1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2024, Linaro Limited
4 */
5
6 /dts-v1/;
7
8 #include <dt-bindings/leds/common.h>
9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
10 #include "sm8650.dtsi"
11 #include "pm8010.dtsi"
12 #include "pm8550.dtsi"
13 #include "pm8550b.dtsi"
14 #define PMK8550VE_SID 8
15 #include "pm8550ve.dtsi"
16 #include "pm8550vs.dtsi"
17 #include "pmk8550.dtsi"
18
19 / {
20 model = "Qualcomm Technologies, Inc. SM8650 HDK";
21 compatible = "qcom,sm8650-hdk", "qcom,sm8650";
22 chassis-type = "embedded";
23
24 aliases {
25 serial0 = &uart15;
26 serial1 = &uart14;
27 };
28
29 chosen {
30 stdout-path = "serial0:115200n8";
31 };
32
33 hdmi-out {
34 compatible = "hdmi-connector";
35 type = "a";
36
37 port {
38 hdmi_connector_out: endpoint {
39 remote-endpoint = <<9611_out>;
40 };
41 };
42 };
43
44 gpio-keys {
45 compatible = "gpio-keys";
46
47 pinctrl-0 = <&volume_up_n>;
48 pinctrl-names = "default";
49
50 key-volume-up {
51 label = "Volume Up";
52 linux,code = <KEY_VOLUMEUP>;
53 gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
54 debounce-interval = <15>;
55 linux,can-disable;
56 wakeup-source;
57 };
58 };
59
60 leds {
61 compatible = "gpio-leds";
62
63 led-0 {
64 function = LED_FUNCTION_BLUETOOTH;
65 color = <LED_COLOR_ID_BLUE>;
66 gpios = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
67 linux,default-trigger = "bluetooth-power";
68 default-state = "off";
69 };
70
71 led-1 {
72 function = LED_FUNCTION_INDICATOR;
73 color = <LED_COLOR_ID_GREEN>;
74 gpios = <&pm8550b_gpios 9 GPIO_ACTIVE_HIGH>;
75 default-state = "off";
76 panic-indicator;
77 };
78
79 led-2 {
80 function = LED_FUNCTION_WLAN;
81 color = <LED_COLOR_ID_ORANGE>;
82 gpios = <&pm8550b_gpios 10 GPIO_ACTIVE_HIGH>;
83 linux,default-trigger = "phy0tx";
84 default-state = "off";
85 };
86 };
87
88 pmic-glink {
89 compatible = "qcom,sm8650-pmic-glink",
90 "qcom,sm8550-pmic-glink",
91 "qcom,pmic-glink";
92 #address-cells = <1>;
93 #size-cells = <0>;
94 orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
95
96 connector@0 {
97 compatible = "usb-c-connector";
98 reg = <0>;
99
100 power-role = "dual";
101 data-role = "dual";
102
103 ports {
104 #address-cells = <1>;
105 #size-cells = <0>;
106
107 port@0 {
108 reg = <0>;
109
110 pmic_glink_hs_in: endpoint {
111 remote-endpoint = <&usb_1_dwc3_hs>;
112 };
113 };
114
115 port@1 {
116 reg = <1>;
117
118 pmic_glink_ss_in: endpoint {
119 remote-endpoint = <&usb_dp_qmpphy_out>;
120 };
121 };
122
123 port@2 {
124 reg = <2>;
125
126 pmic_glink_sbu: endpoint {
127 remote-endpoint = <&wcd_usbss_sbu_mux>;
128 };
129 };
130 };
131 };
132 };
133
134 lt9611_1v2: regulator-lt9611-1v2 {
135 compatible = "regulator-fixed";
136
137 regulator-name = "LT9611_1V2";
138 regulator-min-microvolt = <1200000>;
139 regulator-max-microvolt = <1200000>;
140
141 vin-supply = <&vph_pwr>;
142 gpio = <&tlmm 79 GPIO_ACTIVE_HIGH>;
143
144 enable-active-high;
145 };
146
147 lt9611_3v3: regulator-lt9611-3v3 {
148 compatible = "regulator-fixed";
149
150 regulator-name = "LT9611_3V3";
151 regulator-min-microvolt = <3300000>;
152 regulator-max-microvolt = <3300000>;
153
154 vin-supply = <&vreg_bob_3v3>;
155 gpio = <&tlmm 78 GPIO_ACTIVE_HIGH>;
156
157 enable-active-high;
158 };
159
160 sound {
161 compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard";
162 model = "SM8650-HDK";
163 audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
164 "SpkrRight IN", "WSA_SPK2 OUT",
165 "IN1_HPHL", "HPHL_OUT",
166 "IN2_HPHR", "HPHR_OUT",
167 "AMIC1", "MIC BIAS1",
168 "AMIC2", "MIC BIAS2",
169 "AMIC5", "MIC BIAS4",
170 "TX SWR_INPUT0", "ADC1_OUTPUT",
171 "TX SWR_INPUT1", "ADC2_OUTPUT",
172 "TX SWR_INPUT3", "ADC4_OUTPUT";
173
174 wcd-playback-dai-link {
175 link-name = "WCD Playback";
176
177 cpu {
178 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
179 };
180
181 codec {
182 sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
183 };
184
185 platform {
186 sound-dai = <&q6apm>;
187 };
188 };
189
190 wcd-capture-dai-link {
191 link-name = "WCD Capture";
192
193 cpu {
194 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
195 };
196
197 codec {
198 sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>;
199 };
200
201 platform {
202 sound-dai = <&q6apm>;
203 };
204 };
205
