1 /*
2 * P3041DS Device Tree Source
3 *
4 * Copyright 2010 - 2015 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 * * Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * * Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * * Neither the name of Freescale Semiconductor nor the
14 * names of its contributors may be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35 /include/ "p3041si-pre.dtsi"
36
37 / {
38 model = "fsl,P3041DS";
39 compatible = "fsl,P3041DS";
40 #address-cells = <2>;
41 #size-cells = <2>;
42 interrupt-parent = <&mpic>;
43
44 aliases {
45 phy_rgmii_0 = &phy_rgmii_0;
46 phy_rgmii_1 = &phy_rgmii_1;
47 phy_sgmii_1c = &phy_sgmii_1c;
48 phy_sgmii_1d = &phy_sgmii_1d;
49 phy_sgmii_1e = &phy_sgmii_1e;
50 phy_sgmii_1f = &phy_sgmii_1f;
51 phy_xgmii_1 = &phy_xgmii_1;
52 phy_xgmii_2 = &phy_xgmii_2;
53 emi1_rgmii = &hydra_mdio_rgmii;
54 emi1_sgmii = &hydra_mdio_sgmii;
55 emi2_xgmii = &hydra_mdio_xgmii;
56 };
57
58 memory {
59 device_type = "memory";
60 };
61
62 reserved-memory {
63 #address-cells = <2>;
64 #size-cells = <2>;
65 ranges;
66
67 bman_fbpr: bman-fbpr {
68 size = <0 0x1000000>;
69 alignment = <0 0x1000000>;
70 };
71 qman_fqd: qman-fqd {
72 size = <0 0x400000>;
73 alignment = <0 0x400000>;
74 };
75 qman_pfdr: qman-pfdr {
76 size = <0 0x2000000>;
77 alignment = <0 0x2000000>;
78 };
79 };
80
81 dcsr: dcsr@f00000000 {
82 ranges = <0x00000000 0xf 0x00000000 0x01008000>;
83 };
84
85 bportals: bman-portals@ff4000000 {
86 ranges = <0x0 0xf 0xf4000000 0x200000>;
87 };
88
89 qportals: qman-portals@ff4200000 {
90 ranges = <0x0 0xf 0xf4200000 0x200000>;
91 };
92
93 soc: soc@ffe000000 {
94 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
95 reg = <0xf 0xfe000000 0 0x00001000>;
96 spi@110000 {
97 flash@0 {
98 #address-cells = <1>;
99 #size-cells = <1>;
100 compatible = "spansion,s25sl12801", "jedec,spi-nor";
101 reg = <0>;
102 spi-max-frequency = <35000000>; /* input clock */
103 partition@u-boot {
104 label = "u-boot";
105 reg = <0x00000000 0x00100000>;
106 read-only;
107 };
108 partition@kernel {
109 label = "kernel";
110 reg = <0x00100000 0x00500000>;
111 read-only;
112 };
113 partition@dtb {
114 label = "dtb";
115 reg = <0x00600000 0x00100000>;
116 read-only;
117 };
118 partition@fs {
119 label = "file system";
120 reg = <0x00700000 0x00900000>;
121 };
122 };
123 };
124
125 i2c@118100 {
126 eeprom@51 {
127 compatible = "atmel,24c256";
128 reg = <0x51>;
129 };
130 eeprom@52 {
131 compatible = "atmel,24c256";
132 reg = <0x52>;
133 };
134 };
135
136 i2c@119100 {
137 rtc@68 {
138 compatible = "dallas,ds3232";
139 reg = <0x68>;
140 interrupts = <0x1 0x1 0 0>;
141 };
142 ina220@40 {
143 compatible = "ti,ina220";
144 reg = <0x40>;
145 shunt-resistor = <1000>;
146 };
147 ina220@41 {
148 compatible = "ti,ina220";
149 reg = <0x41>;
150 shunt-resistor = <1000>;
151 };
152 ina220@44 {
153 compatible = "ti,ina220";
154 reg = <0x44>;
155 shunt-resistor = <1000>;
156 };
157 ina220@45 {
158 compatible = "ti,ina220";
159 reg = <0x45>;
160 shunt-resistor = <1000>;
161 };
162 adt7461@4c {
163 compatible = "adi,adt7461";
164 reg = <0x4c>;
165 };
166 };
167
168 fman@400000 {
169 ethernet@e0000 {
170 phy-handle = <&phy_sgmii_1c>;
171 phy-connection-type = "sgmii";
172 };
173
174 ethernet@e2000 {
175 phy-handle = <&phy_sgmii_1d>;
176 phy-connection-type = "sgmii";
177 };
178
179 ethernet@e4000 {
180 phy-handle = <&phy_sgmii_1e>;
181 phy-connection-type = "sgmii";
182 };
183
184 ethernet@e6000 {
185 phy-handle = <&phy_sgmii_1f>;
186 phy-connection-type = "sgmii";
187 };
188
189 ethernet@e8000 {
190 phy-handle = <&phy_rgmii_1>;
191 phy-connection-type = "rgmii";
192 };
193
194 ethernet@f0000 {
195 phy-handle = <&phy_xgmii_1>;
196 phy-connection-type = "xgmii";
197 };
198
199 hydra_mdio_xgmii: mdio@f1000 {
200 status = "disabled";
201
202 phy_xgmii_1: ethernet-phy@4 {
203 compatible = "ethernet-phy-ieee802.3-c45";
204 reg = <0x4>;
205 };
206
207 phy_xgmii_2: ethernet-phy@0 {
208 compatible = "ethernet-phy-ieee802.3-c45";
209 reg = <0x0>;
