~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/scripts/dtc/include-prefixes/arm64/qcom/x1e80100-lenovo-yoga-slim7x.dts

Version: ~ [ linux-6.12-rc7 ] ~ [ linux-6.11.7 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.60 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.116 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.171 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.229 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.285 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.323 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.12 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 // SPDX-License-Identifier: BSD-3-Clause
  2 /*
  3  * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
  4  */
  5 
  6 /dts-v1/;
  7 
  8 #include <dt-bindings/gpio/gpio.h>
  9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 10 
 11 #include "x1e80100.dtsi"
 12 #include "x1e80100-pmics.dtsi"
 13 
 14 / {
 15         model = "Lenovo Yoga Slim 7x";
 16         compatible = "lenovo,yoga-slim7x", "qcom,x1e80100";
 17 
 18         pmic-glink {
 19                 compatible = "qcom,x1e80100-pmic-glink",
 20                              "qcom,sm8550-pmic-glink",
 21                              "qcom,pmic-glink";
 22                 #address-cells = <1>;
 23                 #size-cells = <0>;
 24                 orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
 25                                     <&tlmm 123 GPIO_ACTIVE_HIGH>,
 26                                     <&tlmm 125 GPIO_ACTIVE_HIGH>;
 27 
 28                 /* Left-side rear port */
 29                 connector@0 {
 30                         compatible = "usb-c-connector";
 31                         reg = <0>;
 32                         power-role = "dual";
 33                         data-role = "dual";
 34 
 35                         ports {
 36                                 #address-cells = <1>;
 37                                 #size-cells = <0>;
 38 
 39                                 port@0 {
 40                                         reg = <0>;
 41 
 42                                         pmic_glink_ss0_hs_in: endpoint {
 43                                                 remote-endpoint = <&usb_1_ss0_dwc3_hs>;
 44                                         };
 45                                 };
 46 
 47                                 port@1 {
 48                                         reg = <1>;
 49 
 50                                         pmic_glink_ss0_ss_in: endpoint {
 51                                                 remote-endpoint = <&usb_1_ss0_qmpphy_out>;
 52                                         };
 53                                 };
 54                         };
 55                 };
 56 
 57                 /* Left-side front port */
 58                 connector@1 {
 59                         compatible = "usb-c-connector";
 60                         reg = <1>;
 61                         power-role = "dual";
 62                         data-role = "dual";
 63 
 64                         ports {
 65                                 #address-cells = <1>;
 66                                 #size-cells = <0>;
 67 
 68                                 port@0 {
 69                                         reg = <0>;
 70 
 71                                         pmic_glink_ss1_hs_in: endpoint {
 72                                                 remote-endpoint = <&usb_1_ss1_dwc3_hs>;
 73                                         };
 74                                 };
 75 
 76                                 port@1 {
 77                                         reg = <1>;
 78 
 79                                         pmic_glink_ss1_ss_in: endpoint {
 80                                                 remote-endpoint = <&usb_1_ss1_qmpphy_out>;
 81                                         };
 82                                 };
 83                         };
 84                 };
 85 
 86                 /* Right-side port */
 87                 connector@2 {
 88                         compatible = "usb-c-connector";
 89                         reg = <2>;
 90                         power-role = "dual";
 91                         data-role = "dual";
 92 
 93                         ports {
 94                                 #address-cells = <1>;
 95                                 #size-cells = <0>;
 96 
 97                                 port@0 {