206 wsa-dai-link {
207 link-name = "WSA Playback";
208
209 cpu {
210 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
211 };
212
213 codec {
214 sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
215 };
216
217 platform {
218 sound-dai = <&q6apm>;
219 };
220 };
221 };
222
223 vph_pwr: regulator-vph-pwr {
224 compatible = "regulator-fixed";
225
226 regulator-name = "vph_pwr";
227 regulator-min-microvolt = <3700000>;
228 regulator-max-microvolt = <3700000>;
229
230 regulator-always-on;
231 regulator-boot-on;
232 };
233
234 vreg_bob_3v3: regulator-vreg-bob-3v3 {
235 compatible = "regulator-fixed";
236
237 regulator-name = "VREG_BOB_3P3";
238 regulator-min-microvolt = <3300000>;
239 regulator-max-microvolt = <3300000>;
240
241 vin-supply = <&vph_pwr>;
242 };
243
244 wcd939x: audio-codec {
245 compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec";
246
247 pinctrl-0 = <&wcd_default>;
248 pinctrl-names = "default";
249
250 qcom,micbias1-microvolt = <1800000>;
251 qcom,micbias2-microvolt = <1800000>;
252 qcom,micbias3-microvolt = <1800000>;
253 qcom,micbias4-microvolt = <1800000>;
254 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
255 qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
256 qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
257 qcom,rx-device = <&wcd_rx>;
258 qcom,tx-device = <&wcd_tx>;
259
260 reset-gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
261
262 vdd-buck-supply = <&vreg_l15b_1p8>;
263 vdd-rxtx-supply = <&vreg_l15b_1p8>;
264 vdd-io-supply = <&vreg_l15b_1p8>;
265 vdd-mic-bias-supply = <&vreg_bob1>;
266
267 #sound-dai-cells = <1>;
268 };
269
270 wcn7850-pmu {
271 compatible = "qcom,wcn7850-pmu";
272
273 pinctrl-names = "default";
274 pinctrl-0 = <&wlan_en>, <&bt_default>;
275
276 wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
277 bt-enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
278
279 vdd-supply = <&vreg_s4i_0p85>;
280 vddio-supply = <&vreg_l15b_1p8>;
281 vddio1p2-supply = <&vreg_l3c_1p2>;
282 vddaon-supply = <&vreg_s2c_0p8>;
283 vdddig-supply = <&vreg_s3c_0p9>;
284 vddrfa1p2-supply = <&vreg_s1c_1p2>;
285 vddrfa1p8-supply = <&vreg_s6c_1p8>;
286
287 clocks = <&rpmhcc RPMH_RF_CLK1>;
288
289 regulators {
290 vreg_pmu_rfa_cmn: ldo0 {
291 regulator-name = "vreg_pmu_rfa_cmn";
292 };
293
294 vreg_pmu_aon_0p59: ldo1 {
295 regulator-name = "vreg_pmu_aon_0p59";
296 };
297
298 vreg_pmu_wlcx_0p8: ldo2 {
299 regulator-name = "vreg_pmu_wlcx_0p8";
300 };
301
302 vreg_pmu_wlmx_0p85: ldo3 {
303 regulator-name = "vreg_pmu_wlmx_0p85";
304 };
305
306 vreg_pmu_btcmx_0p85: ldo4 {
307 regulator-name = "vreg_pmu_btcmx_0p85";
308 };
309
310 vreg_pmu_rfa_0p8: ldo5 {
311 regulator-name = "vreg_pmu_rfa_0p8";
312 };
313
314 vreg_pmu_rfa_1p2: ldo6 {
315 regulator-name = "vreg_pmu_rfa_1p2";
316 };
317
318 vreg_pmu_rfa_1p8: ldo7 {
319 regulator-name = "vreg_pmu_rfa_1p8";
320 };
321
322 vreg_pmu_pcie_0p9: ldo8 {
323 regulator-name = "vreg_pmu_pcie_0p9";
324 };
325
326 vreg_pmu_pcie_1p8: ldo9 {
327 regulator-name = "vreg_pmu_pcie_1p8";
328 };
329 };
330 };
331 };
332
333 &apps_rsc {
334 regulators-0 {
335 compatible = "qcom,pm8550-rpmh-regulators";
336
337 vdd-bob1-supply = <&vph_pwr>;
338 vdd-bob2-supply = <&vph_pwr>;
339 vdd-l2-l13-l14-supply = <&vreg_bob1>;
340 vdd-l3-supply = <&vreg_s1c_1p2>;
341 vdd-l5-l16-supply = <&vreg_bob1>;
342 vdd-l6-l7-supply = <&vreg_bob1>;
343 vdd-l8-l9-supply = <&vreg_bob1>;
344 vdd-l11-supply = <&vreg_s1c_1p2>;
345 vdd-l12-supply = <&vreg_s6c_1p8>;
346 vdd-l15-supply = <&vreg_s6c_1p8>;
347 vdd-l17-supply = <&vreg_bob2>;
348
349 qcom,pmic-id = "b";
350
351 vreg_bob1: bob1 {
352 regulator-name = "vreg_bob1";
353 regulator-min-microvolt = <3296000>;
354 regulator-max-microvolt = <3960000>;
355 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
356 };
357
358 vreg_bob2: bob2 {
359 regulator-name = "vreg_bob2";
360 regulator-min-microvolt = <2720000>;
361 regulator-max-microvolt = <3008000>;
362 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
363 };
364
365 vreg_l2b_3p0: ldo2 {
366 regulator-name = "vreg_l2b_3p0";
367 regulator-min-microvolt = <3008000>;
368 regulator-max-microvolt = <3008000>;
369 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
370 regulator-allow-set-load;
371 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
