1 // SPDX-License-Identifier: GPL-2.0-only OR MIT
2 /*
3 * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
4 *
5 * Design Files: https://www.ti.com/lit/zip/SPRR466
6 * TRM: https://www.ti.com/lit/zip/spruj52
7 */
8
9 /dts-v1/;
10
11 #include <dt-bindings/net/ti-dp83867.h>
12 #include <dt-bindings/gpio/gpio.h>
13 #include "k3-j784s4.dtsi"
14
15 / {
16 compatible = "ti,am69-sk", "ti,j784s4";
17 model = "Texas Instruments AM69 SK";
18
19 chosen {
20 stdout-path = "serial2:115200n8";
21 };
22
23 aliases {
24 serial0 = &wkup_uart0;
25 serial1 = &mcu_uart0;
26 serial2 = &main_uart8;
27 mmc0 = &main_sdhci0;
28 mmc1 = &main_sdhci1;
29 i2c0 = &wkup_i2c0;
30 i2c3 = &main_i2c0;
31 ethernet0 = &mcu_cpsw_port1;
32 };
33
34 memory@80000000 {
35 device_type = "memory";
36 bootph-all;
37 /* 32G RAM */
38 reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
39 <0x00000008 0x80000000 0x00000007 0x80000000>;
40 };
41
42 reserved_memory: reserved-memory {
43 #address-cells = <2>;
44 #size-cells = <2>;
45 ranges;
46
47 secure_ddr: optee@9e800000 {
48 reg = <0x00 0x9e800000 0x00 0x01800000>;
49 no-map;
50 };
51
52 mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
53 compatible = "shared-dma-pool";
54 reg = <0x00 0xa0000000 0x00 0x100000>;
55 no-map;
56 };
57
58 mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
59 compatible = "shared-dma-pool";
60 reg = <0x00 0xa0100000 0x00 0xf00000>;
61 no-map;
62 };
63
64 mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
65 compatible = "shared-dma-pool";
66 reg = <0x00 0xa1000000 0x00 0x100000>;
67 no-map;
68 };
69
70 mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
71 compatible = "shared-dma-pool";
72 reg = <0x00 0xa1100000 0x00 0xf00000>;
73 no-map;
74 };
75
76 main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
77 compatible = "shared-dma-pool";
78 reg = <0x00 0xa2000000 0x00 0x100000>;
79 no-map;
80 };
81
82 main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
83 compatible = "shared-dma-pool";
84 reg = <0x00 0xa2100000 0x00 0xf00000>;
85 no-map;
86 };
87
88 main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
89 compatible = "shared-dma-pool";
90 reg = <0x00 0xa3000000 0x00 0x100000>;
91 no-map;
92 };
93
94 main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
95 compatible = "shared-dma-pool";
96 reg = <0x00 0xa3100000 0x00 0xf00000>;
97 no-map;
98 };
99
100 main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
101 compatible = "shared-dma-pool";
102 reg = <0x00 0xa4000000 0x00 0x100000>;
103 no-map;
104 };
105
106 main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
107 compatible = "shared-dma-pool";
108 reg = <0x00 0xa4100000 0x00 0xf00000>;
109 no-map;
110 };
111
112 main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
113 compatible = "shared-dma-pool";
114 reg = <0x00 0xa5000000 0x00 0x100000>;
115 no-map;
116 };
117
118 main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
119 compatible = "shared-dma-pool";
120 reg = <0x00 0xa5100000 0x00 0xf00000>;
121 no-map;
122 };
123
124 main_r5fss2_core0_dma_memory_region: r5f-dma-memory@a6000000 {
125 compatible = "shared-dma-pool";
126 reg = <0x00 0xa6000000 0x00 0x100000>;
127 no-map;
128 };
129
130 main_r5fss2_core0_memory_region: r5f-memory@a6100000 {
131 compatible = "shared-dma-pool";
132 reg = <0x00 0xa6100000 0x00 0xf00000>;
133 no-map;
134 };
135
136 main_r5fss2_core1_dma_memory_region: r5f-dma-memory@a7000000 {
137 compatible = "shared-dma-pool";
138 reg = <0x00 0xa7000000 0x00 0x100000>;
139 no-map;
140 };
141
142 main_r5fss2_core1_memory_region: r5f-memory@a7100000 {
143 compatible = "shared-dma-pool";
144 reg = <0x00 0xa7100000 0x00 0xf00000>;
145 no-map;
146 };
147
148 c71_0_dma_memory_region: c71-dma-memory@a8000000 {
149 compatible = "shared-dma-pool";
150 reg = <0x00 0xa8000000 0x00 0x100000>;
151 no-map;
152 };
153
154 c71_0_memory_region: c71-memory@a8100000 {
155 compatible = "shared-dma-pool";
156 reg = <0x00 0xa8100000 0x00 0xf00000>;
157 no-map;
158 };
159
160 c71_1_dma_memory_region: c71-dma-memory@a9000000 {
161 compatible = "shared-dma-pool";
162 reg = <0x00 0xa9000000 0x00 0x100000>;
163 no-map;
164 };
165
166 c71_1_memory_region: c71-memory@a9100000 {
167 compatible = "shared-dma-pool";
168 reg = <0x00 0xa9100000 0x00 0xf00000>;
169 no-map;
170 };
171
172 c71_2_dma_memory_region: c71-dma-memory@aa000000 {
173 compatible = "shared-dma-pool";
174 reg = <0x00 0xaa000000 0x00 0x100000>;
175 no-map;
176 };
177
178 c71_2_memory_region: c71-memory@aa100000 {
179 compatible = "shared-dma-pool";
180 reg = <0x00 0xaa100000 0x00 0xf00000>;