 98                                         reg = <0>;
 99 
100                                         pmic_glink_ss2_hs_in: endpoint {
101                                                 remote-endpoint = <&usb_1_ss2_dwc3_hs>;
102                                         };
103                                 };
104 
105                                 port@1 {
106                                         reg = <1>;
107 
108                                         pmic_glink_ss2_ss_in: endpoint {
109                                                 remote-endpoint = <&usb_1_ss2_qmpphy_out>;
110                                         };
111                                 };
112                         };
113                 };
114         };
115 
116         reserved-memory {
117                 linux,cma {
118                         compatible = "shared-dma-pool";
119                         size = <0x0 0x8000000>;
120                         reusable;
121                         linux,cma-default;
122                 };
123         };
124 
125         sound {
126                 compatible = "qcom,x1e80100-sndcard";
127                 model = "X1E80100-LENOVO-Yoga-Slim7x";
128                 audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
129                                 "TweeterLeft IN", "WSA WSA_SPK2 OUT",
130                                 "WooferRight IN", "WSA2 WSA_SPK2 OUT",
131                                 "TweeterRight IN", "WSA2 WSA_SPK2 OUT";
132 
133                 wsa-dai-link {
134                         link-name = "WSA Playback";
135 
136                         cpu {
137                                 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
138                         };
139 
140                         codec {
141                                 sound-dai = <&left_woofer>, <&left_tweeter>,
142                                             <&swr0 0>, <&lpass_wsamacro 0>,
143                                             <&right_woofer>, <&right_tweeter>,
144                                             <&swr3 0>, <&lpass_wsa2macro 0>;
145                         };
146 
147                         platform {
148                                 sound-dai = <&q6apm>;
149                         };
150                 };
151 
152                 va-dai-link {
153                         link-name = "VA Capture";
154 
155                         cpu {
156                                 sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
157                         };
158 
159                         codec {
160                                 sound-dai = <&lpass_vamacro 0>;
161                         };
162 
163                         platform {
164                                 sound-dai = <&q6apm>;
165                         };
166                 };
167         };
168 
169         vph_pwr: vph-pwr-regulator {
170                 compatible = "regulator-fixed";
171 
172                 regulator-name = "vph_pwr";
173                 regulator-min-microvolt = <3700000>;
174                 regulator-max-microvolt = <3700000>;
175 
176                 regulator-always-on;
177                 regulator-boot-on;
178         };
179 
180         vreg_edp_3p3: regulator-edp-3p3 {
181                 compatible = "regulator-fixed";
182 
183                 regulator-name = "VREG_EDP_3P3";
184                 regulator-min-microvolt = <3300000>;
185                 regulator-max-microvolt = <3300000>;
186 
187                 gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
188                 enable-active-high;
189 
190                 pinctrl-0 = <&edp_reg_en>;
191                 pinctrl-names = "default";
192 
193                 regulator-boot-on;
194         };
195 
196         vreg_nvme: regulator-nvme {
197                 compatible = "regulator-fixed";
198 
199                 regulator-name = "VREG_NVME_3P3";
200                 regulator-min-microvolt = <3300000>;
201                 regulator-max-microvolt = <3300000>;
202 
203                 gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
204                 enable-active-high;
205 
206                 pinctrl-0 = <&nvme_reg_en>;
207                 pinctrl-names = "default";
208 
209                 regulator-boot-on;
210         };
211 };
212 
213 &apps_rsc {
214         regulators-0 {
215                 compatible = "qcom,pm8550-rpmh-regulators";