372 RPMH_REGULATOR_MODE_HPM>;
373 };
374
375 vreg_l5b_3p1: ldo5 {
376 regulator-name = "vreg_l5b_3p1";
377 regulator-min-microvolt = <3104000>;
378 regulator-max-microvolt = <3104000>;
379 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
380 regulator-allow-set-load;
381 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
382 RPMH_REGULATOR_MODE_HPM>;
383 };
384
385 vreg_l6b_1p8: ldo6 {
386 regulator-name = "vreg_l6b_1p8";
387 regulator-min-microvolt = <1800000>;
388 regulator-max-microvolt = <3008000>;
389 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
390 regulator-allow-set-load;
391 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
392 RPMH_REGULATOR_MODE_HPM>;
393 };
394
395 vreg_l7b_1p8: ldo7 {
396 regulator-name = "vreg_l7b_1p8";
397 regulator-min-microvolt = <1800000>;
398 regulator-max-microvolt = <3008000>;
399 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
400 };
401
402 vreg_l8b_1p8: ldo8 {
403 regulator-name = "vreg_l8b_1p8";
404 regulator-min-microvolt = <1800000>;
405 regulator-max-microvolt = <3008000>;
406 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
407 regulator-allow-set-load;
408 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
409 RPMH_REGULATOR_MODE_HPM>;
410 };
411
412 vreg_l9b_2p9: ldo9 {
413 regulator-name = "vreg_l9b_2p9";
414 regulator-min-microvolt = <2960000>;
415 regulator-max-microvolt = <3008000>;
416 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
417 regulator-allow-set-load;
418 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
419 RPMH_REGULATOR_MODE_HPM>;
420 };
421
422 vreg_l11b_1p2: ldo11 {
423 regulator-name = "vreg_l11b_1p2";
424 regulator-min-microvolt = <1200000>;
425 regulator-max-microvolt = <1504000>;
426 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
427 regulator-allow-set-load;
428 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
429 RPMH_REGULATOR_MODE_HPM>;
430 };
431
432 vreg_l12b_1p8: ldo12 {
433 regulator-name = "vreg_l12b_1p8";
434 regulator-min-microvolt = <1800000>;
435 regulator-max-microvolt = <1800000>;
436 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
437 regulator-allow-set-load;
438 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
439 RPMH_REGULATOR_MODE_HPM>;
440 };
441
442 vreg_l13b_3p0: ldo13 {
443 regulator-name = "vreg_l13b_3p0";
444 regulator-min-microvolt = <3000000>;
445 regulator-max-microvolt = <3000000>;
446 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
447 regulator-allow-set-load;
448 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
449 RPMH_REGULATOR_MODE_HPM>;
450 };
451
452 vreg_l14b_3p2: ldo14 {
453 regulator-name = "vreg_l14b_3p2";
454 regulator-min-microvolt = <3200000>;
455 regulator-max-microvolt = <3200000>;
456 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
457 regulator-allow-set-load;
458 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
459 RPMH_REGULATOR_MODE_HPM>;
460 };
461
462 vreg_l15b_1p8: ldo15 {
463 regulator-name = "vreg_l15b_1p8";
464 regulator-min-microvolt = <1800000>;
465 regulator-max-microvolt = <1800000>;
466 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
467 regulator-allow-set-load;
468 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
469 RPMH_REGULATOR_MODE_HPM>;
470 };
471
472 vreg_l16b_2p8: ldo16 {
473 regulator-name = "vreg_l16b_2p8";
474 regulator-min-microvolt = <2800000>;
475 regulator-max-microvolt = <2800000>;
476 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
477 regulator-allow-set-load;
478 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
479 RPMH_REGULATOR_MODE_HPM>;
480 };
481
482 vreg_l17b_2p5: ldo17 {
483 regulator-name = "vreg_l17b_2p5";
484 regulator-min-microvolt = <2504000>;
485 regulator-max-microvolt = <2504000>;
486 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
487 regulator-allow-set-load;
488 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
489 RPMH_REGULATOR_MODE_HPM>;
490 };
491 };
492
493 regulators-1 {
494 compatible = "qcom,pm8550vs-rpmh-regulators";
495
496 vdd-l1-supply = <&vreg_s1c_1p2>;
497 vdd-l2-supply = <&vreg_s1c_1p2>;
498 vdd-l3-supply = <&vreg_s1c_1p2>;
499 vdd-s1-supply = <&vph_pwr>;
500 vdd-s2-supply = <&vph_pwr>;
501 vdd-s3-supply = <&vph_pwr>;
502 vdd-s4-supply = <&vph_pwr>;
