <&apps_bcm_voter>;
2682                 };
2683 
2684                 sdhc_2: mmc@8804000 {
2685                         compatible = "qcom,sm8550-sdhci", "qcom,sdhci-msm-v5";
2686                         reg = <0 0x08804000 0 0x1000>;
2687 
2688                         interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
2689                                      <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
2690                         interrupt-names = "hc_irq", "pwr_irq";
2691 
2692                         clocks = <&gcc GCC_SDCC2_AHB_CLK>,
2693                                  <&gcc GCC_SDCC2_APPS_CLK>,
2694                                  <&rpmhcc RPMH_CXO_CLK>;
2695                         clock-names = "iface", "core", "xo";
2696                         iommus = <&apps_smmu 0x540 0>;
2697                         qcom,dll-config = <0x0007642c>;
2698                         qcom,ddr-config = <0x80040868>;
2699                         power-domains = <&rpmhpd RPMHPD_CX>;
2700                         operating-points-v2 = <&sdhc2_opp_table>;
2701 
2702                         interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
2703                                         <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
2704                         interconnect-names = "sdhc-ddr", "cpu-sdhc";
2705                         bus-width = <4>;
2706                         dma-coherent;
2707 
2708                         /* Forbid SDR104/SDR50 - broken hw! */
2709                         sdhci-caps-mask = <0x3 0>;
2710 
2711                         status = "disabled";
2712 
2713                         sdhc2_opp_table: opp-table {
2714                                 compatible = "operating-points-v2";
2715 
2716                                 opp-19200000 {
2717                                         opp-hz = /bits/ 64 <19200000>;
2718                                         required-opps = <&rpmhpd_opp_min_svs>;
2719                                 };
2720 
2721                                 opp-50000000 {
2722                                         opp-hz = /bits/ 64 <50000000>;
2723                                         required-opps = <&rpmhpd_opp_low_svs>;
2724                                 };
2725 
2726                                 opp-100000000 {
2727                                         opp-hz = /bits/ 64 <100000000>;
2728                                         required-opps = <&rpmhpd_opp_svs>;
2729                                 };
2730 
2731                                 opp-202000000 {
2732                                         opp-hz = /bits/ 64 <202000000>;
2733                                         required-opps = <&rpmhpd_opp_svs_l1>;
2734                                 };
2735                         };
2736                 };
2737 
2738                 videocc: clock-controller@aaf0000 {
2739                         compatible = "qcom,sm8550-videocc";
2740                         reg = <0 0x0aaf0000 0 0x10000>;
2741                         clocks = <&bi_tcxo_div2>,
2742                                  <&gcc GCC_VIDEO_AHB_CLK>;
2743                         power-domains = <&rpmhpd RPMHPD_MMCX>;
2744                         required-opps = <&rpmhpd_opp_low_svs>;
2745                         #clock-cells = <1>;
2746                         #reset-cells = <1>;
2747                         #power-domain-cells = <1>;
2748                 };
2749 
2750                 cci0: cci@ac15000 {
2751                         compatible = "qcom,sm8550-cci", "qcom,msm8996-cci";
2752                         reg = <0 0x0ac15000 0 0x1000>;
2753                         interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING>;
2754                         power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
2755                         clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
2756                                  <&camcc CAM_CC_CPAS_AHB_CLK>,
2757                                  <&camcc CAM_CC_CCI_0_CLK>;
2758                         clock-names = "camnoc_axi",
2759                                       "cpas_ahb",
2760                                       "cci";
2761                         pinctrl-0 = <&cci0_0_default &cci0_1_default>;
2762                         pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>;
2763                         pinctrl-names = "default", "sleep";
2764                         status = "disabled";
2765                         #address-cells = <1>;
2766                         #size-cells = <0>;
2767 
2768                         cci0_i2c0: i2c-bus@0 {
2769                                 reg = <0>;
2770                                 clock-frequency = <1000000>;
2771                                 #address-cells = <1>;
2772                                 #size-cells = <0>;
2773                         };
2774 
2775                         cci0_i2c1: i2c-bus@1 {
2776                                 reg = <1>;
2777                                 clock-frequency = <1000000>;
2778                                 #address-cells = <1>;
2779                                 #size-cells = <0>;
2780                         };
2781                 };
2782 
2783                 cci1: cci@ac16000 {
2784                         compatible = "qcom,sm8550-cci", "qcom,msm8996-cci";
2785                         reg = <0 0x0ac16000 0 0x1000>;
2786                         interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING>;
2787                         power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
2788                         clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
2789                                  <&camcc CAM_CC_CPAS_AHB_CLK>,
2790                                  <&camcc CAM_CC_CCI_1_CLK>;
2791                         clock-names = "camnoc_axi",
2792                                       "cpas_ahb",
2793                                       "cci";
2794                         pinctrl-0 = <&cci1_0_default>;
2795                         pinctrl-1 = <&cci1_0_sleep>;
2796                         pinctrl-names = "default", "sleep";
2797                         status = "disabled";
2798                         #address-cells = <1>;
2799                         #size-cells = <0>;
2800 
2801                         cci1_i2c0: i2c-bus@0 {
2802                                 reg = <0>;
2803                                 clock-frequency = <1000000>;
2804                                 #address-cells = <1>;
2805                                 #size-cells = <0>;
2806                         };
2807                 };
2808 
2809                 cci2: cci@ac17000 {
2810                         compatible = "qcom,sm8550-cci", "qcom,msm8996-cci";
2811                         reg = <0 0x0ac17000 0 0x1000>;
2812                         interrupts = <GIC_SPI 428 IRQ_TYPE_EDGE_RISING>;
2813                         power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
2814                         clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
2815                                  <&camcc CAM_CC_CPAS_AHB_CLK>,
2816                                  <&camcc CAM_CC_CCI_2_CLK>;
2817                         clock-names = "camnoc_axi",
2818                                       "cpas_ahb",
2819                                       "cci";
2820                         pinctrl-0 = <&cci2_0_default &cci2_1_default>;
2821                         pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>;
2822                         pinctrl-names = "default", "sleep";
2823                         status = "disabled";
2824                         #address-cells = <1>;
2825                         #size-cells = <0>;
2826 
2827                         cci2_i2c0: i2c-bus@0 {
2828                                 reg = <0>;
2829                                 clock-frequency = <1000000>;
2830                                 #address-cells = <1>;
2831                                 #size-cells = <0>;
2832                         };
2833 
2834                         cci2_i2c1: i2c-bus@1 {
2835                                 reg = <1>;
2836                                 clock-frequency = <1000000>;
2837                                 #address-cells = <1>;
2838                                 #size-cells = <0>;
2839                         };
2840                 };
2841 
2842                 camcc: clock-controller@ade0000 {
2843                         compatible = "qcom,sm8550-camcc";
2844                         reg = <0 0x0ade0000 0 0x20000>;
2845                         clocks = <&gcc GCC_CAMERA_AHB_CLK>,
2846                                  <&bi_tcxo_div2>,
2847                                  <&bi_tcxo_ao_div2>,
2848                                  <&sleep_clk>;
2849                         power-domains = <&rpmhpd SM8550_MMCX>;
2850                         required-opps = <&rpmhpd_opp_low_svs>;
2851                         #clock-cells = <1>;
2852                         #reset-cells = <1>;
2853                         #power-domain-cells = <1>;
2854                 };
2855 
2856                 mdss: display-subsystem@ae00000 {
2857                         compatible = "qcom,sm8550-mdss";
2858                         reg = <0 0x0ae00000 0 0x1000>;
2859                         reg-names = "mdss";
2860 
2861                         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
2862                         interrupt-controller;
2863                         #interrupt-cells = <1>;
2864 
2865                         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
2866                                  <&gcc GCC_DISP_AHB_CLK>,
2867                                  <&gcc GCC_DISP_HF_AXI_CLK>,
2868                                  <&dispcc DISP_CC_MDSS_MDP_CLK>;
2869 
2870                         resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
2871 
2872                         power-domains = <&dispcc MDSS_GDSC>;
2873 
2874                         interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
2875                                         <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
2876                         interconnect-names = "mdp0-mem", "mdp1-mem";
2877 
2878                         iommus = <&apps_smmu 0x1c00 0x2>;
2879 
2880                         #address-cells = <2>;
2881                         #size-cells = <2>;
2882                         ranges;
2883 
2884                         status = "disabled";
2885 
2886                         mdss_mdp: display-controller@ae01000 {
2887                                 compatible = "qcom,sm8550-dpu";
2888                                 reg = <0 0x0ae01000 0 0x8f000>,
2889                                       <0 0x0aeb0000 0 0x2008>;
2890                                 reg-names = "mdp", "vbif";
2891 
2892                                 interrupt-parent = <&mdss>;
2893                                 interrupts = <0>;
2894 
2895                                 clocks = <&gcc GCC_DISP_AHB_CLK>,
2896                                          <&gcc GCC_DISP_HF_AXI_CLK>,
2897                                          <&dispcc DISP_CC_MDSS_AHB_CLK>,
2898                                          <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
2899                                          <&dispcc DISP_CC_MDSS_MDP_CLK>,
2900                                          <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
2901                                 clock-names = "bus",
2902                                               "nrt_bus",
2903                                               "iface",
2904                                               "lut",
2905                                               "core",
2906                                               "vsync";
2907 
2908                                 power-domains = <&rpmhpd RPMHPD_MMCX>;
2909 
2910                                 assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
2911                                 assigned-clock-rates = <19200000>;
2912 
2913                                 operating-points-v2 = <&mdp_opp_table>;
2914 
2915                                 ports {
2916                                         #address-cells = <1>;
2917                                         #size-cells = <0>;
2918 
2919                                         port@0 {
2920                                                 reg = <0>;
2921                                                 dpu_intf1_out: endpoint {
2922                                                         remote-endpoint = <&mdss_dsi0_in>;
2923                                                 };
2924                                         };
2925 
2926                                         port@1 {
2927                                                 reg = <1>;
2928                                                 dpu_intf2_out: endpoint {
2929                                                         remote-endpoint = <&mdss_dsi1_in>;
2930                                                 };
2931                                         };
2932 
2933                                         port@2 {
2934                                                 reg = <2>;
2935                                                 dpu_intf0_out: endpoint {
2936                                                         remote-endpoint = <&mdss_dp0_in>;
2937                                                 };
2938                                         };
2939                                 };
2940 
2941                                 mdp_opp_table: opp-table {
2942                                         compatible = "operating-points-v2";
2943 
2944                                         opp-200000000 {
2945                                                 opp-hz = /bits/ 64 <200000000>;
2946                                                 required-opps = <&rpmhpd_opp_low_svs>;
2947                                         };
2948 
2949                                         opp-325000000 {
2950                                                 opp-hz = /bits/ 64 <325000000>;
2951                                                 required-opps = <&rpmhpd_opp_svs>;
2952                                         };
2953 
2954                                         opp-375000000 {
2955                                                 opp-hz = /bits/ 64 <375000000>;
2956                                                 required-opps = <&rpmhpd_opp_svs_l1>;
2957                                         };
2958 
2959                                         opp-514000000 {
2960                                                 opp-hz = /bits/ 64 <514000000>;
2961                                                 required-opps = <&rpmhpd_opp_nom>;
2962                                         };
2963                                 };
2964                         };
2965 
2966                         mdss_dp0: displayport-controller@ae90000 {
2967                                 compatible = "qcom,sm8550-dp", "qcom,sm8350-dp";
2968                                 reg = <0 0xae90000 0 0x200>,
2969                                       <0 0xae90200 0 0x200>,
2970                                       <0 0xae90400 0 0xc00>,
2971                                       <0 0xae91000 0 0x400>,
2972                                       <0 0xae91400 0 0x400>;
2973                                 interrupt-parent = <&mdss>;
2974                                 interrupts = <12>;
2975                                 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
2976                                          <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
2977                                          <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
2978                                          <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
2979                                          <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
2980                                 clock-names = "core_iface",
2981                                               "core_aux",
2982                                               "ctrl_link",
2983                                               "ctrl_link_iface",
2984                                               "stream_pixel";
2985 
2986                                 assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
2987                                                   <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
2988                                 assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
2989                                                          <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
2990 
2991                                 phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
2992                                 phy-names = "dp";
2993 
2994                                 #sound-dai-cells = <0>;
2995 
2996                                 operating-points-v2 = <&dp_opp_table>;
2997                                 power-domains = <&rpmhpd RPMHPD_MMCX>;
2998 
2999                                 status = "disabled";
3000 
3001                                 ports {
3002                                         #address-cells = <1>;
3003                                         #size-cells = <0>;
3004 
3005                                         port@0 {
3006                                                 reg = <0>;
3007                                                 mdss_dp0_in: endpoint {
3008                                                         remote-endpoint = <&dpu_intf0_out>;
3009                                                 };
3010                                         };
3011 
3012                                         port@1 {
3013                                                 reg = <1>;
3014                                                 mdss_dp0_out: endpoint {
3015                                                         remote-endpoint = <&usb_dp_qmpphy_dp_in>;
3016                                                 };
3017                                         };
3018                                 };
3019 
3020                                 dp_opp_table: opp-table {
3021                                         compatible = "operating-points-v2";
3022 
3023                                         opp-162000000 {
3024                                                 opp-hz = /bits/ 64 <162000000>;
3025                                                 required-opps = <&rpmhpd_opp_low_svs_d1>;
3026                                         };
3027 
3028                                         opp-270000000 {
3029                                                 opp-hz = /bits/ 64 <270000000>;
3030                                                 required-opps = <&rpmhpd_opp_low_svs>;
3031                                         };
3032 
3033                                         opp-540000000 {
3034                                                 opp-hz = /bits/ 64 <540000000>;
3035                                                 required-opps = <&rpmhpd_opp_svs_l1>;
3036                                         };
3037 
3038                                         opp-810000000 {
3039                                                 opp-hz = /bits/ 64 <810000000>;
3040                                                 required-opps = <&rpmhpd_opp_nom>;
3041                                         };
3042                                 };
3043                         };
3044 
3045                         mdss_dsi0: dsi@ae94000 {
3046                                 compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl";
3047                                 reg = <0 0x0ae94000 0 0x400>;
3048                                 reg-names = "dsi_ctrl";
3049 
3050                                 interrupt-parent = <&mdss>;
3051                                 interrupts = <4>;
3052 
3053                                 clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
3054                                          <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
3055                                          <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
3056                                          <&dispcc DISP_CC_MDSS_ESC0_CLK>,
3057                                          <&dispcc DISP_CC_MDSS_AHB_CLK>,
3058                                          <&gcc GCC_DISP_HF_AXI_CLK>;
3059                                 clock-names = "byte",
3060                                               "byte_intf",
3061                                               "pixel",
3062                                               "core",
3063                                               "iface",
3064                                               "bus";