216                 qcom,pmic-id = "b";
217 
218                 vdd-bob1-supply = <&vph_pwr>;
219                 vdd-bob2-supply = <&vph_pwr>;
220                 vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
221                 vdd-l2-l13-l14-supply = <&vreg_bob1>;
222                 vdd-l5-l16-supply = <&vreg_bob1>;
223                 vdd-l6-l7-supply = <&vreg_bob2>;
224                 vdd-l8-l9-supply = <&vreg_bob1>;
225                 vdd-l12-supply = <&vreg_s5j_1p2>;
226                 vdd-l15-supply = <&vreg_s4c_1p8>;
227                 vdd-l17-supply = <&vreg_bob2>;
228 
229                 vreg_bob1: bob1 {
230                         regulator-name = "vreg_bob1";
231                         regulator-min-microvolt = <3008000>;
232                         regulator-max-microvolt = <3960000>;
233                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
234                 };
235 
236                 vreg_bob2: bob2 {
237                         regulator-name = "vreg_bob2";
238                         regulator-min-microvolt = <2504000>;
239                         regulator-max-microvolt = <3008000>;
240                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
241                 };
242 
243                 vreg_l1b_1p8: ldo1 {
244                         regulator-name = "vreg_l1b_1p8";
245                         regulator-min-microvolt = <1800000>;
246                         regulator-max-microvolt = <1800000>;
247                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
248                 };
249 
250                 vreg_l2b_3p0: ldo2 {
251                         regulator-name = "vreg_l2b_3p0";
252                         regulator-min-microvolt = <3072000>;
253                         regulator-max-microvolt = <3100000>;
254                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
255                 };
256 
257                 vreg_l8b_3p0: ldo8 {
258                         regulator-name = "vreg_l8b_3p0";
259                         regulator-min-microvolt = <3072000>;
260                         regulator-max-microvolt = <3072000>;
261                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
262                 };
263 
264                 vreg_l12b_1p2: ldo12 {
265                         regulator-name = "vreg_l12b_1p2";
266                         regulator-min-microvolt = <1200000>;
267                         regulator-max-microvolt = <1200000>;
268                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
269                 };
270 
271                 vreg_l14b_3p0: ldo14 {
272                         regulator-name = "vreg_l14b_3p0";
273                         regulator-min-microvolt = <3072000>;
274                         regulator-max-microvolt = <3072000>;
275                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
276                 };
277 
278                 vreg_l15b_1p8: ldo15 {
279                         regulator-name = "vreg_l15b_1p8";
280                         regulator-min-microvolt = <1800000>;
281                         regulator-max-microvolt = <1800000>;
282                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
283                 };
284 
285         };
286 
287         regulators-1 {
288                 compatible = "qcom,pm8550ve-rpmh-regulators";
289                 qcom,pmic-id = "c";
290 
291                 vdd-l1-supply = <&vreg_s5j_1p2>;
292                 vdd-l2-supply = <&vreg_s1f_0p7>;
293                 vdd-l3-supply = <&vreg_s1f_0p7>;
294                 vdd-s4-supply = <&vph_pwr>;
295 
296                 vreg_s4c_1p8: smps4 {
297                         regulator-name = "vreg_s4c_1p8";
298                         regulator-min-microvolt = <1856000>;
299                         regulator-max-microvolt = <2000000>;
300                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
301                 };
302 
303                 vreg_l1c_1p2: ldo1 {
304                         regulator-name = "vreg_l1c_1p2";
305                         regulator-min-microvolt = <1200000>;
306                         regulator-max-microvolt = <1200000>;
307                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
308                 };
309 
310                 vreg_l2c_0p8: ldo2 {
311                         regulator-name = "vreg_l2c_0p8";
312                         regulator-min-microvolt = <880000>;