503 vdd-s5-supply = <&vph_pwr>;
504 vdd-s6-supply = <&vph_pwr>;
505
506 qcom,pmic-id = "c";
507
508 vreg_s1c_1p2: smps1 {
509 regulator-name = "vreg_s1c_1p2";
510 regulator-min-microvolt = <1256000>;
511 regulator-max-microvolt = <1348000>;
512 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
513 };
514
515 vreg_s2c_0p8: smps2 {
516 regulator-name = "vreg_s2c_0p8";
517 regulator-min-microvolt = <852000>;
518 regulator-max-microvolt = <1036000>;
519 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
520 };
521
522 vreg_s3c_0p9: smps3 {
523 regulator-name = "vreg_s3c_0p9";
524 regulator-min-microvolt = <976000>;
525 regulator-max-microvolt = <1064000>;
526 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
527 };
528
529 vreg_s4c_1p2: smps4 {
530 regulator-name = "vreg_s4c_1p2";
531 regulator-min-microvolt = <1224000>;
532 regulator-max-microvolt = <1280000>;
533 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
534 };
535
536 vreg_s5c_0p7: smps5 {
537 regulator-name = "vreg_s5c_0p7";
538 regulator-min-microvolt = <752000>;
539 regulator-max-microvolt = <900000>;
540 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
541 };
542
543 vreg_s6c_1p8: smps6 {
544 regulator-name = "vreg_s6c_1p8";
545 regulator-min-microvolt = <1856000>;
546 regulator-max-microvolt = <2000000>;
547 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
548 };
549
550 vreg_l1c_1p2: ldo1 {
551 regulator-name = "vreg_l1c_1p2";
552 regulator-min-microvolt = <1200000>;
553 regulator-max-microvolt = <1200000>;
554 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
555 regulator-allow-set-load;
556 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
557 RPMH_REGULATOR_MODE_HPM>;
558 };
559
560 vreg_l3c_1p2: ldo3 {
561 regulator-name = "vreg_l3c_1p2";
562 regulator-min-microvolt = <1200000>;
563 regulator-max-microvolt = <1200000>;
564 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
565 regulator-allow-set-load;
566 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
567 RPMH_REGULATOR_MODE_HPM>;
568 };
569 };
570
571 regulators-2 {
572 compatible = "qcom,pm8550vs-rpmh-regulators";
573
574 vdd-l1-supply = <&vreg_s3c_0p9>;
575
576 qcom,pmic-id = "d";
577
578 vreg_l1d_0p88: ldo1 {
579 regulator-name = "vreg_l1d_0p88";
580 regulator-min-microvolt = <912000>;
581 regulator-max-microvolt = <920000>;
582 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
583 regulator-allow-set-load;
584 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
585 RPMH_REGULATOR_MODE_HPM>;
586 };
587 };
588
589 regulators-3 {
590 compatible = "qcom,pm8550vs-rpmh-regulators";
591
592 vdd-l3-supply = <&vreg_s3c_0p9>;
593
594 qcom,pmic-id = "e";
595
596 vreg_l3e_0p9: ldo3 {
597 regulator-name = "vreg_l3e_0p9";
598 regulator-min-microvolt = <880000>;
599 regulator-max-microvolt = <920000>;
600 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
601 regulator-allow-set-load;
602 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
603 RPMH_REGULATOR_MODE_HPM>;
604 };
605 };
606
607 regulators-4 {
608 compatible = "qcom,pm8550vs-rpmh-regulators";
609
610 vdd-l1-supply = <&vreg_s3c_0p9>;
611 vdd-l3-supply = <&vreg_s3c_0p9>;
612
613 qcom,pmic-id = "g";
614
615 vreg_l1g_0p91: ldo1 {
616 regulator-name = "vreg_l1g_0p91";
617 regulator-min-microvolt = <912000>;
618 regulator-max-microvolt = <920000>;
619 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
620 regulator-allow-set-load;
621 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
622 RPMH_REGULATOR_MODE_HPM>;
623 };
624
625 vreg_l3g_0p91: ldo3 {
626 regulator-name = "vreg_l3g_0p91";
627 regulator-min-microvolt = <880000>;
628 regulator-max-microvolt = <912000>;
629 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
630 regulator-allow-set-load;
631 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
632 RPMH_REGULATOR_MODE_HPM>;
633 };
634 };
635
636 regulators-5 {
637 compatible = "qcom,pm8550ve-rpmh-regulators";
638
639 vdd-l1-supply = <&vreg_s3c_0p9>;
640 vdd-l2-supply = <&vreg_s3c_0p9>;
641 vdd-l3-supply = <&vreg_s1c_1p2>;
642 vdd-s4-supply = <&vph_pwr>;
643
644 qcom,pmic-id = "i";
645
646 vreg_s4i_0p85: smps4 {
647 regulator-name = "vreg_s4i_0p85";
648 regulator-min-microvolt = <852000>;
649 regulator-max-microvolt = <1004000>;
