1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * tas5720.c - ALSA SoC Texas Instruments TAS5720 Mono Audio Amplifier
4 *
5 * Copyright (C)2015-2016 Texas Instruments Incorporated - https://www.ti.com
6 *
7 * Author: Andreas Dannenberg <dannenberg@ti.com>
8 */
9
10 #include <linux/module.h>
11 #include <linux/errno.h>
12 #include <linux/device.h>
13 #include <linux/i2c.h>
14 #include <linux/regmap.h>
15 #include <linux/slab.h>
16 #include <linux/regulator/consumer.h>
17 #include <linux/delay.h>
18
19 #include <sound/pcm.h>
20 #include <sound/pcm_params.h>
21 #include <sound/soc.h>
22 #include <sound/soc-dapm.h>
23 #include <sound/tlv.h>
24
25 #include "tas5720.h"
26
27 /* Define how often to check (and clear) the fault status register (in ms) */
28 #define TAS5720_FAULT_CHECK_INTERVAL 200
29
30 enum tas572x_type {
31 TAS5720,
32 TAS5720A_Q1,
33 TAS5722,
34 };
35
36 static const char * const tas5720_supply_names[] = {
37 "dvdd", /* Digital power supply. Connect to 3.3-V supply. */
38 "pvdd", /* Class-D amp and analog power supply (connected). */
39 };
40
41 #define TAS5720_NUM_SUPPLIES ARRAY_SIZE(tas5720_supply_names)
42
43 struct tas5720_data {
44 struct snd_soc_component *component;
45 struct regmap *regmap;
46 struct i2c_client *tas5720_client;
47 enum tas572x_type devtype;
48 struct regulator_bulk_data supplies[TAS5720_NUM_SUPPLIES];
49 struct delayed_work fault_check_work;
50 unsigned int last_fault;
51 };
52
53 static int tas5720_hw_params(struct snd_pcm_substream *substream,
54 struct snd_pcm_hw_params *params,
55 struct snd_soc_dai *dai)
56 {
57 struct snd_soc_component *component = dai->component;
58 unsigned int rate = params_rate(params);
59 bool ssz_ds;
60 int ret;
61
62 switch (rate) {
63 case 44100:
64 case 48000:
65 ssz_ds = false;
66 break;
67 case 88200:
68 case 96000:
69 ssz_ds = true;
70 break;
71 default:
72 dev_err(component->dev, "unsupported sample rate: %u\n", rate);
73 return -EINVAL;
74 }
75
76 ret = snd_soc_component_update_bits(component, TAS5720_DIGITAL_CTRL1_REG,
77 TAS5720_SSZ_DS, ssz_ds);
78 if (ret < 0) {
79 dev_err(component->dev, "error setting sample rate: %d\n", ret);
80 return ret;
81 }
82
83 return 0;
84 }
85
86 static int tas5720_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
87 {
88 struct snd_soc_component *component = dai->component;
89 u8 serial_format;
90 int ret;
91
92 if ((fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) != SND_SOC_DAIFMT_CBC_CFC) {
93 dev_vdbg(component->dev, "DAI clocking invalid\n");
94 return -EINVAL;
95 }
96
97 switch (fmt & (SND_SOC_DAIFMT_FORMAT_MASK |
98 SND_SOC_DAIFMT_INV_MASK)) {
99 case (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF):
100 /* 1st data bit occur one BCLK cycle after the frame sync */
101 serial_format = TAS5720_SAIF_I2S;
102 break;
103 case (SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_NB_NF):
104 /*
105 * Note that although the TAS5720 does not have a dedicated DSP
106 * mode it doesn't care about the LRCLK duty cycle during TDM
107 * operation. Therefore we can use the device's I2S mode with
108 * its delaying of the 1st data bit to receive DSP_A formatted
109 * data. See device datasheet for additional details.
110 */
111 serial_format = TAS5720_SAIF_I2S;
112 break;
113 case (SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_NB_NF):
114 /*
115 * Similar to DSP_A, we can use the fact that the TAS5720 does
116 * not care about the LRCLK duty cycle during TDM to receive
117 * DSP_B formatted data in LEFTJ mode (no delaying of the 1st
118 * data bit).