313                         regulator-max-microvolt = <920000>;
314                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
315                 };
316 
317                 vreg_l3c_0p8: ldo3 {
318                         regulator-name = "vreg_l3c_0p8";
319                         regulator-min-microvolt = <880000>;
320                         regulator-max-microvolt = <920000>;
321                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
322                 };
323         };
324 
325         regulators-2 {
326                 compatible = "qcom,pmc8380-rpmh-regulators";
327                 qcom,pmic-id = "d";
328 
329                 vdd-l1-supply = <&vreg_s1f_0p7>;
330                 vdd-l2-supply = <&vreg_s1f_0p7>;
331                 vdd-l3-supply = <&vreg_s4c_1p8>;
332                 vdd-s1-supply = <&vph_pwr>;
333 
334                 vreg_l1d_0p8: ldo1 {
335                         regulator-name = "vreg_l1d_0p8";
336                         regulator-min-microvolt = <880000>;
337                         regulator-max-microvolt = <920000>;
338                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
339                 };
340 
341                 vreg_l2d_0p9: ldo2 {
342                         regulator-name = "vreg_l2d_0p9";
343                         regulator-min-microvolt = <912000>;
344                         regulator-max-microvolt = <920000>;
345                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
346                 };
347 
348                 vreg_l3d_1p8: ldo3 {
349                         regulator-name = "vreg_l3d_1p8";
350                         regulator-min-microvolt = <1800000>;
351                         regulator-max-microvolt = <1800000>;
352                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
353                 };
354         };
355 
356         regulators-3 {
357                 compatible = "qcom,pmc8380-rpmh-regulators";
358                 qcom,pmic-id = "e";
359 
360                 vdd-l2-supply = <&vreg_s1f_0p7>;
361                 vdd-l3-supply = <&vreg_s5j_1p2>;
362 
363                 vreg_l2e_0p8: ldo2 {
364                         regulator-name = "vreg_l2e_0p8";
365                         regulator-min-microvolt = <880000>;
366                         regulator-max-microvolt = <920000>;
367                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
368                 };
369 
370                 vreg_l3e_1p2: ldo3 {
371                         regulator-name = "vreg_l3e_1p2";
372                         regulator-min-microvolt = <1200000>;
373                         regulator-max-microvolt = <1200000>;
374                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
375                 };
376         };
377 
378         regulators-4 {
379                 compatible = "qcom,pmc8380-rpmh-regulators";
380                 qcom,pmic-id = "f";
381 
382                 vdd-l1-supply = <&vreg_s5j_1p2>;
383                 vdd-l2-supply = <&vreg_s5j_1p2>;
384                 vdd-l3-supply = <&vreg_s5j_1p2>;
385                 vdd-s1-supply = <&vph_pwr>;
386 
387                 vreg_s1f_0p7: smps1 {
388                         regulator-name = "vreg_s1f_0p7";
389                         regulator-min-microvolt = <700000>;
390                         regulator-max-microvolt = <1100000>;
391                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
392                 };
393 
394                 vreg_l1f_1p0: ldo1 {
395                         regulator-name = "vreg_l1f_1p0";
396                         regulator-min-microvolt = <1024000>;
397                         regulator-max-microvolt = <1024000>;
398                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
399                 };
400 
401                 vreg_l2f_1p0: ldo2 {
402                         regulator-name = "vreg_l2f_1p0";
403                         regulator-min-microvolt = <1024000>;
404                         regulator-max-microvolt = <1024000>;
405                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
406                 };
407 
408                 vreg_l3f_1p0: ldo3 {
409                         regulator-name = "vreg_l3f_1p0";
410                         regulator-min-microvolt = <1024000>;
411                         regulator-max-microvolt = <1024000>;
412                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
