1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Line 6 Linux USB driver
4 *
5 * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
6 */
7
8 #include <linux/slab.h>
9 #include <linux/wait.h>
10 #include <linux/interrupt.h>
11 #include <linux/module.h>
12 #include <linux/usb.h>
13
14 #include <sound/core.h>
15 #include <sound/control.h>
16
17 #include "capture.h"
18 #include "driver.h"
19 #include "playback.h"
20
21 /*
22 Locate name in binary program dump
23 */
24 #define POD_NAME_OFFSET 0
25 #define POD_NAME_LENGTH 16
26
27 /*
28 Other constants
29 */
30 #define POD_CONTROL_SIZE 0x80
31 #define POD_BUFSIZE_DUMPREQ 7
32 #define POD_STARTUP_DELAY 1000
33
34 /*
35 Stages of POD startup procedure
36 */
37 enum {
38 POD_STARTUP_VERSIONREQ,
39 POD_STARTUP_SETUP,
40 POD_STARTUP_DONE,
41 };
42
43 enum {
44 LINE6_BASSPODXT,
45 LINE6_BASSPODXTLIVE,
46 LINE6_BASSPODXTPRO,
47 LINE6_POCKETPOD,
48 LINE6_PODXT,
49 LINE6_PODXTLIVE_POD,
50 LINE6_PODXTPRO,
51 };
52
53 struct usb_line6_pod {
54 /* Generic Line 6 USB data */
55 struct usb_line6 line6;
56
57 /* Instrument monitor level */
58 int monitor_level;
59
60 /* Current progress in startup procedure */
61 int startup_progress;
62
63 /* Serial number of device */
64 u32 serial_number;
65
66 /* Firmware version (x 100) */
67 int firmware_version;
68
69 /* Device ID */
70 int device_id;
71 };
72
73 #define line6_to_pod(x) container_of(x, struct usb_line6_pod, line6)
74
75 #define POD_SYSEX_CODE 3
76
77 /* *INDENT-OFF* */
78
79 enum {
80 POD_SYSEX_SAVE = 0x24,
81 POD_SYSEX_SYSTEM = 0x56,
82 POD_SYSEX_SYSTEMREQ = 0x57,
83 /* POD_SYSEX_UPDATE = 0x6c, */ /* software update! */
84 POD_SYSEX_STORE = 0x71,
85 POD_SYSEX_FINISH = 0x72,
86 POD_SYSEX_DUMPMEM = 0x73,
87 POD_SYSEX_DUMP = 0x74,
88 POD_SYSEX_DUMPREQ = 0x75
89
90 /* dumps entire internal memory of PODxt Pro */
91 /* POD_SYSEX_DUMPMEM2 = 0x76 */
92 };
93
94 enum {
95 POD_MONITOR_LEVEL = 0x04,
96 POD_SYSTEM_INVALID = 0x10000
97 };
98
99 /* *INDENT-ON* */
100
101 enum {
102 POD_DUMP_MEMORY = 2
103 };
104
105 enum {
106 POD_BUSY_READ,
107 POD_BUSY_WRITE,
108 POD_CHANNEL_DIRTY,
109 POD_SAVE_PRESSED,
110 POD_BUSY_MIDISEND
111 };
112
113 static const struct snd_ratden pod_ratden = {
114 .num_min = 78125,
115 .num_max = 78125,
116 .num_step = 1,
117 .den = 2
118 };
119
120 static struct line6_pcm_properties pod_pcm_properties = {
121 .playback_hw = {
122 .info = (SNDRV_PCM_INFO_MMAP |
123 SNDRV_PCM_INFO_INTERLEAVED |
124 SNDRV_PCM_INFO_BLOCK_TRANSFER |
125 SNDRV_PCM_INFO_MMAP_VALID |
126 SNDRV_PCM_INFO_PAUSE |
127 SNDRV_PCM_INFO_SYNC_START),
128 .formats = SNDRV_PCM_FMTBIT_S24_3LE,
129 .rates = SNDRV_PCM_RATE_KNOT,
130 .rate_min = 39062,
131 .rate_max = 39063,
132 .channels_min = 2,
133 .channels_max = 2,
134 .buffer_bytes_max = 60000,
135 .period_bytes_min = 64,
136 .period_bytes_max = 8192,