119 */
120 serial_format = TAS5720_SAIF_LEFTJ;
121 break;
122 case (SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_NB_NF):
123 /* No delay after the frame sync */
124 serial_format = TAS5720_SAIF_LEFTJ;
125 break;
126 default:
127 dev_vdbg(component->dev, "DAI Format is not found\n");
128 return -EINVAL;
129 }
130
131 ret = snd_soc_component_update_bits(component, TAS5720_DIGITAL_CTRL1_REG,
132 TAS5720_SAIF_FORMAT_MASK,
133 serial_format);
134 if (ret < 0) {
135 dev_err(component->dev, "error setting SAIF format: %d\n", ret);
136 return ret;
137 }
138
139 return 0;
140 }
141
142 static int tas5720_set_dai_tdm_slot(struct snd_soc_dai *dai,
143 unsigned int tx_mask, unsigned int rx_mask,
144 int slots, int slot_width)
145 {
146 struct snd_soc_component *component = dai->component;
147 struct tas5720_data *tas5720 = snd_soc_component_get_drvdata(component);
148 unsigned int first_slot;
149 int ret;
150
151 if (!tx_mask) {
152 dev_err(component->dev, "tx masks must not be 0\n");
153 return -EINVAL;
154 }
155
156 /*
157 * Determine the first slot that is being requested. We will only
158 * use the first slot that is found since the TAS5720 is a mono
159 * amplifier.
160 */
161 first_slot = __ffs(tx_mask);
162
163 if (first_slot > 7) {
164 dev_err(component->dev, "slot selection out of bounds (%u)\n",
165 first_slot);
166 return -EINVAL;
167 }
168
169 /*
170 * Enable manual TDM slot selection (instead of I2C ID based).
171 * This is not applicable to TAS5720A-Q1.
172 */
173 switch (tas5720->devtype) {
174 case TAS5720A_Q1:
175 break;
176 default:
177 ret = snd_soc_component_update_bits(component, TAS5720_DIGITAL_CTRL1_REG,
178 TAS5720_TDM_CFG_SRC, TAS5720_TDM_CFG_SRC);
179 if (ret < 0)
180 goto error_snd_soc_component_update_bits;
181
182 /* Configure the TDM slot to process audio from */
183 ret = snd_soc_component_update_bits(component, TAS5720_DIGITAL_CTRL2_REG,
184 TAS5720_TDM_SLOT_SEL_MASK, first_slot);
185 if (ret < 0)
186 goto error_snd_soc_component_update_bits;
187 break;
188 }
189
190 /* Configure TDM slot width. This is only applicable to TAS5722. */
191 switch (tas5720->devtype) {
192 case TAS5722:
193 ret = snd_soc_component_update_bits(component, TAS5722_DIGITAL_CTRL2_REG,
194 TAS5722_TDM_SLOT_16B,
195 slot_width == 16 ?