413                 };
414         };
415 
416         regulators-6 {
417                 compatible = "qcom,pm8550ve-rpmh-regulators";
418                 qcom,pmic-id = "i";
419 
420                 vdd-l1-supply = <&vreg_s4c_1p8>;
421                 vdd-l2-supply = <&vreg_s5j_1p2>;
422                 vdd-l3-supply = <&vreg_s1f_0p7>;
423                 vdd-s1-supply = <&vph_pwr>;
424                 vdd-s2-supply = <&vph_pwr>;
425 
426                 vreg_s1i_0p9: smps1 {
427                         regulator-name = "vreg_s1i_0p9";
428                         regulator-min-microvolt = <900000>;
429                         regulator-max-microvolt = <920000>;
430                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
431                 };
432 
433                 vreg_s2i_1p0: smps2 {
434                         regulator-name = "vreg_s2i_1p0";
435                         regulator-min-microvolt = <1000000>;
436                         regulator-max-microvolt = <1100000>;
437                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
438                 };
439 
440                 vreg_l1i_1p8: ldo1 {
441                         regulator-name = "vreg_l1i_1p8";
442                         regulator-min-microvolt = <1800000>;
443                         regulator-max-microvolt = <1800000>;
444                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
445                 };
446 
447                 vreg_l2i_1p2: ldo2 {
448                         regulator-name = "vreg_l2i_1p2";
449                         regulator-min-microvolt = <1200000>;
450                         regulator-max-microvolt = <1200000>;
451                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
452                 };
453 
454                 vreg_l3i_0p8: ldo3 {
455                         regulator-name = "vreg_l3i_0p8";
456                         regulator-min-microvolt = <880000>;
457                         regulator-max-microvolt = <920000>;
458                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
459                 };
460         };
461 
462         regulators-7 {
463                 compatible = "qcom,pm8550ve-rpmh-regulators";
464                 qcom,pmic-id = "j";
465 
466                 vdd-l1-supply = <&vreg_s1f_0p7>;
467                 vdd-l2-supply = <&vreg_s5j_1p2>;
468                 vdd-l3-supply = <&vreg_s1f_0p7>;
469                 vdd-s5-supply = <&vph_pwr>;
470 
471                 vreg_s5j_1p2: smps5 {
472                         regulator-name = "vreg_s5j_1p2";
473                         regulator-min-microvolt = <1256000>;
474                         regulator-max-microvolt = <1304000>;
475                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
476                 };
477 
478                 vreg_l1j_0p8: ldo1 {
479                         regulator-name = "vreg_l1j_0p8";
480                         regulator-min-microvolt = <880000>;
481                         regulator-max-microvolt = <920000>;
482                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
483                 };
484 
485                 vreg_l2j_1p2: ldo2 {
486                         regulator-name = "vreg_l2j_1p2";
487                         regulator-min-microvolt = <1200000>;
488                         regulator-max-microvolt = <1200000>;
489                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
490                 };
491 
492                 vreg_l3j_0p8: ldo3 {
493                         regulator-name = "vreg_l3j_0p8";
494                         regulator-min-microvolt = <880000>;
495                         regulator-max-microvolt = <920000>;
496                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
497                 };
498         };
499 };
500 
501 &gpu {
502         status = "okay";
503 
504         zap-shader {
505                 firmware-name = "qcom/x1e80100/LENOVO/83ED/qcdxkmsuc8380.mbn";
506         };
507 };
508 
509 &i2c0 {
510         clock-frequency = <400000>;
511 
512         status = "okay";
513 
514         touchpad@2c {
515                 compatible = "hid-over-i2c";
516                 reg = <0x2c>;
517 
518                 hid-descr-addr = <0x20>;
519                 interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
520 
521                 pinctrl-0 = <&tpad_default>;
522                 pinctrl-names = "default";
523 
524                 wakeup-source;