181 no-map;
182 };
183
184 c71_3_dma_memory_region: c71-dma-memory@ab000000 {
185 compatible = "shared-dma-pool";
186 reg = <0x00 0xab000000 0x00 0x100000>;
187 no-map;
188 };
189
190 c71_3_memory_region: c71-memory@ab100000 {
191 compatible = "shared-dma-pool";
192 reg = <0x00 0xab100000 0x00 0xf00000>;
193 no-map;
194 };
195 };
196
197 vusb_main: regulator-vusb-main5v0 {
198 /* USB MAIN INPUT 5V DC */
199 compatible = "regulator-fixed";
200 regulator-name = "vusb-main5v0";
201 regulator-min-microvolt = <5000000>;
202 regulator-max-microvolt = <5000000>;
203 regulator-always-on;
204 regulator-boot-on;
205 };
206
207 vsys_5v0: regulator-vsys5v0 {
208 /* Output of LM61460 */
209 compatible = "regulator-fixed";
210 regulator-name = "vsys_5v0";
211 regulator-min-microvolt = <5000000>;
212 regulator-max-microvolt = <5000000>;
213 vin-supply = <&vusb_main>;
214 regulator-always-on;
215 regulator-boot-on;
216 };
217
218 vsys_3v3: regulator-vsys3v3 {
219 /* Output of LM5143 */
220 compatible = "regulator-fixed";
221 regulator-name = "vsys_3v3";
222 regulator-min-microvolt = <3300000>;
223 regulator-max-microvolt = <3300000>;
224 vin-supply = <&vusb_main>;
225 regulator-always-on;
226 regulator-boot-on;
227 };
228
229 vdd_mmc1: regulator-sd {
230 /* Output of TPS22918 */
231 compatible = "regulator-fixed";
232 regulator-name = "vdd_mmc1";
233 regulator-min-microvolt = <3300000>;
234 regulator-max-microvolt = <3300000>;
235 regulator-boot-on;
236 enable-active-high;
237 vin-supply = <&vsys_3v3>;
238 gpio = <&exp1 2 GPIO_ACTIVE_HIGH>;
239 };
240
241 vdd_sd_dv: regulator-tlv71033 {
242 /* Output of TLV71033 */
243 compatible = "regulator-gpio";
244 regulator-name = "tlv71033";
245 pinctrl-names = "default";
246 pinctrl-0 = <&vdd_sd_dv_pins_default>;
247 regulator-min-microvolt = <1800000>;
248 regulator-max-microvolt = <3300000>;
249 regulator-boot-on;
250 vin-supply = <&vsys_5v0>;
251 gpios = <&main_gpio0 49 GPIO_ACTIVE_HIGH>;
252 states = <1800000 0x0>,
253 <3300000 0x1>;
254 };
255
256 dp0_pwr_3v3: regulator-dp0-pwr {
257 compatible = "regulator-fixed";
258 regulator-name = "dp0-pwr";
259 regulator-min-microvolt = <3300000>;
260 regulator-max-microvolt = <3300000>;
261 pinctrl-names = "default";
262 pinctrl-0 = <&dp_pwr_en_pins_default>;
263 gpio = <&main_gpio0 4 0>; /* DP0_3V3 _EN */
264 enable-active-high;
265 };
266
267 dp0: connector-dp0 {
268 compatible = "dp-connector";
269 label = "DP0";
270 type = "full-size";
271 dp-pwr-supply = <&dp0_pwr_3v3>;
272
273 port {
274 dp0_connector_in: endpoint {
275 remote-endpoint = <&dp0_out>;
276 };
277 };
278 };
279
280 connector-hdmi {
281 compatible = "hdmi-connector";
282 label = "hdmi";
283 type = "a";
284 pinctrl-names = "default";
285 pinctrl-0 = <&hdmi_hpd_pins_default>;
286 ddc-i2c-bus = <&mcu_i2c1>;
287 hpd-gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>; /* HDMI_HPD */
288
289 port {
290 hdmi_connector_in: endpoint {
291 remote-endpoint = <&tfp410_out>;
292 };
293 };
294 };
295
296 bridge-dvi {
297 compatible = "ti,tfp410";
298 pinctrl-names = "default";
299 pinctrl-0 = <&hdmi_pdn_pins_default>;
300 powerdown-gpios = <&wkup_gpio0 14 GPIO_ACTIVE_LOW>; /* HDMI_PDn */
301 ti,deskew = <0>;
302
303 ports {
304 #address-cells = <1>;
305 #size-cells = <0>;
306
307 port@0 {
308 reg = <0>;
309
310 tfp410_in: endpoint {
311 remote-endpoint = <&dpi1_out0>;
312 pclk-sample = <1>;
313 };
314 };
315
316 port@1 {
317 reg = <1>;
318
319 tfp410_out: endpoint {
320 remote-endpoint = <&hdmi_connector_in>;
321 };
322 };
323 };
324 };
325
326 csi_mux: mux-controller {
327 compatible = "gpio-mux";
328 #mux-state-cells = <1>;
329 mux-gpios = <&exp2 1 GPIO_ACTIVE_HIGH>;
330 idle-state = <0>;
331 };
332
333 transceiver1: can-phy0 {
334 compatible = "ti,tcan1042";
335 #phy-cells = <0>;
336 max-bitrate = <5000000>;
337 };
338
339 transceiver2: can-phy1 {
340 compatible = "ti,tcan1042";
341 #phy-cells = <0>;
342 max-bitrate = <5000000>;
343 };
344
345 transceiver3: can-phy2 {
346 compatible = "ti,tcan1042";
347 #phy-cells = <0>;
348 max-bitrate = <5000000>;
349 };
350
351 transceiver4: can-phy3 {
352 compatible = "ti,tcan1042";
353 #phy-cells = <0>;
354 max-bitrate = <5000000>;
355 };
356
357 };
358
359 &main_pmx0 {
360 bootph-all;
361 main_uart8_pins_default: main-uart8-default-pins {
362 bootph-all;
363 pinctrl-single,pins = <
364 J784S4_IOPAD(0x0d0, PIN_INPUT, 11) /* (AP38) SPI0_CS1.UART8_RXD */
365 J784S4_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AN38) SPI0_CLK.UART8_TXD */
366 >;
367 };
368
369 main_i2c0_pins_default: main-i2c0-default-pins {
