1 /*
2 * P1025 RDB Device Tree Source stub (no addresses or top-level ranges)
3 *
4 * Copyright 2011 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 * * Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * * Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * * Neither the name of Freescale Semiconductor nor the
14 * names of its contributors may be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35 &lbc {
36 nor@0,0 {
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
40 reg = <0x0 0x0 0x1000000>;
41 bank-width = <2>;
42 device-width = <1>;
43
44 partition@0 {
45 /* This location must not be altered */
46 /* 256KB for Vitesse 7385 Switch firmware */
47 reg = <0x0 0x00040000>;
48 label = "NOR Vitesse-7385 Firmware";
49 read-only;
50 };
51
52 partition@40000 {
53 /* 256KB for DTB Image */
54 reg = <0x00040000 0x00040000>;
55 label = "NOR DTB Image";
56 };
57
58 partition@80000 {
59 /* 3.5 MB for Linux Kernel Image */
60 reg = <0x00080000 0x00380000>;
61 label = "NOR Linux Kernel Image";
62 };
63
64 partition@400000 {
65 /* 11MB for JFFS2 based Root file System */
66 reg = <0x00400000 0x00b00000>;
67 label = "NOR JFFS2 Root File System";
68 };
69
70 partition@f00000 {
71 /* This location must not be altered */
72 /* 512KB for u-boot Bootloader Image */
73 /* 512KB for u-boot Environment Variables */
74 reg = <0x00f00000 0x00100000>;
75 label = "NOR U-Boot Image";
76 read-only;
77 };
78 };
79
80 nand@1,0 {
81 #address-cells = <1>;
82 #size-cells = <1>;
83 compatible = "fsl,p1025-fcm-nand",
84 "fsl,elbc-fcm-nand";
85 reg = <0x1 0x0 0x40000>;
86
87 partition@0 {
88 /* This location must not be altered */
89 /* 1MB for u-boot Bootloader Image */
90 reg = <0x0 0x00100000>;
91 label = "NAND U-Boot Image";
92 read-only;
93 };
94
95 partition@100000 {
96 /* 1MB for DTB Image */
97 reg = <0x00100000 0x00100000>;
98 label = "NAND DTB Image";
99 };
100
101 partition@200000 {
102 /* 4MB for Linux Kernel Image */
103 reg = <0x00200000 0x00400000>;
104 label = "NAND Linux Kernel Image";
105 };
106
107 partition@600000 {
108 /* 4MB for Compressed Root file System Image */
109 reg = <0x00600000 0x00400000>;
110 label = "NAND Compressed RFS Image";
111 };
112
113 partition@a00000 {
114 /* 7MB for JFFS2 based Root file System */
115 reg = <0x00a00000 0x00700000>;
116 label = "NAND JFFS2 Root File System";
117 };
118
119 partition@1100000 {
120 /* 15MB for JFFS2 based Root file System */
121 reg = <0x01100000 0x00f00000>;
122 label = "NAND Writable User area";
123 };
124 };
125
126 };
127
128 &soc {
129 i2c@3000 {
130 rtc@68 {
131 compatible = "dallas,ds1339";
132 reg = <0x68>;
133 };
134 };
135
136 spi@7000 {
137 flash@0 {
138 #address-cells = <1>;
139 #size-cells = <1>;
140 compatible = "spansion,s25sl12801", "jedec,spi-nor";
141 reg = <0>;
142 spi-max-frequency = <40000000>; /* input clock */
143
144 partition@u-boot {
145 /* 512KB for u-boot Bootloader Image */
146 reg = <0x0 0x00080000>;
147 label = "u-boot";
148 read-only;
149 };
150
151 partition@dtb {
152 /* 512KB for DTB Image */
153 reg = <0x00080000 0x00080000>;
154 label = "dtb";
155 };
156
157 partition@kernel {
158 /* 4MB for Linux Kernel Image */
159 reg = <0x00100000 0x00400000>;
160 label = "kernel";
161 };
162
163 partition@fs {
164 /* 4MB for Compressed RFS Image */
165 reg = <0x00500000 0x00400000>;
166 label = "file system";
167 };
168
169 partition@jffs-fs {
170 /* 7MB for JFFS2 based RFS */
171 reg = <0x00900000 0x00700000>;
172 label = "file system jffs2";
173 };
174 };
175 };
176
177 usb@22000 {
178 phy_type = "ulpi";
179 };
180
181 /* USB2 is shared with localbus, so it must be disabled
182 by default. We can't put 'status = "disabled";' here
183 since U-Boot doesn't clear the status property when
184 it enables USB2. OTOH, U-Boot does create a new node
185 when there isn't any. So, just comment it out.
