1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2
3 /dts-v1/;
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/pinctrl/rockchip.h>
7 #include <dt-bindings/soc/rockchip,vop2.h>
8 #include "rk3566.dtsi"
9
10 / {
11 model = "Pine64 Quartz64 Model A";
12 compatible = "pine64,quartz64-a", "rockchip,rk3566";
13
14 aliases {
15 ethernet0 = &gmac1;
16 mmc0 = &sdmmc0;
17 mmc1 = &sdhci;
18 };
19
20 chosen: chosen {
21 stdout-path = "serial2:1500000n8";
22 };
23
24 gmac1_clkin: external-gmac1-clock {
25 compatible = "fixed-clock";
26 clock-frequency = <125000000>;
27 clock-output-names = "gmac1_clkin";
28 #clock-cells = <0>;
29 };
30
31 fan: gpio_fan {
32 compatible = "gpio-fan";
33 gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
34 gpio-fan,speed-map =
35 < 0 0>,
36 <4500 1>;
37 pinctrl-names = "default";
38 pinctrl-0 = <&fan_en_h>;
39 #cooling-cells = <2>;
40 };
41
42 hdmi-con {
43 compatible = "hdmi-connector";
44 type = "a";
45
46 port {
47 hdmi_con_in: endpoint {
48 remote-endpoint = <&hdmi_out_con>;
49 };
50 };
51 };
52
53 leds {
54 compatible = "gpio-leds";
55
56 led-work {
57 label = "work-led";
58 default-state = "off";
59 gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
60 pinctrl-names = "default";
61 pinctrl-0 = <&work_led_enable_h>;
62 retain-state-suspended;
63 };
64
65 led-diy {
66 label = "diy-led";
67 default-state = "on";
68 gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
69 linux,default-trigger = "heartbeat";
70 pinctrl-names = "default";
71 pinctrl-0 = <&diy_led_enable_h>;
72 retain-state-suspended;
73 };
74 };
75
76 rk817-sound {
77 compatible = "simple-audio-card";
78 simple-audio-card,format = "i2s";
79 simple-audio-card,name = "Analog RK817";
80 simple-audio-card,mclk-fs = <256>;
81
82 simple-audio-card,cpu {
83 sound-dai = <&i2s1_8ch>;
84 };
85
86 simple-audio-card,codec {
87 sound-dai = <&rk817>;
88 };
89 };
90
91 sdio_pwrseq: sdio-pwrseq {
92 compatible = "mmc-pwrseq-simple";
93 clocks = <&rk817 1>;
94 clock-names = "ext_clock";
95 pinctrl-names = "default";
96 pinctrl-0 = <&wifi_enable_h>;
97 post-power-on-delay-ms = <100>;
98 power-off-delay-us = <5000000>;
99 reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>;
100 };
101
102 spdif_dit: spdif-dit {
103 compatible = "linux,spdif-dit";
104 #sound-dai-cells = <0>;
105 };
106
107 spdif_sound: spdif-sound {
108 compatible = "simple-audio-card";
109 simple-audio-card,name = "SPDIF";
110
111 simple-audio-card,cpu {
112 sound-dai = <&spdif>;
113 };
114
115 simple-audio-card,codec {
116 sound-dai = <&spdif_dit>;
117 };
118 };
119
120 vcc12v_dcin: vcc12v_dcin {
121 compatible = "regulator-fixed";
122 regulator-name = "vcc12v_dcin";
123 regulator-always-on;
124 regulator-boot-on;
125 regulator-min-microvolt = <12000000>;
126 regulator-max-microvolt = <12000000>;
127 };
128
129 /* vbus feeds the rk817 usb input.