370 pinctrl-single,pins = <
371 J784S4_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AN36) I2C0_SCL */
372 J784S4_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AP37) I2C0_SDA */
373 >;
374 };
375
376 main_i2c1_pins_default: main-i2c1-default-pins {
377 pinctrl-single,pins = <
378 J784S4_IOPAD(0x0ac, PIN_INPUT_PULLUP, 13) /* (AE34) MCASP0_AXR15.I2C1_SCL */
379 J784S4_IOPAD(0x0b0, PIN_INPUT_PULLUP, 13) /* (AL33) MCASP1_AXR3.I2C1_SDA */
380 >;
381 };
382
383 main_mmc1_pins_default: main-mmc1-default-pins {
384 bootph-all;
385 pinctrl-single,pins = <
386 J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */
387 J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */
388 J784S4_IOPAD(0x100, PIN_INPUT, 0) /* (No Pin) MMC1_CLKLB */
389 J784S4_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA33) MMC1_DAT0 */
390 J784S4_IOPAD(0x0f8, PIN_INPUT, 0) /* (AB34) MMC1_DAT1 */
391 J784S4_IOPAD(0x0f4, PIN_INPUT, 0) /* (AA32) MMC1_DAT2 */
392 J784S4_IOPAD(0x0f0, PIN_INPUT, 0) /* (AC38) MMC1_DAT3 */
393 J784S4_IOPAD(0x0e8, PIN_INPUT, 8) /* (AR38) TIMER_IO0.MMC1_SDCD */
394 >;
395 };
396
397 vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
398 pinctrl-single,pins = <
399 J784S4_IOPAD(0x0C4, PIN_INPUT, 7) /* (AD36) ECAP0_IN_APWM_OUT.GPIO0_49 */
400 >;
401 };
402
403 rpi_header_gpio0_pins_default: rpi-header-gpio0-default-pins {
404 pinctrl-single,pins = <
405 J784S4_IOPAD(0x0BC, PIN_INPUT, 7) /* (AD33) MCASP1_AFSX.GPIO0_47 */
406 J784S4_IOPAD(0x06C, PIN_INPUT, 7) /* (AJ37) MCASP4_AFSX.GPIO0_27 */
407 J784S4_IOPAD(0x0B4, PIN_INPUT, 7) /* (AL34) MCASP1_AXR4.GPIO0_45 */
408 J784S4_IOPAD(0x0C0, PIN_INPUT, 7) /* (AD38) MCASP1_AXR0.GPIO0_48 */
409 J784S4_IOPAD(0x00C, PIN_INPUT, 7) /* (AF33) MCAN13_TX.GPIO0_3 */
410 J784S4_IOPAD(0x0B8, PIN_INPUT, 7) /* (AC34) MCASP1_ACLKX.GPIO0_46 */
411 J784S4_IOPAD(0x090, PIN_INPUT, 7) /* (AC35) MCASP0_AXR8.GPIO0_36 */
412 J784S4_IOPAD(0x0A8, PIN_INPUT, 7) /* (AF34) MCASP0_AXR14.GPIO0_42 */
413 J784S4_IOPAD(0x0A4, PIN_INPUT, 7) /* (AJ36) MCASP0_AXR13.GPIO0_41 */
414 J784S4_IOPAD(0x034, PIN_INPUT, 7) /* (AJ34) PMIC_WAKE0n.GPIO0_13 */
415 J784S4_IOPAD(0x0CC, PIN_INPUT, 7) /* (AM37) SPI0_CS0.GPIO0_51 */
416 J784S4_IOPAD(0x08C, PIN_INPUT, 7) /* (AE35) MCASP0_AXR7.GPIO0_35 */
417 J784S4_IOPAD(0x008, PIN_INPUT, 7) /* (AJ33) MCAN12_RX.GPIO0_2 */
418 J784S4_IOPAD(0x004, PIN_INPUT, 7) /* (AG36) MCAN12_TX.GPIO0_1 */
419 >;
420 };
421
422 dp0_pins_default: dp0-default-pins {
423 pinctrl-single,pins = <
424 J784S4_IOPAD(0x014, PIN_INPUT, 13) /* (AG33) MCAN14_TX.DP0_HPD */
425 >;
426 };
427
428 dp_pwr_en_pins_default: dp-pwr-en-default-pins {
429 pinctrl-single,pins = <
430 J784S4_IOPAD(0x010, PIN_INPUT, 7) /* (AH33) MCAN13_RX.GPIO0_4 */
431 >;
432 };
433
434 dss_vout0_pins_default: dss-vout0-default-pins {
435 pinctrl-single,pins = <
436 J784S4_IOPAD(0x074, PIN_OUTPUT, 2) /* (AC33) MCAN2_TX.VOUT0_DATA0 */
437 J784S4_IOPAD(0x070, PIN_OUTPUT, 2) /* (AH38) MCAN1_RX.VOUT0_DATA1 */
438 J784S4_IOPAD(0x07c, PIN_OUTPUT, 2) /* (AJ38) MCASP0_AXR3.VOUT0_DATA2 */
439 J784S4_IOPAD(0x068, PIN_OUTPUT, 2) /* (AE38) MCAN0_RX.VOUT0_DATA3 */
440 J784S4_IOPAD(0x064, PIN_OUTPUT, 2) /* (AF38) MCAN0_TX.VOUT0_DATA4 */
441 J784S4_IOPAD(0x060, PIN_OUTPUT, 2) /* (AE36) MCASP2_AXR1.VOUT0_DATA5 */
442 J784S4_IOPAD(0x05c, PIN_OUTPUT, 2) /* (AC36) MCASP2_AXR0.VOUT0_DATA6 */
443 J784S4_IOPAD(0x058, PIN_OUTPUT, 2) /* (AE37) MCASP2_AFSX.VOUT0_DATA7 */
444 J784S4_IOPAD(0x054, PIN_OUTPUT, 2) /* (AD37) MCASP2_ACLKX.VOUT0_DATA8 */
445 J784S4_IOPAD(0x050, PIN_OUTPUT, 2) /* (AC37) MCASP1_AXR2.VOUT0_DATA9 */
446 J784S4_IOPAD(0x04c, PIN_OUTPUT, 2) /* (AC32) MCASP1_AXR1.VOUT0_DATA10 */
447 J784S4_IOPAD(0x048, PIN_OUTPUT, 2) /* (AK33) MCASP0_AXR2.VOUT0_DATA11 */
448 J784S4_IOPAD(0x044, PIN_OUTPUT, 2) /* (AG37) MCASP0_AXR1.VOUT0_DATA12 */
449 J784S4_IOPAD(0x040, PIN_OUTPUT, 2) /* (AF37) MCASP0_AXR0.VOUT0_DATA13 */
450 J784S4_IOPAD(0x03c, PIN_OUTPUT, 2) /* (AK38) MCASP0_AFSX.VOUT0_DATA14 */
451 J784S4_IOPAD(0x038, PIN_OUTPUT, 2) /* (AK35) MCASP0_ACLKX.VOUT0_DATA15 */
452 J784S4_IOPAD(0x0c8, PIN_OUTPUT, 2) /* (AJ32) EXT_REFCLK1.VOUT0_DATA16 */
453 J784S4_IOPAD(0x030, PIN_OUTPUT, 2) /* (AK37) GPIO0_12.VOUT0_DATA17 */
454 J784S4_IOPAD(0x02c, PIN_OUTPUT, 2) /* (AL32) GPIO0_11.VOUT0_DATA18 */
455 J784S4_IOPAD(0x028, PIN_OUTPUT, 2) /* (AE33) MCAN16_RX.VOUT0_DATA19 */
456 J784S4_IOPAD(0x024, PIN_OUTPUT, 2) /* (AH34) MCAN16_TX.VOUT0_DATA20 */
457 J784S4_IOPAD(0x020, PIN_OUTPUT, 2) /* (AJ35) MCAN15_RX.VOUT0_DATA21 */
458 J784S4_IOPAD(0x01c, PIN_OUTPUT, 2) /* (AG34) MCAN15_TX.VOUT0_DATA22 */