137 .periods_min = 1,
138 .periods_max = 1024},
139 .capture_hw = {
140 .info = (SNDRV_PCM_INFO_MMAP |
141 SNDRV_PCM_INFO_INTERLEAVED |
142 SNDRV_PCM_INFO_BLOCK_TRANSFER |
143 SNDRV_PCM_INFO_MMAP_VALID |
144 SNDRV_PCM_INFO_SYNC_START),
145 .formats = SNDRV_PCM_FMTBIT_S24_3LE,
146 .rates = SNDRV_PCM_RATE_KNOT,
147 .rate_min = 39062,
148 .rate_max = 39063,
149 .channels_min = 2,
150 .channels_max = 2,
151 .buffer_bytes_max = 60000,
152 .period_bytes_min = 64,
153 .period_bytes_max = 8192,
154 .periods_min = 1,
155 .periods_max = 1024},
156 .rates = {
157 .nrats = 1,
158 .rats = &pod_ratden},
159 .bytes_per_channel = 3 /* SNDRV_PCM_FMTBIT_S24_3LE */
160 };
161
162
163 static const char pod_version_header[] = {
164 0xf0, 0x7e, 0x7f, 0x06, 0x02
165 };
166
167 static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code,
168 int size)
169 {
170 return line6_alloc_sysex_buffer(&pod->line6, POD_SYSEX_CODE, code,
171 size);
172 }
173
174 /*
175 Process a completely received message.
176 */
177 static void line6_pod_process_message(struct usb_line6 *line6)
178 {
179 struct usb_line6_pod *pod = line6_to_pod(line6);
180 const unsigned char *buf = pod->line6.buffer_message;
181
182 if (memcmp(buf, pod_version_header, sizeof(pod_version_header)) == 0) {
183 pod->firmware_version = buf[13] * 100 + buf[14] * 10 + buf[15];
184 pod->device_id = ((int)buf[8] << 16) | ((int)buf[9] << 8) |
185 (int) buf[10];
186 if (pod->startup_progress == POD_STARTUP_VERSIONREQ) {
187 pod->startup_progress = POD_STARTUP_SETUP;
188 schedule_delayed_work(&line6->startup_work, 0);
189 }
190 return;
191 }
192
193 /* Only look for sysex messages from this device */
194 if (buf[0] != (LINE6_SYSEX_BEGIN | LINE6_CHANNEL_DEVICE) &&
195 buf[0] != (LINE6_SYSEX_BEGIN | LINE6_CHANNEL_UNKNOWN)) {
196 return;
197 }
198 if (memcmp(buf + 1, line6_midi_id, sizeof(line6_midi_id)) != 0)
199 return;
200
201 if (buf[5] == POD_SYSEX_SYSTEM && buf[6] == POD_MONITOR_LEVEL) {
202 short value = ((int)buf[7] << 12) | ((int)buf[8] << 8) |
203 ((int)buf[9] << 4) | (int)buf[10];
204 pod->monitor_level = value;
205 }
206 }
207
208 /*
209 Send system parameter (from integer).
210 */
211 static int pod_set_system_param_int(struct usb_line6_pod *pod, int value,
212 int code)
213 {
214 char *sysex;
215 static const int size = 5;
216
217 sysex = pod_alloc_sysex_buffer(pod, POD_SYSEX_SYSTEM, size);
218 if (!sysex)
219 return -ENOMEM;
220 sysex[SYSEX_DATA_OFS] = code;
221 sysex[SYSEX_DATA_OFS + 1] = (value >> 12) & 0x0f;
222 sysex[SYSEX_DATA_OFS + 2] = (value >> 8) & 0x0f;
223 sysex[SYSEX_DATA_OFS + 3] = (value >> 4) & 0x0f;
224 sysex[SYSEX_DATA_OFS + 4] = (value) & 0x0f;
225 line6_send_sysex_message(&pod->line6, sysex, size);
226 kfree(sysex);
227 return 0;
228 }
229
230 /*
231 "read" request on "serial_number" special file.