130 * With no battery attached, also feeds vcc_bat+
131 * via ON/OFF_BAT jumper
132 */
133 vbus: vbus {
134 compatible = "regulator-fixed";
135 regulator-name = "vbus";
136 regulator-always-on;
137 regulator-boot-on;
138 regulator-min-microvolt = <5000000>;
139 regulator-max-microvolt = <5000000>;
140 vin-supply = <&vcc12v_dcin>;
141 };
142
143 vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
144 compatible = "regulator-fixed";
145 enable-active-high;
146 gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
147 pinctrl-names = "default";
148 pinctrl-0 = <&pcie_enable_h>;
149 regulator-name = "vcc3v3_pcie_p";
150 regulator-min-microvolt = <3300000>;
151 regulator-max-microvolt = <3300000>;
152 vin-supply = <&vcc_3v3>;
153 };
154
155 vcc5v0_usb: vcc5v0_usb {
156 compatible = "regulator-fixed";
157 regulator-name = "vcc5v0_usb";
158 regulator-always-on;
159 regulator-boot-on;
160 regulator-min-microvolt = <5000000>;
161 regulator-max-microvolt = <5000000>;
162 vin-supply = <&vcc12v_dcin>;
163 };
164
165 /* all four ports are controlled by one gpio
166 * the host ports are sourced from vcc5v0_usb
167 * the otg port is sourced from vcc5v0_midu
168 */
169 vcc5v0_usb20_host: vcc5v0_usb20_host {
170 compatible = "regulator-fixed";
171 enable-active-high;
172 gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
173 pinctrl-names = "default";
174 pinctrl-0 = <&vcc5v0_usb20_host_en>;
175 regulator-name = "vcc5v0_usb20_host";
176 regulator-min-microvolt = <5000000>;
177 regulator-max-microvolt = <5000000>;
178 vin-supply = <&vcc5v0_usb>;
179 };
180
181 vcc5v0_usb20_otg: vcc5v0_usb20_otg {
182 compatible = "regulator-fixed";
183 enable-active-high;
184 gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
185 regulator-name = "vcc5v0_usb20_otg";
186 regulator-min-microvolt = <5000000>;
187 regulator-max-microvolt = <5000000>;
188 vin-supply = <&dcdc_boost>;
189 };
190
191 vcc3v3_sd: vcc3v3_sd {
192 compatible = "regulator-fixed";
193 gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
194 pinctrl-names = "default";
195 pinctrl-0 = <&vcc_sd_h>;
196 regulator-boot-on;
197 regulator-name = "vcc3v3_sd";
198 regulator-min-microvolt = <3300000>;
199 regulator-max-microvolt = <3300000>;
200 vin-supply = <&vcc_3v3>;
201 };
202
203 /* sourced from vbus and vcc_bat+ via rk817 sw5 */
204 vcc_sys: vcc_sys {
205 compatible = "regulator-fixed";
206 regulator-name = "vcc_sys";
207 regulator-always-on;
208 regulator-boot-on;
209 regulator-min-microvolt = <4400000>;
210 regulator-max-microvolt = <4400000>;
211 vin-supply = <&vbus>;
212 };
213
214 /* sourced from vcc_sys, sdio module operates internally at 3.3v */
215 vcc_wl: vcc_wl {
216 compatible = "regulator-fixed";
217 regulator-name = "vcc_wl";
218 regulator-always-on;
219 regulator-boot-on;
220 regulator-min-microvolt = <3300000>;
221 regulator-max-microvolt = <3300000>;
222 vin-supply = <&vcc_sys>;
223 };
224 };
225
226 &combphy1 {
227 status = "okay";
228 };
229
230 &combphy2 {
231 status = "okay";
232 };
233
234 &cpu0 {
235 cpu-supply = <&vdd_cpu>;
236 };
237
238 &cpu1 {
239 cpu-supply = <&vdd_cpu>;
240 };
241
242 &cpu2 {
243 cpu-supply = <&vdd_cpu>;
244 };
245
246 &cpu3 {
247 cpu-supply = <&vdd_cpu>;
248 };
249
250 &cpu_thermal {
251 trips {
252 cpu_hot: cpu_hot {
253 temperature = <55000>;
254 hysteresis = <2000>;
255 type = "active";