459 J784S4_IOPAD(0x018, PIN_OUTPUT, 2) /* (AK36) MCAN14_RX.VOUT0_DATA23 */
460 J784S4_IOPAD(0x084, PIN_OUTPUT, 2) /* (AG38) MCASP0_AXR5.VOUT0_DE */
461 J784S4_IOPAD(0x080, PIN_OUTPUT, 2) /* (AK34) MCASP0_AXR4.VOUT0_HSYNC */
462 J784S4_IOPAD(0x078, PIN_OUTPUT, 2) /* (AH37) MCAN2_RX.VOUT0_PCLK */
463 J784S4_IOPAD(0x088, PIN_OUTPUT, 2) /* (AF36) MCASP0_AXR6.VOUT0_VSYNC */
464 >;
465 };
466
467 hdmi_hpd_pins_default: hdmi-hpd-default-pins {
468 pinctrl-single,pins = <
469 J784S4_IOPAD(0x000, PIN_INPUT, 7) /* (AN35) EXTINTN.GPIO0_0 */
470 >;
471 };
472
473 main_mcan6_pins_default: main-mcan6-default-pins {
474 pinctrl-single,pins = <
475 J784S4_IOPAD(0x098, PIN_INPUT, 0) /* (AH36) MCAN6_RX */
476 J784S4_IOPAD(0x094, PIN_OUTPUT, 0) /* (AG35) MCAN6_TX */
477 >;
478 };
479
480 main_mcan7_pins_default: main-mcan7-default-pins {
481 pinctrl-single,pins = <
482 J784S4_IOPAD(0x0A0, PIN_INPUT, 0) /* (AD34) MCAN7_RX */
483 J784S4_IOPAD(0x09C, PIN_OUTPUT, 0) /* (AF35) MCAN7_TX */
484 >;
485 };
486
487 };
488
489 &wkup_pmx0 {
490 bootph-all;
491 mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
492 pinctrl-single,pins = <
493 J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK */
494 J784S4_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (A32) MCU_OSPI0_CSn0 */
495 J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B33) MCU_OSPI0_D0 */
496 J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B32) MCU_OSPI0_D1 */
497 J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (C33) MCU_OSPI0_D2 */
498 J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (C35) MCU_OSPI0_D3 */
499 J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D33) MCU_OSPI0_D4 */
500 J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D34) MCU_OSPI0_D5 */
501 J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (E34) MCU_OSPI0_D6 */
502 J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (E33) MCU_OSPI0_D7 */
503 J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */
504 >;
505 };
506 };
507
508 &wkup_pmx2 {
509 bootph-all;
510 pmic_irq_pins_default: pmic-irq-default-pins {
511 pinctrl-single,pins = <
512 /* (AA37) MCU_ADC1_AIN4.WKUP_GPIO0_83 */
513 J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 7)
514 >;
515 };
516
517 wkup_uart0_pins_default: wkup-uart0-default-pins {
518 bootph-all;
519 pinctrl-single,pins = <
520 J784S4_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_UART0_CTSn */
521 J784S4_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (L36) WKUP_UART0_RTSn */
522 J784S4_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
523 J784S4_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (K34) WKUP_UART0_TXD */
524 >;
525 };
526
527 wkup_i2c0_pins_default: wkup-i2c0-default-pins {
528 bootph-all;
529 pinctrl-single,pins = <
530 J784S4_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
531 J784S4_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
532 >;
533 };
534
535 mcu_uart0_pins_default: mcu-uart0-default-pins {
536 bootph-all;
537 pinctrl-single,pins = <
538 J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (K38) WKUP_GPIO0_13.MCU_UART0_RXD */
539 J784S4_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (J37) WKUP_GPIO0_12.MCU_UART0_TXD */
540 >;
541 };
542
543 mcu_i2c0_pins_default: mcu-i2c0-default-pins {
544 pinctrl-single,pins = <
545 J784S4_WKUP_IOPAD(0x0a0, PIN_INPUT_PULLUP, 0) /* (M35) MCU_I2C0_SCL */
546 J784S4_WKUP_IOPAD(0x0a4, PIN_INPUT_PULLUP, 0) /* (G34) MCU_I2C0_SDA */
547 >;
548 };
549
550 mcu_cpsw_pins_default: mcu-cpsw-default-pins {
551 pinctrl-single,pins = <
552 J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */
553 J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */
554 J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */
555 J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */
556 J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */
557 J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */
558 J784S4_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */
559 J784S4_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */
560 J784S4_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */
561 J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */
562 J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */
563 J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */
564 >;
565 };
566
567 mcu_mdio_pins_default: mcu-mdio-default-pins {
568 pinctrl-single,pins = <
569 J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */
570 J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */
571 >;
572 };
573