3065 
3066                                 power-domains = <&rpmhpd RPMHPD_MMCX>;
3067 
3068                                 assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
3069                                                   <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
3070                                 assigned-clock-parents = <&mdss_dsi0_phy 0>,
3071                                                          <&mdss_dsi0_phy 1>;
3072 
3073                                 operating-points-v2 = <&mdss_dsi_opp_table>;
3074 
3075                                 phys = <&mdss_dsi0_phy>;
3076                                 phy-names = "dsi";
3077 
3078                                 #address-cells = <1>;
3079                                 #size-cells = <0>;
3080 
3081                                 status = "disabled";
3082 
3083                                 ports {
3084                                         #address-cells = <1>;
3085                                         #size-cells = <0>;
3086 
3087                                         port@0 {
3088                                                 reg = <0>;
3089                                                 mdss_dsi0_in: endpoint {
3090                                                         remote-endpoint = <&dpu_intf1_out>;
3091                                                 };
3092                                         };
3093 
3094                                         port@1 {
3095                                                 reg = <1>;
3096                                                 mdss_dsi0_out: endpoint {
3097                                                 };
3098                                         };
3099                                 };
3100 
3101                                 mdss_dsi_opp_table: opp-table {
3102                                         compatible = "operating-points-v2";
3103 
3104                                         opp-187500000 {
3105                                                 opp-hz = /bits/ 64 <187500000>;
3106                                                 required-opps = <&rpmhpd_opp_low_svs>;
3107                                         };
3108 
3109                                         opp-300000000 {
3110                                                 opp-hz = /bits/ 64 <300000000>;
3111                                                 required-opps = <&rpmhpd_opp_svs>;
3112                                         };
3113 
3114                                         opp-358000000 {
3115                                                 opp-hz = /bits/ 64 <358000000>;
3116                                                 required-opps = <&rpmhpd_opp_svs_l1>;
3117                                         };
3118                                 };
3119                         };
3120 
3121                         mdss_dsi0_phy: phy@ae95000 {
3122                                 compatible = "qcom,sm8550-dsi-phy-4nm";
3123                                 reg = <0 0x0ae95000 0 0x200>,
3124                                       <0 0x0ae95200 0 0x280>,
3125                                       <0 0x0ae95500 0 0x400>;
3126                                 reg-names = "dsi_phy",
3127                                             "dsi_phy_lane",
3128                                             "dsi_pll";
3129 
3130                                 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
3131                                          <&rpmhcc RPMH_CXO_CLK>;
3132                                 clock-names = "iface", "ref";
3133 
3134                                 #clock-cells = <1>;
3135                                 #phy-cells = <0>;
3136 
3137                                 status = "disabled";
3138                         };
3139 
3140                         mdss_dsi1: dsi@ae96000 {
3141                                 compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl";
3142                                 reg = <0 0x0ae96000 0 0x400>;
3143                                 reg-names = "dsi_ctrl";
3144 
3145                                 interrupt-parent = <&mdss>;
3146                                 interrupts = <5>;
3147 
3148                                 clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
3149                                          <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
3150                                          <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
3151                                          <&dispcc DISP_CC_MDSS_ESC1_CLK>,
3152                                          <&dispcc DISP_CC_MDSS_AHB_CLK>,
3153                                          <&gcc GCC_DISP_HF_AXI_CLK>;
3154                                 clock-names = "byte",
3155                                               "byte_intf",
3156                                               "pixel",
3157                                               "core",
3158                                               "iface",
3159                                               "bus";
3160 
3161                                 power-domains = <&rpmhpd RPMHPD_MMCX>;
3162 
3163                                 assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
3164                                                   <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
3165                                 assigned-clock-parents = <&mdss_dsi1_phy 0>,
3166                                                          <&mdss_dsi1_phy 1>;
3167 
3168                                 operating-points-v2 = <&mdss_dsi_opp_table>;
3169 
3170                                 phys = <&mdss_dsi1_phy>;
3171                                 phy-names = "dsi";
3172 
3173                                 #address-cells = <1>;
3174                                 #size-cells = <0>;
3175 
3176                                 status = "disabled";
3177 
3178                                 ports {
3179                                         #address-cells = <1>;
3180                                         #size-cells = <0>;
3181 
3182                                         port@0 {
3183                                                 reg = <0>;
3184                                                 mdss_dsi1_in: endpoint {
3185                                                         remote-endpoint = <&dpu_intf2_out>;
3186                                                 };
3187                                         };
3188 
3189                                         port@1 {
3190                                                 reg = <1>;
3191                                                 mdss_dsi1_out: endpoint {
3192                                                 };
3193                                         };
3194                                 };
3195                         };
3196 
3197                         mdss_dsi1_phy: phy@ae97000 {
3198                                 compatible = "qcom,sm8550-dsi-phy-4nm";
3199                                 reg = <0 0x0ae97000 0 0x200>,
3200                                       <0 0x0ae97200 0 0x280>,
3201                                       <0 0x0ae97500 0 0x400>;
3202                                 reg-names = "dsi_phy",
3203                                             "dsi_phy_lane",
3204                                             "dsi_pll";
3205 
3206                                 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
3207                                          <&rpmhcc RPMH_CXO_CLK>;
3208                                 clock-names = "iface", "ref";
3209 
3210                                 #clock-cells = <1>;
3211                                 #phy-cells = <0>;
3212 
3213                                 status = "disabled";
3214                         };
3215                 };
3216 
3217                 dispcc: clock-controller@af00000 {
3218                         compatible = "qcom,sm8550-dispcc";
3219                         reg = <0 0x0af00000 0 0x20000>;
3220                         clocks = <&bi_tcxo_div2>,
3221                                  <&bi_tcxo_ao_div2>,
3222                                  <&gcc GCC_DISP_AHB_CLK>,
3223                                  <&sleep_clk>,
3224                                  <&mdss_dsi0_phy 0>,
3225                                  <&mdss_dsi0_phy 1>,
3226                                  <&mdss_dsi1_phy 0>,
3227                                  <&mdss_dsi1_phy 1>,
3228                                  <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
3229                                  <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
3230                                  <0>, /* dp1 */
3231                                  <0>,
3232                                  <0>, /* dp2 */
3233                                  <0>,
3234                                  <0>, /* dp3 */
3235                                  <0>;
3236                         power-domains = <&rpmhpd RPMHPD_MMCX>;
3237                         required-opps = <&rpmhpd_opp_low_svs>;
3238                         #clock-cells = <1>;
3239                         #reset-cells = <1>;
3240                         #power-domain-cells = <1>;
3241                 };
3242 
3243                 usb_1_hsphy: phy@88e3000 {
3244                         compatible = "qcom,sm8550-snps-eusb2-phy";
3245                         reg = <0x0 0x088e3000 0x0 0x154>;
3246                         #phy-cells = <0>;
3247 
3248                         clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
3249                         clock-names = "ref";
3250 
3251                         resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
3252 
3253                         status = "disabled";
3254                 };
3255 
3256                 usb_dp_qmpphy: phy@88e8000 {
3257                         compatible = "qcom,sm8550-qmp-usb3-dp-phy";
3258                         reg = <0x0 0x088e8000 0x0 0x3000>;
3259 
3260                         clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
3261                                  <&rpmhcc RPMH_CXO_CLK>,
3262                                  <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
3263                                  <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
3264                         clock-names = "aux", "ref", "com_aux", "usb3_pipe";
3265 
3266                         power-domains = <&gcc USB3_PHY_GDSC>;
3267 
3268                         resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
3269                                  <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
3270                         reset-names = "phy", "common";
3271 
3272                         #clock-cells = <1>;
3273                         #phy-cells = <1>;
3274 
3275                         orientation-switch;
3276 
3277                         status = "disabled";
3278 
3279                         ports {
3280                                 #address-cells = <1>;
3281                                 #size-cells = <0>;
3282 
3283                                 port@0 {
3284                                         reg = <0>;
3285 
3286                                         usb_dp_qmpphy_out: endpoint {
3287                                         };
3288                                 };
3289 
3290                                 port@1 {
3291                                         reg = <1>;
3292 
3293                                         usb_dp_qmpphy_usb_ss_in: endpoint {
3294                                                 remote-endpoint = <&usb_1_dwc3_ss>;
3295                                         };
3296                                 };
3297 
3298                                 port@2 {
3299                                         reg = <2>;
3300 
3301                                         usb_dp_qmpphy_dp_in: endpoint {
3302                                                 remote-endpoint = <&mdss_dp0_out>;
3303                                         };
3304                                 };
3305                         };
3306                 };
3307 
3308                 usb_1: usb@a6f8800 {
3309                         compatible = "qcom,sm8550-dwc3", "qcom,dwc3";
3310                         reg = <0x0 0x0a6f8800 0x0 0x400>;
3311                         #address-cells = <2>;
3312                         #size-cells = <2>;
3313                         ranges;
3314 
3315                         clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
3316                                  <&gcc GCC_USB30_PRIM_MASTER_CLK>,
3317                                  <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
3318                                  <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
3319                                  <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
3320                                  <&tcsr TCSR_USB3_CLKREF_EN>;
3321                         clock-names = "cfg_noc",
3322                                       "core",
3323                                       "iface",
3324                                       "sleep",
3325                                       "mock_utmi",
3326                                       "xo";
3327 
3328                         assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
3329                                           <&gcc GCC_USB30_PRIM_MASTER_CLK>;
3330                         assigned-clock-rates = <19200000>, <200000000>;
3331 
3332                         interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
3333                                               <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
3334                                               <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
3335                                               <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
3336                                               <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
3337                         interrupt-names = "pwr_event",
3338                                           "hs_phy_irq",
3339                                           "dp_hs_phy_irq",
3340                                           "dm_hs_phy_irq",
3341                                           "ss_phy_irq";
3342 
3343                         power-domains = <&gcc USB30_PRIM_GDSC>;
3344                         required-opps = <&rpmhpd_opp_nom>;
3345 
3346                         resets = <&gcc GCC_USB30_PRIM_BCR>;
3347 
3348                         interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
3349                                         <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
3350                         interconnect-names = "usb-ddr", "apps-usb";
3351 
3352                         status = "disabled";
3353 
3354                         usb_1_dwc3: usb@a600000 {
3355                                 compatible = "snps,dwc3";
3356                                 reg = <0x0 0x0a600000 0x0 0xcd00>;
3357                                 interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
3358                                 iommus = <&apps_smmu 0x40 0x0>;
3359                                 phys = <&usb_1_hsphy>,
3360                                        <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
3361                                 phy-names = "usb2-phy", "usb3-phy";
3362                                 snps,hird-threshold = /bits/ 8 <0x0>;
3363                                 snps,usb2-gadget-lpm-disable;
3364                                 snps,dis_u2_susphy_quirk;
3365                                 snps,dis_enblslpm_quirk;
3366                                 snps,dis-u1-entry-quirk;
3367                                 snps,dis-u2-entry-quirk;
3368                                 snps,is-utmi-l1-suspend;
3369                                 snps,usb3_lpm_capable;
3370                                 snps,usb2-lpm-disable;
3371                                 snps,has-lpm-erratum;
3372                                 tx-fifo-resize;
3373                                 dma-coherent;
3374                                 usb-role-switch;
3375 
3376                                 ports {
3377                                         #address-cells = <1>;
3378                                         #size-cells = <0>;
3379 
3380                                         port@0 {
3381                                                 reg = <0>;
3382 
3383                                                 usb_1_dwc3_hs: endpoint {
3384                                                 };
3385                                         };
3386 
3387                                         port@1 {
3388                                                 reg = <1>;
3389 
3390                                                 usb_1_dwc3_ss: endpoint {
3391                                                         remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
3392                                                 };
3393                                         };
3394                                 };
3395                         };
3396                 };
3397 
3398                 pdc: interrupt-controller@b220000 {
3399                         compatible = "qcom,sm8550-pdc", "qcom,pdc";
3400                         reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
3401                         qcom,pdc-ranges = <0 480 94>, <94 609 31>,
3402                                           <125 63 1>, <126 716 12>,
3403                                           <138 251 5>;
3404                         #interrupt-cells = <2>;
3405                         interrupt-parent = <&intc>;
3406                         interrupt-controller;
3407                 };
3408 
3409                 tsens0: thermal-sensor@c271000 {
3410                         compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
3411                         reg = <0 0x0c271000 0 0x1000>, /* TM */
3412                               <0 0x0c222000 0 0x1000>; /* SROT */
3413                         #qcom,sensors = <16>;
3414                         interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
3415                                      <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
3416                         interrupt-names = "uplow", "critical";
3417                         #thermal-sensor-cells = <1>;
3418                 };
3419 
3420                 tsens1: thermal-sensor@c272000 {
3421                         compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
3422                         reg = <0 0x0c272000 0 0x1000>, /* TM */
3423                               <0 0x0c223000 0 0x1000>; /* SROT */
3424                         #qcom,sensors = <16>;
3425                         interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
3426                                      <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
3427                         interrupt-names = "uplow", "critical";
3428                         #thermal-sensor-cells = <1>;
3429                 };
3430 
3431                 tsens2: thermal-sensor@c273000 {
3432                         compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
3433                         reg = <0 0x0c273000 0 0x1000>, /* TM */
3434                               <0 0x0c224000 0 0x1000>; /* SROT */
3435                         #qcom,sensors = <16>;
3436                         interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
3437                                      <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
3438                         interrupt-names = "uplow", "critical";
3439                         #thermal-sensor-cells = <1>;
3440                 };
3441 
3442                 aoss_qmp: power-management@c300000 {
3443                         compatible = "qcom,sm8550-aoss-qmp", "qcom,aoss-qmp";
3444                         reg = <0 0x0c300000 0 0x400>;
3445                         interrupt-parent = <&ipcc>;
3446                         interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
3447                                                      IRQ_TYPE_EDGE_RISING>;
3448                         mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
3449 
3450                         #clock-cells = <0>;
3451                 };
3452 
3453                 sram@c3f0000 {
3454                         compatible = "qcom,rpmh-stats";
3455                         reg = <0 0x0c3f0000 0 0x400>;
3456                 };
3457 
3458                 spmi_bus: spmi@c400000 {
3459                         compatible = "qcom,spmi-pmic-arb";