650 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
651 };
652
653 vreg_l1i_0p88: ldo1 {
654 regulator-name = "vreg_l1i_0p88";
655 regulator-min-microvolt = <880000>;
656 regulator-max-microvolt = <912000>;
657 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
658 regulator-allow-set-load;
659 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
660 RPMH_REGULATOR_MODE_HPM>;
661 };
662
663 vreg_l2i_0p88: ldo2 {
664 regulator-name = "vreg_l2i_0p88";
665 regulator-min-microvolt = <880000>;
666 regulator-max-microvolt = <912000>;
667 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
668 regulator-allow-set-load;
669 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
670 RPMH_REGULATOR_MODE_HPM>;
671 };
672
673 vreg_l3i_1p2: ldo3 {
674 regulator-name = "vreg_l3i_0p91";
675 regulator-min-microvolt = <1200000>;
676 regulator-max-microvolt = <1200000>;
677 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
678 regulator-allow-set-load;
679 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
680 RPMH_REGULATOR_MODE_HPM>;
681 };
682 };
683
684 regulators-6 {
685 compatible = "qcom,pm8010-rpmh-regulators";
686 qcom,pmic-id = "m";
687
688 vdd-l1-l2-supply = <&vreg_s1c_1p2>;
689 vdd-l3-l4-supply = <&vreg_bob2>;
690 vdd-l5-supply = <&vreg_s6c_1p8>;
691 vdd-l6-supply = <&vreg_bob1>;
692 vdd-l7-supply = <&vreg_bob1>;
693
694 vreg_l1m_1p1: ldo1 {
695 regulator-name = "vreg_l1m_1p1";
696 regulator-min-microvolt = <1104000>;
697 regulator-max-microvolt = <1104000>;
698 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
699 regulator-allow-set-load;
700 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
701 RPMH_REGULATOR_MODE_HPM>;
702 };
703
704 vreg_l2m_1p056: ldo2 {
705 regulator-name = "vreg_l2m_1p056";
706 regulator-min-microvolt = <1056000>;
707 regulator-max-microvolt = <1056000>;
708 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
709 regulator-allow-set-load;
710 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
711 RPMH_REGULATOR_MODE_HPM>;
712 };
713
714 vreg_l3m_2p8: ldo3 {
715 regulator-name = "vreg_l3m_2p8";
716 regulator-min-microvolt = <2800000>;
717 regulator-max-microvolt = <2800000>;
718 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
719 };
720
721 vreg_l4m_2p8: ldo4 {
722 regulator-name = "vreg_l4m_2p8";
723 regulator-min-microvolt = <2800000>;
724 regulator-max-microvolt = <2800000>;
725 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
726 };
727
728 vreg_l5m_1p8: ldo5 {
729 regulator-name = "vreg_l5m_1p8";
730 regulator-min-microvolt = <1800000>;
731 regulator-max-microvolt = <1800000>;
732 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
733 };
734
735 vreg_l6m_2p8: ldo6 {
736 regulator-name = "vreg_l6m_2p8";
737 regulator-min-microvolt = <2800000>;
738 regulator-max-microvolt = <2800000>;
739 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
740 };
741
742 vreg_l7m_2p96: ldo7 {
743 regulator-name = "vreg_l7m_2p96";
744 regulator-min-microvolt = <2960000>;
745 regulator-max-microvolt = <2960000>;
746 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
747 };
748 };
749
750 regulators-7 {
751 compatible = "qcom,pm8010-rpmh-regulators";
752 qcom,pmic-id = "n";
753
754 vdd-l1-l2-supply = <&vreg_s1c_1p2>;
755 vdd-l3-l4-supply = <&vreg_s6c_1p8>;
756 vdd-l5-supply = <&vreg_bob2>;
757 vdd-l6-supply = <&vreg_bob2>;
758 vdd-l7-supply = <&vreg_bob1>;
759
760 vreg_l1n_1p1: ldo1 {
761 regulator-name = "vreg_l1n_1p1";
762 regulator-min-microvolt = <1104000>;
763 regulator-max-microvolt = <1104000>;
764 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
765 regulator-allow-set-load;
766 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
767 RPMH_REGULATOR_MODE_HPM>;
768 };
769
770 vreg_l2n_1p056: ldo2 {
771 regulator-name = "vreg_l2n_1p056";
772 regulator-min-microvolt = <1056000>;
773 regulator-max-microvolt = <1056000>;
774 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
775 regulator-allow-set-load;
776 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
777 RPMH_REGULATOR_MODE_HPM>;
778 };
779
780 vreg_l3n_1p8: ldo3 {
781 regulator-name = "vreg_l3n_1p8";
782 regulator-min-microvolt = <1800000>;
783 regulator-max-microvolt = <1800000>;
784 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
785 };
786
787 vreg_l4n_1p8: ldo4 {