574 mcu_rpi_hdr1_gpio0_pins_default: mcu-rpi-hdr1-gpio0-default-pins {
575 pinctrl-single,pins = <
576 J784S4_WKUP_IOPAD(0x118, PIN_INPUT, 7) /* (N34) WKUP_GPIO0_66 */
577 J784S4_WKUP_IOPAD(0x05c, PIN_INPUT, 7) /* (J34) WKUP_GPIO0_1 */
578 J784S4_WKUP_IOPAD(0x060, PIN_INPUT, 7) /* (J35) WKUP_GPIO0_2 */
579 J784S4_WKUP_IOPAD(0x058, PIN_INPUT, 7) /* (H38) WKUP_GPIO0_0 */
580 J784S4_WKUP_IOPAD(0x0b8, PIN_INPUT, 7) /* (M37) WKUP_GPIO0_56 */
581 J784S4_WKUP_IOPAD(0x114, PIN_INPUT, 7) /* (M36) WKUP_GPIO0_57 */
582 J784S4_WKUP_IOPAD(0x094, PIN_INPUT, 7) /* (K37) WKUP_GPIO0_15 */
583 J784S4_WKUP_IOPAD(0x064, PIN_INPUT, 7) /* (J36) WKUP_GPIO0_3 */
584 J784S4_WKUP_IOPAD(0x11c, PIN_INPUT, 7) /* (M34) WKUP_GPIO0_67 */
585 >;
586 };
587
588 mcu_i2c1_pins_default: mcu-i2c1-default-pins {
589 pinctrl-single,pins = <
590 /* (L35) WKUP_GPIO0_8.MCU_I2C1_SCL */
591 J784S4_WKUP_IOPAD(0x078, PIN_INPUT_PULLUP, 0)
592 /* (L34) WKUP_GPIO0_9.MCU_I2C1_SDA */
593 J784S4_WKUP_IOPAD(0x07c, PIN_INPUT_PULLUP, 0)
594 >;
595 };
596
597 hdmi_pdn_pins_default: hdmi-pdn-default-pins {
598 pinctrl-single,pins = <
599 J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 7) /* (H37) WKUP_GPIO0_14 */
600 >;
601 };
602
603 mcu_mcan0_pins_default: mcu-mcan0-default-pins {
604 pinctrl-single,pins = <
605 J784S4_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (F38) MCU_MCAN0_RX */
606 J784S4_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (K33) MCU_MCAN0_TX */
607 >;
608 };
609
610 mcu_mcan1_pins_default: mcu-mcan1-default-pins {
611 pinctrl-single,pins = <
612 J784S4_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (K36) WKUP_GPIO0_5.MCU_MCAN1_RX */
613 J784S4_WKUP_IOPAD(0x068, PIN_OUTPUT, 0)/* (H35) WKUP_GPIO0_4.MCU_MCAN1_TX */
614 >;
615 };
616
617 };
618
619 &wkup_pmx3 {
620 mcu_rpi_hdr2_gpio0_pins_default: mcu-rpi-hdr2-gpio0-default-pins {
621 pinctrl-single,pins = <
622 J784S4_WKUP_IOPAD(0x0, PIN_INPUT, 7) /* (M33) WKUP_GPIO0_49 */
623 >;
624 };
625 };
626
627 &mailbox0_cluster0 {
628 status = "okay";
629 interrupts = <436>;
630 mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
631 ti,mbox-rx = <0 0 0>;
632 ti,mbox-tx = <1 0 0>;
633 };
634
635 mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
636 ti,mbox-rx = <2 0 0>;
637 ti,mbox-tx = <3 0 0>;
638 };
639 };
640
641 &mailbox0_cluster1 {
642 status = "okay";
643 interrupts = <432>;
644 mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
645 ti,mbox-rx = <0 0 0>;
646 ti,mbox-tx = <1 0 0>;
647 };
648
649 mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
650 ti,mbox-rx = <2 0 0>;
651 ti,mbox-tx = <3 0 0>;
652 };
653 };
654
655 &mailbox0_cluster2 {
656 status = "okay";
657 interrupts = <428>;
658 mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
659 ti,mbox-rx = <0 0 0>;
660 ti,mbox-tx = <1 0 0>;
661 };
662
663 mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
664 ti,mbox-rx = <2 0 0>;
665 ti,mbox-tx = <3 0 0>;
666 };
667 };
668
669 &mailbox0_cluster3 {
670 status = "okay";
671 interrupts = <424>;
672 mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 {
673 ti,mbox-rx = <0 0 0>;
674 ti,mbox-tx = <1 0 0>;
675 };
676
677 mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 {
678 ti,mbox-rx = <2 0 0>;
679 ti,mbox-tx = <3 0 0>;
680 };
681 };
682
683 &mailbox0_cluster4 {
684 status = "okay";
685 interrupts = <420>;
686 mbox_c71_0: mbox-c71-0 {
687 ti,mbox-rx = <0 0 0>;
688 ti,mbox-tx = <1 0 0>;
689 };
690
691 mbox_c71_1: mbox-c71-1 {
692 ti,mbox-rx = <2 0 0>;
693 ti,mbox-tx = <3 0 0>;
694 };
695 };
696
697 &mailbox0_cluster5 {
698 status = "okay";
699 interrupts = <416>;
700 mbox_c71_2: mbox-c71-2 {
701 ti,mbox-rx = <0 0 0>;
702 ti,mbox-tx = <1 0 0>;
703 };
704
705 mbox_c71_3: mbox-c71-3 {
706 ti,mbox-rx = <2 0 0>;
707 ti,mbox-tx = <3 0 0>;
708 };
709 };
710
711 &wkup_uart0 {
712 /* Firmware usage */
713 status = "reserved";
714 pinctrl-names = "default";
715 pinctrl-0 = <&wkup_uart0_pins_default>;
716 };
717
718 &wkup_i2c0 {
719 bootph-all;
720 status = "okay";
721 pinctrl-names = "default";
722 pinctrl-0 = <&wkup_i2c0_pins_default>;
723 clock-frequency = <400000>;
724
725 eeprom@51 {
726 /* AT24C512C-MAHM-T */
727 compatible = "atmel,24c512";
728 reg = <0x51>;
729 };
730
731 tps659413: pmic@48 {
732 compatible = "ti,tps6594-q1";
733 reg = <0x48>;
734 system-power-controller;
735 pinctrl-names = "default";
736 pinctrl-0 = <&pmic_irq_pins_default>;
737 interrupt-parent = <&wkup_gpio0>;
738 interrupts = <83 IRQ_TYPE_EDGE_FALLING>;
739 gpio-controller;
740 #gpio-cells = <2>;
741 ti,primary-pmic;
742 buck12-supply = <&vsys_3v3>;
743 buck3-supply = <&vsys_3v3>;