3460                         reg = <0 0x0c400000 0 0x3000>,
3461                               <0 0x0c500000 0 0x400000>,
3462                               <0 0x0c440000 0 0x80000>,
3463                               <0 0x0c4c0000 0 0x20000>,
3464                               <0 0x0c42d000 0 0x4000>;
3465                         reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
3466                         interrupt-names = "periph_irq";
3467                         interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
3468                         qcom,ee = <0>;
3469                         qcom,channel = <0>;
3470                         qcom,bus-id = <0>;
3471                         #address-cells = <2>;
3472                         #size-cells = <0>;
3473                         interrupt-controller;
3474                         #interrupt-cells = <4>;
3475                 };
3476 
3477                 tlmm: pinctrl@f100000 {
3478                         compatible = "qcom,sm8550-tlmm";
3479                         reg = <0 0x0f100000 0 0x300000>;
3480                         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
3481                         gpio-controller;
3482                         #gpio-cells = <2>;
3483                         interrupt-controller;
3484                         #interrupt-cells = <2>;
3485                         gpio-ranges = <&tlmm 0 0 211>;
3486                         wakeup-parent = <&pdc>;
3487 
3488                         cci0_0_default: cci0-0-default-state {
3489                                 sda-pins {
3490                                         pins = "gpio110";
3491                                         function = "cci_i2c_sda";
3492                                         drive-strength = <2>;
3493                                         bias-pull-up = <2200>;
3494                                 };
3495 
3496                                 scl-pins {
3497                                         pins = "gpio111";
3498                                         function = "cci_i2c_scl";
3499                                         drive-strength = <2>;
3500                                         bias-pull-up = <2200>;
3501                                 };
3502                         };
3503 
3504                         cci0_0_sleep: cci0-0-sleep-state {
3505                                 sda-pins {
3506                                         pins = "gpio110";
3507                                         function = "cci_i2c_sda";
3508                                         drive-strength = <2>;
3509                                         bias-pull-down;
3510                                 };
3511 
3512                                 scl-pins {
3513                                         pins = "gpio111";
3514                                         function = "cci_i2c_scl";
3515                                         drive-strength = <2>;
3516                                         bias-pull-down;
3517                                 };
3518                         };
3519 
3520                         cci0_1_default: cci0-1-default-state {
3521                                 sda-pins {
3522                                         pins = "gpio112";
3523                                         function = "cci_i2c_sda";
3524                                         drive-strength = <2>;
3525                                         bias-pull-up = <2200>;
3526                                 };
3527 
3528                                 scl-pins {
3529                                         pins = "gpio113";
3530                                         function = "cci_i2c_scl";
3531                                         drive-strength = <2>;
3532                                         bias-pull-up = <2200>;
3533                                 };
3534                         };
3535 
3536                         cci0_1_sleep: cci0-1-sleep-state {
3537                                 sda-pins {
3538                                         pins = "gpio112";
3539                                         function = "cci_i2c_sda";
3540                                         drive-strength = <2>;
3541                                         bias-pull-down;
3542                                 };
3543 
3544                                 scl-pins {
3545                                         pins = "gpio113";
3546                                         function = "cci_i2c_scl";
3547                                         drive-strength = <2>;
3548                                         bias-pull-down;
3549                                 };
3550                         };
3551 
3552                         cci1_0_default: cci1-0-default-state {
3553                                 sda-pins {
3554                                         pins = "gpio114";
3555                                         function = "cci_i2c_sda";
3556                                         drive-strength = <2>;
3557                                         bias-pull-up = <2200>;
3558                                 };
3559 
3560                                 scl-pins {
3561                                         pins = "gpio115";
3562                                         function = "cci_i2c_scl";
3563                                         drive-strength = <2>;
3564                                         bias-pull-up = <2200>;
3565                                 };
3566                         };
3567 
3568                         cci1_0_sleep: cci1-0-sleep-state {
3569                                 sda-pins {
3570                                         pins = "gpio114";
3571                                         function = "cci_i2c_sda";
3572                                         drive-strength = <2>;
3573                                         bias-pull-down;
3574                                 };
3575 
3576                                 scl-pins {
3577                                         pins = "gpio115";
3578                                         function = "cci_i2c_scl";
3579                                         drive-strength = <2>;
3580                                         bias-pull-down;
3581                                 };
3582                         };
3583 
3584                         cci2_0_default: cci2-0-default-state {
3585                                 sda-pins {
3586                                         pins = "gpio74";
3587                                         function = "cci_i2c_sda";
3588                                         drive-strength = <2>;
3589                                         bias-pull-up = <2200>;
3590                                 };
3591 
3592                                 scl-pins {
3593                                         pins = "gpio75";
3594                                         function = "cci_i2c_scl";
3595                                         drive-strength = <2>;
3596                                         bias-pull-up = <2200>;
3597                                 };
3598                         };
3599 
3600                         cci2_0_sleep: cci2-0-sleep-state {
3601                                 sda-pins {
3602                                         pins = "gpio74";
3603                                         function = "cci_i2c_sda";
3604                                         drive-strength = <2>;
3605                                         bias-pull-down;
3606                                 };
3607 
3608                                 scl-pins {
3609                                         pins = "gpio75";
3610                                         function = "cci_i2c_scl";
3611                                         drive-strength = <2>;
3612                                         bias-pull-down;
3613                                 };
3614                         };
3615 
3616                         cci2_1_default: cci2-1-default-state {
3617                                 sda-pins {
3618                                         pins = "gpio0";
3619                                         function = "cci_i2c_sda";
3620                                         drive-strength = <2>;
3621                                         bias-pull-up = <2200>;
3622                                 };
3623 
3624                                 scl-pins {
3625                                         pins = "gpio1";
3626                                         function = "cci_i2c_scl";
3627                                         drive-strength = <2>;
3628                                         bias-pull-up = <2200>;
3629                                 };
3630                         };
3631 
3632                         cci2_1_sleep: cci2-1-sleep-state {
3633                                 sda-pins {
3634                                         pins = "gpio0";
3635                                         function = "cci_i2c_sda";
3636                                         drive-strength = <2>;
3637                                         bias-pull-down;
3638                                 };
3639 
3640                                 scl-pins {
3641                                         pins = "gpio1";
3642                                         function = "cci_i2c_scl";
3643                                         drive-strength = <2>;
3644                                         bias-pull-down;
3645                                 };
3646                         };
3647 
3648                         hub_i2c0_data_clk: hub-i2c0-data-clk-state {
3649                                 /* SDA, SCL */
3650                                 pins = "gpio16", "gpio17";
3651                                 function = "i2chub0_se0";
3652                                 drive-strength = <2>;
3653                                 bias-pull-up;
3654                         };
3655 
3656                         hub_i2c1_data_clk: hub-i2c1-data-clk-state {
3657                                 /* SDA, SCL */
3658                                 pins = "gpio18", "gpio19";
3659                                 function = "i2chub0_se1";
3660                                 drive-strength = <2>;
3661                                 bias-pull-up;
3662                         };
3663 
3664                         hub_i2c2_data_clk: hub-i2c2-data-clk-state {
3665                                 /* SDA, SCL */
3666                                 pins = "gpio20", "gpio21";
3667                                 function = "i2chub0_se2";
3668                                 drive-strength = <2>;
3669                                 bias-pull-up;
3670                         };
3671 
3672                         hub_i2c3_data_clk: hub-i2c3-data-clk-state {
3673                                 /* SDA, SCL */
3674                                 pins = "gpio22", "gpio23";
3675                                 function = "i2chub0_se3";
3676                                 drive-strength = <2>;
3677                                 bias-pull-up;
3678                         };
3679 
3680                         hub_i2c4_data_clk: hub-i2c4-data-clk-state {
3681                                 /* SDA, SCL */
3682                                 pins = "gpio4", "gpio5";
3683                                 function = "i2chub0_se4";
3684                                 drive-strength = <2>;
3685                                 bias-pull-up;
3686                         };
3687 
3688                         hub_i2c5_data_clk: hub-i2c5-data-clk-state {
3689                                 /* SDA, SCL */
3690                                 pins = "gpio6", "gpio7";
3691                                 function = "i2chub0_se5";
3692                                 drive-strength = <2>;
3693                                 bias-pull-up;
3694                         };
3695 
3696                         hub_i2c6_data_clk: hub-i2c6-data-clk-state {
3697                                 /* SDA, SCL */
3698                                 pins = "gpio8", "gpio9";
3699                                 function = "i2chub0_se6";
3700                                 drive-strength = <2>;
3701                                 bias-pull-up;
3702                         };
3703 
3704                         hub_i2c7_data_clk: hub-i2c7-data-clk-state {
3705                                 /* SDA, SCL */
3706                                 pins = "gpio10", "gpio11";
3707                                 function = "i2chub0_se7";
3708                                 drive-strength = <2>;
3709                                 bias-pull-up;
3710                         };
3711 
3712                         hub_i2c8_data_clk: hub-i2c8-data-clk-state {
3713                                 /* SDA, SCL */
3714                                 pins = "gpio206", "gpio207";
3715                                 function = "i2chub0_se8";
3716                                 drive-strength = <2>;
3717                                 bias-pull-up;
3718                         };
3719 
3720                         hub_i2c9_data_clk: hub-i2c9-data-clk-state {
3721                                 /* SDA, SCL */
3722                                 pins = "gpio84", "gpio85";
3723                                 function = "i2chub0_se9";
3724                                 drive-strength = <2>;
3725                                 bias-pull-up;
3726                         };
3727 
3728                         pcie0_default_state: pcie0-default-state {
3729                                 perst-pins {
3730                                         pins = "gpio94";
3731                                         function = "gpio";
3732                                         drive-strength = <2>;
3733                                         bias-pull-down;
3734                                 };
3735 
3736                                 clkreq-pins {
3737                                         pins = "gpio95";
3738                                         function = "pcie0_clk_req_n";
3739                                         drive-strength = <2>;
3740                                         bias-pull-up;
3741                                 };
3742 
3743                                 wake-pins {
3744                                         pins = "gpio96";
3745                                         function = "gpio";
3746                                         drive-strength = <2>;
3747                                         bias-pull-up;
3748                                 };
3749                         };
3750 
3751                         pcie1_default_state: pcie1-default-state {
3752                                 perst-pins {
3753                                         pins = "gpio97";
3754                                         function = "gpio";
3755                                         drive-strength = <2>;
3756                                         bias-pull-down;
3757                                 };
3758 
3759                                 clkreq-pins {
3760                                         pins = "gpio98";
3761                                         function = "pcie1_clk_req_n";
3762                                         drive-strength = <2>;
3763                                         bias-pull-up;
3764                                 };
3765 
3766                                 wake-pins {
3767                                         pins = "gpio99";
3768                                         function = "gpio";
3769                                         drive-strength = <2>;
3770                                         bias-pull-up;
3771                                 };
3772                         };
3773 
3774                         qup_i2c0_data_clk: qup-i2c0-data-clk-state {
3775                                 /* SDA, SCL */
3776                                 pins = "gpio28", "gpio29";
3777                                 function = "qup1_se0";
3778                                 drive-strength = <2>;
3779                                 bias-pull-up = <2200>;
3780                         };
3781 
3782                         qup_i2c1_data_clk: qup-i2c1-data-clk-state {
3783                                 /* SDA, SCL */
3784                                 pins = "gpio32", "gpio33";
3785                                 function = "qup1_se1";
3786                                 drive-strength = <2>;
3787                                 bias-pull-up = <2200>;
3788                         };
3789 
3790                         qup_i2c2_data_clk: qup-i2c2-data-clk-state {
3791                                 /* SDA, SCL */
3792                                 pins = "gpio36", "gpio37";
3793                                 function = "qup1_se2";
3794                                 drive-strength = <2>;
3795                                 bias-pull-up = <2200>;
3796                         };
3797 
3798                         qup_i2c3_data_clk: qup-i2c3-data-clk-state {
3799                                 /* SDA, SCL */
3800                                 pins = "gpio40", "gpio41";
3801                                 function = "qup1_se3";
3802                                 drive-strength = <2>;
3803                                 bias-pull-up = <2200>;
3804                         };
3805 
3806                         qup_i2c4_data_clk: qup-i2c4-data-clk-state {
3807                                 /* SDA, SCL */
3808                                 pins = "gpio44", "gpio45";
3809                                 function = "qup1_se4";
3810                                 drive-strength = <2>;
3811                                 bias-pull-up = <2200>;
3812                         };
3813 
3814                         qup_i2c5_data_clk: qup-i2c5-data-clk-state {
3815                                 /* SDA, SCL */
3816                                 pins = "gpio52", "gpio53";
3817                                 function = "qup1_se5";
3818                                 drive-strength = <2>;
3819                                 bias-pull-up = <2200>;
3820                         };
3821 
3822                         qup_i2c6_data_clk: qup-i2c6-data-clk-state {
3823                                 /* SDA, SCL */
3824                                 pins = "gpio48", "gpio49";
3825                                 function = "qup1_se6";
3826                                 drive-strength = <2>;
3827                                 bias-pull-up = <2200>;
3828                         };
3829 
3830                         qup_i2c8_data_clk: qup-i2c8-data-clk-state {
3831                                 scl-pins {
3832                                         pins = "gpio57";
3833                                         function = "qup2_se0_l1_mira";
3834                                         drive-strength = <2>;
3835                                         bias-pull-up = <2200>;
3836                                 };
3837 
3838                                 sda-pins {
3839                                         pins = "gpio56";
3840                                         function = "qup2_se0_l0_mira";
3841                                         drive-strength = <2>;
3842                                         bias-pull-up = <2200>;
3843                                 };
3844                         };
3845 
3846                         qup_i2c9_data_clk: qup-i2c9-data-clk-state {
3847                                 /* SDA, SCL */
3848                                 pins = "gpio60", "gpio61";
3849                                 function = "qup2_se1";
3850                                 drive-strength = <2>;
3851                                 bias-pull-up = <2200>;
3852                         };
3853 
3854                         qup_i2c10_data_clk: qup-i2c10-data-clk-state {
3855                                 /* SDA, SCL */
3856                                 pins = "gpio64", "gpio65";
3857                                 function = "qup2_se2";
3858                                 drive-strength = <2>;
3859                                 bias-pull-up = <2200>;
3860                         };
3861 
3862                         qup_i2c11_data_clk: qup-i2c11-data-clk-state {
3863                                 /* SDA, SCL */
3864                                 pins = "gpio68", "gpio69";
3865                                 function = "qup2_se3";
3866                                 drive-strength = <2>;
3867                                 bias-pull-up = <2200>;
3868                         };
3869 
3870                         qup_i2c12_data_clk: qup-i2c12-data-clk-state {
3871                                 /* SDA, SCL */
3872                                 pins = "gpio2", "gpio3";