525         };
526 
527         keyboard@3a {
528                 compatible = "hid-over-i2c";
529                 reg = <0x3a>;
530 
531                 hid-descr-addr = <0x1>;
532                 interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
533 
534                 pinctrl-0 = <&kybd_default>;
535                 pinctrl-names = "default";
536 
537                 wakeup-source;
538         };
539 };
540 
541 &i2c8 {
542         clock-frequency = <400000>;
543 
544         status = "okay";
545 
546         touchscreen@14 {
547                 compatible = "hid-over-i2c";
548                 reg = <0x14>;
549 
550                 hid-descr-addr = <0x1>;
551                 interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
552 
553                 pinctrl-0 = <&ts0_default>;
554                 pinctrl-names = "default";
555         };
556 };
557 
558 &lpass_tlmm {
559         spkr_01_sd_n_active: spkr-01-sd-n-active-state {
560                 pins = "gpio12";
561                 function = "gpio";
562                 drive-strength = <16>;
563                 bias-disable;
564                 output-low;
565         };
566 
567         spkr_23_sd_n_active: spkr-23-sd-n-active-state {
568                 pins = "gpio13";
569                 function = "gpio";
570                 drive-strength = <16>;
571                 bias-disable;
572                 output-low;
573         };
574 };
575 
576 &lpass_vamacro {
577         pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
578         pinctrl-names = "default";
579 
580         vdd-micb-supply = <&vreg_l1b_1p8>;
581         qcom,dmic-sample-rate = <4800000>;
582 };
583 
584 &mdss {
585         status = "okay";
586 };
587 
588 &mdss_dp3 {
589         compatible = "qcom,x1e80100-dp";
590         /delete-property/ #sound-dai-cells;
591 
592         status = "okay";
593 
594         aux-bus {
595                 panel {
596                         compatible = "samsung,atna45dc02", "samsung,atna33xc20";
597                         enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
598                         power-supply = <&vreg_edp_3p3>;
599 
600                         pinctrl-0 = <&edp_bl_en>;
601                         pinctrl-names = "default";
602 
603                         port {
604                                 edp_panel_in: endpoint {
605                                         remote-endpoint = <&mdss_dp3_out>;
606                                 };
607                         };
608                 };
609         };
610 
611         ports {
612                 port@1 {
613                         reg = <1>;
614 
615                         mdss_dp3_out: endpoint {
616                                 data-lanes = <0 1 2 3>;
617                                 link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
618 
619                                 remote-endpoint = <&edp_panel_in>;
620                         };
621                 };
622         };
623 };
624 
625 &mdss_dp3_phy {
626         vdda-phy-supply = <&vreg_l3j_0p8>;
627         vdda-pll-supply = <&vreg_l2j_1p2>;
628 
629         status = "okay";
630 };
631 
632 &pcie4 {
633         perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
634         wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
635 
636         pinctrl-0 = <&pcie4_default>;
637         pinctrl-names = "default";
638 
639         status = "okay";
640 };
641 
642 &pcie4_phy {
643         vdda-phy-supply = <&vreg_l3i_0p8>;
644         vdda-pll-supply = <&vreg_l3e_1p2>;
645 
646         status = "okay";
647 };
648 
649 &pcie4_port0 {
650         wifi@0 {
651                 compatible = "pci17cb,1107";
652                 reg = <0x10000 0x0 0x0 0x0 0x0>;
653 
654                 qcom,ath12k-calibration-variant = "LES790";
655         };
656 };
657 
658 &pcie6a {
659         perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
660         wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
661 
662         vddpe-3v3-supply = <&vreg_nvme>;
663 
664         pinctrl-0 = <&pcie6a_default>;
665         pinctrl-names = "default";
666 
667         status = "okay";
668 };
669 
670 &pcie6a_phy {
671         vdda-phy-supply = <&vreg_l1d_0p8>;
672         vdda-pll-supply = <&vreg_l2j_1p2>;
673 
674         status = "okay";
675 };
676 
677 &pmc8380_3_gpios {
678         edp_bl_en: edp-bl-en-state {
679                 pins = "gpio4";