744 buck4-supply = <&vsys_3v3>;
745 buck5-supply = <&vsys_3v3>;
746 ldo1-supply = <&vsys_3v3>;
747 ldo2-supply = <&vsys_3v3>;
748 ldo3-supply = <&vsys_3v3>;
749 ldo4-supply = <&vsys_3v3>;
750
751 regulators {
752 bucka12: buck12 {
753 regulator-name = "vdd_ddr_1v1";
754 regulator-min-microvolt = <1100000>;
755 regulator-max-microvolt = <1100000>;
756 regulator-boot-on;
757 regulator-always-on;
758 };
759
760 bucka3: buck3 {
761 regulator-name = "vdd_ram_0v85";
762 regulator-min-microvolt = <850000>;
763 regulator-max-microvolt = <850000>;
764 regulator-boot-on;
765 regulator-always-on;
766 };
767
768 bucka4: buck4 {
769 regulator-name = "vdd_io_1v8";
770 regulator-min-microvolt = <1800000>;
771 regulator-max-microvolt = <1800000>;
772 regulator-boot-on;
773 regulator-always-on;
774 };
775
776 bucka5: buck5 {
777 regulator-name = "vdd_mcu_0v85";
778 regulator-min-microvolt = <850000>;
779 regulator-max-microvolt = <850000>;
780 regulator-boot-on;
781 regulator-always-on;
782 };
783
784 ldoa1: ldo1 {
785 regulator-name = "vdd_mcuio_1v8";
786 regulator-min-microvolt = <1800000>;
787 regulator-max-microvolt = <1800000>;
788 regulator-boot-on;
789 regulator-always-on;
790 };
791
792 ldoa2: ldo2 {
793 regulator-name = "vdd_mcuio_3v3";
794 regulator-min-microvolt = <3300000>;
795 regulator-max-microvolt = <3300000>;
796 regulator-boot-on;
797 regulator-always-on;
798 };
799
800 ldoa3: ldo3 {
801 regulator-name = "vds_dll_0v8";
802 regulator-min-microvolt = <800000>;
803 regulator-max-microvolt = <800000>;
804 regulator-boot-on;
805 regulator-always-on;
806 };
807
808 ldoa4: ldo4 {
809 regulator-name = "vda_mcu_1v8";
810 regulator-min-microvolt = <1800000>;
811 regulator-max-microvolt = <1800000>;
812 regulator-boot-on;
813 regulator-always-on;
814 };
815 };
816 };
817
818 tps62873a: regulator@40 {
819 compatible = "ti,tps62873";
820 reg = <0x40>;
821 bootph-pre-ram;
822 regulator-name = "VDD_CPU_AVS";
823 regulator-min-microvolt = <600000>;
824 regulator-max-microvolt = <900000>;
825 regulator-boot-on;
826 regulator-always-on;
827 };
828
829 tps62873b: regulator@43 {
830 compatible = "ti,tps62873";
831 reg = <0x43>;
832 regulator-name = "VDD_CORE_0V8";
833 regulator-min-microvolt = <760000>;
834 regulator-max-microvolt = <840000>;
835 regulator-boot-on;
836 regulator-always-on;
837 };
838 };
839
840 &wkup_gpio0 {
841 status = "okay";
842 pinctrl-names = "default";
843 pinctrl-0 = <&mcu_rpi_hdr1_gpio0_pins_default>, <&mcu_rpi_hdr2_gpio0_pins_default>;
844 };
845
846 &mcu_uart0 {
847 bootph-all;
848 status = "okay";
849 pinctrl-names = "default";
850 pinctrl-0 = <&mcu_uart0_pins_default>;
851 };
852
853 &mcu_i2c0 {
854 status = "okay";
855 pinctrl-names = "default";
856 pinctrl-0 = <&mcu_i2c0_pins_default>;
857 clock-frequency = <400000>;
858 };
859
860 &main_uart8 {
861 bootph-all;
862 status = "okay";
863 pinctrl-names = "default";
864 pinctrl-0 = <&main_uart8_pins_default>;
865 };
866
867 &main_i2c0 {
868 status = "okay";
869 pinctrl-names = "default";
870 pinctrl-0 = <&main_i2c0_pins_default>;
871 clock-frequency = <400000>;
872
873 exp1: gpio@21 {
874 compatible = "ti,tca6416";
875 reg = <0x21>;
876 gpio-controller;
877 #gpio-cells = <2>;
878 gpio-line-names = "BOARDID_EEPROM_WP", "CAN_STB", "GPIO_uSD_PWR_EN",
879 "IO_EXP_MCU_RGMII_RST#", "IO_EXP_PCIe0_4L_PERST#",
880 "IO_EXP_PCIe1_M.2_RTSz", "IO_EXP_PCIe3_M.2_RTSz",
881 "PM_INA_BUS_EN", "ENET1_EXP_PWRDN", "EXP1_ENET_RSTz",
882 "ENET1_I2CMUX_SEL", "PCIe0_CLKREQ#", "PCIe1_M.2_CLKREQ#",
883 "PCIe3_M2_CLKREQ#", "PCIe0_PRSNT2#_1", "PCIe0_PRSNT2#_2";
884 };
885 };
886
887 &main_i2c1 {
888 pinctrl-names = "default";
889 pinctrl-0 = <&main_i2c1_pins_default>;
890 clock-frequency = <400000>;
891 status = "okay";
892
893 exp2: gpio@21 {
894 compatible = "ti,tca6408";
895 reg = <0x21>;
896 gpio-controller;
897 #gpio-cells = <2>;
898 gpio-line-names = "CSI_VIO_SEL", "CSI_MUX_SEL_2", "CSI2_RSTz",
899 "IO_EXP_CAM0_GPIO1", "IO_EXP_CAM1_GPIO1";
900 };
901
902 i2c-mux@70 {
903 compatible = "nxp,pca9543";
904 #address-cells = <1>;
905 #size-cells = <0>;
906 reg = <0x70>;
907
908 cam0_i2c: i2c@0 {
909 #address-cells = <1>;
910 #size-cells = <0>;
911 reg = <0>;
912 };
913
914 cam1_i2c: i2c@1 {
915 #address-cells = <1>;
916 #size-cells = <0>;
917 reg = <1>;
918 };
919
920 };
921 };
922
923 &main_sdhci0 {
924 bootph-all;
925 /* eMMC */
926 status = "okay";
927 non-removable;
928 ti,driver-strength-ohm = <50>;
929 disable-wp;
930 };
931
932 &main_sdhci1 {
933 bootph-all;
934 /* SD card */
935 status = "okay";
936 pinctrl-0 = <&main_mmc1_pins_default>;