256 };
257 };
258
259 cooling-maps {
260 map1 {
261 trip = <&cpu_hot>;
262 cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
263 };
264 };
265 };
266
267 &gmac1 {
268 assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
269 assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
270 clock_in_out = "input";
271 phy-supply = <&vcc_3v3>;
272 phy-mode = "rgmii";
273 pinctrl-names = "default";
274 pinctrl-0 = <&gmac1m0_miim
275 &gmac1m0_tx_bus2
276 &gmac1m0_rx_bus2
277 &gmac1m0_rgmii_clk
278 &gmac1m0_clkinout
279 &gmac1m0_rgmii_bus>;
280 snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>;
281 snps,reset-active-low;
282 /* Reset time is 20ms, 100ms for rtl8211f */
283 snps,reset-delays-us = <0 20000 100000>;
284 tx_delay = <0x30>;
285 rx_delay = <0x10>;
286 phy-handle = <&rgmii_phy1>;
287 status = "okay";
288 };
289
290 &gpu {
291 mali-supply = <&vdd_gpu>;
292 status = "okay";
293 };
294
295 &hdmi {
296 avdd-0v9-supply = <&vdda_0v9>;
297 avdd-1v8-supply = <&vcc_1v8>;
298 status = "okay";
299 };
300
301 &hdmi_in {
302 hdmi_in_vp0: endpoint {
303 remote-endpoint = <&vp0_out_hdmi>;
304 };
305 };
306
307 &hdmi_out {
308 hdmi_out_con: endpoint {
309 remote-endpoint = <&hdmi_con_in>;
310 };
311 };
312
313 &hdmi_sound {
314 status = "okay";
315 };
316
317 &i2c0 {
318 status = "okay";
319
320 vdd_cpu: regulator@1c {
321 compatible = "tcs,tcs4525";
322 reg = <0x1c>;
323 fcs,suspend-voltage-selector = <1>;
324 regulator-name = "vdd_cpu";
325 regulator-min-microvolt = <800000>;
326 regulator-max-microvolt = <1150000>;
327 regulator-ramp-delay = <2300>;
328 regulator-always-on;
329 regulator-boot-on;
330 vin-supply = <&vcc_sys>;
331
332 regulator-state-mem {
333 regulator-off-in-suspend;
334 };
335 };
336
337 rk817: pmic@20 {
338 compatible = "rockchip,rk817";
339 reg = <0x20>;
340 interrupt-parent = <&gpio0>;
341 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
342 assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
343 assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
344 clock-names = "mclk";
345 clocks = <&cru I2S1_MCLKOUT_TX>;
346 clock-output-names = "rk808-clkout1", "rk808-clkout2";
347 #clock-cells = <1>;
348 pinctrl-names = "default";
349 pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
350 rockchip,system-power-controller;
351 #sound-dai-cells = <0>;
352 wakeup-source;
353
354 vcc1-supply = <&vcc_sys>;
355 vcc2-supply = <&vcc_sys>;
356 vcc3-supply = <&vcc_sys>;
357 vcc4-supply = <&vcc_sys>;
358 vcc5-supply = <&vcc_sys>;
359 vcc6-supply = <&vcc_sys>;
360 vcc7-supply = <&vcc_sys>;
361 vcc8-supply = <&vcc_sys>;
362 vcc9-supply = <&dcdc_boost>;
363
364 regulators {
365 vdd_logic: DCDC_REG1 {
366 regulator-always-on;
367 regulator-boot-on;
368 regulator-min-microvolt = <500000>;
369 regulator-max-microvolt = <1350000>;
370 regulator-ramp-delay = <6001>;
371 regulator-initial-mode = <0x2>;
372 regulator-name = "vdd_logic";
373 regulator-state-mem {
374 regulator-on-in-suspend;
375 regulator-suspend-microvolt = <900000>;
376 };
377 };
378
379 vdd_gpu: DCDC_REG2 {
380 regulator-always-on;
381 regulator-boot-on;
382 regulator-min-microvolt = <500000>;
383 regulator-max-microvolt = <1350000>;
384 regulator-ramp-delay = <6001>;
385 regulator-initial-mode = <0x2>;
386 regulator-name = "vdd_gpu";
387 regulator-state-mem {
388 regulator-off-in-suspend;