3873                                 function = "qup2_se4";
3874                                 drive-strength = <2>;
3875                                 bias-pull-up = <2200>;
3876                         };
3877 
3878                         qup_i2c13_data_clk: qup-i2c13-data-clk-state {
3879                                 /* SDA, SCL */
3880                                 pins = "gpio80", "gpio81";
3881                                 function = "qup2_se5";
3882                                 drive-strength = <2>;
3883                                 bias-pull-up = <2200>;
3884                         };
3885 
3886                         qup_i2c15_data_clk: qup-i2c15-data-clk-state {
3887                                 /* SDA, SCL */
3888                                 pins = "gpio72", "gpio106";
3889                                 function = "qup2_se7";
3890                                 drive-strength = <2>;
3891                                 bias-pull-up = <2200>;
3892                         };
3893 
3894                         qup_spi0_cs: qup-spi0-cs-state {
3895                                 pins = "gpio31";
3896                                 function = "qup1_se0";
3897                                 drive-strength = <6>;
3898                                 bias-disable;
3899                         };
3900 
3901                         qup_spi0_data_clk: qup-spi0-data-clk-state {
3902                                 /* MISO, MOSI, CLK */
3903                                 pins = "gpio28", "gpio29", "gpio30";
3904                                 function = "qup1_se0";
3905                                 drive-strength = <6>;
3906                                 bias-disable;
3907                         };
3908 
3909                         qup_spi1_cs: qup-spi1-cs-state {
3910                                 pins = "gpio35";
3911                                 function = "qup1_se1";
3912                                 drive-strength = <6>;
3913                                 bias-disable;
3914                         };
3915 
3916                         qup_spi1_data_clk: qup-spi1-data-clk-state {
3917                                 /* MISO, MOSI, CLK */
3918                                 pins = "gpio32", "gpio33", "gpio34";
3919                                 function = "qup1_se1";
3920                                 drive-strength = <6>;
3921                                 bias-disable;
3922                         };
3923 
3924                         qup_spi2_cs: qup-spi2-cs-state {
3925                                 pins = "gpio39";
3926                                 function = "qup1_se2";
3927                                 drive-strength = <6>;
3928                                 bias-disable;
3929                         };
3930 
3931                         qup_spi2_data_clk: qup-spi2-data-clk-state {
3932                                 /* MISO, MOSI, CLK */
3933                                 pins = "gpio36", "gpio37", "gpio38";
3934                                 function = "qup1_se2";
3935                                 drive-strength = <6>;
3936                                 bias-disable;
3937                         };
3938 
3939                         qup_spi3_cs: qup-spi3-cs-state {
3940                                 pins = "gpio43";
3941                                 function = "qup1_se3";
3942                                 drive-strength = <6>;
3943                                 bias-disable;
3944                         };
3945 
3946                         qup_spi3_data_clk: qup-spi3-data-clk-state {
3947                                 /* MISO, MOSI, CLK */
3948                                 pins = "gpio40", "gpio41", "gpio42";
3949                                 function = "qup1_se3";
3950                                 drive-strength = <6>;
3951                                 bias-disable;
3952                         };
3953 
3954                         qup_spi4_cs: qup-spi4-cs-state {
3955                                 pins = "gpio47";
3956                                 function = "qup1_se4";
3957                                 drive-strength = <6>;
3958                                 bias-disable;
3959                         };
3960 
3961                         qup_spi4_data_clk: qup-spi4-data-clk-state {
3962                                 /* MISO, MOSI, CLK */
3963                                 pins = "gpio44", "gpio45", "gpio46";
3964                                 function = "qup1_se4";
3965                                 drive-strength = <6>;
3966                                 bias-disable;
3967                         };
3968 
3969                         qup_spi5_cs: qup-spi5-cs-state {
3970                                 pins = "gpio55";
3971                                 function = "qup1_se5";
3972                                 drive-strength = <6>;
3973                                 bias-disable;
3974                         };
3975 
3976                         qup_spi5_data_clk: qup-spi5-data-clk-state {
3977                                 /* MISO, MOSI, CLK */
3978                                 pins = "gpio52", "gpio53", "gpio54";
3979                                 function = "qup1_se5";
3980                                 drive-strength = <6>;
3981                                 bias-disable;
3982                         };
3983 
3984                         qup_spi6_cs: qup-spi6-cs-state {
3985                                 pins = "gpio51";
3986                                 function = "qup1_se6";
3987                                 drive-strength = <6>;
3988                                 bias-disable;
3989                         };
3990 
3991                         qup_spi6_data_clk: qup-spi6-data-clk-state {
3992                                 /* MISO, MOSI, CLK */
3993                                 pins = "gpio48", "gpio49", "gpio50";
3994                                 function = "qup1_se6";
3995                                 drive-strength = <6>;
3996                                 bias-disable;
3997                         };
3998 
3999                         qup_spi8_cs: qup-spi8-cs-state {
4000                                 pins = "gpio59";
4001                                 function = "qup2_se0_l3_mira";
4002                                 drive-strength = <6>;
4003                                 bias-disable;
4004                         };
4005 
4006                         qup_spi8_data_clk: qup-spi8-data-clk-state {
4007                                 /* MISO, MOSI, CLK */
4008                                 pins = "gpio56", "gpio57", "gpio58";
4009                                 function = "qup2_se0_l2_mira";
4010                                 drive-strength = <6>;
4011                                 bias-disable;
4012                         };
4013 
4014                         qup_spi9_cs: qup-spi9-cs-state {
4015                                 pins = "gpio63";
4016                                 function = "qup2_se1";
4017                                 drive-strength = <6>;
4018                                 bias-disable;
4019                         };
4020 
4021                         qup_spi9_data_clk: qup-spi9-data-clk-state {
4022                                 /* MISO, MOSI, CLK */
4023                                 pins = "gpio60", "gpio61", "gpio62";
4024                                 function = "qup2_se1";
4025                                 drive-strength = <6>;
4026                                 bias-disable;
4027                         };
4028 
4029                         qup_spi10_cs: qup-spi10-cs-state {
4030                                 pins = "gpio67";
4031                                 function = "qup2_se2";
4032                                 drive-strength = <6>;
4033                                 bias-disable;
4034                         };
4035 
4036                         qup_spi10_data_clk: qup-spi10-data-clk-state {
4037                                 /* MISO, MOSI, CLK */
4038                                 pins = "gpio64", "gpio65", "gpio66";
4039                                 function = "qup2_se2";
4040                                 drive-strength = <6>;
4041                                 bias-disable;
4042                         };
4043 
4044                         qup_spi11_cs: qup-spi11-cs-state {
4045                                 pins = "gpio71";
4046                                 function = "qup2_se3";
4047                                 drive-strength = <6>;
4048                                 bias-disable;
4049                         };
4050 
4051                         qup_spi11_data_clk: qup-spi11-data-clk-state {
4052                                 /* MISO, MOSI, CLK */
4053                                 pins = "gpio68", "gpio69", "gpio70";
4054                                 function = "qup2_se3";
4055                                 drive-strength = <6>;
4056                                 bias-disable;
4057                         };
4058 
4059                         qup_spi12_cs: qup-spi12-cs-state {
4060                                 pins = "gpio119";
4061                                 function = "qup2_se4";
4062                                 drive-strength = <6>;
4063                                 bias-disable;
4064                         };
4065 
4066                         qup_spi12_data_clk: qup-spi12-data-clk-state {
4067                                 /* MISO, MOSI, CLK */
4068                                 pins = "gpio2", "gpio3", "gpio118";
4069                                 function = "qup2_se4";
4070                                 drive-strength = <6>;
4071                                 bias-disable;
4072                         };
4073 
4074                         qup_spi13_cs: qup-spi13-cs-state {
4075                                 pins = "gpio83";
4076                                 function = "qup2_se5";
4077                                 drive-strength = <6>;
4078                                 bias-disable;
4079                         };
4080 
4081                         qup_spi13_data_clk: qup-spi13-data-clk-state {
4082                                 /* MISO, MOSI, CLK */
4083                                 pins = "gpio80", "gpio81", "gpio82";
4084                                 function = "qup2_se5";
4085                                 drive-strength = <6>;
4086                                 bias-disable;
4087                         };
4088 
4089                         qup_spi15_cs: qup-spi15-cs-state {
4090                                 pins = "gpio75";
4091                                 function = "qup2_se7";
4092                                 drive-strength = <6>;
4093                                 bias-disable;
4094                         };
4095 
4096                         qup_spi15_data_clk: qup-spi15-data-clk-state {
4097                                 /* MISO, MOSI, CLK */
4098                                 pins = "gpio72", "gpio106", "gpio74";
4099                                 function = "qup2_se7";
4100                                 drive-strength = <6>;
4101                                 bias-disable;
4102                         };
4103 
4104                         qup_uart7_default: qup-uart7-default-state {
4105                                 /* TX, RX */
4106                                 pins = "gpio26", "gpio27";
4107                                 function = "qup1_se7";
4108                                 drive-strength = <2>;
4109                                 bias-disable;
4110                         };
4111 
4112                         qup_uart14_default: qup-uart14-default-state {
4113                                 /* TX, RX */
4114                                 pins = "gpio78", "gpio79";
4115                                 function = "qup2_se6";
4116                                 drive-strength = <2>;
4117                                 bias-pull-up;
4118                         };
4119 
4120                         qup_uart14_cts_rts: qup-uart14-cts-rts-state {
4121                                 /* CTS, RTS */
4122                                 pins = "gpio76", "gpio77";
4123                                 function = "qup2_se6";
4124                                 drive-strength = <2>;
4125                                 bias-pull-down;
4126                         };
4127 
4128                         sdc2_sleep: sdc2-sleep-state {
4129                                 clk-pins {
4130                                         pins = "sdc2_clk";
4131                                         bias-disable;
4132                                         drive-strength = <2>;
4133                                 };
4134 
4135                                 cmd-pins {
4136                                         pins = "sdc2_cmd";
4137                                         bias-pull-up;
4138                                         drive-strength = <2>;
4139                                 };
4140 
4141                                 data-pins {
4142                                         pins = "sdc2_data";
4143                                         bias-pull-up;
4144                                         drive-strength = <2>;
4145                                 };
4146                         };
4147 
4148                         sdc2_default: sdc2-default-state {
4149                                 clk-pins {
4150                                         pins = "sdc2_clk";
4151                                         bias-disable;
4152                                         drive-strength = <16>;
4153                                 };
4154 
4155                                 cmd-pins {
4156                                         pins = "sdc2_cmd";
4157                                         bias-pull-up;
4158                                         drive-strength = <10>;
4159                                 };
4160 
4161                                 data-pins {
4162                                         pins = "sdc2_data";
4163                                         bias-pull-up;
4164                                         drive-strength = <10>;
4165                                 };
4166                         };
4167                 };
4168 
4169                 apps_smmu: iommu@15000000 {
4170                         compatible = "qcom,sm8550-smmu-500", "qcom,smmu-500", "arm,mmu-500";
4171                         reg = <0 0x15000000 0 0x100000>;
4172                         #iommu-cells = <2>;
4173                         #global-interrupts = <1>;
4174                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
4175                                      <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
4176                                      <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
4177                                      <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
4178                                      <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
4179                                      <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
4180                                      <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
4181                                      <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
4182                                      <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
4183                                      <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
4184                                      <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
4185                                      <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
4186                                      <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
4187                                      <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
4188                                      <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
4189                                      <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
4190                                      <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
4191                                      <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
4192                                      <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
4193                                      <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
4194                                      <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
4195                                      <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
4196                                      <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
4197                                      <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
4198                                      <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
4199                                      <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
4200                                      <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
4201                                      <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
4202                                      <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
4203                                      <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
4204                                      <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
4205                                      <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
4206                                      <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
4207                                      <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
4208                                      <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
4209                                      <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
4210                                      <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
4211                                      <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
4212                                      <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
4213                                      <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
4214                                      <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
4215                                      <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
4216                                      <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
4217                                      <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
4218                                      <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
4219                                      <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
4220                                      <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
4221                                      <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
4222                                      <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
4223                                      <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
4224                                      <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
4225                                      <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
4226                                      <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
4227                                      <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
4228                                      <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
4229                                      <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
4230                                      <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
4231                                      <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
4232                                      <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
4233                                      <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
4234                                      <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
4235                                      <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
4236                                      <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
4237                                      <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
4238                                      <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