788 regulator-name = "vreg_l4n_1p8";
789 regulator-min-microvolt = <1800000>;
790 regulator-max-microvolt = <1800000>;
791 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
792 };
793
794 vreg_l5n_2p8: ldo5 {
795 regulator-name = "vreg_l5n_2p8";
796 regulator-min-microvolt = <2800000>;
797 regulator-max-microvolt = <2800000>;
798 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
799 };
800
801 vreg_l6n_2p8: ldo6 {
802 regulator-name = "vreg_l6n_2p8";
803 regulator-min-microvolt = <2800000>;
804 regulator-max-microvolt = <2800000>;
805 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
806 };
807
808 vreg_l7n_3p3: ldo7 {
809 regulator-name = "vreg_l7n_3p3";
810 regulator-min-microvolt = <3304000>;
811 regulator-max-microvolt = <3304000>;
812 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
813 };
814 };
815 };
816
817 &dispcc {
818 status = "okay";
819 };
820
821 &gpi_dma1 {
822 status = "okay";
823 };
824
825 &i2c3 {
826 status = "okay";
827
828 wcd_usbss: typec-mux@e {
829 compatible = "qcom,wcd9395-usbss", "qcom,wcd9390-usbss";
830 reg = <0xe>;
831
832 vdd-supply = <&vreg_l15b_1p8>;
833 reset-gpios = <&tlmm 152 GPIO_ACTIVE_HIGH>;
834
835 mode-switch;
836 orientation-switch;
837
838 ports {
839 #address-cells = <1>;
840 #size-cells = <0>;
841
842 port@0 {
843 reg = <0>;
844
845 wcd_usbss_sbu_mux: endpoint {
846 remote-endpoint = <&pmic_glink_sbu>;
847 };
848 };
849 };
850 };
851 };
852
853 &i2c6 {
854 clock-frequency = <400000>;
855 status = "okay";
856
857 lt9611_codec: hdmi-bridge@2b {
858 compatible = "lontium,lt9611uxc";
859 reg = <0x2b>;
860
861 interrupts-extended = <&tlmm 85 IRQ_TYPE_EDGE_FALLING>;
862
863 reset-gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
864
865 vdd-supply = <<9611_1v2>;
866 vcc-supply = <<9611_3v3>;
867
868 pinctrl-0 = <<9611_irq_pin>, <<9611_rst_pin>;
869 pinctrl-names = "default";
870
871 ports {
872 #address-cells = <1>;
873 #size-cells = <0>;
874
875 port@0 {
876 reg = <0>;
877
878 lt9611_a: endpoint {
879 remote-endpoint = <&mdss_dsi0_out>;
880 };
881 };
882
883 port@2 {
884 reg = <2>;
885
886 lt9611_out: endpoint {
887 remote-endpoint = <&hdmi_connector_out>;
888 };
889 };
890 };
891 };
892 };
893
894 &ipa {
895 qcom,gsi-loader = "self";
896 memory-region = <&ipa_fw_mem>;
897 firmware-name = "qcom/sm8650/ipa_fws.mbn";
898 status = "okay";
899 };
900
901 &gpu {
902 status = "okay";
903
904 zap-shader {
905 firmware-name = "qcom/sm8650/gen70900_zap.mbn";
906 };
907 };
908
909 &lpass_tlmm {
910 spkr_1_sd_n_active: spkr-1-sd-n-active-state {
911 pins = "gpio21";
912 function = "gpio";
913 drive-strength = <16>;
914 bias-disable;
915 output-low;
916 };
917 };
918
919 &mdss {
920 status = "okay";
921 };
922
923 &mdss_dsi0 {
924 vdda-supply = <&vreg_l3i_1p2>;
925
926 status = "okay";
927 };
928
929 &mdss_dsi0_out {
930 remote-endpoint = <<9611_a>;
931 data-lanes = <0 1 2 3>;
932 };
933
934 &mdss_dsi0_phy {
935 vdds-supply = <&vreg_l1i_0p88>;
936
937 status = "okay";
938 };
939
940 &mdss_dp0 {
941 status = "okay";
942 };
943
944 &mdss_dp0_out {
945 data-lanes = <0 1>;
946 };
947
948 &pcie0 {
949 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
950 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
951
952 pinctrl-0 = <&pcie0_default_state>;
953 pinctrl-names = "default";
954
955 status = "okay";
956 };
957
958 &pcieport0 {
959 wifi@0 {
960 compatible = "pci17cb,1107";
961 reg = <0x10000 0x0 0x0 0x0 0x0>;
962
963 vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
964 vddaon-supply = <&vreg_pmu_aon_0p59>;
965 vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
966 vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
967 vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
968 vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
969 vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
970 vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
971 vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
972 };
973 };
974
975 &pcie0_phy {
976 vdda-phy-supply = <&vreg_l1i_0p88>;
977 vdda-pll-supply = <&vreg_l3i_1p2>;
978
979 status = "okay";
980 };
981
982 &pcie1 {
983 wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
984 perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
985
986 pinctrl-0 = <&pcie1_default_state>;