232 */
233 static ssize_t serial_number_show(struct device *dev,
234 struct device_attribute *attr, char *buf)
235 {
236 struct snd_card *card = dev_to_snd_card(dev);
237 struct usb_line6_pod *pod = card->private_data;
238
239 return sysfs_emit(buf, "%u\n", pod->serial_number);
240 }
241
242 /*
243 "read" request on "firmware_version" special file.
244 */
245 static ssize_t firmware_version_show(struct device *dev,
246 struct device_attribute *attr, char *buf)
247 {
248 struct snd_card *card = dev_to_snd_card(dev);
249 struct usb_line6_pod *pod = card->private_data;
250
251 return sysfs_emit(buf, "%d.%02d\n", pod->firmware_version / 100,
252 pod->firmware_version % 100);
253 }
254
255 /*
256 "read" request on "device_id" special file.
257 */
258 static ssize_t device_id_show(struct device *dev,
259 struct device_attribute *attr, char *buf)
260 {
261 struct snd_card *card = dev_to_snd_card(dev);
262 struct usb_line6_pod *pod = card->private_data;
263
264 return sysfs_emit(buf, "%d\n", pod->device_id);
265 }
266
267 /*
268 POD startup procedure.
269 This is a sequence of functions with special requirements (e.g., must
270 not run immediately after initialization, must not run in interrupt
271 context). After the last one has finished, the device is ready to use.
272 */
273
274 static void pod_startup(struct usb_line6 *line6)
275 {
276 struct usb_line6_pod *pod = line6_to_pod(line6);
277
278 switch (pod->startup_progress) {
279 case POD_STARTUP_VERSIONREQ:
280 /* request firmware version: */
281 line6_version_request_async(line6);
282 break;
283 case POD_STARTUP_SETUP:
284 /* serial number: */
285 line6_read_serial_number(&pod->line6, &pod->serial_number);
286
287 /* ALSA audio interface: */
288 if (snd_card_register(line6->card))
289 dev_err(line6->ifcdev, "Failed to register POD card.\n");
290 pod->startup_progress = POD_STARTUP_DONE;
291 break;
292 default:
293 break;
294 }
295 }
296
297 /* POD special files: */
298 static DEVICE_ATTR_RO(device_id);
299 static DEVICE_ATTR_RO(firmware_version);
300 static DEVICE_ATTR_RO(serial_number);
301
302 static struct attribute *pod_dev_attrs[] = {
303 &dev_attr_device_id.attr,
304 &dev_attr_firmware_version.attr,
305 &dev_attr_serial_number.attr,
306 NULL
307 };
308
309 static const struct attribute_group pod_dev_attr_group = {
310 .name = "pod",
311 .attrs = pod_dev_attrs,
312 };
313
314 /* control info callback */
315 static int snd_pod_control_monitor_info(struct snd_kcontrol *kcontrol,
316 struct snd_ctl_elem_info *uinfo)
317 {
318 uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
319 uinfo->count = 1;
320 uinfo->value.integer.min = 0;
321 uinfo->value.integer.max = 65535;
322 return 0;
323 }
324
325 /* control get callback */
326 static int snd_pod_control_monitor_get(struct snd_kcontrol *kcontrol,
327 struct snd_ctl_elem_value *ucontrol)
328 {
329 struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
330 struct usb_line6_pod *pod = line6_to_pod(line6pcm->line6);
331
332 ucontrol->value.integer.value[0] = pod->monitor_level;
333 return 0;
334 }
335
336 /* control put callback */
337 static int snd_pod_control_monitor_put(struct snd_kcontrol *kcontrol,
338 struct snd_ctl_elem_value *ucontrol)
339 {
340 struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
341 struct usb_line6_pod *pod = line6_to_pod(line6pcm->line6);
342
343 if (ucontrol->value.integer.value[0] == pod->monitor_level)
344 return 0;
345
346 pod->monitor_level = ucontrol->value.integer.value[0];
347 pod_set_system_param_int(pod, ucontrol->value.integer.value[0],
348 POD_MONITOR_LEVEL);
349 return 1;
350 }
351
352 /* control definition */
353 static const struct snd_kcontrol_new pod_control_monitor = {
354 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
355 .name = "Monitor Playback Volume",
356 .index = 0,
357 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
358 .info = snd_pod_control_monitor_info,
359 .get = snd_pod_control_monitor_get,
360 .put = snd_pod_control_monitor_put
361 };