389 };
390 };
391
392 vcc_ddr: DCDC_REG3 {
393 regulator-always-on;
394 regulator-boot-on;
395 regulator-initial-mode = <0x2>;
396 regulator-name = "vcc_ddr";
397 regulator-state-mem {
398 regulator-on-in-suspend;
399 };
400 };
401
402 vcc_3v3: DCDC_REG4 {
403 regulator-always-on;
404 regulator-boot-on;
405 regulator-min-microvolt = <3300000>;
406 regulator-max-microvolt = <3300000>;
407 regulator-initial-mode = <0x2>;
408 regulator-name = "vcc_3v3";
409 regulator-state-mem {
410 regulator-off-in-suspend;
411 };
412 };
413
414 vcca1v8_pmu: LDO_REG1 {
415 regulator-always-on;
416 regulator-boot-on;
417 regulator-min-microvolt = <1800000>;
418 regulator-max-microvolt = <1800000>;
419 regulator-name = "vcca1v8_pmu";
420 regulator-state-mem {
421 regulator-on-in-suspend;
422 regulator-suspend-microvolt = <1800000>;
423 };
424 };
425
426 vdda_0v9: LDO_REG2 {
427 regulator-always-on;
428 regulator-boot-on;
429 regulator-min-microvolt = <900000>;
430 regulator-max-microvolt = <900000>;
431 regulator-name = "vdda_0v9";
432 regulator-state-mem {
433 regulator-off-in-suspend;
434 };
435 };
436
437 vdda0v9_pmu: LDO_REG3 {
438 regulator-always-on;
439 regulator-boot-on;
440 regulator-min-microvolt = <900000>;
441 regulator-max-microvolt = <900000>;
442 regulator-name = "vdda0v9_pmu";
443 regulator-state-mem {
444 regulator-on-in-suspend;
445 regulator-suspend-microvolt = <900000>;
446 };
447 };
448
449 vccio_acodec: LDO_REG4 {
450 regulator-always-on;
451 regulator-boot-on;
452 regulator-min-microvolt = <3300000>;
453 regulator-max-microvolt = <3300000>;
454 regulator-name = "vccio_acodec";
455 regulator-state-mem {
456 regulator-off-in-suspend;
457 };
458 };
459
460 vccio_sd: LDO_REG5 {
461 regulator-always-on;
462 regulator-boot-on;
463 regulator-min-microvolt = <1800000>;
464 regulator-max-microvolt = <3300000>;
465 regulator-name = "vccio_sd";
466 regulator-state-mem {
467 regulator-off-in-suspend;
468 };
469 };
470
471 vcc3v3_pmu: LDO_REG6 {
472 regulator-always-on;
473 regulator-boot-on;
474 regulator-min-microvolt = <3300000>;
475 regulator-max-microvolt = <3300000>;
476 regulator-name = "vcc3v3_pmu";
477 regulator-state-mem {
478 regulator-on-in-suspend;
479 regulator-suspend-microvolt = <3300000>;
480 };
481 };
482
483 vcc_1v8: LDO_REG7 {
484 regulator-always-on;
485 regulator-boot-on;
486 regulator-min-microvolt = <1800000>;
487 regulator-max-microvolt = <1800000>;
488 regulator-name = "vcc_1v8";
489 regulator-state-mem {
490 regulator-off-in-suspend;
491 };
492 };
493
494 vcc1v8_dvp: LDO_REG8 {
495 regulator-always-on;
496 regulator-boot-on;
497 regulator-min-microvolt = <1800000>;
498 regulator-max-microvolt = <1800000>;
499 regulator-name = "vcc1v8_dvp";
500 regulator-state-mem {
501 regulator-off-in-suspend;
502 };
503 };
504
505 vcc2v8_dvp: LDO_REG9 {
506 regulator-always-on;
507 regulator-boot-on;
508 regulator-min-microvolt = <2800000>;
509 regulator-max-microvolt = <2800000>;
510 regulator-name = "vcc2v8_dvp";
511 regulator-state-mem {
512 regulator-off-in-suspend;
513 };
514 };
515
516 dcdc_boost: BOOST {
517 regulator-always-on;
518 regulator-boot-on;
519 regulator-min-microvolt = <5000000>;
520 regulator-max-microvolt = <5000000>;
521 regulator-name = "boost";
522 regulator-state-mem {
523 regulator-off-in-suspend;
524 };
525 };
526
527 otg_switch: OTG_SWITCH {