4239                                      <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
4240                                      <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
4241                                      <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
4242                                      <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
4243                                      <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
4244                                      <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
4245                                      <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
4246                                      <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
4247                                      <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
4248                                      <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
4249                                      <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
4250                                      <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
4251                                      <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
4252                                      <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
4253                                      <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
4254                                      <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
4255                                      <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
4256                                      <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
4257                                      <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
4258                                      <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
4259                                      <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
4260                                      <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
4261                                      <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
4262                                      <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
4263                                      <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
4264                                      <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
4265                                      <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
4266                                      <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
4267                                      <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
4268                                      <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
4269                                      <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
4270                                      <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
4271                         dma-coherent;
4272                 };
4273 
4274                 intc: interrupt-controller@17100000 {
4275                         compatible = "arm,gic-v3";
4276                         reg = <0 0x17100000 0 0x10000>,         /* GICD */
4277                               <0 0x17180000 0 0x200000>;        /* GICR * 8 */
4278                         ranges;
4279                         #interrupt-cells = <3>;
4280                         interrupt-controller;
4281                         #redistributor-regions = <1>;
4282                         redistributor-stride = <0 0x40000>;
4283                         interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
4284                         #address-cells = <2>;
4285                         #size-cells = <2>;
4286 
4287                         gic_its: msi-controller@17140000 {
4288                                 compatible = "arm,gic-v3-its";
4289                                 reg = <0 0x17140000 0 0x20000>;
4290                                 msi-controller;
4291                                 #msi-cells = <1>;
4292                         };
4293                 };
4294 
4295                 timer@17420000 {
4296                         compatible = "arm,armv7-timer-mem";
4297                         reg = <0 0x17420000 0 0x1000>;
4298                         ranges = <0 0 0 0x20000000>;
4299                         #address-cells = <1>;
4300                         #size-cells = <1>;
4301 
4302                         frame@17421000 {
4303                                 reg = <0x17421000 0x1000>,
4304                                       <0x17422000 0x1000>;
4305                                 frame-number = <0>;
4306                                 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
4307                                              <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
4308                         };
4309 
4310                         frame@17423000 {
4311                                 reg = <0x17423000 0x1000>;
4312                                 frame-number = <1>;
4313                                 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
4314                                 status = "disabled";
4315                         };
4316 
4317                         frame@17425000 {
4318                                 reg = <0x17425000 0x1000>;
4319                                 frame-number = <2>;
4320                                 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
4321                                 status = "disabled";
4322                         };
4323 
4324                         frame@17427000 {
4325                                 reg = <0x17427000 0x1000>;
4326                                 frame-number = <3>;
4327                                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
4328                                 status = "disabled";
4329                         };
4330 
4331                         frame@17429000 {
4332                                 reg = <0x17429000 0x1000>;
4333                                 frame-number = <4>;
4334                                 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
4335                                 status = "disabled";
4336                         };
4337 
4338                         frame@1742b000 {
4339                                 reg = <0x1742b000 0x1000>;
4340                                 frame-number = <5>;
4341                                 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
4342                                 status = "disabled";
4343                         };
4344 
4345                         frame@1742d000 {
4346                                 reg = <0x1742d000 0x1000>;
4347                                 frame-number = <6>;
4348                                 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
4349                                 status = "disabled";
4350                         };
4351                 };
4352 
4353                 apps_rsc: rsc@17a00000 {
4354                         label = "apps_rsc";
4355                         compatible = "qcom,rpmh-rsc";
4356                         reg = <0 0x17a00000 0 0x10000>,
4357                               <0 0x17a10000 0 0x10000>,
4358                               <0 0x17a20000 0 0x10000>,
4359                               <0 0x17a30000 0 0x10000>;
4360                         reg-names = "drv-0", "drv-1", "drv-2", "drv-3";
4361                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
4362                                      <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
4363                                      <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
4364                         qcom,tcs-offset = <0xd00>;
4365                         qcom,drv-id = <2>;
4366                         qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
4367                                           <WAKE_TCS      2>, <CONTROL_TCS   0>;
4368                         power-domains = <&CLUSTER_PD>;
4369 
4370                         apps_bcm_voter: bcm-voter {
4371                                 compatible = "qcom,bcm-voter";
4372                         };
4373 
4374                         rpmhcc: clock-controller {
4375                                 compatible = "qcom,sm8550-rpmh-clk";
4376                                 #clock-cells = <1>;
4377                                 clock-names = "xo";
4378                                 clocks = <&xo_board>;
4379                         };
4380 
4381                         rpmhpd: power-controller {
4382                                 compatible = "qcom,sm8550-rpmhpd";
4383                                 #power-domain-cells = <1>;
4384                                 operating-points-v2 = <&rpmhpd_opp_table>;
4385 
4386                                 rpmhpd_opp_table: opp-table {
4387                                         compatible = "operating-points-v2";
4388 
4389                                         rpmhpd_opp_ret: opp-16 {
4390                                                 opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
4391                                         };
4392 
4393                                         rpmhpd_opp_min_svs: opp-48 {
4394                                                 opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
4395                                         };
4396 
4397                                         rpmhpd_opp_low_svs_d2: opp-52 {
4398                                                 opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
4399                                         };
4400 
4401                                         rpmhpd_opp_low_svs_d1: opp-56 {
4402                                                 opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
4403                                         };
4404 
4405                                         rpmhpd_opp_low_svs_d0: opp-60 {
4406                                                 opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
4407                                         };
4408 
4409                                         rpmhpd_opp_low_svs: opp-64 {
4410                                                 opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
4411                                         };
4412 
4413                                         rpmhpd_opp_low_svs_l1: opp-80 {
4414                                                 opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
4415                                         };
4416 
4417                                         rpmhpd_opp_svs: opp-128 {
4418                                                 opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
4419                                         };
4420 
4421                                         rpmhpd_opp_svs_l0: opp-144 {
4422                                                 opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
4423                                         };
4424 
4425                                         rpmhpd_opp_svs_l1: opp-192 {
4426                                                 opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
4427                                         };
4428 
4429                                         rpmhpd_opp_nom: opp-256 {
4430                                                 opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
4431                                         };
4432 
4433                                         rpmhpd_opp_nom_l1: opp-320 {
4434                                                 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
4435                                         };
4436 
4437                                         rpmhpd_opp_nom_l2: opp-336 {
4438                                                 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
4439                                         };
4440 
4441                                         rpmhpd_opp_turbo: opp-384 {
4442                                                 opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
4443                                         };
4444 
4445                                         rpmhpd_opp_turbo_l1: opp-416 {
4446                                                 opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
4447                                         };
4448                                 };
4449                         };
4450                 };
4451 
4452                 cpufreq_hw: cpufreq@17d91000 {
4453                         compatible = "qcom,sm8550-cpufreq-epss", "qcom,cpufreq-epss";
4454                         reg = <0 0x17d91000 0 0x1000>,
4455                               <0 0x17d92000 0 0x1000>,
4456                               <0 0x17d93000 0 0x1000>;
4457                         reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
4458                         clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
4459                         clock-names = "xo", "alternate";
4460                         interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
4461                                      <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
4462                                      <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
4463                         interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
4464                         #freq-domain-cells = <1>;
4465                         #clock-cells = <1>;
4466                 };
4467 
4468                 pmu@24091000 {
4469                         compatible = "qcom,sm8550-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
4470                         reg = <0 0x24091000 0 0x1000>;
4471                         interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
4472                         interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>;
4473 
4474                         operating-points-v2 = <&llcc_bwmon_opp_table>;
4475 
4476                         llcc_bwmon_opp_table: opp-table {
4477                                 compatible = "operating-points-v2";
4478 
4479                                 opp-0 {
4480                                         opp-peak-kBps = <2086000>;
4481                                 };
4482 
4483                                 opp-1 {
4484                                         opp-peak-kBps = <2929000>;
4485                                 };
4486 
4487                                 opp-2 {
4488                                         opp-peak-kBps = <5931000>;
4489                                 };
4490 
4491                                 opp-3 {
4492                                         opp-peak-kBps = <6515000>;
4493                                 };
4494 
4495                                 opp-4 {
4496                                         opp-peak-kBps = <7980000>;
4497                                 };
4498 
4499                                 opp-5 {
4500                                         opp-peak-kBps = <10437000>;
4501                                 };
4502 
4503                                 opp-6 {
4504                                         opp-peak-kBps = <12157000>;
4505                                 };
4506 
4507                                 opp-7 {
4508                                         opp-peak-kBps = <14060000>;
4509                                 };
4510 
4511                                 opp-8 {
4512                                         opp-peak-kBps = <16113000>;
4513                                 };
4514                         };
4515                 };
4516 
4517                 pmu@240b6400 {
4518                         compatible = "qcom,sm8550-cpu-bwmon", "qcom,sdm845-bwmon";
4519                         reg = <0 0x240b6400 0 0x600>;
4520                         interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
4521                         interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>;
4522 
4523                         operating-points-v2 = <&cpu_bwmon_opp_table>;
4524 
4525                         cpu_bwmon_opp_table: opp-table {
4526                                 compatible = "operating-points-v2";
4527 
4528                                 opp-0 {
4529                                         opp-peak-kBps = <4577000>;
4530                                 };
4531 
4532                                 opp-1 {
4533                                         opp-peak-kBps = <7110000>;
4534                                 };
4535 
4536                                 opp-2 {
4537                                         opp-peak-kBps = <9155000>;
4538                                 };
4539 
4540                                 opp-3 {
4541                                         opp-peak-kBps = <12298000>;
4542                                 };
4543 
4544                                 opp-4 {
4545                                         opp-peak-kBps = <14236000>;
4546                                 };
4547 
4548                                 opp-5 {
4549                                         opp-peak-kBps = <16265000>;
4550                                 };
4551                         };
4552                 };
4553 
4554                 gem_noc: interconnect@24100000 {
4555                         compatible = "qcom,sm8550-gem-noc";
4556                         reg = <0 0x24100000 0 0xbb800>;
4557                         #interconnect-cells = <2>;
4558                         qcom,bcm-voters = <&apps_bcm_voter>;
4559                 };
4560 
4561                 system-cache-controller@25000000 {
4562                         compatible = "qcom,sm8550-llcc";
4563                         reg = <0 0x25000000 0 0x200000>,
4564                               <0 0x25200000 0 0x200000>,
4565                               <0 0x25400000 0 0x200000>,
4566                               <0 0x25600000 0 0x200000>,
4567                               <0 0x25800000 0 0x200000>,
4568                               <0 0x25a00000 0 0x200000>;
4569                         reg-names = "llcc0_base",
4570                                     "llcc1_base",
4571                                     "llcc2_base",
4572                                     "llcc3_base",
4573                                     "llcc_broadcast_base",
4574                                     "llcc_broadcast_and_base";
4575                         interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
4576                 };
4577 
4578                 remoteproc_adsp: remoteproc@30000000 {
4579                         compatible = "qcom,sm8550-adsp-pas";
4580                         reg = <0x0 0x30000000 0x0 0x100>;
4581 
4582                         interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
4583                                               <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
4584                                               <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
4585                                               <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
4586                                               <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
4587                         interrupt-names = "wdog", "fatal", "ready",
4588                                           "handover", "stop-ack";
4589 
4590                         clocks = <&rpmhcc RPMH_CXO_CLK>;
4591                         clock-names = "xo";
4592 
4593                         power-domains = <&rpmhpd RPMHPD_LCX>,
4594                                         <&rpmhpd RPMHPD_LMX>;
4595                         power-domain-names = "lcx", "lmx";
4596 
4597                         interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
4598 
4599                         memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
4600 
4601                         qcom,qmp = <&aoss_qmp>;
4602 
4603                         qcom,smem-states = <&smp2p_adsp_out 0>;
4604                         qcom,smem-state-names = "stop";
4605 
4606                         status = "disabled";
4607 
4608                         remoteproc_adsp_glink: glink-edge {
4609                                 interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
4610                                                              IPCC_MPROC_SIGNAL_GLINK_QMP
4611                                                              IRQ_TYPE_EDGE_RISING>;
4612                                 mboxes = <&ipcc IPCC_CLIENT_LPASS