680                 function = "normal";
681                 power-source = <0>;
682                 input-disable;
683                 output-enable;
684         };
685 };
686 
687 &qupv3_0 {
688         status = "okay";
689 };
690 
691 &qupv3_1 {
692         status = "okay";
693 };
694 
695 &qupv3_2 {
696         status = "okay";
697 };
698 
699 &remoteproc_adsp {
700         firmware-name = "qcom/x1e80100/LENOVO/83ED/qcadsp8380.mbn",
701                         "qcom/x1e80100/LENOVO/83ED/adsp_dtbs.elf";
702         status = "okay";
703 };
704 
705 &remoteproc_cdsp {
706         firmware-name = "qcom/x1e80100/LENOVO/83ED/qccdsp8380.mbn",
707                         "qcom/x1e80100/LENOVO/83ED/cdsp_dtbs.elf";
708 
709         status = "okay";
710 };
711 
712 &smb2360_0_eusb2_repeater {
713         vdd18-supply = <&vreg_l3d_1p8>;
714         vdd3-supply = <&vreg_l2b_3p0>;
715 };
716 
717 &smb2360_1_eusb2_repeater {
718         vdd18-supply = <&vreg_l3d_1p8>;
719         vdd3-supply = <&vreg_l14b_3p0>;
720 };
721 
722 &smb2360_2 {
723         status = "okay";
724 };
725 
726 &smb2360_2_eusb2_repeater {
727         vdd18-supply = <&vreg_l3d_1p8>;
728         vdd3-supply = <&vreg_l8b_3p0>;
729 };
730 
731 &swr0 {
732         status = "okay";
733 
734         pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
735         pinctrl-names = "default";
736 
737         /* WSA8845, Left Woofer */
738         left_woofer: speaker@0,0 {
739                 compatible = "sdw20217020400";
740                 reg = <0 0>;
741                 reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
742                 #sound-dai-cells = <0>;
743                 sound-name-prefix = "WooferLeft";
744                 vdd-1p8-supply = <&vreg_l15b_1p8>;
745                 vdd-io-supply = <&vreg_l12b_1p2>;
746                 qcom,port-mapping = <1 2 3 7 10 13>;
747         };
748 
749         /* WSA8845, Left Tweeter */
750         left_tweeter: speaker@0,1 {
751                 compatible = "sdw20217020400";
752                 reg = <0 1>;
753                 reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
754                 #sound-dai-cells = <0>;
755                 sound-name-prefix = "TweeterLeft";
756                 vdd-1p8-supply = <&vreg_l15b_1p8>;
757                 vdd-io-supply = <&vreg_l12b_1p2>;
758                 qcom,port-mapping = <4 5 6 7 11 13>;
759         };
760 };
761 
762 
763 &swr3 {
764         status = "okay";
765 
766         pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>;
767         pinctrl-names = "default";
768 
769         /* WSA8845, Right Woofer */
770         right_woofer: speaker@0,0 {
771                 compatible = "sdw20217020400";
772                 reg = <0 0>;
773                 reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
774                 #sound-dai-cells = <0>;
775                 sound-name-prefix = "WooferRight";
776                 vdd-1p8-supply = <&vreg_l15b_1p8>;
777                 vdd-io-supply = <&vreg_l12b_1p2>;
778                 qcom,port-mapping = <1 2 3 7 10 13>;
779         };
780 
781         /* WSA8845, Right Tweeter */
782         right_tweeter: speaker@0,1 {
783                 compatible = "sdw20217020400";
784                 reg = <0 1>;
785                 reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
786                 #sound-dai-cells = <0>;
787                 sound-name-prefix = "TweeterRight";
788                 vdd-1p8-supply = <&vreg_l15b_1p8>;
789                 vdd-io-supply = <&vreg_l12b_1p2>;
790                 qcom,port-mapping = <4 5 6 7 11 13>;
791         };
792 };
793 
794 &tlmm {
795         gpio-reserved-ranges = <34 2>, /* Unused */
796                                <44 4>, /* SPI (TPM) */
797                                <238 1>; /* UFS Reset */
798 
799         edp_reg_en: edp-reg-en-state {
800                 pins = "gpio70";
801                 function = "gpio";
802                 drive-strength = <16>;
803                 bias-disable;
804         };
805 
806         kybd_default: kybd-default-state {
807                 pins = "gpio67";
808                 function = "gpio";
809                 bias-disable;
810         };
811 
812         nvme_reg_en: nvme-reg-en-state {
813                 pins = "gpio18";
814                 function = "gpio";
815                 drive-strength = <2>;
816                 bias-disable;
817         };
818 