362
363 /*
364 Try to init POD device.
365 */
366 static int pod_init(struct usb_line6 *line6,
367 const struct usb_device_id *id)
368 {
369 int err;
370 struct usb_line6_pod *pod = line6_to_pod(line6);
371
372 line6->process_message = line6_pod_process_message;
373 line6->startup = pod_startup;
374
375 /* create sysfs entries: */
376 err = snd_card_add_dev_attr(line6->card, &pod_dev_attr_group);
377 if (err < 0)
378 return err;
379
380 /* initialize PCM subsystem: */
381 err = line6_init_pcm(line6, &pod_pcm_properties);
382 if (err < 0)
383 return err;
384
385 /* register monitor control: */
386 err = snd_ctl_add(line6->card,
387 snd_ctl_new1(&pod_control_monitor, line6->line6pcm));
388 if (err < 0)
389 return err;
390
391 /*
392 When the sound card is registered at this point, the PODxt Live
393 displays "Invalid Code Error 07", so we do it later in the event
394 handler.
395 */
396
397 if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL) {
398 pod->monitor_level = POD_SYSTEM_INVALID;
399
400 /* initiate startup procedure: */
401 schedule_delayed_work(&line6->startup_work,
402 msecs_to_jiffies(POD_STARTUP_DELAY));
403 }
404
405 return 0;
406 }
407
408 #define LINE6_DEVICE(prod) USB_DEVICE(0x0e41, prod)
409 #define LINE6_IF_NUM(prod, n) USB_DEVICE_INTERFACE_NUMBER(0x0e41, prod, n)
410
411 /* table of devices that work with this driver */
412 static const struct usb_device_id pod_id_table[] = {
413 { LINE6_DEVICE(0x4250), .driver_info = LINE6_BASSPODXT },
414 { LINE6_DEVICE(0x4642), .driver_info = LINE6_BASSPODXTLIVE },
415 { LINE6_DEVICE(0x4252), .driver_info = LINE6_BASSPODXTPRO },
416 { LINE6_IF_NUM(0x5051, 1), .driver_info = LINE6_POCKETPOD },
417 { LINE6_DEVICE(0x5044), .driver_info = LINE6_PODXT },
418 { LINE6_IF_NUM(0x4650, 0), .driver_info = LINE6_PODXTLIVE_POD },
419 { LINE6_DEVICE(0x5050), .driver_info = LINE6_PODXTPRO },
420 {}
421 };
422
423 MODULE_DEVICE_TABLE(usb, pod_id_table);
424
425 static const struct line6_properties pod_properties_table[] = {
426 [LINE6_BASSPODXT] = {
427 .id = "BassPODxt",
428 .name = "BassPODxt",
429 .capabilities = LINE6_CAP_CONTROL
430 | LINE6_CAP_CONTROL_MIDI
431 | LINE6_CAP_PCM
432 | LINE6_CAP_HWMON,
433 .altsetting = 5,
434 .ep_ctrl_r = 0x84,
435 .ep_ctrl_w = 0x03,
436 .ep_audio_r = 0x82,
437 .ep_audio_w = 0x01,
438 },
439 [LINE6_BASSPODXTLIVE] = {
440 .id = "BassPODxtLive",
441 .name = "BassPODxt Live",
442 .capabilities = LINE6_CAP_CONTROL