196 TAS5722_TDM_SLOT_16B : 0);
197 if (ret < 0)
198 goto error_snd_soc_component_update_bits;
199 break;
200 default:
201 break;
202 }
203
204 return 0;
205
206 error_snd_soc_component_update_bits:
207 dev_err(component->dev, "error configuring TDM mode: %d\n", ret);
208 return ret;
209 }
210
211 static int tas5720_mute_soc_component(struct snd_soc_component *component, int mute)
212 {
213 struct tas5720_data *tas5720 = snd_soc_component_get_drvdata(component);
214 unsigned int reg, mask;
215 int ret;
216
217 switch (tas5720->devtype) {
218 case TAS5720A_Q1:
219 reg = TAS5720_Q1_VOLUME_CTRL_CFG_REG;
220 mask = TAS5720_Q1_MUTE;
221 break;
222 default:
223 reg = TAS5720_DIGITAL_CTRL2_REG;
224 mask = TAS5720_MUTE;
225 break;
226 }
227
228 ret = snd_soc_component_update_bits(component, reg, mask, mute ? mask : 0);
229 if (ret < 0) {
230 dev_err(component->dev, "error (un-)muting device: %d\n", ret);
231 return ret;
232 }
233
234 return 0;
235 }
236
237 static int tas5720_mute(struct snd_soc_dai *dai, int mute, int direction)
238 {
239 return tas5720_mute_soc_component(dai->component, mute);
240 }
241
242 static void tas5720_fault_check_work(struct work_struct *work)
243 {
244 struct tas5720_data *tas5720 = container_of(work, struct tas5720_data,
245 fault_check_work.work);
246 struct device *dev = tas5720->component->dev;
247 unsigned int curr_fault;
248 int ret;
249
250 ret = regmap_read(tas5720->regmap, TAS5720_FAULT_REG, &curr_fault);
251 if (ret < 0) {
252 dev_err(dev, "failed to read FAULT register: %d\n", ret);
253 goto out;
254 }
255
256 /* Check/handle all errors except SAIF clock errors */
257 curr_fault &= TAS5720_OCE | TAS5720_DCE | TAS5720_OTE;
258
259 /*
260 * Only flag errors once for a given occurrence. This is needed as
261 * the TAS5720 will take time clearing the fault condition internally
262 * during which we don't want to bombard the system with the same
263 * error message over and over.
264 */
265 if ((curr_fault & TAS5720_OCE) && !(tas5720->last_fault & TAS5720_OCE))
266 dev_crit(dev, "experienced an over current hardware fault\n");
267
268 if ((curr_fault & TAS5720_DCE) && !(tas5720->last_fault & TAS5720_DCE))
269 dev_crit(dev, "experienced a DC detection fault\n");
270
271 if ((curr_fault & TAS5720_OTE) && !(tas5720->last_fault & TAS5720_OTE))
272 dev_crit(dev, "experienced an over temperature fault\n");
273
274 /* Store current fault value so we can detect any changes next time */
275 tas5720->last_fault = curr_fault;
276
277 if (!curr_fault)
278 goto out;
279
280 /*
281 * Periodically toggle SDZ (shutdown bit) H->L->H to clear any latching
282 * faults as long as a fault condition persists. Always going through
283 * the full sequence no matter the first return value to minimizes
284 * chances for the device to end up in shutdown mode.
285 */
286 ret = regmap_write_bits(tas5720->regmap, TAS5720_POWER_CTRL_REG,
287 TAS5720_SDZ, 0);
288 if (ret < 0)
289 dev_err(dev, "failed to write POWER_CTRL register: %d\n", ret);
290
291 ret = regmap_write_bits(tas5720->regmap, TAS5720_POWER_CTRL_REG,
292 TAS5720_SDZ, TAS5720_SDZ);
293 if (ret < 0)
294 dev_err(dev, "failed to write POWER_CTRL register: %d\n", ret);
295
296 out:
297 /* Schedule the next fault check at the specified interval */
298 schedule_delayed_work(&tas5720->fault_check_work,
299 msecs_to_jiffies(TAS5720_FAULT_CHECK_INTERVAL));
300 }
301
302 static int tas5720_codec_probe(struct snd_soc_component *component)
303 {
304 struct tas5720_data *tas5720 = snd_soc_component_get_drvdata(component);
305 unsigned int device_id, expected_device_id;
306 int ret;
307
308 tas5720->component = component;
309
310 ret = regulator_bulk_enable(ARRAY_SIZE(tas5720->supplies),
311 tas5720->supplies);
312 if (ret != 0) {
313 dev_err(component->dev, "failed to enable supplies: %d\n", ret);
314 return ret;
315 }
316
317 /*
318 * Take a liberal approach to checking the device ID to allow the
319 * driver to be used even if the device ID does not match, however
320 * issue a warning if there is a mismatch.