937 pinctrl-names = "default";
938 disable-wp;
939 vmmc-supply = <&vdd_mmc1>;
940 vqmmc-supply = <&vdd_sd_dv>;
941 };
942
943 &main_gpio0 {
944 status = "okay";
945 pinctrl-names = "default";
946 pinctrl-0 = <&rpi_header_gpio0_pins_default>;
947 };
948
949 &mcu_cpsw {
950 status = "okay";
951 pinctrl-names = "default";
952 pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
953 };
954
955 &davinci_mdio {
956 mcu_phy0: ethernet-phy@0 {
957 reg = <0>;
958 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
959 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
960 ti,min-output-impedance;
961 };
962 };
963
964 &mcu_cpsw_port1 {
965 status = "okay";
966 phy-mode = "rgmii-rxid";
967 phy-handle = <&mcu_phy0>;
968 };
969
970 &mcu_r5fss0_core0 {
971 mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
972 memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
973 <&mcu_r5fss0_core0_memory_region>;
974 };
975
976 &mcu_r5fss0_core1 {
977 mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
978 memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
979 <&mcu_r5fss0_core1_memory_region>;
980 };
981
982 &main_r5fss0 {
983 ti,cluster-mode = <0>;
984 };
985
986 &main_r5fss1 {
987 ti,cluster-mode = <0>;
988 };
989
990 /* Timers are used by Remoteproc firmware */
991 &main_timer0 {
992 status = "reserved";
993 };
994
995 &main_timer1 {
996 status = "reserved";
997 };
998
999 &main_timer2 {
1000 status = "reserved";
1001 };
1002
1003 &main_timer3 {
1004 status = "reserved";
1005 };
1006
1007 &main_timer4 {
1008 status = "reserved";
1009 };
1010
1011 &main_timer5 {
1012 status = "reserved";
1013 };
1014
1015 &main_timer6 {
1016 status = "reserved";
1017 };
1018
1019 &main_timer7 {
1020 status = "reserved";
1021 };
1022
1023 &main_timer8 {
1024 status = "reserved";
1025 };
1026
1027 &main_timer9 {
1028 status = "reserved";
1029 };
1030
1031 &main_r5fss2 {
1032 ti,cluster-mode = <0>;
1033 };
1034
1035 &main_r5fss0_core0 {
1036 mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
1037 memory-region = <&main_r5fss0_core0_dma_memory_region>,
1038 <&main_r5fss0_core0_memory_region>;
1039 };
1040
1041 &main_r5fss0_core1 {
1042 mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
1043 memory-region = <&main_r5fss0_core1_dma_memory_region>,
1044 <&main_r5fss0_core1_memory_region>;
1045 };
1046
1047 &main_r5fss1_core0 {
1048 mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
1049 memory-region = <&main_r5fss1_core0_dma_memory_region>,
1050 <&main_r5fss1_core0_memory_region>;
1051 };
1052
1053 &main_r5fss1_core1 {
1054 mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
1055 memory-region = <&main_r5fss1_core1_dma_memory_region>,
1056 <&main_r5fss1_core1_memory_region>;
1057 };
1058
1059 &main_r5fss2_core0 {
1060 mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>;
1061 memory-region = <&main_r5fss2_core0_dma_memory_region>,
1062 <&main_r5fss2_core0_memory_region>;
1063 };
1064
1065 &main_r5fss2_core1 {
1066 mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>;
1067 memory-region = <&main_r5fss2_core1_dma_memory_region>,
1068 <&main_r5fss2_core1_memory_region>;
1069 };
1070
1071 &c71_0 {
1072 status = "okay";
1073 mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
1074 memory-region = <&c71_0_dma_memory_region>,
1075 <&c71_0_memory_region>;
1076 };
1077
1078 &c71_1 {
1079 status = "okay";
1080 mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
1081 memory-region = <&c71_1_dma_memory_region>,
1082 <&c71_1_memory_region>;
1083 };
1084
1085 &c71_2 {
1086 status = "okay";
1087 mboxes = <&mailbox0_cluster5 &mbox_c71_2>;
1088 memory-region = <&c71_2_dma_memory_region>,
1089 <&c71_2_memory_region>;
1090 };
1091
1092 &c71_3 {
1093 status = "okay";
1094 mboxes = <&mailbox0_cluster5 &mbox_c71_3>;
1095 memory-region = <&c71_3_dma_memory_region>,
1096 <&c71_3_memory_region>;
1097 };
1098
1099 &wkup_gpio_intr {
1100 status = "okay";
1101 };
1102
1103 &mcu_i2c1 {
1104 status = "okay";
1105 pinctrl-names = "default";
1106 pinctrl-0 = <&mcu_i2c1_pins_default>;
1107 clock-frequency = <100000>;
1108 };
1109
1110 &serdes_refclk {
1111 status = "okay";
1112 clock-frequency = <100000000>;
1113 };
1114
1115 &dss {
1116 status = "okay";
1117 pinctrl-names = "default";
1118 pinctrl-0 = <&dss_vout0_pins_default>;
1119 assigned-clocks = <&k3_clks 218 2>,
1120 <&k3_clks 218 5>;
1121 assigned-clock-parents = <&k3_clks 218 3>,
1122 <&k3_clks 218 7>;
1123 };
1124
1125 &serdes_wiz4 {
1126 status = "okay";
1127 };
1128
1129 &serdes4 {
1130 status = "okay";
1131 serdes4_dp_link: phy@0 {