210 };
211 };
212 };
213 };
214
215 rio: rapidio@ffe0c0000 {
216 reg = <0xf 0xfe0c0000 0 0x11000>;
217
218 port1 {
219 ranges = <0 0 0xc 0x20000000 0 0x10000000>;
220 };
221 port2 {
222 ranges = <0 0 0xc 0x30000000 0 0x10000000>;
223 };
224 };
225
226 lbc: localbus@ffe124000 {
227 reg = <0xf 0xfe124000 0 0x1000>;
228 ranges = <0 0 0xf 0xe8000000 0x08000000
229 2 0 0xf 0xffa00000 0x00040000
230 3 0 0xf 0xffdf0000 0x00008000>;
231
232 flash@0,0 {
233 compatible = "cfi-flash";
234 reg = <0 0 0x08000000>;
235 bank-width = <2>;
236 device-width = <2>;
237 };
238
239 nand@2,0 {
240 #address-cells = <1>;
241 #size-cells = <1>;
242 compatible = "fsl,elbc-fcm-nand";
243 reg = <0x2 0x0 0x40000>;
244
245 partition@0 {
246 label = "NAND U-Boot Image";
247 reg = <0x0 0x02000000>;
248 read-only;
249 };
250
251 partition@2000000 {
252 label = "NAND Root File System";
253 reg = <0x02000000 0x10000000>;
254 };
255
256 partition@12000000 {
257 label = "NAND Compressed RFS Image";
258 reg = <0x12000000 0x08000000>;
259 };
260
261 partition@1a000000 {
262 label = "NAND Linux Kernel Image";
263 reg = <0x1a000000 0x04000000>;
264 };
265
266 partition@1e000000 {
267 label = "NAND DTB Image";
268 reg = <0x1e000000 0x01000000>;
269 };
270
271 partition@1f000000 {
272 label = "NAND Writable User area";
273 reg = <0x1f000000 0x21000000>;
274 };
275 };
276
277 board-control@3,0 {
278 #address-cells = <1>;
279 #size-cells = <1>;
280 compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis";
281 reg = <3 0 0x30>;
282 ranges = <0 3 0 0x30>;
283
284 mdio-mux-emi1 {
285 #address-cells = <1>;
286 #size-cells = <0>;
287 compatible = "mdio-mux-mmioreg", "mdio-mux";
288 mdio-parent-bus = <&mdio0>;
289 reg = <9 1>;
290 mux-mask = <0x78>;
291
292 hydra_mdio_rgmii: rgmii-mdio@8 {
293 #address-cells = <1>;
294 #size-cells = <0>;
295 reg = <8>;
296 status = "disabled";
297
298 phy_rgmii_0: ethernet-phy@0 {
299 reg = <0x0>;
300 };
301
302 phy_rgmii_1: ethernet-phy@1 {
303 reg = <0x1>;
304 };
305 };
306
307 hydra_mdio_sgmii: sgmii-mdio@28 {
308 #address-cells = <1>;
309 #size-cells = <0>;
310 reg = <0x28>;
311 status = "disabled";
312
313 phy_sgmii_1c: ethernet-phy@1c {
314 reg = <0x1c>;
315 };
316
317 phy_sgmii_1d: ethernet-phy@1d {
318 reg = <0x1d>;
319 };
320
321 phy_sgmii_1e: ethernet-phy@1e {
322 reg = <0x1e>;
323 };
324
325 phy_sgmii_1f: ethernet-phy@1f {
326 reg = <0x1f>;
327 };
328 };
329 };
330 };
331 };
332
333 pci0: pcie@ffe200000 {
334 reg = <0xf 0xfe200000 0 0x1000>;
335 ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
336 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
337 pcie@0 {
338 ranges = <0x02000000 0 0xe0000000
339 0x02000000 0 0xe0000000
340 0 0x20000000
341
342 0x01000000 0 0x00000000
343 0x01000000 0 0x00000000
344 0 0x00010000>;
345 };
346 };
347
348 pci1: pcie@ffe201000 {
349 reg = <0xf 0xfe201000 0 0x1000>;
350 ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
351 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
352 pcie@0 {
353 ranges = <0x02000000 0 0xe0000000
354 0x02000000 0 0xe0000000
355 0 0x20000000
356
357 0x01000000 0 0x00000000
358 0x01000000 0 0x00000000
359 0 0x00010000>;
360 };
361 };
362
363 pci2: pcie@ffe202000 {
364 reg = <0xf 0xfe202000 0 0x1000>;
365 ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
366 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
367 pcie@0 {
368 ranges = <0x02000000 0 0xe0000000
369 0x02000000 0 0xe0000000
370 0 0x20000000
371
372 0x01000000 0 0x00000000
373 0x01000000 0 0x00000000
374 0 0x00010000>;
375 };
376 };
377
378 pci3: pcie@ffe203000 {
379 reg = <0xf 0xfe203000 0 0x1000>;
380 ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
381 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
382 pcie@0 {
383 ranges = <0x02000000 0 0xe0000000
384 0x02000000 0 0xe0000000
385 0 0x20000000
386
387 0x01000000 0 0x00000000
388 0x01000000 0 0x00000000
389 0 0x00010000>;
390 };
391 };
392 };
393
394 /include/ "p3041si-post.dtsi"
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.