4613                                                 IPCC_MPROC_SIGNAL_GLINK_QMP>;
4614 
4615                                 label = "lpass";
4616                                 qcom,remote-pid = <2>;
4617 
4618                                 fastrpc {
4619                                         compatible = "qcom,fastrpc";
4620                                         qcom,glink-channels = "fastrpcglink-apps-dsp";
4621                                         label = "adsp";
4622                                         qcom,non-secure-domain;
4623                                         #address-cells = <1>;
4624                                         #size-cells = <0>;
4625 
4626                                         compute-cb@3 {
4627                                                 compatible = "qcom,fastrpc-compute-cb";
4628                                                 reg = <3>;
4629                                                 iommus = <&apps_smmu 0x1003 0x80>,
4630                                                          <&apps_smmu 0x1063 0x0>;
4631                                                 dma-coherent;
4632                                         };
4633 
4634                                         compute-cb@4 {
4635                                                 compatible = "qcom,fastrpc-compute-cb";
4636                                                 reg = <4>;
4637                                                 iommus = <&apps_smmu 0x1004 0x80>,
4638                                                          <&apps_smmu 0x1064 0x0>;
4639                                                 dma-coherent;
4640                                         };
4641 
4642                                         compute-cb@5 {
4643                                                 compatible = "qcom,fastrpc-compute-cb";
4644                                                 reg = <5>;
4645                                                 iommus = <&apps_smmu 0x1005 0x80>,
4646                                                          <&apps_smmu 0x1065 0x0>;
4647                                                 dma-coherent;
4648                                         };
4649 
4650                                         compute-cb@6 {
4651                                                 compatible = "qcom,fastrpc-compute-cb";
4652                                                 reg = <6>;
4653                                                 iommus = <&apps_smmu 0x1006 0x80>,
4654                                                          <&apps_smmu 0x1066 0x0>;
4655                                                 dma-coherent;
4656                                         };
4657 
4658                                         compute-cb@7 {
4659                                                 compatible = "qcom,fastrpc-compute-cb";
4660                                                 reg = <7>;
4661                                                 iommus = <&apps_smmu 0x1007 0x80>,
4662                                                          <&apps_smmu 0x1067 0x0>;
4663                                                 dma-coherent;
4664                                         };
4665                                 };
4666 
4667                                 gpr {
4668                                         compatible = "qcom,gpr";
4669                                         qcom,glink-channels = "adsp_apps";
4670                                         qcom,domain = <GPR_DOMAIN_ID_ADSP>;
4671                                         qcom,intents = <512 20>;
4672                                         #address-cells = <1>;
4673                                         #size-cells = <0>;
4674 
4675                                         q6apm: service@1 {
4676                                                 compatible = "qcom,q6apm";
4677                                                 reg = <GPR_APM_MODULE_IID>;
4678                                                 #sound-dai-cells = <0>;
4679                                                 qcom,protection-domain = "avs/audio",
4680                                                                          "msm/adsp/audio_pd";
4681 
4682                                                 q6apmdai: dais {
4683                                                         compatible = "qcom,q6apm-dais";
4684                                                         iommus = <&apps_smmu 0x1001 0x80>,
4685                                                                  <&apps_smmu 0x1061 0x0>;
4686                                                 };
4687 
4688                                                 q6apmbedai: bedais {
4689                                                         compatible = "qcom,q6apm-lpass-dais";
4690                                                         #sound-dai-cells = <1>;
4691                                                 };
4692                                         };
4693 
4694                                         q6prm: service@2 {
4695                                                 compatible = "qcom,q6prm";
4696                                                 reg = <GPR_PRM_MODULE_IID>;
4697                                                 qcom,protection-domain = "avs/audio",
4698                                                                          "msm/adsp/audio_pd";
4699 
4700                                                 q6prmcc: clock-controller {
4701                                                         compatible = "qcom,q6prm-lpass-clocks";
4702                                                         #clock-cells = <2>;
4703                                                 };
4704                                         };
4705                                 };
4706                         };
4707                 };
4708 
4709                 nsp_noc: interconnect@320c0000 {
4710                         compatible = "qcom,sm8550-nsp-noc";
4711                         reg = <0 0x320c0000 0 0xe080>;
4712                         #interconnect-cells = <2>;
4713                         qcom,bcm-voters = <&apps_bcm_voter>;
4714                 };
4715 
4716                 remoteproc_cdsp: remoteproc@32300000 {
4717                         compatible = "qcom,sm8550-cdsp-pas";
4718                         reg = <0x0 0x32300000 0x0 0x1400000>;
4719 
4720                         interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
4721                                               <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
4722                                               <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
4723                                               <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
4724                                               <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
4725                         interrupt-names = "wdog", "fatal", "ready",
4726                                           "handover", "stop-ack";
4727 
4728                         clocks = <&rpmhcc RPMH_CXO_CLK>;
4729                         clock-names = "xo";
4730 
4731                         power-domains = <&rpmhpd RPMHPD_CX>,
4732                                         <&rpmhpd RPMHPD_MXC>,
4733                                         <&rpmhpd RPMHPD_NSP>;
4734                         power-domain-names = "cx", "mxc", "nsp";
4735 
4736                         interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
4737 
4738                         memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>;
4739 
4740                         qcom,qmp = <&aoss_qmp>;
4741 
4742                         qcom,smem-states = <&smp2p_cdsp_out 0>;
4743                         qcom,smem-state-names = "stop";
4744 
4745                         status = "disabled";
4746 
4747                         glink-edge {
4748                                 interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
4749                                                              IPCC_MPROC_SIGNAL_GLINK_QMP
4750                                                              IRQ_TYPE_EDGE_RISING>;
4751                                 mboxes = <&ipcc IPCC_CLIENT_CDSP
4752                                                 IPCC_MPROC_SIGNAL_GLINK_QMP>;
4753 
4754                                 label = "cdsp";
4755                                 qcom,remote-pid = <5>;
4756 
4757                                 fastrpc {
4758                                         compatible = "qcom,fastrpc";
4759                                         qcom,glink-channels = "fastrpcglink-apps-dsp";
4760                                         label = "cdsp";
4761                                         qcom,non-secure-domain;
4762                                         #address-cells = <1>;
4763                                         #size-cells = <0>;
4764 
4765                                         compute-cb@1 {
4766                                                 compatible = "qcom,fastrpc-compute-cb";
4767                                                 reg = <1>;
4768                                                 iommus = <&apps_smmu 0x1961 0x0>,
4769                                                          <&apps_smmu 0x0c01 0x20>,
4770                                                          <&apps_smmu 0x19c1 0x10>;
4771                                                 dma-coherent;
4772                                         };
4773 
4774                                         compute-cb@2 {
4775                                                 compatible = "qcom,fastrpc-compute-cb";
4776                                                 reg = <2>;
4777                                                 iommus = <&apps_smmu 0x1962 0x0>,
4778                                                          <&apps_smmu 0x0c02 0x20>,
4779                                                          <&apps_smmu 0x19c2 0x10>;
4780                                                 dma-coherent;
4781                                         };
4782 
4783                                         compute-cb@3 {
4784                                                 compatible = "qcom,fastrpc-compute-cb";
4785                                                 reg = <3>;
4786                                                 iommus = <&apps_smmu 0x1963 0x0>,
4787                                                          <&apps_smmu 0x0c03 0x20>,
4788                                                          <&apps_smmu 0x19c3 0x10>;
4789                                                 dma-coherent;
4790                                         };
4791 
4792                                         compute-cb@4 {
4793                                                 compatible = "qcom,fastrpc-compute-cb";
4794                                                 reg = <4>;
4795                                                 iommus = <&apps_smmu 0x1964 0x0>,
4796                                                          <&apps_smmu 0x0c04 0x20>,
4797                                                          <&apps_smmu 0x19c4 0x10>;
4798                                                 dma-coherent;
4799                                         };
4800 
4801                                         compute-cb@5 {
4802                                                 compatible = "qcom,fastrpc-compute-cb";
4803                                                 reg = <5>;
4804                                                 iommus = <&apps_smmu 0x1965 0x0>,
4805                                                          <&apps_smmu 0x0c05 0x20>,
4806                                                          <&apps_smmu 0x19c5 0x10>;
4807                                                 dma-coherent;
4808                                         };
4809 
4810                                         compute-cb@6 {
4811                                                 compatible = "qcom,fastrpc-compute-cb";
4812                                                 reg = <6>;
4813                                                 iommus = <&apps_smmu 0x1966 0x0>,
4814                                                          <&apps_smmu 0x0c06 0x20>,
4815                                                          <&apps_smmu 0x19c6 0x10>;
4816                                                 dma-coherent;
4817                                         };
4818 
4819                                         compute-cb@7 {
4820                                                 compatible = "qcom,fastrpc-compute-cb";
4821                                                 reg = <7>;
4822                                                 iommus = <&apps_smmu 0x1967 0x0>,
4823                                                          <&apps_smmu 0x0c07 0x20>,
4824                                                          <&apps_smmu 0x19c7 0x10>;
4825                                                 dma-coherent;
4826                                         };
4827 
4828                                         compute-cb@8 {
4829                                                 compatible = "qcom,fastrpc-compute-cb";
4830                                                 reg = <8>;
4831                                                 iommus = <&apps_smmu 0x1968 0x0>,
4832                                                          <&apps_smmu 0x0c08 0x20>,
4833                                                          <&apps_smmu 0x19c8 0x10>;
4834                                                 dma-coherent;
4835                                         };
4836 
4837                                         /* note: secure cb9 in downstream */
4838                                 };
4839                         };
4840                 };
4841         };
4842 
4843         thermal-zones {
4844                 aoss0-thermal {
4845                         thermal-sensors = <&tsens0 0>;
4846 
4847                         trips {
4848                                 thermal-engine-config {
4849                                         temperature = <125000>;
4850                                         hysteresis = <1000>;
4851                                         type = "passive";
4852                                 };
4853 
4854                                 reset-mon-config {
4855                                         temperature = <115000>;
4856                                         hysteresis = <5000>;
4857                                         type = "passive";
4858                                 };
4859                         };
4860                 };
4861 
4862                 cpuss0-thermal {
4863                         thermal-sensors = <&tsens0 1>;
4864 
4865                         trips {
4866                                 thermal-engine-config {
4867                                         temperature = <125000>;
4868                                         hysteresis = <1000>;
4869                                         type = "passive";
4870                                 };
4871 
4872                                 reset-mon-config {
4873                                         temperature = <115000>;
4874                                         hysteresis = <5000>;
4875                                         type = "passive";
4876                                 };
4877                         };
4878                 };
4879 
4880                 cpuss1-thermal {
4881                         thermal-sensors = <&tsens0 2>;
4882 
4883                         trips {
4884                                 thermal-engine-config {
4885                                         temperature = <125000>;
4886                                         hysteresis = <1000>;
4887                                         type = "passive";
4888                                 };
4889 
4890                                 reset-mon-config {
4891                                         temperature = <115000>;
4892                                         hysteresis = <5000>;
4893                                         type = "passive";
4894                                 };
4895                         };
4896                 };
4897 
4898                 cpuss2-thermal {
4899                         thermal-sensors = <&tsens0 3>;
4900 
4901                         trips {
4902                                 thermal-engine-config {
4903                                         temperature = <125000>;
4904                                         hysteresis = <1000>;
4905                                         type = "passive";
4906                                 };
4907 
4908                                 reset-mon-config {
4909                                         temperature = <115000>;
4910                                         hysteresis = <5000>;
4911                                         type = "passive";
4912                                 };
4913                         };
4914                 };
4915 
4916                 cpuss3-thermal {
4917                         thermal-sensors = <&tsens0 4>;
4918 
4919                         trips {
4920                                 thermal-engine-config {
4921                                         temperature = <125000>;
4922                                         hysteresis = <1000>;
4923                                         type = "passive";
4924                                 };
4925 
4926                                 reset-mon-config {
4927                                         temperature = <115000>;
4928                                         hysteresis = <5000>;
4929                                         type = "passive";
4930                                 };
4931                         };
4932                 };
4933 
4934                 cpu3-top-thermal {
4935                         thermal-sensors = <&tsens0 5>;
4936 
4937                         trips {
4938                                 cpu3_top_alert0: trip-point0 {
4939                                         temperature = <90000>;
4940                                         hysteresis = <2000>;
4941                                         type = "passive";
4942                                 };
4943 
4944                                 cpu3_top_alert1: trip-point1 {
4945                                         temperature = <95000>;
4946                                         hysteresis = <2000>;
4947                                         type = "passive";
4948                                 };
4949 
4950                                 cpu3_top_crit: cpu-critical {
4951                                         temperature = <110000>;
4952                                         hysteresis = <1000>;
4953                                         type = "critical";
4954                                 };
4955                         };
4956                 };
4957 
4958                 cpu3-bottom-thermal {
4959                         thermal-sensors = <&tsens0 6>;
4960 
4961                         trips {
4962                                 cpu3_bottom_alert0: trip-point0 {
4963                                         temperature = <90000>;
4964                                         hysteresis = <2000>;
4965                                         type = "passive";
4966                                 };
4967 
4968                                 cpu3_bottom_alert1: trip-point1 {
4969                                         temperature = <95000>;
4970                                         hysteresis = <2000>;
4971                                         type = "passive";
4972                                 };
4973 
4974                                 cpu3_bottom_crit: cpu-critical {
4975                                         temperature = <110000>;
4976                                         hysteresis = <1000>;
4977                                         type = "critical";
4978                                 };
4979                         };
4980                 };
4981 
4982                 cpu4-top-thermal {
4983                         thermal-sensors = <&tsens0 7>;
4984 
4985                         trips {
4986                                 cpu4_top_alert0: trip-point0 {
4987                                         temperature = <90000>;
4988                                         hysteresis = <2000>;
4989                                         type = "passive";
4990                                 };
4991 
4992                                 cpu4_top_alert1: trip-point1 {
4993                                         temperature = <95000>;
4994                                         hysteresis = <2000>;
4995                                         type = "passive";