528 regulator-name = "otg_switch";
529 regulator-state-mem {
530 regulator-off-in-suspend;
531 };
532 };
533 };
534 };
535 };
536
537 /* i2c3 is exposed on con40
538 * pin 3 - i2c3_sda_m0, pullup to vcc_3v3
539 * pin 5 - i2c3_scl_m0, pullup to vcc_3v3
540 */
541 &i2c3 {
542 status = "okay";
543 };
544
545 &i2s0_8ch {
546 status = "okay";
547 };
548
549 &i2s1_8ch {
550 pinctrl-names = "default";
551 pinctrl-0 = <&i2s1m0_sclktx
552 &i2s1m0_lrcktx
553 &i2s1m0_sdi0
554 &i2s1m0_sdo0>;
555 rockchip,trcm-sync-tx-only;
556 status = "okay";
557 };
558
559 &mdio1 {
560 rgmii_phy1: ethernet-phy@0 {
561 compatible = "ethernet-phy-ieee802.3-c22";
562 reg = <0>;
563 };
564 };
565
566 &pcie2x1 {
567 pinctrl-names = "default";
568 pinctrl-0 = <&pcie_reset_h>;
569 reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
570 vpcie3v3-supply = <&vcc3v3_pcie_p>;
571 status = "okay";
572 };
573
574 &pinctrl {
575 bt {
576 bt_enable_h: bt-enable-h {
577 rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
578 };
579
580 bt_host_wake_l: bt-host-wake-l {
581 rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
582 };
583
584 bt_wake_l: bt-wake-l {
585 rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
586 };
587 };
588
589 fan {
590 fan_en_h: fan-en-h {
591 rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
592 };
593 };
594
595 leds {
596 work_led_enable_h: work-led-enable-h {
597 rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
598 };
599
600 diy_led_enable_h: diy-led-enable-h {
601 rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
602 };
603 };
604
605 pcie {
606 pcie_enable_h: pcie-enable-h {
607 rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
608 };
609
610 pcie_reset_h: pcie-reset-h {
611 rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
612 };
613 };
614
615 pmic {
616 pmic_int_l: pmic-int-l {
617 rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
618 };
619 };
620
621 usb2 {
622 vcc5v0_usb20_host_en: vcc5v0-usb20-host-en {
623 rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
624 };
625 };
626
627 sdio-pwrseq {
628 wifi_enable_h: wifi-enable-h {
629 rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
630 };
631 };
632
633 vcc_sd {
634 vcc_sd_h: vcc-sd-h {
635 rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
636 };
637 };
638 };
639
640 &pmu_io_domains {
641 pmuio1-supply = <&vcc3v3_pmu>;
642 pmuio2-supply = <&vcc3v3_pmu>;
643 vccio1-supply = <&vccio_acodec>;
644 vccio2-supply = <&vcc_1v8>;
645 vccio3-supply = <&vccio_sd>;
646 vccio4-supply = <&vcc_1v8>;
647 vccio5-supply = <&vcc_3v3>;
648 vccio6-supply = <&vcc1v8_dvp>;
649 vccio7-supply = <&vcc_3v3>;
650 status = "okay";
651 };
652
653 &sdhci {
654 bus-width = <8>;
655 mmc-hs200-1_8v;
656 non-removable;
657 vmmc-supply = <&vcc_3v3>;
658 vqmmc-supply = <&vcc_1v8>;
659 status = "okay";
660 };
661
662 &sdmmc0 {
663 bus-width = <4>;
664 cap-sd-highspeed;
665 cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
666 disable-wp;
667 pinctrl-names = "default";
668 pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
669 sd-uhs-sdr104;
670 vmmc-supply = <&vcc3v3_sd>;
671 vqmmc-supply = <&vccio_sd>;
672 status = "okay";
673 };
674
675 &sdmmc1 {
676 bus-width = <4>;
677 cap-sd-highspeed;
678 cap-sdio-irq;
679 keep-power-in-suspend;
680 mmc-pwrseq = <&sdio_pwrseq>;
681 non-removable;