321 */
322 ret = regmap_read(tas5720->regmap, TAS5720_DEVICE_ID_REG, &device_id);
323 if (ret < 0) {
324 dev_err(component->dev, "failed to read device ID register: %d\n",
325 ret);
326 goto probe_fail;
327 }
328
329 switch (tas5720->devtype) {
330 case TAS5720:
331 expected_device_id = TAS5720_DEVICE_ID;
332 break;
333 case TAS5720A_Q1:
334 expected_device_id = TAS5720A_Q1_DEVICE_ID;
335 break;
336 case TAS5722:
337 expected_device_id = TAS5722_DEVICE_ID;
338 break;
339 default:
340 dev_err(component->dev, "unexpected private driver data\n");
341 ret = -EINVAL;
342 goto probe_fail;
343 }
344
345 if (device_id != expected_device_id)
346 dev_warn(component->dev, "wrong device ID. expected: %u read: %u\n",
347 expected_device_id, device_id);
348
349 /* Set device to mute */
350 ret = tas5720_mute_soc_component(component, 1);
351 if (ret < 0)
352 goto error_snd_soc_component_update_bits;
353
354 /* Set Bit 7 in TAS5720_ANALOG_CTRL_REG to 1 for TAS5720A_Q1 */
355 switch (tas5720->devtype) {
356 case TAS5720A_Q1:
357 ret = snd_soc_component_update_bits(component, TAS5720_ANALOG_CTRL_REG,
358 TAS5720_Q1_RESERVED7_BIT,
359 TAS5720_Q1_RESERVED7_BIT);
360 break;
361 default:
362 break;
363 }
364 if (ret < 0)
365 goto error_snd_soc_component_update_bits;
366
367 /*
368 * Enter shutdown mode - our default when not playing audio - to
369 * minimize current consumption. On the TAS5720 there is no real down
370 * side doing so as all device registers are preserved and the wakeup
371 * of the codec is rather quick which we do using a dapm widget.
372 */
373 ret = snd_soc_component_update_bits(component, TAS5720_POWER_CTRL_REG,
374 TAS5720_SDZ, 0);
375 if (ret < 0)
376 goto error_snd_soc_component_update_bits;
377
378 INIT_DELAYED_WORK(&tas5720->fault_check_work, tas5720_fault_check_work);
379
380 return 0;
381
382 error_snd_soc_component_update_bits:
383 dev_err(component->dev, "error configuring device registers: %d\n", ret);
384
385 probe_fail:
386 regulator_bulk_disable(ARRAY_SIZE(tas5720->supplies),
387 tas5720->supplies);
388 return ret;
389 }
390
391 static void tas5720_codec_remove(struct snd_soc_component *component)
392 {
393 struct tas5720_data *tas5720 = snd_soc_component_get_drvdata(component);
394 int ret;
395
396 cancel_delayed_work_sync(&tas5720->fault_check_work);
397
398 ret = regulator_bulk_disable(ARRAY_SIZE(tas5720->supplies),
399 tas5720->supplies);
400 if (ret < 0)
401 dev_err(component->dev, "failed to disable supplies: %d\n", ret);
402 };
403
404 static int tas5720_dac_event(struct snd_soc_dapm_widget *w,
405 struct snd_kcontrol *kcontrol, int event)
406 {
407 struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
408 struct tas5720_data *tas5720 = snd_soc_component_get_drvdata(component);
409 int ret;
410
411 if (event & SND_SOC_DAPM_POST_PMU) {
412 /* Take TAS5720 out of shutdown mode */
413 ret = snd_soc_component_update_bits(component, TAS5720_POWER_CTRL_REG,
414 TAS5720_SDZ, TAS5720_SDZ);
415 if (ret < 0) {
416 dev_err(component->dev, "error waking component: %d\n", ret);
417 return ret;
418 }
419
420 /*
421 * Observe codec shutdown-to-active time. The datasheet only
422 * lists a nominal value however just use-it as-is without
423 * additional padding to minimize the delay introduced in
424 * starting to play audio (actually there is other setup done
425 * by the ASoC framework that will provide additional delays,
426 * so we should always be safe).