4996                                 };
4997 
4998                                 cpu4_top_crit: cpu-critical {
4999                                         temperature = <110000>;
5000                                         hysteresis = <1000>;
5001                                         type = "critical";
5002                                 };
5003                         };
5004                 };
5005 
5006                 cpu4-bottom-thermal {
5007                         thermal-sensors = <&tsens0 8>;
5008 
5009                         trips {
5010                                 cpu4_bottom_alert0: trip-point0 {
5011                                         temperature = <90000>;
5012                                         hysteresis = <2000>;
5013                                         type = "passive";
5014                                 };
5015 
5016                                 cpu4_bottom_alert1: trip-point1 {
5017                                         temperature = <95000>;
5018                                         hysteresis = <2000>;
5019                                         type = "passive";
5020                                 };
5021 
5022                                 cpu4_bottom_crit: cpu-critical {
5023                                         temperature = <110000>;
5024                                         hysteresis = <1000>;
5025                                         type = "critical";
5026                                 };
5027                         };
5028                 };
5029 
5030                 cpu5-top-thermal {
5031                         thermal-sensors = <&tsens0 9>;
5032 
5033                         trips {
5034                                 cpu5_top_alert0: trip-point0 {
5035                                         temperature = <90000>;
5036                                         hysteresis = <2000>;
5037                                         type = "passive";
5038                                 };
5039 
5040                                 cpu5_top_alert1: trip-point1 {
5041                                         temperature = <95000>;
5042                                         hysteresis = <2000>;
5043                                         type = "passive";
5044                                 };
5045 
5046                                 cpu5_top_crit: cpu-critical {
5047                                         temperature = <110000>;
5048                                         hysteresis = <1000>;
5049                                         type = "critical";
5050                                 };
5051                         };
5052                 };
5053 
5054                 cpu5-bottom-thermal {
5055                         thermal-sensors = <&tsens0 10>;
5056 
5057                         trips {
5058                                 cpu5_bottom_alert0: trip-point0 {
5059                                         temperature = <90000>;
5060                                         hysteresis = <2000>;
5061                                         type = "passive";
5062                                 };
5063 
5064                                 cpu5_bottom_alert1: trip-point1 {
5065                                         temperature = <95000>;
5066                                         hysteresis = <2000>;
5067                                         type = "passive";
5068                                 };
5069 
5070                                 cpu5_bottom_crit: cpu-critical {
5071                                         temperature = <110000>;
5072                                         hysteresis = <1000>;
5073                                         type = "critical";
5074                                 };
5075                         };
5076                 };
5077 
5078                 cpu6-top-thermal {
5079                         thermal-sensors = <&tsens0 11>;
5080 
5081                         trips {
5082                                 cpu6_top_alert0: trip-point0 {
5083                                         temperature = <90000>;
5084                                         hysteresis = <2000>;
5085                                         type = "passive";
5086                                 };
5087 
5088                                 cpu6_top_alert1: trip-point1 {
5089                                         temperature = <95000>;
5090                                         hysteresis = <2000>;
5091                                         type = "passive";
5092                                 };
5093 
5094                                 cpu6_top_crit: cpu-critical {
5095                                         temperature = <110000>;
5096                                         hysteresis = <1000>;
5097                                         type = "critical";
5098                                 };
5099                         };
5100                 };
5101 
5102                 cpu6-bottom-thermal {
5103                         thermal-sensors = <&tsens0 12>;
5104 
5105                         trips {
5106                                 cpu6_bottom_alert0: trip-point0 {
5107                                         temperature = <90000>;
5108                                         hysteresis = <2000>;
5109                                         type = "passive";
5110                                 };
5111 
5112                                 cpu6_bottom_alert1: trip-point1 {
5113                                         temperature = <95000>;
5114                                         hysteresis = <2000>;
5115                                         type = "passive";
5116                                 };
5117 
5118                                 cpu6_bottom_crit: cpu-critical {
5119                                         temperature = <110000>;
5120                                         hysteresis = <1000>;
5121                                         type = "critical";
5122                                 };
5123                         };
5124                 };
5125 
5126                 cpu7-top-thermal {
5127                         thermal-sensors = <&tsens0 13>;
5128 
5129                         trips {
5130                                 cpu7_top_alert0: trip-point0 {
5131                                         temperature = <90000>;
5132                                         hysteresis = <2000>;
5133                                         type = "passive";
5134                                 };
5135 
5136                                 cpu7_top_alert1: trip-point1 {
5137                                         temperature = <95000>;
5138                                         hysteresis = <2000>;
5139                                         type = "passive";
5140                                 };
5141 
5142                                 cpu7_top_crit: cpu-critical {
5143                                         temperature = <110000>;
5144                                         hysteresis = <1000>;
5145                                         type = "critical";
5146                                 };
5147                         };
5148                 };
5149 
5150                 cpu7-middle-thermal {
5151                         thermal-sensors = <&tsens0 14>;
5152 
5153                         trips {
5154                                 cpu7_middle_alert0: trip-point0 {
5155                                         temperature = <90000>;
5156                                         hysteresis = <2000>;
5157                                         type = "passive";
5158                                 };
5159 
5160                                 cpu7_middle_alert1: trip-point1 {
5161                                         temperature = <95000>;
5162                                         hysteresis = <2000>;
5163                                         type = "passive";
5164                                 };
5165 
5166                                 cpu7_middle_crit: cpu-critical {
5167                                         temperature = <110000>;
5168                                         hysteresis = <1000>;
5169                                         type = "critical";
5170                                 };
5171                         };
5172                 };
5173 
5174                 cpu7-bottom-thermal {
5175                         thermal-sensors = <&tsens0 15>;
5176 
5177                         trips {
5178                                 cpu7_bottom_alert0: trip-point0 {
5179                                         temperature = <90000>;
5180                                         hysteresis = <2000>;
5181                                         type = "passive";
5182                                 };
5183 
5184                                 cpu7_bottom_alert1: trip-point1 {
5185                                         temperature = <95000>;
5186                                         hysteresis = <2000>;
5187                                         type = "passive";
5188                                 };
5189 
5190                                 cpu7_bottom_crit: cpu-critical {
5191                                         temperature = <110000>;
5192                                         hysteresis = <1000>;
5193                                         type = "critical";
5194                                 };
5195                         };
5196                 };
5197 
5198                 aoss1-thermal {
5199                         thermal-sensors = <&tsens1 0>;
5200 
5201                         trips {
5202                                 thermal-engine-config {
5203                                         temperature = <125000>;
5204                                         hysteresis = <1000>;
5205                                         type = "passive";
5206                                 };
5207 
5208                                 reset-mon-config {
5209                                         temperature = <115000>;
5210                                         hysteresis = <5000>;
5211                                         type = "passive";
5212                                 };
5213                         };
5214                 };
5215 
5216                 cpu0-thermal {
5217                         thermal-sensors = <&tsens1 1>;
5218 
5219                         trips {
5220                                 cpu0_alert0: trip-point0 {
5221                                         temperature = <90000>;
5222                                         hysteresis = <2000>;
5223                                         type = "passive";
5224                                 };
5225 
5226                                 cpu0_alert1: trip-point1 {
5227                                         temperature = <95000>;
5228                                         hysteresis = <2000>;
5229                                         type = "passive";
5230                                 };
5231 
5232                                 cpu0_crit: cpu-critical {
5233                                         temperature = <110000>;
5234                                         hysteresis = <1000>;
5235                                         type = "critical";
5236                                 };
5237                         };
5238                 };
5239 
5240                 cpu1-thermal {
5241                         thermal-sensors = <&tsens1 2>;
5242 
5243                         trips {
5244                                 cpu1_alert0: trip-point0 {
5245                                         temperature = <90000>;
5246                                         hysteresis = <2000>;
5247                                         type = "passive";
5248                                 };
5249 
5250                                 cpu1_alert1: trip-point1 {
5251                                         temperature = <95000>;
5252                                         hysteresis = <2000>;
5253                                         type = "passive";
5254                                 };
5255 
5256                                 cpu1_crit: cpu-critical {
5257                                         temperature = <110000>;
5258                                         hysteresis = <1000>;
5259                                         type = "critical";
5260                                 };
5261                         };
5262                 };
5263 
5264                 cpu2-thermal {
5265                         thermal-sensors = <&tsens1 3>;
5266 
5267                         trips {
5268                                 cpu2_alert0: trip-point0 {
5269                                         temperature = <90000>;
5270                                         hysteresis = <2000>;
5271                                         type = "passive";
5272                                 };
5273 
5274                                 cpu2_alert1: trip-point1 {
5275                                         temperature = <95000>;
5276                                         hysteresis = <2000>;
5277                                         type = "passive";
5278                                 };
5279 
5280                                 cpu2_crit: cpu-critical {
5281                                         temperature = <110000>;
5282                                         hysteresis = <1000>;
5283                                         type = "critical";
5284                                 };
5285                         };
5286                 };
5287 
5288                 cdsp0-thermal {
5289                         polling-delay-passive = <10>;
5290 
5291                         thermal-sensors = <&tsens2 4>;
5292 
5293                         trips {
5294                                 thermal-engine-config {
5295                                         temperature = <125000>;
5296                                         hysteresis = <1000>;
5297                                         type = "passive";
5298                                 };
5299 
5300                                 thermal-hal-config {
5301                                         temperature = <125000>;
5302                                         hysteresis = <1000>;
5303                                         type = "passive";
5304                                 };
5305 
5306                                 reset-mon-config {
5307                                         temperature = <115000>;
5308                                         hysteresis = <5000>;
5309                                         type = "passive";
5310                                 };
5311 
5312                                 cdsp0_junction_config: junction-config {
5313                                         temperature = <95000>;
5314                                         hysteresis = <5000>;
5315                                         type = "passive";
5316                                 };
5317                         };
5318                 };
5319 
5320                 cdsp1-thermal {
5321                         polling-delay-passive = <10>;
5322 
5323                         thermal-sensors = <&tsens2 5>;
5324 
5325                         trips {
5326                                 thermal-engine-config {
5327                                         temperature = <125000>;
5328                                         hysteresis = <1000>;
5329                                         type = "passive";
5330                                 };
5331 
5332                                 thermal-hal-config {
5333                                         temperature = <125000>;
5334                                         hysteresis = <1000>;
5335                                         type = "passive";
5336                                 };
5337 
5338                                 reset-mon-config {
5339                                         temperature = <115000>;
5340                                         hysteresis = <5000>;
5341                                         type = "passive";
5342                                 };
5343 
5344                                 cdsp1_junction_config: junction-config {
5345                                         temperature = <95000>;
5346                                         hysteresis = <5000>;
5347                                         type = "passive";
5348                                 };
5349                         };
5350                 };
5351 
5352                 cdsp2-thermal {
5353                         polling-delay-passive = <10>;
5354 
5355                         thermal-sensors = <&tsens2 6>;
5356 
5357                         trips {
5358                                 thermal-engine-config {
5359                                         temperature = <125000>;
5360                                         hysteresis = <1000>;
5361                                         type = "passive";
5362                                 };
5363 
5364                                 thermal-hal-config {
5365                                         temperature = <125000>;
5366                                         hysteresis = <1000>;
5367                                         type = "passive";
5368                                 };
5369 
5370                                 reset-mon-config {
5371                                         temperature = <115000>;
5372                                         hysteresis = <5000>;
5373                                         type = "passive";
5374                                 };
5375 
5376                                 cdsp2_junction_config: junction-config {
5377                                         temperature = <95000>;
5378                                         hysteresis = <5000>;
5379                                         type = "passive";
5380                                 };
5381                         };
5382                 };
5383 
5384                 cdsp3-thermal {
5385                         polling-delay-passive = <10>;
5386 
5387                         thermal-sensors = <&tsens2 7>;
5388 
5389                         trips {
5390                                 thermal-engine-config {
5391                                         temperature = <125000>;
5392                                         hysteresis = <1000>;
5393                                         type = "passive";
5394                                 };
5395 
5396                                 thermal-hal-config {
5397                                         temperature = <125000>;
5398                                         hysteresis = <1000>;
5399                                         type = "passive";
5400                                 };
5401 
5402                                 reset-mon-config {
5403                                         temperature = <115000>;
5404                                         hysteresis = <5000>;
5405                                         type = "passive";
5406                                 };
5407 
5408                                 cdsp3_junction_config: junction-config {
5409                                         temperature = <95000>;
5410                                         hysteresis = <5000>;
5411                                         type = "passive";
5412                                 };
5413                         };
5414                 };
5415 
5416                 video-thermal {
5417                         thermal-sensors = <&tsens1 8>;
5418 
5419                         trips {
5420                                 thermal-engine-config {
5421                                         temperature = <125000>;
5422                                         hysteresis = <1000>;
5423                                         type = "passive";
5424                                 };
5425 
5426                                 reset-mon-config {
5427                                         temperature = <115000>;
5428                                         hysteresis = <5000>;
5429                                         type = "passive";
5430                                 };
5431                         };
5432                 };
5433 
5434                 mem-thermal {
5435                         polling-delay-passive = <10>;
5436 
5437                         thermal-sensors = <&tsens1 9>;
5438 
5439                         trips {
5440                                 thermal-engine-config {
5441                                         temperature = <125000>;
5442                                         hysteresis = <1000>;
5443                                         type = "passive";
5444                                 };
5445 
5446                                 ddr_config0: ddr0-config {