682 pinctrl-names = "default";
683 pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
684 sd-uhs-sdr104;
685 vmmc-supply = <&vcc_wl>;
686 vqmmc-supply = <&vcc_1v8>;
687 status = "okay";
688 };
689
690 &sfc {
691 pinctrl-0 = <&fspi_pins>;
692 pinctrl-names = "default";
693 #address-cells = <1>;
694 #size-cells = <0>;
695 status = "disabled";
696
697 flash@0 {
698 compatible = "jedec,spi-nor";
699 reg = <0>;
700 spi-max-frequency = <24000000>;
701 spi-rx-bus-width = <4>;
702 spi-tx-bus-width = <1>;
703 };
704 };
705
706 /* spdif is exposed on con40 pin 18 */
707 &spdif {
708 status = "okay";
709 };
710
711 /* spi1 is exposed on con40
712 * pin 11 - spi1_mosi_m1
713 * pin 13 - spi1_miso_m1
714 * pin 15 - spi1_clk_m1
715 * pin 17 - spi1_cs0_m1
716 */
717 &spi1 {
718 pinctrl-names = "default";
719 pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>;
720 };
721
722 &tsadc {
723 /* tshut mode 0:CRU 1:GPIO */
724 rockchip,hw-tshut-mode = <1>;
725 /* tshut polarity 0:LOW 1:HIGH */
726 rockchip,hw-tshut-polarity = <0>;
727 status = "okay";
728 };
729
730 /* uart0 is exposed on con40
731 * pin 12 - uart0_tx
732 * pin 14 - uart0_rx
733 */
734 &uart0 {
735 pinctrl-names = "default";
736 pinctrl-0 = <&uart0_xfer>;
737 status = "okay";
738 };
739
740 &uart1 {
741 dma-names = "tx", "rx";
742 pinctrl-names = "default";
743 pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
744 status = "okay";
745 uart-has-rtscts;
746
747 bluetooth {
748 compatible = "brcm,bcm43438-bt";
749 clocks = <&rk817 1>;
750 clock-names = "lpo";
751 host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
752 device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
753 shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
754 pinctrl-names = "default";
755 pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
756 vbat-supply = <&vcc_sys>;
757 vddio-supply = <&vcca1v8_pmu>;
758 max-speed = <3000000>;
759 };
760 };
761
762 /* uart2 is exposed on con40
763 * pin 8 - uart2_tx_m0_debug
764 * pin 10 - uart2_rx_m0_debug
765 */
766 &uart2 {
767 status = "okay";
768 };
769
770 &usb_host0_ehci {
771 status = "okay";
772 };
773
774 &usb_host0_ohci {
775 status = "okay";
776 };
777
778 &usb_host1_ehci {
779 status = "okay";
780 };
781
782 &usb_host1_ohci {
783 status = "okay";
784 };
785
786 &usb_host0_xhci {
787 dr_mode = "host";
788 status = "okay";
789 };
790
791 /* usb3 controller is muxed with sata1 */
792 &usb_host1_xhci {
793 status = "okay";
794 };
795
796 &usb2phy0 {
797 status = "okay";
798 };
799
800 &usb2phy0_host {
801 phy-supply = <&vcc5v0_usb20_host>;
802 status = "okay";
803 };
804
805 &usb2phy0_otg {
806 phy-supply = <&vcc5v0_usb20_otg>;
807 status = "okay";
808 };
809
810 &usb2phy1 {
811 status = "okay";
812 };
813
814 &usb2phy1_host {
815 phy-supply = <&vcc5v0_usb20_host>;
816 status = "okay";
817 };
818
819 &usb2phy1_otg {
820 phy-supply = <&vcc5v0_usb20_host>;
821 status = "okay";
822 };
823
824 &vop {
825 assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
826 assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
827 status = "okay";
828 };
829
830 &vop_mmu {
831 status = "okay";
832 };
833
834 &vp0 {
835 vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
836 reg = <ROCKCHIP_VOP2_EP_HDMI0>;
837 remote-endpoint = <&hdmi_in_vp0>;
838 };
839 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.