819         pcie4_default: pcie4-default-state {
820                 clkreq-n-pins {
821                         pins = "gpio147";
822                         function = "pcie4_clk";
823                         drive-strength = <2>;
824                         bias-pull-up;
825                 };
826 
827                 perst-n-pins {
828                         pins = "gpio146";
829                         function = "gpio";
830                         drive-strength = <2>;
831                         bias-disable;
832                 };
833 
834                 wake-n-pins {
835                         pins = "gpio148";
836                         function = "gpio";
837                         drive-strength = <2>;
838                         bias-pull-up;
839                 };
840         };
841 
842         pcie6a_default: pcie6a-default-state {
843                 clkreq-n-pins {
844                         pins = "gpio153";
845                         function = "pcie6a_clk";
846                         drive-strength = <2>;
847                         bias-pull-up;
848                 };
849 
850                 perst-n-pins {
851                         pins = "gpio152";
852                         function = "gpio";
853                         drive-strength = <2>;
854                         bias-disable;
855                 };
856 
857                 wake-n-pins {
858                         pins = "gpio154";
859                         function = "gpio";
860                         drive-strength = <2>;
861                         bias-pull-up;
862                 };
863         };
864 
865         tpad_default: tpad-default-state {
866                 pins = "gpio3";
867                 function = "gpio";
868                 bias-disable;
869         };
870 
871         ts0_default: ts0-default-state {
872                 int-n-pins {
873                         pins = "gpio51";
874                         function = "gpio";
875                         bias-disable;
876                 };
877 
878                 reset-n-pins {
879                         pins = "gpio48";
880                         function = "gpio";
881                         output-high;
882                         drive-strength = <16>;
883                 };
884         };
885 
886 };
887 
888 &usb_1_ss0_hsphy {
889         vdd-supply = <&vreg_l3j_0p8>;
890         vdda12-supply = <&vreg_l2j_1p2>;
891 
892         phys = <&smb2360_0_eusb2_repeater>;
893 
894         status = "okay";
895 };
896 
897 &usb_1_ss0_qmpphy {
898         vdda-phy-supply = <&vreg_l3e_1p2>;
899         vdda-pll-supply = <&vreg_l1j_0p8>;
900 
901         orientation-switch;
902 
903         status = "okay";
904 };
905 
906 &usb_1_ss0 {
907         status = "okay";
908 };
909 
910 &usb_1_ss0_dwc3 {
911         dr_mode = "host";
912 };
913 
914 &usb_1_ss0_dwc3_hs {
915         remote-endpoint = <&pmic_glink_ss0_hs_in>;
916 };
917 
918 &usb_1_ss0_qmpphy_out {
919         remote-endpoint = <&pmic_glink_ss0_ss_in>;
920 };
921 
922 &usb_1_ss1_hsphy {
923         vdd-supply = <&vreg_l3j_0p8>;
924         vdda12-supply = <&vreg_l2j_1p2>;
925 
926         phys = <&smb2360_1_eusb2_repeater>;
927 
928         status = "okay";
929 };
930 
931 &usb_1_ss1_qmpphy {
932         vdda-phy-supply = <&vreg_l3e_1p2>;
933         vdda-pll-supply = <&vreg_l2d_0p9>;
934 
935         orientation-switch;
936 
937         status = "okay";
938 };
939 
940 &usb_1_ss1 {
941         status = "okay";
942 };
943 
944 &usb_1_ss1_dwc3 {
945         dr_mode = "host";
946 };
947 
948 &usb_1_ss1_dwc3_hs {
949         remote-endpoint = <&pmic_glink_ss1_hs_in>;
950 };
951 
952 &usb_1_ss1_qmpphy_out {
953         remote-endpoint = <&pmic_glink_ss1_ss_in>;
954 };
955 
956 &usb_1_ss2_hsphy {
957         vdd-supply = <&vreg_l3j_0p8>;
958         vdda12-supply = <&vreg_l2j_1p2>;
959 
960         phys = <&smb2360_2_eusb2_repeater>;
961 
962         status = "okay";
963 };
964 
965 &usb_1_ss2_qmpphy {
966         vdda-phy-supply = <&vreg_l3e_1p2>;
967         vdda-pll-supply = <&vreg_l2d_0p9>;
968 
969         status = "okay";
970 };
971 
972 &usb_1_ss2 {
973         status = "okay";
974 };
975 
976 &usb_1_ss2_dwc3 {
977         dr_mode = "host";
978 };
979 
980 &usb_1_ss2_dwc3_hs {
981         remote-endpoint = <&pmic_glink_ss2_hs_in>;
982 };
983 
984 &usb_1_ss2_qmpphy_out {
985         remote-endpoint = <&pmic_glink_ss2_ss_in>;
986 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php