5447                                         temperature = <90000>;
5448                                         hysteresis = <5000>;
5449                                         type = "passive";
5450                                 };
5451 
5452                                 reset-mon-config {
5453                                         temperature = <115000>;
5454                                         hysteresis = <5000>;
5455                                         type = "passive";
5456                                 };
5457                         };
5458                 };
5459 
5460                 modem0-thermal {
5461                         thermal-sensors = <&tsens1 10>;
5462 
5463                         trips {
5464                                 thermal-engine-config {
5465                                         temperature = <125000>;
5466                                         hysteresis = <1000>;
5467                                         type = "passive";
5468                                 };
5469 
5470                                 mdmss0_config0: mdmss0-config0 {
5471                                         temperature = <102000>;
5472                                         hysteresis = <3000>;
5473                                         type = "passive";
5474                                 };
5475 
5476                                 mdmss0_config1: mdmss0-config1 {
5477                                         temperature = <105000>;
5478                                         hysteresis = <3000>;
5479                                         type = "passive";
5480                                 };
5481 
5482                                 reset-mon-config {
5483                                         temperature = <115000>;
5484                                         hysteresis = <5000>;
5485                                         type = "passive";
5486                                 };
5487                         };
5488                 };
5489 
5490                 modem1-thermal {
5491                         thermal-sensors = <&tsens1 11>;
5492 
5493                         trips {
5494                                 thermal-engine-config {
5495                                         temperature = <125000>;
5496                                         hysteresis = <1000>;
5497                                         type = "passive";
5498                                 };
5499 
5500                                 mdmss1_config0: mdmss1-config0 {
5501                                         temperature = <102000>;
5502                                         hysteresis = <3000>;
5503                                         type = "passive";
5504                                 };
5505 
5506                                 mdmss1_config1: mdmss1-config1 {
5507                                         temperature = <105000>;
5508                                         hysteresis = <3000>;
5509                                         type = "passive";
5510                                 };
5511 
5512                                 reset-mon-config {
5513                                         temperature = <115000>;
5514                                         hysteresis = <5000>;
5515                                         type = "passive";
5516                                 };
5517                         };
5518                 };
5519 
5520                 modem2-thermal {
5521                         thermal-sensors = <&tsens1 12>;
5522 
5523                         trips {
5524                                 thermal-engine-config {
5525                                         temperature = <125000>;
5526                                         hysteresis = <1000>;
5527                                         type = "passive";
5528                                 };
5529 
5530                                 mdmss2_config0: mdmss2-config0 {
5531                                         temperature = <102000>;
5532                                         hysteresis = <3000>;
5533                                         type = "passive";
5534                                 };
5535 
5536                                 mdmss2_config1: mdmss2-config1 {
5537                                         temperature = <105000>;
5538                                         hysteresis = <3000>;
5539                                         type = "passive";
5540                                 };
5541 
5542                                 reset-mon-config {
5543                                         temperature = <115000>;
5544                                         hysteresis = <5000>;
5545                                         type = "passive";
5546                                 };
5547                         };
5548                 };
5549 
5550                 modem3-thermal {
5551                         thermal-sensors = <&tsens1 13>;
5552 
5553                         trips {
5554                                 thermal-engine-config {
5555                                         temperature = <125000>;
5556                                         hysteresis = <1000>;
5557                                         type = "passive";
5558                                 };
5559 
5560                                 mdmss3_config0: mdmss3-config0 {
5561                                         temperature = <102000>;
5562                                         hysteresis = <3000>;
5563                                         type = "passive";
5564                                 };
5565 
5566                                 mdmss3_config1: mdmss3-config1 {
5567                                         temperature = <105000>;
5568                                         hysteresis = <3000>;
5569                                         type = "passive";
5570                                 };
5571 
5572                                 reset-mon-config {
5573                                         temperature = <115000>;
5574                                         hysteresis = <5000>;
5575                                         type = "passive";
5576                                 };
5577                         };
5578                 };
5579 
5580                 camera0-thermal {
5581                         thermal-sensors = <&tsens1 14>;
5582 
5583                         trips {
5584                                 thermal-engine-config {
5585                                         temperature = <125000>;
5586                                         hysteresis = <1000>;
5587                                         type = "passive";
5588                                 };
5589 
5590                                 reset-mon-config {
5591                                         temperature = <115000>;
5592                                         hysteresis = <5000>;
5593                                         type = "passive";
5594                                 };
5595                         };
5596                 };
5597 
5598                 camera1-thermal {
5599                         thermal-sensors = <&tsens1 15>;
5600 
5601                         trips {
5602                                 thermal-engine-config {
5603                                         temperature = <125000>;
5604                                         hysteresis = <1000>;
5605                                         type = "passive";
5606                                 };
5607 
5608                                 reset-mon-config {
5609                                         temperature = <115000>;
5610                                         hysteresis = <5000>;
5611                                         type = "passive";
5612                                 };
5613                         };
5614                 };
5615 
5616                 aoss2-thermal {
5617                         thermal-sensors = <&tsens2 0>;
5618 
5619                         trips {
5620                                 thermal-engine-config {
5621                                         temperature = <125000>;
5622                                         hysteresis = <1000>;
5623                                         type = "passive";
5624                                 };
5625 
5626                                 reset-mon-config {
5627                                         temperature = <115000>;
5628                                         hysteresis = <5000>;
5629                                         type = "passive";
5630                                 };
5631                         };
5632                 };
5633 
5634                 gpuss-0-thermal {
5635                         polling-delay-passive = <10>;
5636 
5637                         thermal-sensors = <&tsens2 1>;
5638 
5639                         cooling-maps {
5640                                 map0 {
5641                                         trip = <&gpu0_alert0>;
5642                                         cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5643                                 };
5644                         };
5645 
5646                         trips {
5647                                 gpu0_alert0: trip-point0 {
5648                                         temperature = <85000>;
5649                                         hysteresis = <1000>;
5650                                         type = "passive";
5651                                 };
5652 
5653                                 trip-point1 {
5654                                         temperature = <90000>;
5655                                         hysteresis = <1000>;
5656                                         type = "hot";
5657                                 };
5658 
5659                                 trip-point2 {
5660                                         temperature = <110000>;
5661                                         hysteresis = <1000>;
5662                                         type = "critical";
5663                                 };
5664                         };
5665                 };
5666 
5667                 gpuss-1-thermal {
5668                         polling-delay-passive = <10>;
5669 
5670                         thermal-sensors = <&tsens2 2>;
5671 
5672                         cooling-maps {
5673                                 map0 {
5674                                         trip = <&gpu1_alert0>;
5675                                         cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5676                                 };
5677                         };
5678 
5679                         trips {
5680                                 gpu1_alert0: trip-point0 {
5681                                         temperature = <85000>;
5682                                         hysteresis = <1000>;
5683                                         type = "passive";
5684                                 };
5685 
5686                                 trip-point1 {
5687                                         temperature = <90000>;
5688                                         hysteresis = <1000>;
5689                                         type = "hot";
5690                                 };
5691 
5692                                 trip-point2 {
5693                                         temperature = <110000>;
5694                                         hysteresis = <1000>;
5695                                         type = "critical";
5696                                 };
5697                         };
5698                 };
5699 
5700                 gpuss-2-thermal {
5701                         polling-delay-passive = <10>;
5702 
5703                         thermal-sensors = <&tsens2 3>;
5704 
5705                         cooling-maps {
5706                                 map0 {
5707                                         trip = <&gpu2_alert0>;
5708                                         cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5709                                 };
5710                         };
5711 
5712                         trips {
5713                                 gpu2_alert0: trip-point0 {
5714                                         temperature = <85000>;
5715                                         hysteresis = <1000>;
5716                                         type = "passive";
5717                                 };
5718 
5719                                 trip-point1 {
5720                                         temperature = <90000>;
5721                                         hysteresis = <1000>;
5722                                         type = "hot";
5723                                 };
5724 
5725                                 trip-point2 {
5726                                         temperature = <110000>;
5727                                         hysteresis = <1000>;
5728                                         type = "critical";
5729                                 };
5730                         };
5731                 };
5732 
5733                 gpuss-3-thermal {
5734                         polling-delay-passive = <10>;
5735 
5736                         thermal-sensors = <&tsens2 4>;
5737 
5738                         cooling-maps {
5739                                 map0 {
5740                                         trip = <&gpu3_alert0>;
5741                                         cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5742                                 };
5743                         };
5744 
5745                         trips {
5746                                 gpu3_alert0: trip-point0 {
5747                                         temperature = <85000>;
5748                                         hysteresis = <1000>;
5749                                         type = "passive";
5750                                 };
5751 
5752                                 trip-point1 {
5753                                         temperature = <90000>;
5754                                         hysteresis = <1000>;
5755                                         type = "hot";
5756                                 };
5757 
5758                                 trip-point2 {
5759                                         temperature = <110000>;
5760                                         hysteresis = <1000>;
5761                                         type = "critical";
5762                                 };
5763                         };
5764                 };
5765 
5766                 gpuss-4-thermal {
5767                         polling-delay-passive = <10>;
5768 
5769                         thermal-sensors = <&tsens2 5>;
5770 
5771                         cooling-maps {
5772                                 map0 {
5773                                         trip = <&gpu4_alert0>;
5774                                         cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5775                                 };
5776                         };
5777 
5778                         trips {
5779                                 gpu4_alert0: trip-point0 {
5780                                         temperature = <85000>;
5781                                         hysteresis = <1000>;
5782                                         type = "passive";
5783                                 };
5784 
5785                                 trip-point1 {
5786                                         temperature = <90000>;
5787                                         hysteresis = <1000>;
5788                                         type = "hot";
5789                                 };
5790 
5791                                 trip-point2 {
5792                                         temperature = <110000>;
5793                                         hysteresis = <1000>;
5794                                         type = "critical";
5795                                 };
5796                         };
5797                 };
5798 
5799                 gpuss-5-thermal {
5800                         polling-delay-passive = <10>;
5801 
5802                         thermal-sensors = <&tsens2 6>;
5803 
5804                         cooling-maps {
5805                                 map0 {
5806                                         trip = <&gpu5_alert0>;
5807                                         cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5808                                 };
5809                         };
5810 
5811                         trips {
5812                                 gpu5_alert0: trip-point0 {
5813                                         temperature = <85000>;
5814                                         hysteresis = <1000>;
5815                                         type = "passive";
5816                                 };
5817 
5818                                 trip-point1 {
5819                                         temperature = <90000>;
5820                                         hysteresis = <1000>;
5821                                         type = "hot";
5822                                 };
5823 
5824                                 trip-point2 {
5825                                         temperature = <110000>;
5826                                         hysteresis = <1000>;
5827                                         type = "critical";
5828                                 };
5829                         };
5830                 };
5831 
5832                 gpuss-6-thermal {
5833                         polling-delay-passive = <10>;
5834 
5835                         thermal-sensors = <&tsens2 7>;
5836 
5837                         cooling-maps {
5838                                 map0 {
5839                                         trip = <&gpu6_alert0>;
5840                                         cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5841                                 };
5842                         };
5843 
5844                         trips {
5845                                 gpu6_alert0: trip-point0 {
5846                                         temperature = <85000>;
5847                                         hysteresis = <1000>;
5848                                         type = "passive";
5849                                 };
5850 
5851                                 trip-point1 {
5852                                         temperature = <90000>;
5853                                         hysteresis = <1000>;
5854                                         type = "hot";
5855                                 };
5856 
5857                                 trip-point2 {
5858                                         temperature = <110000>;
5859                                         hysteresis = <1000>;
5860                                         type = "critical";
5861                                 };
5862                         };
5863                 };
5864 
5865                 gpuss-7-thermal {
5866                         polling-delay-passive = <10>;
5867 
5868                         thermal-sensors = <&tsens2 8>;
5869 
5870                         cooling-maps {
5871                                 map0 {
5872                                         trip = <&gpu7_alert0>;
5873                                         cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5874                                 };
5875                         };
5876 
5877                         trips {
5878                                 gpu7_alert0: trip-point0 {
5879                                         temperature = <85000>;
5880                                         hysteresis = <1000>;
5881                                         type = "passive";
5882                                 };
5883 
5884                                 trip-point1 {
5885                                         temperature = <90000>;
5886                                         hysteresis = <1000>;
5887                                         type = "hot";
5888                                 };
5889 
5890                                 trip-point2 {
5891                                         temperature = <110000>;
5892                                         hysteresis = <1000>;
5893                                         type = "critical";
5894                                 };
5895                         };
5896                 };
5897         };
5898 
5899         timer {
5900                 compatible = "arm,armv8-timer";
5901                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
5902                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
5903                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
5904                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
5905         };
5906 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php