427 */
428 msleep(25);
429
430 /* Turn on TAS5720 periodic fault checking/handling */
431 tas5720->last_fault = 0;
432 schedule_delayed_work(&tas5720->fault_check_work,
433 msecs_to_jiffies(TAS5720_FAULT_CHECK_INTERVAL));
434 } else if (event & SND_SOC_DAPM_PRE_PMD) {
435 /* Disable TAS5720 periodic fault checking/handling */
436 cancel_delayed_work_sync(&tas5720->fault_check_work);
437
438 /* Place TAS5720 in shutdown mode to minimize current draw */
439 ret = snd_soc_component_update_bits(component, TAS5720_POWER_CTRL_REG,
440 TAS5720_SDZ, 0);
441 if (ret < 0) {
442 dev_err(component->dev, "error shutting down component: %d\n",
443 ret);
444 return ret;
445 }
446 }
447
448 return 0;
449 }
450
451 #ifdef CONFIG_PM
452 static int tas5720_suspend(struct snd_soc_component *component)
453 {
454 struct tas5720_data *tas5720 = snd_soc_component_get_drvdata(component);
455 int ret;
456
457 regcache_cache_only(tas5720->regmap, true);
458 regcache_mark_dirty(tas5720->regmap);
459
460 ret = regulator_bulk_disable(ARRAY_SIZE(tas5720->supplies),
461 tas5720->supplies);
462 if (ret < 0)
463 dev_err(component->dev, "failed to disable supplies: %d\n", ret);
464
465 return ret;
466 }
467
468 static int tas5720_resume(struct snd_soc_component *component)
469 {
470 struct tas5720_data *tas5720 = snd_soc_component_get_drvdata(component);
471 int ret;
472
473 ret = regulator_bulk_enable(ARRAY_SIZE(tas5720->supplies),
474 tas5720->supplies);
475 if (ret < 0) {
476 dev_err(component->dev, "failed to enable supplies: %d\n", ret);
477 return ret;
478 }
479
480 regcache_cache_only(tas5720->regmap, false);
481
482 ret = regcache_sync(tas5720->regmap);
483 if (ret < 0) {
484 dev_err(component->dev, "failed to sync regcache: %d\n", ret);
485 return ret;
486 }
487
488 return 0;
489 }
490 #else
491 #define tas5720_suspend NULL
492 #define tas5720_resume NULL
493 #endif
494
495 static bool tas5720_is_volatile_reg(struct device *dev, unsigned int reg)
496 {
497 switch (reg) {
498 case TAS5720_DEVICE_ID_REG:
499 case TAS5720_FAULT_REG:
500 return true;
501 default:
502 return false;
503 }
504 }
505
506 static const struct regmap_config tas5720_regmap_config = {
507 .reg_bits = 8,
508 .val_bits = 8,
509
510 .max_register = TAS5720_MAX_REG,
511 .cache_type = REGCACHE_RBTREE,
512 .volatile_reg = tas5720_is_volatile_reg,
513 };
514
515 static const struct regmap_config tas5720a_q1_regmap_config = {
516 .reg_bits = 8,
517 .val_bits = 8,
518
519 .max_register = TAS5720_MAX_REG,
520 .cache_type = REGCACHE_RBTREE,
521 .volatile_reg = tas5720_is_volatile_reg,
522 };
523
524 static const struct regmap_config tas5722_regmap_config = {
525 .reg_bits = 8,
526 .val_bits = 8,
527
528 .max_register = TAS5722_MAX_REG,
529 .cache_type = REGCACHE_RBTREE,
530 .volatile_reg = tas5720_is_volatile_reg,
531 };
532
533 /*
534 * DAC analog gain. There are four discrete values to select from, ranging
535 * from 19.2 dB to 26.3dB.
536 */
537 static const DECLARE_TLV_DB_RANGE(dac_analog_tlv,
538 0x0, 0x0, TLV_DB_SCALE_ITEM(1920, 0, 0),
539 0x1, 0x1, TLV_DB_SCALE_ITEM(2070, 0, 0),
540 0x2, 0x2, TLV_DB_SCALE_ITEM(2350, 0, 0),
541 0x3, 0x3, TLV_DB_SCALE_ITEM(2630, 0, 0),
542 );
543
544 /*
545 * DAC analog gain for TAS5720A-Q1. There are three discrete values to select from, ranging
546 * from 19.2 dB to 25.0dB.