443 | LINE6_CAP_CONTROL_MIDI
444 | LINE6_CAP_PCM
445 | LINE6_CAP_HWMON,
446 .altsetting = 1,
447 .ep_ctrl_r = 0x84,
448 .ep_ctrl_w = 0x03,
449 .ep_audio_r = 0x82,
450 .ep_audio_w = 0x01,
451 },
452 [LINE6_BASSPODXTPRO] = {
453 .id = "BassPODxtPro",
454 .name = "BassPODxt Pro",
455 .capabilities = LINE6_CAP_CONTROL
456 | LINE6_CAP_CONTROL_MIDI
457 | LINE6_CAP_PCM
458 | LINE6_CAP_HWMON,
459 .altsetting = 5,
460 .ep_ctrl_r = 0x84,
461 .ep_ctrl_w = 0x03,
462 .ep_audio_r = 0x82,
463 .ep_audio_w = 0x01,
464 },
465 [LINE6_POCKETPOD] = {
466 .id = "PocketPOD",
467 .name = "Pocket POD",
468 .capabilities = LINE6_CAP_CONTROL
469 | LINE6_CAP_CONTROL_MIDI,
470 .altsetting = 0,
471 .ep_ctrl_r = 0x82,
472 .ep_ctrl_w = 0x02,
473 /* no audio channel */
474 },
475 [LINE6_PODXT] = {
476 .id = "PODxt",
477 .name = "PODxt",
478 .capabilities = LINE6_CAP_CONTROL
479 | LINE6_CAP_CONTROL_MIDI
480 | LINE6_CAP_PCM
481 | LINE6_CAP_HWMON,
482 .altsetting = 5,
483 .ep_ctrl_r = 0x84,
484 .ep_ctrl_w = 0x03,
485 .ep_audio_r = 0x82,
486 .ep_audio_w = 0x01,
487 },
488 [LINE6_PODXTLIVE_POD] = {
489 .id = "PODxtLive",
490 .name = "PODxt Live",
491 .capabilities = LINE6_CAP_CONTROL
492 | LINE6_CAP_CONTROL_MIDI
493 | LINE6_CAP_PCM
494 | LINE6_CAP_HWMON,
495 .altsetting = 1,
496 .ep_ctrl_r = 0x84,
497 .ep_ctrl_w = 0x03,
498 .ep_audio_r = 0x82,
499 .ep_audio_w = 0x01,
500 },
501 [LINE6_PODXTPRO] = {
502 .id = "PODxtPro",
503 .name = "PODxt Pro",
504 .capabilities = LINE6_CAP_CONTROL
505 | LINE6_CAP_CONTROL_MIDI
506 | LINE6_CAP_PCM
507 | LINE6_CAP_HWMON,
508 .altsetting = 5,
509 .ep_ctrl_r = 0x84,
510 .ep_ctrl_w = 0x03,
511 .ep_audio_r = 0x82,
512 .ep_audio_w = 0x01,
513 },
514 };
515
516 /*
517 Probe USB device.
518 */
519 static int pod_probe(struct usb_interface *interface,
520 const struct usb_device_id *id)
521 {
522 return line6_probe(interface, id, "Line6-POD",
523 &pod_properties_table[id->driver_info],
524 pod_init, sizeof(struct usb_line6_pod));
525 }
526
527 static struct usb_driver pod_driver = {
528 .name = KBUILD_MODNAME,
529 .probe = pod_probe,
530 .disconnect = line6_disconnect,
531 #ifdef CONFIG_PM
532 .suspend = line6_suspend,
533 .resume = line6_resume,
534 .reset_resume = line6_resume,
535 #endif
536 .id_table = pod_id_table,
537 };
538
539 module_usb_driver(pod_driver);
540
541 MODULE_DESCRIPTION("Line 6 POD USB driver");
542 MODULE_LICENSE("GPL");
543
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.