987 pinctrl-names = "default";
988
989 status = "okay";
990 };
991
992 &pcie1_phy {
993 vdda-phy-supply = <&vreg_l3e_0p9>;
994 vdda-pll-supply = <&vreg_l3i_1p2>;
995 vdda-qref-supply = <&vreg_l1i_0p88>;
996
997 status = "okay";
998 };
999
1000 &pm8550_gpios {
1001 sdc2_card_det_n: sdc2-card-det-state {
1002 pins = "gpio12";
1003 function = "normal";
1004 bias-pull-up;
1005 input-enable;
1006 output-disable;
1007 power-source = <1>; /* 1.8 V */
1008 };
1009
1010 volume_up_n: volume-up-n-state {
1011 pins = "gpio6";
1012 function = "normal";
1013 bias-pull-up;
1014 input-enable;
1015 power-source = <1>;
1016 };
1017 };
1018
1019 /* The RGB signals are routed to 3 separate LEDs on the HDK8650 */
1020 &pm8550_pwm {
1021 #address-cells = <1>;
1022 #size-cells = <0>;
1023
1024 status = "okay";
1025
1026 led@1 {
1027 reg = <1>;
1028 function = LED_FUNCTION_STATUS;
1029 color = <LED_COLOR_ID_RED>;
1030 default-state = "off";
1031 };
1032
1033 led@2 {
1034 reg = <2>;
1035 function = LED_FUNCTION_STATUS;
1036 color = <LED_COLOR_ID_GREEN>;
1037 default-state = "off";
1038 };
1039
1040 led@3 {
1041 reg = <3>;
1042 function = LED_FUNCTION_STATUS;
1043 color = <LED_COLOR_ID_BLUE>;
1044 default-state = "off";
1045 };
1046 };
1047
1048 &pm8550b_eusb2_repeater {
1049 vdd18-supply = <&vreg_l15b_1p8>;
1050 vdd3-supply = <&vreg_l5b_3p1>;
1051 };
1052
1053 &pmk8550_rtc {
1054 status = "okay";
1055 };
1056
1057 &pon_pwrkey {
1058 status = "okay";
1059 };
1060
1061 &pon_resin {
1062 linux,code = <KEY_VOLUMEDOWN>;
1063
1064 status = "okay";
1065 };
1066
1067 &qup_i2c3_data_clk {
1068 /* Use internal I2C pull-up */
1069 bias-pull-up = <2200>;
1070 };
1071
1072 &qupv3_id_0 {
1073 iommus = <&apps_smmu 0xa3 0x3>;
1074
1075 status = "okay";
1076 };
1077
1078 &qupv3_id_1 {
1079 status = "okay";
1080 };
1081
1082 &remoteproc_adsp {
1083 firmware-name = "qcom/sm8650/adsp.mbn",
1084 "qcom/sm8650/adsp_dtb.mbn";
1085
1086 status = "okay";
1087 };
1088
1089 &remoteproc_cdsp {
1090 firmware-name = "qcom/sm8650/cdsp.mbn",
1091 "qcom/sm8650/cdsp_dtb.mbn";
1092
1093 status = "okay";
1094 };
1095
1096 &remoteproc_mpss {
1097 firmware-name = "qcom/sm8650/modem.mbn",
1098 "qcom/sm8650/modem_dtb.mbn";
1099
1100 status = "okay";
1101 };
1102
1103 &sdhc_2 {
1104 cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>;
1105
1106 vmmc-supply = <&vreg_l9b_2p9>;
1107 vqmmc-supply = <&vreg_l8b_1p8>;
1108 bus-width = <4>;
1109 no-sdio;
1110 no-mmc;
1111
1112 pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;
1113 pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;
1114 pinctrl-names = "default", "sleep";
1115
1116 status = "okay";
1117 };
1118
1119 &sleep_clk {
1120 clock-frequency = <32000>;
1121 };
1122
1123 &swr0 {
1124 status = "okay";
1125
1126 /* WSA8845, Speaker North */
1127 north_spkr: speaker@0,0 {
1128 compatible = "sdw20217020400";
1129 reg = <0 0>;
1130 pinctrl-0 = <&spkr_1_sd_n_active>;
1131 pinctrl-names = "default";
1132 powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>;
1133 #sound-dai-cells = <0>;
1134 sound-name-prefix = "SpkrLeft";
1135 vdd-1p8-supply = <&vreg_l15b_1p8>;
1136 vdd-io-supply = <&vreg_l3c_1p2>;
1137
1138 /*
1139 * WSA8845 Port 1 (DAC) <=> SWR0 Port 1 (SPKR_L)
1140 * WSA8845 Port 2 (COMP) <=> SWR0 Port 2 (SPKR_L_COMP)
1141 * WSA8845 Port 3 (BOOST) <=> SWR0 Port 3 (SPKR_L_BOOST)
1142 * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR)
1143 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI)
1144 * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS)
1145 */
1146 qcom,port-mapping = <1 2 3 7 10 13>;
1147 };
1148
1149 /* WSA8845, Speaker South */
1150 south_spkr: speaker@0,1 {
1151 compatible = "sdw20217020400";
1152 reg = <0 1>;
1153 pinctrl-0 = <&spkr_2_sd_n_active>;
1154 pinctrl-names = "default";
1155 powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
1156 #sound-dai-cells = <0>;
1157 sound-name-prefix = "SpkrRight";
1158 vdd-1p8-supply = <&vreg_l15b_1p8>;
1159 vdd-io-supply = <&vreg_l3c_1p2>;
1160
1161 /*
1162 * WSA8845 Port 1 (DAC) <=> SWR0 Port 4 (SPKR_R)
1163 * WSA8845 Port 2 (COMP) <=> SWR0 Port 5 (SPKR_R_COMP)
1164 * WSA8845 Port 3 (BOOST) <=> SWR0 Port 6 (SPKR_R_BOOST)
1165 * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR)