547 */
548 static const DECLARE_TLV_DB_RANGE(dac_analog_tlv_a_q1,
549 0x0, 0x0, TLV_DB_SCALE_ITEM(1920, 0, 0),
550 0x1, 0x1, TLV_DB_SCALE_ITEM(2260, 0, 0),
551 0x2, 0x2, TLV_DB_SCALE_ITEM(2500, 0, 0),
552 );
553
554 /*
555 * DAC digital volumes. From -103.5 to 24 dB in 0.5 dB or 0.25 dB steps
556 * depending on the device. Note that setting the gain below -100 dB
557 * (register value <0x7) is effectively a MUTE as per device datasheet.
558 *
559 * Note that for the TAS5722 the digital volume controls are actually split
560 * over two registers, so we need custom getters/setters for access.
561 */
562 static DECLARE_TLV_DB_SCALE(tas5720_dac_tlv, -10350, 50, 0);
563 static DECLARE_TLV_DB_SCALE(tas5722_dac_tlv, -10350, 25, 0);
564
565 static int tas5722_volume_get(struct snd_kcontrol *kcontrol,
566 struct snd_ctl_elem_value *ucontrol)
567 {
568 struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
569 unsigned int val;
570
571 val = snd_soc_component_read(component, TAS5720_VOLUME_CTRL_REG);
572 ucontrol->value.integer.value[0] = val << 1;
573
574 val = snd_soc_component_read(component, TAS5722_DIGITAL_CTRL2_REG);
575 ucontrol->value.integer.value[0] |= val & TAS5722_VOL_CONTROL_LSB;
576
577 return 0;
578 }
579
580 static int tas5722_volume_set(struct snd_kcontrol *kcontrol,
581 struct snd_ctl_elem_value *ucontrol)
582 {
583 struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
584 unsigned int sel = ucontrol->value.integer.value[0];
585
586 snd_soc_component_write(component, TAS5720_VOLUME_CTRL_REG, sel >> 1);
587 snd_soc_component_update_bits(component, TAS5722_DIGITAL_CTRL2_REG,
588 TAS5722_VOL_CONTROL_LSB, sel);
589
590 return 0;
591 }
592
593 static const struct snd_kcontrol_new tas5720_snd_controls[] = {
594 SOC_SINGLE_TLV("Speaker Driver Playback Volume",
595 TAS5720_VOLUME_CTRL_REG, 0, 0xff, 0, tas5720_dac_tlv),
596 SOC_SINGLE_TLV("Speaker Driver Analog Gain", TAS5720_ANALOG_CTRL_REG,
597 TAS5720_ANALOG_GAIN_SHIFT, 3, 0, dac_analog_tlv),
598 };
599
600 static const struct snd_kcontrol_new tas5720a_q1_snd_controls[] = {
601 SOC_DOUBLE_R_TLV("Speaker Driver Playback Volume",
602 TAS5720_Q1_VOLUME_CTRL_LEFT_REG,
603 TAS5720_Q1_VOLUME_CTRL_RIGHT_REG,
604 0, 0xff, 0, tas5720_dac_tlv),
605 SOC_SINGLE_TLV("Speaker Driver Analog Gain", TAS5720_ANALOG_CTRL_REG,
606 TAS5720_ANALOG_GAIN_SHIFT, 3, 0, dac_analog_tlv_a_q1),
607 };
608
609 static const struct snd_kcontrol_new tas5722_snd_controls[] = {
610 SOC_SINGLE_EXT_TLV("Speaker Driver Playback Volume",
611 0, 0, 511, 0,
612 tas5722_volume_get, tas5722_volume_set,
613 tas5722_dac_tlv),
614 SOC_SINGLE_TLV("Speaker Driver Analog Gain", TAS5720_ANALOG_CTRL_REG,
615 TAS5720_ANALOG_GAIN_SHIFT, 3, 0, dac_analog_tlv),
616 };
617
618 static const struct snd_soc_dapm_widget tas5720_dapm_widgets[] = {
619 SND_SOC_DAPM_AIF_IN("DAC IN", "Playback", 0, SND_SOC_NOPM, 0, 0),
620 SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0, tas5720_dac_event,
621 SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
622 SND_SOC_DAPM_OUTPUT("OUT")
623 };
624