1132 reg = <0>;
1133 cdns,num-lanes = <4>;
1134 #phy-cells = <0>;
1135 cdns,phy-type = <PHY_TYPE_DP>;
1136 resets = <&serdes_wiz4 1>, <&serdes_wiz4 2>,
1137 <&serdes_wiz4 3>, <&serdes_wiz4 4>;
1138 };
1139 };
1140
1141 &mhdp {
1142 status = "okay";
1143 pinctrl-names = "default";
1144 pinctrl-0 = <&dp0_pins_default>;
1145 phys = <&serdes4_dp_link>;
1146 phy-names = "dpphy";
1147 };
1148
1149 &dss_ports {
1150 #address-cells = <1>;
1151 #size-cells = <0>;
1152
1153 /* DP */
1154 port@0 {
1155 reg = <0>;
1156
1157 dpi0_out: endpoint {
1158 remote-endpoint = <&dp0_in>;
1159 };
1160 };
1161
1162 /* HDMI */
1163 port@1 {
1164 reg = <1>;
1165
1166 dpi1_out0: endpoint {
1167 remote-endpoint = <&tfp410_in>;
1168 };
1169 };
1170 };
1171
1172 &dp0_ports {
1173
1174 port@0 {
1175 reg = <0>;
1176
1177 dp0_in: endpoint {
1178 remote-endpoint = <&dpi0_out>;
1179 };
1180 };
1181
1182 port@4 {
1183 reg = <4>;
1184
1185 dp0_out: endpoint {
1186 remote-endpoint = <&dp0_connector_in>;
1187 };
1188 };
1189 };
1190
1191 &mcu_mcan0 {
1192 status = "okay";
1193 pinctrl-names = "default";
1194 pinctrl-0 = <&mcu_mcan0_pins_default>;
1195 phys = <&transceiver1>;
1196 };
1197
1198 &mcu_mcan1 {
1199 status = "okay";
1200 pinctrl-names = "default";
1201 pinctrl-0 = <&mcu_mcan1_pins_default>;
1202 phys = <&transceiver2>;
1203 };
1204
1205 &main_mcan6 {
1206 status = "okay";
1207 pinctrl-names = "default";
1208 pinctrl-0 = <&main_mcan6_pins_default>;
1209 phys = <&transceiver3>;
1210 };
1211
1212 &main_mcan7 {
1213 status = "okay";
1214 pinctrl-names = "default";
1215 pinctrl-0 = <&main_mcan7_pins_default>;
1216 phys = <&transceiver4>;
1217 };
1218
1219 &ospi0 {
1220 status = "okay";
1221 pinctrl-names = "default";
1222 pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
1223
1224 flash@0 {
1225 compatible = "jedec,spi-nor";
1226 reg = <0x0>;
1227 spi-tx-bus-width = <8>;
1228 spi-rx-bus-width = <8>;
1229 spi-max-frequency = <25000000>;
1230 cdns,tshsl-ns = <60>;
1231 cdns,tsd2d-ns = <60>;
1232 cdns,tchsh-ns = <60>;
1233 cdns,tslch-ns = <60>;
1234 cdns,read-delay = <4>;
1235
1236 partitions {
1237 bootph-all;
1238 compatible = "fixed-partitions";
1239 #address-cells = <1>;
1240 #size-cells = <1>;
1241
1242 partition@0 {
1243 label = "ospi.tiboot3";
1244 reg = <0x0 0x100000>;
1245 };
1246
1247 partition@100000 {
1248 label = "ospi.tispl";
1249 reg = <0x100000 0x200000>;
1250 };
1251
1252 partition@300000 {
1253 label = "ospi.u-boot";
1254 reg = <0x300000 0x400000>;
1255 };
1256
1257 partition@700000 {
1258 label = "ospi.env";
1259 reg = <0x700000 0x40000>;
1260 };
1261
1262 partition@740000 {
1263 label = "ospi.env.backup";
1264 reg = <0x740000 0x40000>;
1265 };
1266
1267 partition@800000 {
1268 label = "ospi.rootfs";
1269 reg = <0x800000 0x37c0000>;
1270 };
1271
1272 partition@3fc0000 {
1273 bootph-pre-ram;
1274 label = "ospi.phypattern";
1275 reg = <0x3fc0000 0x40000>;
1276 };
1277 };
1278 };
1279 };
1280
1281 &serdes_ln_ctrl {
1282 idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>, <J784S4_SERDES0_LANE1_PCIE1_LANE1>,
1283 <J784S4_SERDES0_LANE2_PCIE3_LANE0>, <J784S4_SERDES0_LANE3_USB>,
1284 <J784S4_SERDES1_LANE0_PCIE0_LANE0>, <J784S4_SERDES1_LANE1_PCIE0_LANE1>,
1285 <J784S4_SERDES1_LANE2_PCIE0_LANE2>, <J784S4_SERDES1_LANE3_PCIE0_LANE3>;
1286 };
1287
1288 &serdes_wiz0 {
1289 status = "okay";
1290 };
1291
1292 &serdes0 {
1293 status = "okay";
1294
1295 serdes0_pcie_link: phy@0 {
1296 reg = <0>;
1297 cdns,num-lanes = <3>;
1298 #phy-cells = <0>;
1299 cdns,phy-type = <PHY_TYPE_PCIE>;
1300 resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>, <&serdes_wiz0 3>;
1301 };
1302 };
1303
1304 &serdes_wiz1 {
1305 status = "okay";
1306 };
1307
1308 &serdes1 {
1309 status = "okay";
1310
1311 serdes1_pcie_link: phy@0 {
1312 reg = <0>;
1313 cdns,num-lanes = <4>;
1314 #phy-cells = <0>;
1315 cdns,phy-type = <PHY_TYPE_PCIE>;
1316 resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>, <&serdes_wiz1 3>, <&serdes_wiz1 4>;
1317 };
1318 };
1319
1320 &pcie0_rc {
1321 status = "okay";
1322 reset-gpios = <&exp1 4 GPIO_ACTIVE_HIGH>;
1323 phys = <&serdes1_pcie_link>;
1324 phy-names = "pcie-phy";
1325 };
1326
1327 &pcie1_rc {
1328 status = "okay";
1329 reset-gpios = <&exp1 5 GPIO_ACTIVE_HIGH>;
1330 phys = <&serdes0_pcie_link>;
1331 phy-names = "pcie-phy";
1332 num-lanes = <2>;
1333 };
1334
1335 &pcie3_rc {
1336 status = "okay";
1337 reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
1338 phys = <&serdes0_pcie_link>;
1339 phy-names = "pcie-phy";
1340 num-lanes = <1>;
1341 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.