1166 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI)
1167 * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS)
1168 */
1169 qcom,port-mapping = <4 5 6 7 11 13>;
1170 };
1171 };
1172
1173 &swr1 {
1174 status = "okay";
1175
1176 /* WCD9395 RX */
1177 wcd_rx: codec@0,4 {
1178 compatible = "sdw20217010e00";
1179 reg = <0 4>;
1180
1181 /*
1182 * WCD9395 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R)
1183 * WCD9395 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH)
1184 * WCD9395 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R)
1185 * WCD9395 RX Port 4 (LO) <=> SWR1 Port 4 (LO)
1186 * WCD9395 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R)
1187 * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R)
1188 */
1189 qcom,rx-port-mapping = <1 2 3 4 5 9>;
1190 };
1191 };
1192
1193 &swr2 {
1194 status = "okay";
1195
1196 /* WCD9395 TX */
1197 wcd_tx: codec@0,3 {
1198 compatible = "sdw20217010e00";
1199 reg = <0 3>;
1200
1201 /*
1202 * WCD9395 TX Port 1 (ADC1,2,3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
1203 * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
1204 * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7)
1205 * WCD9395 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11)
1206 */
1207 qcom,tx-port-mapping = <2 2 3 4>;
1208 };
1209 };
1210
1211 &tlmm {
1212 /* Reserved I/Os for NFC */
1213 gpio-reserved-ranges = <32 8>, <74 1>;
1214
1215 bt_default: bt-default-state {
1216 bt-en-pins {
1217 pins = "gpio17";
1218 function = "gpio";
1219 drive-strength = <16>;
1220 bias-disable;
1221 };
1222
1223 sw-ctrl-pins {
1224 pins = "gpio18";
1225 function = "gpio";
1226 bias-pull-down;
1227 };
1228 };
1229
1230 lt9611_irq_pin: lt9611-irq-state {
1231 pins = "gpio85";
1232 function = "gpio";
1233 bias-disable;
1234 };
1235
1236 lt9611_rst_pin: lt9611-rst-state {
1237 pins = "gpio28";
1238 function = "gpio";
1239 output-high;
1240 };
1241
1242 spkr_2_sd_n_active: spkr-2-sd-n-active-state {
1243 pins = "gpio77";
1244 function = "gpio";
1245 drive-strength = <16>;
1246 bias-disable;
1247 output-low;
1248 };
1249
1250 wcd_default: wcd-reset-n-active-state {
1251 pins = "gpio107";
1252 function = "gpio";
1253 drive-strength = <16>;
1254 bias-disable;
1255 output-low;
1256 };
1257
1258 wlan_en: wlan-en-state {
1259 pins = "gpio16";
1260 function = "gpio";
1261 drive-strength = <8>;
1262 bias-pull-down;
1263 };
1264 };
1265
1266 &uart14 {
1267 status = "okay";
1268
1269 bluetooth {
1270 compatible = "qcom,wcn7850-bt";
1271
1272 vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
1273 vddaon-supply = <&vreg_pmu_aon_0p59>;
1274 vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
1275 vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
1276 vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
1277 vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
1278 vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
1279
1280 max-speed = <3200000>;
1281 };
1282 };
1283
1284 &uart15 {
1285 status = "okay";
1286 };
1287
1288 &ufs_mem_hc {
1289 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
1290
1291 vcc-supply = <&vreg_l17b_2p5>;
1292 vcc-max-microamp = <1300000>;
1293 vccq-supply = <&vreg_l1c_1p2>;
1294 vccq-max-microamp = <1200000>;
1295
1296 status = "okay";
1297 };
1298
1299 &ufs_mem_phy {
1300 vdda-phy-supply = <&vreg_l1d_0p88>;
1301 vdda-pll-supply = <&vreg_l3i_1p2>;
1302
1303 status = "okay";
1304 };
1305
1306 /*
1307 * DPAUX -> WCD9395 -> USB_SBU -> USB-C
1308 * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C
1309 * USB SS -> USB-C
1310 */
1311
1312 &usb_1 {
1313 status = "okay";
1314 };
1315
1316 &usb_1_dwc3 {
1317 dr_mode = "otg";
1318 usb-role-switch;
1319 };
1320
1321 &usb_1_dwc3_hs {
1322 remote-endpoint = <&pmic_glink_hs_in>;
1323 };
1324
1325 &usb_1_hsphy {
1326 vdd-supply = <&vreg_l1i_0p88>;
1327 vdda12-supply = <&vreg_l3i_1p2>;
1328
1329 phys = <&pm8550b_eusb2_repeater>;
1330
1331 status = "okay";
1332 };
1333
1334 &usb_dp_qmpphy {
1335 vdda-phy-supply = <&vreg_l3i_1p2>;
1336 vdda-pll-supply = <&vreg_l3g_0p91>;
1337
1338 status = "okay";
1339 };
1340
1341 &usb_dp_qmpphy_out {
1342 remote-endpoint = <&pmic_glink_ss_in>;
1343 };
1344
1345 &xo_board {
1346 clock-frequency = <76800000>;
1347 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.