625 static const struct snd_soc_dapm_route tas5720_audio_map[] = {
626 { "DAC", NULL, "DAC IN" },
627 { "OUT", NULL, "DAC" },
628 };
629
630 static const struct snd_soc_component_driver soc_component_dev_tas5720 = {
631 .probe = tas5720_codec_probe,
632 .remove = tas5720_codec_remove,
633 .suspend = tas5720_suspend,
634 .resume = tas5720_resume,
635 .controls = tas5720_snd_controls,
636 .num_controls = ARRAY_SIZE(tas5720_snd_controls),
637 .dapm_widgets = tas5720_dapm_widgets,
638 .num_dapm_widgets = ARRAY_SIZE(tas5720_dapm_widgets),
639 .dapm_routes = tas5720_audio_map,
640 .num_dapm_routes = ARRAY_SIZE(tas5720_audio_map),
641 .idle_bias_on = 1,
642 .use_pmdown_time = 1,
643 .endianness = 1,
644 };
645
646 static const struct snd_soc_component_driver soc_component_dev_tas5720_a_q1 = {
647 .probe = tas5720_codec_probe,
648 .remove = tas5720_codec_remove,
649 .suspend = tas5720_suspend,
650 .resume = tas5720_resume,
651 .controls = tas5720a_q1_snd_controls,
652 .num_controls = ARRAY_SIZE(tas5720a_q1_snd_controls),
653 .dapm_widgets = tas5720_dapm_widgets,
654 .num_dapm_widgets = ARRAY_SIZE(tas5720_dapm_widgets),
655 .dapm_routes = tas5720_audio_map,
656 .num_dapm_routes = ARRAY_SIZE(tas5720_audio_map),
657 .idle_bias_on = 1,
658 .use_pmdown_time = 1,
659 .endianness = 1,
660 };
661
662 static const struct snd_soc_component_driver soc_component_dev_tas5722 = {
663 .probe = tas5720_codec_probe,
664 .remove = tas5720_codec_remove,
665 .suspend = tas5720_suspend,
666 .resume = tas5720_resume,
667 .controls = tas5722_snd_controls,
668 .num_controls = ARRAY_SIZE(tas5722_snd_controls),
669 .dapm_widgets = tas5720_dapm_widgets,
670 .num_dapm_widgets = ARRAY_SIZE(tas5720_dapm_widgets),
671 .dapm_routes = tas5720_audio_map,
672 .num_dapm_routes = ARRAY_SIZE(tas5720_audio_map),
673 .idle_bias_on = 1,
674 .use_pmdown_time = 1,
675 .endianness = 1,
676 };
677
678 /* PCM rates supported by the TAS5720 driver */
679 #define TAS5720_RATES (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\
680 SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
681
682 /* Formats supported by TAS5720 driver */
683 #define TAS5720_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S18_3LE |\
684 SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE)
685
686 static const struct snd_soc_dai_ops tas5720_speaker_dai_ops = {
687 .hw_params = tas5720_hw_params,
688 .set_fmt = tas5720_set_dai_fmt,
689 .set_tdm_slot = tas5720_set_dai_tdm_slot,
690 .mute_stream = tas5720_mute,
691 .no_capture_mute = 1,
692 };
693
694 /*
695 * TAS5720 DAI structure
696 *
697 * Note that were are advertising .playback.channels_max = 2 despite this being
698 * a mono amplifier. The reason for that is that some serial ports such as TI's
699 * McASP module have a minimum number of channels (2) that they can output.
700 * Advertising more channels than we have will allow us to interface with such
701 * a serial port without really any negative side effects as the TAS5720 will
702 * simply ignore any extra channel(s) asides from the one channel that is
703 * configured to be played back.