186 usb@23000 {
187 phy_type = "ulpi";
188 };
189 */
190
191 mdio@24000 {
192 phy0: ethernet-phy@0 {
193 interrupt-parent = <&mpic>;
194 interrupts = <3 1>;
195 reg = <0x0>;
196 };
197
198 phy1: ethernet-phy@1 {
199 interrupt-parent = <&mpic>;
200 interrupts = <2 1>;
201 reg = <0x1>;
202 };
203
204 tbi0: tbi-phy@11 {
205 reg = <0x11>;
206 device_type = "tbi-phy";
207 };
208 };
209
210 mdio@25000 {
211 tbi1: tbi-phy@11 {
212 reg = <0x11>;
213 device_type = "tbi-phy";
214 };
215 };
216
217 mdio@26000 {
218 tbi2: tbi-phy@11 {
219 reg = <0x11>;
220 device_type = "tbi-phy";
221 };
222 };
223
224 enet0: ethernet@b0000 {
225 fixed-link = <1 1 1000 0 0>;
226 phy-connection-type = "rgmii-id";
227
228 };
229
230 enet1: ethernet@b1000 {
231 phy-handle = <&phy0>;
232 tbi-handle = <&tbi1>;
233 phy-connection-type = "sgmii";
234 };
235
236 enet2: ethernet@b2000 {
237 phy-handle = <&phy1>;
238 phy-connection-type = "rgmii-id";
239 };
240
241 par_io@e0100 {
242 #address-cells = <1>;
243 #size-cells = <1>;
244 reg = <0xe0100 0x60>;
245 ranges = <0x0 0xe0100 0x60>;
246 device_type = "par_io";
247 num-ports = <3>;
248 pio1: ucc_pin@1 {
249 pio-map = <
250 /* port pin dir open_drain assignment has_irq */
251 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
252 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
253 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */
254 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */
255 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */
256 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */
257 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */
258 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */
259 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */
260 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */
261 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */
262 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */
263 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */
264 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */
265 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */
266 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */
267 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */
268 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */
269 };
270
271 pio2: ucc_pin@2 {
272 pio-map = <
273 /* port pin dir open_drain assignment has_irq */
274 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
275 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
276 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */
277 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */
278 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */
279 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */
280 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */
281 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */
282 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */
283 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */
284 };
285
286 pio3: ucc_pin@3 {
287 pio-map = <
288 /* port pin dir open_drain assignment has_irq */
289 0x0 0x16 0x2 0x0 0x2 0x0 /* SER7_CD_B*/
290 0x0 0x12 0x2 0x0 0x2 0x0 /* SER7_CTS_B*/
291 0x0 0x13 0x1 0x0 0x2 0x0 /* SER7_RTS_B*/
292 0x0 0x14 0x2 0x0 0x2 0x0 /* SER7_RXD0*/
293 0x0 0x15 0x1 0x0 0x2 0x0>; /* SER7_TXD0*/
294 };
295
296 pio4: ucc_pin@4 {
297 pio-map = <
298 /* port pin dir open_drain assignment has_irq */
299 0x1 0x0 0x2 0x0 0x2 0x0 /* SER3_CD_B*/
300 0x0 0x1c 0x2 0x0 0x2 0x0 /* SER3_CTS_B*/
301 0x0 0x1d 0x1 0x0 0x2 0x0 /* SER3_RTS_B*/
302 0x0 0x1e 0x2 0x0 0x2 0x0 /* SER3_RXD0*/
303 0x0 0x1f 0x1 0x0 0x2 0x0>; /* SER3_TXD0*/
304 };
305 };
306 };
307
308 &qe {
309 serial2: ucc@2600 {
310 device_type = "serial";
311 compatible = "ucc_uart";
312 port-number = <0>;
313 rx-clock-name = "brg6";
314 tx-clock-name = "brg6";
315 pio-handle = <&pio3>;
316 };
317
318 serial3: ucc@2200 {
319 device_type = "serial";
320 compatible = "ucc_uart";
321 port-number = <1>;
322 rx-clock-name = "brg2";
323 tx-clock-name = "brg2";
324 pio-handle = <&pio4>;
325 };
326 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.