704 */
705 static struct snd_soc_dai_driver tas5720_dai[] = {
706 {
707 .name = "tas5720-amplifier",
708 .playback = {
709 .stream_name = "Playback",
710 .channels_min = 1,
711 .channels_max = 2,
712 .rates = TAS5720_RATES,
713 .formats = TAS5720_FORMATS,
714 },
715 .ops = &tas5720_speaker_dai_ops,
716 },
717 };
718
719 static const struct i2c_device_id tas5720_id[] = {
720 { "tas5720", TAS5720 },
721 { "tas5720a-q1", TAS5720A_Q1 },
722 { "tas5722", TAS5722 },
723 { }
724 };
725 MODULE_DEVICE_TABLE(i2c, tas5720_id);
726
727 static int tas5720_probe(struct i2c_client *client)
728 {
729 struct device *dev = &client->dev;
730 struct tas5720_data *data;
731 const struct regmap_config *regmap_config;
732 const struct i2c_device_id *id;
733 int ret;
734 int i;
735
736 data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
737 if (!data)
738 return -ENOMEM;
739
740 id = i2c_match_id(tas5720_id, client);
741 data->tas5720_client = client;
742 data->devtype = id->driver_data;
743
744 switch (id->driver_data) {
745 case TAS5720:
746 regmap_config = &tas5720_regmap_config;
747 break;
748 case TAS5720A_Q1:
749 regmap_config = &tas5720a_q1_regmap_config;
750 break;
751 case TAS5722:
752 regmap_config = &tas5722_regmap_config;
753 break;
754 default:
755 dev_err(dev, "unexpected private driver data\n");
756 return -EINVAL;
757 }
758 data->regmap = devm_regmap_init_i2c(client, regmap_config);
759 if (IS_ERR(data->regmap)) {
760 ret = PTR_ERR(data->regmap);
761 dev_err(dev, "failed to allocate register map: %d\n", ret);
762 return ret;
763 }
764
765 for (i = 0; i < ARRAY_SIZE(data->supplies); i++)
766 data->supplies[i].supply = tas5720_supply_names[i];
767
768 ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->supplies),
769 data->supplies);
770 if (ret != 0) {
771 dev_err(dev, "failed to request supplies: %d\n", ret);
772 return ret;
773 }
774
775 dev_set_drvdata(dev, data);
776
777 switch (id->driver_data) {
778 case TAS5720:
779 ret = devm_snd_soc_register_component(&client->dev,
780 &soc_component_dev_tas5720,
781 tas5720_dai,
782 ARRAY_SIZE(tas5720_dai));
783 break;
784 case TAS5720A_Q1:
785 ret = devm_snd_soc_register_component(&client->dev,
786 &soc_component_dev_tas5720_a_q1,
787 tas5720_dai,
788 ARRAY_SIZE(tas5720_dai));
789 break;
790 case TAS5722:
791 ret = devm_snd_soc_register_component(&client->dev,
792 &soc_component_dev_tas5722,
793 tas5720_dai,
794 ARRAY_SIZE(tas5720_dai));
795 break;
796 default:
797 dev_err(dev, "unexpected private driver data\n");
798 return -EINVAL;
799 }
800 if (ret < 0) {
801 dev_err(dev, "failed to register component: %d\n", ret);
802 return ret;
803 }
804
805 return 0;
806 }
807
808 #if IS_ENABLED(CONFIG_OF)
809 static const struct of_device_id tas5720_of_match[] = {
810 { .compatible = "ti,tas5720", },
811 { .compatible = "ti,tas5720a-q1", },
812 { .compatible = "ti,tas5722", },
813 { },
814 };
815 MODULE_DEVICE_TABLE(of, tas5720_of_match);
816 #endif
817
818 static struct i2c_driver tas5720_i2c_driver = {
819 .driver = {
820 .name = "tas5720",
821 .of_match_table = of_match_ptr(tas5720_of_match),
822 },
823 .probe = tas5720_probe,
824 .id_table = tas5720_id,
825 };
826
827 module_i2c_driver(tas5720_i2c_driver);
828
829 MODULE_AUTHOR("Andreas Dannenberg <dannenberg@ti.com>");
830 MODULE_DESCRIPTION("TAS5720 Audio amplifier driver");
831 MODULE_LICENSE("GPL");
832
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.